Sony ZV1 and ZV-e10External Power for Zoom, LiveStreaming and YouTube

[@TechTravelBeyond]

Do you have a ZV1? What other tips do you have for this camera?

[@floodcitygtv5171]

It is a tremendous camera Best I’ve ever had. I use it as my main streaming camera. It is also excellent for vlogging, Pictures & Videos (with the right lens attachments) It’s shines in low light, so much so that I don’t have to use hardly any background lighting. The price for this camera is excellent too. I think I paid less than $800 with a lens kit. When I stream I keep it plugged in so the battery stays charged up no matter how long I’m streaming. This camera has size on its side to cause it’s really easy to handle and travel with. I mean Sony just knocked this one out of the park.

[@floodcitygtv5171]

Best explanation of how to use this camera I've seen so far.

[@TechTravelBeyond]

Glad this helped!

[@Marla-Beck]

@@TechTravelBeyond simple & clear - thanks so much!

[@MarekMessany]

Dear TechTravelBeyond, I would like to thank you very much for your great help on this topic! You have turn my zv1 into streaming monster! :) Dummy battery is so great!

[@TechTravelBeyond]

That's what I use for all my in-studio videos now. That way I'm not changing batteries while I film. Thanks for watching!

[@MarketManiaCA]

I've found whilst using zoom or streamyard that the ZV1 when hooked up via USB power lasts about 2hrs then exhausts the battery. I think I'm going to get the dummy battery and shell. Thanks for this video

[@TechTravelBeyond]

The dummy battery works best. I use it for filming all my videos, and I don't have to worry about charging batteries. Thanks for watching!

[@chrismantonuk]

Nice, thanks. Just for anyone wondering - this also works with the ZV E10 (the interchangeable lens model)

[@TechTravelBeyond]

It sure does! Thanks for watching!

[@TheTimeCrunchedTeacher]

I really appreciate you showing all the options and the benefits/limitations of each. Thank you!!!

[@TechTravelBeyond]

I appreciate teachers! Thanks for watching!

[@RealJustinZiegler]

I shoot with the Sony ZV1, and the parrot teleprompter on a tripod. I have a small rig case for the ZV1 to allow easy batter removal when it's on the tripod. What rig do I need to buy so I can hold the external battery back, and an external mic receiver, while I'm shooting with the Sony zv1? Thx.

[@TechTravelBeyond]

Check out this video for external power: kzbin.info/www/bejne/aIXZYauGjbhsfdU I connect this way to external power when I'm filming, and the USB plug fits into the power bar I use for my lights and iPhone when I film. My camera is on for the filming session without worry about batteries. Since you have a cage, you can keep the SD/Battery compartment door open for the cable and access to SD card for changes.

[@MyCancerChicBlog]

This is exactly what I needed. I couldn't figure out how to access the battery space while mounted.

[@TechTravelBeyond]

Yes! The ZV1 battery compartment doesn’t have a cord pass through like some other Sony cameras so this is how I use it with a dummy battery!

[@imsoRAyoutube]

Dope video. Bought both products immediately!

[@TechTravelBeyond]

Cool! I just used this setup for filming a new video! No need for battery changes during the 1 hour filming session! Thanks for watching. 👍

[@trippontwowheels]

Your video hit the spot. Short and sweet and solved my exact problem. I ordered both the dummy battery and camera base using your link as well. Thanks much!

[@TechTravelBeyond]

Hey Tripp! Glad this helped, and thanks for watching!

[@floodcitygtv5171]

By the way I have the Sony ZV-E10 not the ZV1.

[@SaraBest]

So helpful! Thank you! I love my Sony zv1 but the short battery life is driving me crazy! Going to try some of the hacks you suggested here!

[@TechTravelBeyond]

Best bet: the dummy battery. I use it for hours filming for this channel, and I’ve used it for some classes I’ve taken via Zoom.

[@ktravers]

Thanks Chuck. Your video quality rocks!

[@TechTravelBeyond]

Thank You, Kevin!

[@PaulCrousePhoto]

OMG!!! Thank you! Thank you! Thank you!!! The ZV1 has the amazing ability to power down during my best take. 😂

[@TechTravelBeyond]

That happened to me, so this method works for filming for this channel!

