SOOTY rebuild update! The BIG BREAKAGE that stopped the show - Shauno's full DIY driveline rebuild

Shauno & Jesse are finally making real progress on Sooty MKII! In part 3 of Shaun Whale's 80 series Landcruiser rebuild/restoration, the boys tackle some of the hardest jobs so far:
- Removing & rebuilding wheel hubs, wheel bearings & brakes
- Removing & re-installing diff centres, axles & housings
- Replacing all of the shocks, springs & suspension bushes
- Making sure NO nut & bolt goes untouched!
- Slowly but surely, this true ground up 80 Series 4x4 build is coming together!
Get the latest and greatest deals on 4WD gear and Snatch merch at www.4WD247.com
To find out what oil is best for your rig go to: rego2oil.castrol.com/en_au/au...|
#4wd247 #landcruiser #4x4 #80series #offroad #restoration

[@rwdnissanr33]

Shaunos shed is so strange 😂 has a hoist but no compressed air, has impact drivers but no vice just blocks of wood. I love it mate 😂 cool episode I like these sort of episodes very educating

[@richardslater2580]

He spends all his money on Sooty parts 😄

[@WTFvideosstiffy]

He's got his priorities 🤣

[@dudleythree3]

Toyota man needs a hoist before air in the tyres 🤣

[@cameronmeng3071]

I would trade my vise and air compresser for a lift in my garage, wouldn't make that trade lol

[@leonkane8240]

I was thinking exactly the same thing. I have a vice & compressor but no hoist :0)

[@rindiem]

Watching from Mozambique, am a fan, as well as my 5yr old son. He calls your show "Umbogari" Learning a lot from you guys. i love working on the cars too. thanks for showing the mistakes too, its important

[@Darndiddlyarn]

For wire brushing nooks and crannies I make a wire brush from old wire rope, splay the end a bit and chuck it in the drill, gets down into corners, even goes around corners.

[@oldboyoverland]

Thats a cracking tip... thanks.

[@chir0pter]

also rust remover spray? Didn't see that mentioned

[@shaunandsqueak]

That IS a real good tip!! thanks for that!

[@pullingguard1527]

First to say bring on the Jocko Solo, authentic jocko with no scripts. Just the bloke in his element

[@dolguldur4706]

Nope...i prefer mature host..not young boi

[@kirkwoolston6932]

'Authentic' and 4wd247 don't really go together anymore unfortunately.

[@dolguldur4706]

If you want to see jocko travel solo..then tell jocko to open his own channel like graham did for solo travel video

[@thomasdarren6434]

Disrespected nose style 👌

[@atheosxgaming]

Strong STRONG emphasis on NO SCRIPTS. The adventures are fantastic. But skipping through 90% of the talking on camera is a go to move here.

[@ImHarro85]

Can't wait to see sooty 2.0 showing the dmax how its done. Loving the build episodes but keen as to see it in action

[@smallaam6191]

Honestly Shaun’s, I respect you so much more as you know when to let experts do things, with engines, wiring and diffs, but are willing to do a fair bit and learn. Better than pretty much every other person

[@LoneStarOverland]

Reduction gears in the t-case are the bomb!! I love mine!!!

[@mossiemomma]

My fiance and I 💘your 4wheeling videos & love trying your recipies!

[@fatmanoverlanding]

For someone like me who's an 80 Series owner and loves 'em, getting a chance to rebuild one is what dreams are made off.👍

[@smchaffie22]

Hey guy's big heya from NZ. Wife and I love all your shows, we have a Swb 89 70 and a Mwb 87 70 setup for adventure and just want to say your personal content is awesome and is really nice to see you doing the hard yards that we all go through that sometimes feels is missed in your 24/7 shows but is is just part of the trip. I feel videos like this just help others feel your in the same place between trips! (Even if you sometimes get extra help) cheers keep up the good work

[@gonefishing1453]

The old Landcruisers and Nissan's would have to be the best boys toys, so easy to work on and fix yourself without any fancy tools, loving the rebuild and can't wait to see it on the Cape York tracks. 👍

[@andystewart7654]

Hey Shauno, would love to see inside the diff & how the TJM locker functions please 🙏 Great video 👊👏👏

[@keithk8698]

I’m sure it’s gonna be a BEAST and I can’t wait to see it in action! When you work on your own project it gives you great satisfaction of what you accomplished. When I built my buggy from the ground up I was so amazed at what I’ve done. Because I’ve never built any car before.