[@lavin1662]

Sir you really are a genius.. you saved soooo many hours of waste

[@TechTravelBeyond]

So glad this helped, Lavin! Thanks for watching! 👍

[@r-omega]

Awesome video, so helpful. I'm definitely getting the tripod adapter for access to the battery door and the dummy battery!

[@TechTravelBeyond]

Just used it last week for the DJI Mic video! Thanks for watching!

[@bobpaulson9r72fk24]

Thanks man! Really appreciate the video. Clear and concise. Great video. Your lighting looks great too. I was shooting some video and came across this issue of it powering down.

[@TechTravelBeyond]

Thanks for your awesome comment! So glad this helped, and let me know if there’s something you’d like to know more about! Thanks for watching!

[@Feliztividad]

Thanks! So helpful and concise.

[@TechTravelBeyond]

Thanks for letting me know this helped you, and thanks for watching!

[@Appmyhome]

Great tips. Especially that base unit.

[@TechTravelBeyond]

Thank you!

[@yangyangcheng9781]

Really awesome video, short concise and clear! I have a quick question. Since the power cable already uses one mini-usb port, what should we do (or buy) so we can still use the camera as a webcam? Thank you for your help!

[@TechTravelBeyond]

Watch at 3:00 in this video. Get the dummy battery. Also, for better resolution, use a video capture card. You’ll get better resolution, less processing/lag from your computer. I made a video about the too! Thanks for watching.

[@yangyangcoach]

@@TechTravelBeyond Thanks a lot! Your content is amazing!

[@dsnetja263]

Thank you for your video. Do you know perhaps how long can you record in 4k and in fhd ? Any limits then?

[@TechTravelBeyond]

While you will have hours of power if you use the camera plugged in to external power, you are limited to the capacity of your SD card. Remember too, due to the limitations of how files are written to SD cards, they may be split into separate files which you can merge together in your editing program.

[@Knit-A-Rainbow]

Thank you so very much! I was so frustrated by not being able to use my ZV-1 for zoom!

[@TechTravelBeyond]

So glad this helps! Thanks for watching, and keep in knitting those cool colors!

[@HauntJaunts]

Hello! I loved your video because it answered a question apparently we all have. Except I’m a little confused…if I plug the camera right into my laptop to use for Zoom, even with USB charging on I have to have another cable connected to a power source to keep the USB charging working too? Thanks in advance for any help!

[@TechTravelBeyond]

Hi! Glad this helped. Use the dummy battery option I showed as the last option, and it will stay on the entire time.

[@HauntJaunts]

@@TechTravelBeyond thanks you! 😊

[@theuntamablemane]

Hi! So to record videos for KZbin. You just use a cord that came with the camera and what else? I’m missing that part lol do you have a link? Also I bought my camera second hand. I don’t think it came with a cord 😩

[@TechTravelBeyond]

Here's all the stuff you might need for your camera! This is what I currently use when in-studio or on the go with just the ZV-1: kit.co/techtravelbeyond/sony-zv-1-youtube-kit

[@alexjimenez7396]

Hey @TechTravelBeyond is this method still working for you? I am on zoom calls for about 8 hours a day. I heard horror stories of the dummy battery method frying cameras, have you ran into this issue with this method? And how can I prevent that from occurring? Also, can you recommend a cube to purchase that is good to plug into a wall outlet? Thank you for the awesome video!!

[@TechTravelBeyond]

You have to really read the instructions for the dummy battery. It says not go use any adapter over 5 volts. If you do, you will definitely fry the camera, and they emphasize this in red with the included instructions. If you use the plug which came with the camera, then you'd be good to go!

[@Vladimirulz]

You're the best, Mr. Tech! thanks 🤓

[@TechTravelBeyond]

After a long day of house maintenance, your comment made my night. Thanks for watching!

[@thescrubslife]

This was so helpful. Thank you!

[@TechTravelBeyond]

Cool! Glad it helped and thanks for watching!

[@FrontiersmanAdventures]

Thanks for the video! I ordered the bracket, the dummy battery, and the ulanzi tripod! I have been using a logitech web cam, which is ok, but the picture quality of the SV-1 will certainly do much better. Hopefully, after Thursday's livestream, the stuff I ordered will be here and I can start preparing for my next video with the SV-1.

[@TechTravelBeyond]

Hope this helped you with your stream! Thanks for watcing!

[@kbracken4805]

Thank for the info, do you have links for the Dummy Battery and the bracket?

[@TechTravelBeyond]

Yes! They’re in the description of this video.

[@rlmk1101]

Hi! With regards to using the power bank, I believe you are referring to the normal power bank that is rated at 5 volts output? Appreciate your advice. Thanks!

[@TechTravelBeyond]

Hi Ron! Yes. You cannot exceed 5 volts max output because you can burn out the circuitry in your ZV1 or other Sony A6xxx cameras. This is the one I currently use and it doesn't need an external charging cable: amzn.to/3J9ySIO It's also linked in the descrription Thank for watching!

[@rach7189]

Great video. Is there a reason why you prefer the dummy battery over just plugging the usb cable into a wall outlet like in your first example? Is one better than the other?

[@TechTravelBeyond]

Yes, there is! When you use the USB method, you'll need to have a fully charged battery so the camera doesn't go into a charge cycle. When it does, it sometimes will shut the camera off because it exhausts the battery first before charging the battery. It can happen in the middle of shooting. The wired external battery replacement makes the camera think the power is just coming from a battery, and will never shut down until you turn it off or unplug it. Thanks for watching!

[@rach7189]

@@TechTravelBeyond thank you! I've needed this explanation, was on the fence about getting a dummy battery. This helps me so much.

[@MieGallery]

Thanks - very helpful!

[@TechTravelBeyond]

Thanks for watching!

[@WeAreUX]

Question! When I charge the sony zv-1 during filming (and using an external mic with the mic input) I do get a humming sound through my whole video. How do you prevent this?

[@TechTravelBeyond]

It may be your mic cable. If you’re using a long cable run and the mic doesn’t have a power source, a small hum will be in the background. I use the Rode Wireless Go and attach the lavaliere to the transmitter if I’m far from the camera and I don’t have the hum issue.

[@ypl236]

So helpful, thank you!

[@TechTravelBeyond]

Cool! Glad this helped you, and thanks for watching! 😉

[@kevinpowers9024]

The power cord to my ZV 1 is causing a buzzing sound during playback. I tried plugging it into different outlets and still gets a buzz. There is no buzzing without the cord. The sound is nice and clear. Would a battery pack solve this? I want to do interviews with veterans and cant have any buzzing in the audio. I need enough power for about an hour and a half and I really don't want to have to stop the interview to change batteries.

[@chuckgspins1146]

Hi Kevin! An external battery pack may solve the issue. Also, the dummy battery is the best bet for a longer session. It sounds like there may be issues with your camera cord, or perhaps the electrical lines in your home. Hard to tell from afar. As far as the battery, make sure it’s mah rating is 3-4 times the capacity of the ZV1 battery and you may eek out the power you need. I’ve had my camera on longer with the dummy battery.

[@TechTravelBeyond]

What he said above! (g) Thanks for watching.

[@SignsoftheTimes911]

Is it better to plug the dummy battery into a wall outlet or laptop? Could I possibly fry the zv1 if the dummy battery is plugged into a wall outlet? Thanks for the video.

[@TechTravelBeyond]

You can plug the dummy battery into a USB charger like the one that came with your camera. Make sure the voltage output doesn’t exceed 5 volts as the included instructions say in the warnings.

[@adamw1944]

Can you explain to me how you pass the dummy battery cable through the door? Thank you.

[@TechTravelBeyond]

Since you'll have your camera on a tripod for streaming, you simply just leave the door open. I use it that way with this bracket: amzn.to/3XWV816 Thanks for watching!

[@adamw1944]

@@TechTravelBeyond Pity that designers didn't introduced a small cut out in the door to pass the cable.

[@godprovideth]

Ive got a question. I purchased an Anker Powercore III 20K powerbank, with fast-charging technology. Is there any chance this will fry my ZV1?

[@TechTravelBeyond]

As long as the output of the port you’re using is no higher than 5 volts, you’re good. Anything higher is more than the camera electronics can handle.

[@lulitaviolino]

The anker powercore It’s not longer available. What could be another alternative? Thanks!

[@TechTravelBeyond]

Hi. This link says it's in stock Powercore Fusion 10000: amzn.to/3wy5zfZ Also, Powercore 5000 : amzn.to/3JArR4y Hope this helps and thanks for watching!

[@super_slo]

Was this video filmed on the zv1? Good info, thanks!

[@TechTravelBeyond]

I’ve filmed a good majority of my videos with the ZV1. It’s great! Thanks for watching!

[@victoriablacer]

Thanks for the video! One quick question though, do you know if connecting the dummy battery to a power strip would be enough to stream for 6+ hours without the camera powering off? If so, should the option "USB Power Supply" be turned on or off? Thank you in advance :)

[@TechTravelBeyond]

Hi Victoria! You can stream for as long as you want as long as the camera is NOT recording. I use the setup in a previous video with the HDMI out of the camera as the output for video not USB (it's lower resolution via USB--See the camera manual) so I don't have the USB Power Supply toggled to On since I'm using the dummy battery. Thanks for watching!

[@majorpowerracing9046]

How can i live stream a event with my Sony zv1? instead of only using it as a webcam. What software will i need ? What other supporting devices/things i will need ? i have a Macbook Air with the M1 chip if that helps on the understanding of the equipment i have . I want to live stream outside of the house basically . Thanks

[@TechTravelBeyond]

Hi! This set up is for stationary livestreaming with a broadband connection and your computer with the ZV1. If you can have all 3 and a continuous power source on the go, it will work (ie, in a sports booth, etc.) If you're a mobile user, an iPhone will work well because you can use streaming services via OBS, your phone, and you can hook it up to a mic, external battery. Depending on your phone, you can film in 4k and stream in 4k if you have the bandwidth. I don't stream on the go, so perhaps you might speak to others in your sport who do. Thanks for watching!

[@jasonsong6747]

Side question - does this external dummy batter help with overheating issues?

[@TechTravelBeyond]

You shouldn't have any problem with overheating while livestreaming with this setup. The only time you will have an overheating issue is with continuous recording within the camera. Once you press the record button, you're processing and sending video and audio data to the memory card, and this creates heat. When livestreaming, you're only sending the video feed out to your computer. I was on a stream for over an hour with the Zv1 .Check out this video at 4:26, to find out how to turn off overheat warnings: kzbin.info/www/bejne/jXbKiGSXhMqdm7c. Thanks for watching!

[@jasonsong6747]

@@TechTravelBeyond Thanks for your detailed answer this makes sense. For some reason no one gives this distinction on the Sony ZV1 overheating videos and as a noob I didn't know to ask the question in a certain way (ie. streaming vs recording) because to me on the surface it's the same thing. But now that I think about it it makes total sense lol (duh!). Yea, I got the dummy battery and for 4k recording, I got the exact same results - ie. overheating around 30 min mark. Thanks for your response anyway it solidifies my understanding. I went ahead and get a 60mm USB CPU fan and have mounted it at the back of the camera (rubber band - hey it works tho). Today I will go out to try this mod as I heard good results from doing this in terms of keeping the temps down. Hopefully it works well.

[@diannedumpit7033]

Can I use a 4.2V dummy battery for my ZV1? Do you think it won't fry my camera? Thank you.

[@TechTravelBeyond]

The one I have listed in the links is 4.2 volts. Thanks for watching!

[@dougd59]

Can you tell me what is the brand of the external filter adapter ring that you show at the beginning, around the 6 second mark?

[@TechTravelBeyond]

It's the CAME-TV adapter: geni.us/9YiAwQ I used it in this video about hooking up a teleprompter to the Sony ZV-1 : kzbin.info/www/bejne/iZCpq3uqlpZ3jLM. Thanks for watching!

[@WOB1010]

Would it be ok, to run this straight from the wall charger? (Via the USB port)

[@TechTravelBeyond]

Yes, you can. Best setup is with the dummy battery, but if you use USB, just make sure your battery is full so the camera doesn't shut off and go into battery charging mode while your streaming.

[@anamosa1574]

Hi how do you film camera settings ?

[@TechTravelBeyond]

The old fashioned way. Filming the screen. (g)

[@jeffreylin4612]

Love the video. The ZV-1 and dummy battery worked for me a few weeks ago to stream for hours, however, today when I tried to turn my camera on, it lights up, the lens opens slightly and then the camera immediately shuts off. I switched back to the regular battery and the camera works fine, but the dummy battery solution no longer power ups the camera. Any ideas what I should try? Thanks in advance!

[@TechTravelBeyond]

Check your power source that you connect the dummy battery to. It should not output more than 5 volts, and some of the documentation for the dummy battery kit lists that. Try a different USB plug. Some of the newer USB plugs can output more than 5 volts causing the cameras circuits to not accept it. Hope this helps, Jeffrey!

[@jeffreylin4612]

@@TechTravelBeyond This fixed it, thank you. I happened to try two different USB plugs that were 5V and both didn't work, so I started troubleshooting other aspects. But, a 3rd plug worked and I just happened to have two bad ones. Thank you!

[@kwacz]

It is possible that the usb power supply you were using did not output enough current. Voltage is just as important as current, although voltage must be correct and no higher while current can and probably should be higher than you need. The device will only draw the current it needs and the current rating on the power supply is its maximum it is capable of outputting.

[@alexjimenez7396]

@@jeffreylin4612 Hey man running into the same issue as you! Quick question - What is the name of the 3rd plug that you used that worked? Also is this method still working and holding up for you now? I heard this method of using a dummy battery might fry my camera, how is it holding up for you?

[@stegibson]

Hi Chuck, thanks for the videos. I'm using the ZV-1 as a webcam using the HDMI video capture device and everything is Ok. When I plug in the USB power supply to charge it while using it as a web cam I get the USB storage device screen and lose the HDMI feed. Do I still need to enable USB streaming even though I'm using HDMI capture to be able to charge it. Thanks

[@TechTravelBeyond]

Hi Stephen. First, make sure your battery is fully charged so the USB cable doesn't have to do a charge cycle to the battery and provides direct power to the camera. If the battery isn't fully charged, it will use the remaining battery power, power off and make the camera charge the battery first before streaming. For settings, in the Toolbox/Settings tab, Page 3. Follow this: USB Connection: Auto USB LUN: MULTI USB Power Supply: ON. You do not need to enable USB streaming since the feed is coming from the camera via HDMI to the HDMI capture card. Hope this helps! The dummy battery in this video bypasses USB power, and makes the camera think it is using a full battery. I use this setup for studio filming of my videos!

[@stegibson]

@@TechTravelBeyond Thanks Chuck, I've got my dummy battery on order. I'd managed to suss out the settings like you suggested on Toolbox page 3, I tinkered around with USB streaming but I think the problem is, as you suggested, the battery is not fully charged. Thanks again for all your help

[@guidingstars9840]

I am a new subscriber. A question for u. Can you record a video until the powerbank runs out of energy ? for example with a 20000 mah. at least 3 hs? thanks U in advance!!!! ( setting including batery sony and power bank 20000 mah,without dummy ), I need to do a walking at least 3 hours without change battery

[@TechTravelBeyond]

You can record a video until the powerbank runs out of energy. But, here's an issue: when you run out of power, the camera will shut down, but it doesn't guarantee the file will close/save properly to your SD card. Time what you are filming according to what you need, and ensure you have enough power. You may have to calculate based upon the resolution and how you are filming (4k, 1080, etc). Also stabilization and other factors come into play so your power needs may vary. Thanks for watching!

[@videobyredjade]

Thank you

[@TechTravelBeyond]

Thanks for watching!

[@jj-yf7pi]

Have a question regarding the mag filter and a 52mm variable nd filter. If it shows the filter in the corners with stabilization off in 1080? And if it shows when in 3:2 photo mode? Hope you can answer my 2 questions. Thank you

[@TechTravelBeyond]

Hi! The latest version of the Magfilter adapter is lower in length than the older one I used in the Ulanzi WL1 video. If you’re just using it for ND filters only and no wide angle lens, you won’t have the vignetting problem even at 1080. That’s been my experience on both the ZV1 and Rx100. Variable NDs are what I use for most outdoor videos except with the wide angle lenses. I don’t know in 3.2 photo mode because I haven’t tried that.

[@jj-yf7pi]

Is the latest magfilter version the one you have linked on your zomei wide lens video? And i hope you could try out the magfilter with vnd filter in 3:2 photo mode. Hoping there will be vignetting in that mode also

[@TechTravelBeyond]

I’ll have to try that later this week when I’m not flying. Currently away from home and don’t have the ZV1 with me. Thanks for watching and your comment.

[@jj-yf7pi]

@@TechTravelBeyond thanks! So is the magfilter linked in your zomei wide lens video the latest version? Cause i’ll use your link to buy it if its the new version

[@TechTravelBeyond]

@@jj-yf7pi Yes, it is! I bought it because I wanted one for the ZV1 too!

[@rollinnontwo276]

Great Video

[@TechTravelBeyond]

Thanks for watching! 👍

[@AprilBaniqued]

So helpful!!

[@TechTravelBeyond]

Glad this helped!

[@Ryvaeus]

When I use a dummy battery, the camera still auto shuts off after 30 mins. Does yours do the same, and if so, would it be safe to use both the dummy battery as well as the USB power option at the same time? Because it seems like the camera will stay on indefinitely if it detects power over USB.

[@TechTravelBeyond]

Go to 4:26 in this video: kzbin.info/www/bejne/jXbKiGSXhMqdm7c Follow the directions to override the overheat settings which cause the camera to shoot no longer than 30 minutes due to the overheat protection. Thanks for watching!

[@igorrtkd]

Hey, I've tried that but the camera overheats at about 5 minutes, what could be the issue?

[@TechTravelBeyond]

This is from my other video about live-streaming with the ZV1. Watch at 4minutes 30secs. Set the Auto Temp Off setting to High. kzbin.info/www/bejne/jXbKiGSXhMqdm7cm30s

[@nerdagenda]

Will this work for the Sony RX100 IV or VII? ( I have both)

[@TechTravelBeyond]

I have the VII and it mostly works just like the ZV1! The ZV1 came out right after the VII and you can use the same menu options and micro HDMI for output to the video card! It also uses the same battery, so the dummy battery is the same. Just get the right base so you can just leave the battery door open so the cable can connect to the external power.

[@nerdagenda]

@@TechTravelBeyond thanks for the reply!

[@PrzemekM25]

By mine that's doesent work, i have not a power supply icon. Camera says me that I must check connected device.

[@TechTravelBeyond]

Are you using the dummy battery I have in the video description?

[@friotv1295]

Thanks when i read that there was no way you could charge and rcord at the same time it was almost a deal breaker until i saw this

[@TechTravelBeyond]

Glad this helped! 👍

[@PureChaos]

Every time I try to connect USB power to my ZV-1 it just gives instructions to turn on USB Webcam and will not let me just use power from a power bank or wall adapter. It only works when connected to a computer and capture card or USB Webcam feature.

[@TechTravelBeyond]

The capture card is the best way to connect your camera. When you use USB for video, it's at a lower resolution. See the camera manual...it's not even HD via USB. If you want to connect power, use the dummy battery for your camera, and you'll not have any issues.

[@AclateValorant]

The camera died while the USB Power Supply setting was off, what should I do?

[@TechTravelBeyond]

Use the Dummy Battery I show in this video.

[@lonelydiscordboy]

Thanks buddy

[@TechTravelBeyond]

You’re welcome, and thanks for watching! 👍

[@FonkaZoid]

so you have 2 options for continuous power? option 1, USB chord & setting to USB power on option 2 dummy battery? and both option can go to either mains power or an external big battery?

[@TechTravelBeyond]

Yes! I outline some great options with the ZV-1, and for more information, always refer to the User Manual for best specs too: www.sony.com/electronics/support/compact-cameras-zv-series/zv-1/manuals Thank for watching!

[@erikshirkey]

Hey man. I have plugged my sony Zv1 into the USB on computer while on zoom, and it still dies.

[@TechTravelBeyond]

Have you tried using the dummy battery in this video? Also if your doing zoom over usb, your computer may not be able to provide enough power to the ZV1. In this video I used the USB to provide power to the ZV1, and used the micro HDMI and capture card for the video signal. It’s true HD that way whereas via usb it’s not at 1080x720p.

[@erikshirkey]

@@TechTravelBeyond thanks the the reply. Even if I have the usb to the wall it still doesn’t stay powered. Strange. I guess only way is with a dummy battery. I will also try the hdmi instead. Thanks for the help!!

[@omsmada]

usb power is already on by default and it's off in like 10 minutes...

[@TechTravelBeyond]

What is your power source? If you use the dummy battery, it will work.

[@screenprintermike]

Dummy battery: I am afraid of how to power the it properly

[@TechTravelBeyond]

Don't use any adapter which outputs more than 5 volts. The included instructions for the dummy battery emphasizes this in red.

[@byMayvlog]

This was very helpful, thank you 😊

[@TechTravelBeyond]

Thanks for watching, May! 👍