[@alexanderdiaz6022]

Good vibes my friend, Alexander Diaz from the Dominican Republic I write to you, I am Venezuelan I have been in this country for 8 years, brother I admire that passion you have for 4x4, and I share it with you, those adventures you do are spectacular, in my Venezuela too 4x4 is practiced very well, I dream of going to your country and doing one of those adventures in the open air, you are hard at what you do, regards

[@literallyanythingelseother]

I just want to point out that the engine, trans case and body were literally cracked or broken in some major way. Absolutely mental that soot lasted like that

[@andrewheadland9341]

I’m jealous the weather down here in the blue mountains NSW has been crap, I’m been trying to work on my troopy for the last 8 mths, I’m struggling with juggling work, home duties, sick parents to find time to work on my troopy body work to get it driving after 5 years. Mechanical is done which is a relief.

[@troyfrith526]

Doing the same with mine along side you. Was waiting for next video, ironic as I’m doing my front end, brakes and rear brakes at the moment as well. Love to show you some photo’s.

[@tinajensen3450]

New suddy is brilliant looking car, and will do old suddy praud. 👍👌. Greatings from denmark 🇩🇰

[@_Bruggs]

Nice to see how working on your car in your own shed is actually like. Dirty and tools everywhere, all that was missing was empty beer bottles. Love it

[@gokub1975]

I've always presumed they're heavily away from camera. Those boys aint working for free on their time off and i've noticed they get jollier as the day progresses in the past videos.

[@john_ridesbikes]

Red Rubber Grease on literally everything, and the seals literally slide in like a glove! Same with interference fit bearing races, lube her up and in they go! You guys not got yourselves a cheap 10tonne floor press? Made building my diffs up with lockers and installing my reduction gears a bloody work of art! Saved the busted knuckled and need for last minute trips to A&E and busted bearing races! 🤣💪🏼💪🏼

[@jaydenharland451]

Love the build mate I think you graham Jocko and Jessie should do a Budget bulid comp for charity

[@anthonypaddon2865]

Love my 80, love watching you rebuild yours

[@anthonythompson4840]

So glad you stayed with the 80. Raw, no nonsense 4wd that most can relate to. Great vid showing the rebuild. Love the honesty when mistakes happen. I can relate

[@benradcliffe2717]

*If in doubt sooty out* 😁😍💯

[@zoetheplumber3068]

love watching your car build videos!!

[@miahmiot]

Sooty Mark II looking super ready for the tracks Shano !!🥳

[@radojamie]

Sooty is looking awesome really enjoying watching it come together

[@Themightygq]

I can't wait to see the old girl running again I've been a fan of soot since I was a little kid and now I'm 17 it's going to be insane can't wait to hit the tracks myself.

[@yamahafan7330]

When tightening wheel bearings, you should tighten them more than necessary to seat them, then back them off. Otherwise they will loosen up down the road. Looking forward to seeing this done. Nice work Shauno.

[@jakeboffey6238]

Yeah they need to be preloaded to 2.6-5.6kg

[@chrisforgan731]

yes pretty much all wheel bearings are the same tighten till locked to seat em proper then back off to the preload.

[@yamahafan7330]

@@chrisforgan731, yes unless they're the press fit type.

[@Ohmy1956]

I appreciate the videos, they are becoming my go-to for evening entertainment. Keep up the great work

[@jasonatkins9134]

Looks good mate can't wait to see it wheeling 👍

[@stephendann]

"It's only dodgy when it doesn't work" that's t-shirt worthy

[@keithlea6804]

I did this to my Cherokee 3 years ago. Best investment ever. Even did complete break system. Its nice have a few years no trouble no worries. Wish i could have Dana 60s in it. But i don't wheel like i did before my back gave out. Live for snow wheeling. Nice build bye the way.

[@errolfeistl1705]

Shauno - I mean this constructively... Its worth downloading and reading the manual. at 19:25 when you install the front locking nut, the process involves tightening the nut, turning it several times, backing the nut off and retightening. Torque figures are pretty important even if you've rebuilt the hubs a bunch of times.

[@R.Sole88109]

That's the way I was taught to torque things including wheel nuts. Not 30 ugga-duggas with a nutsmacker then a instant click with the torque wrench.

[@AminaAmina-xq4bb]

Dude, this is Shauno we're dealing with here... most of his builds are held together by chewing gum and faith 🤣

[@heathballard5398]

Looks amazing can't wait to see it all together and out on the tracks.

[@dougmcarthur3026]

Looks amazing mate. I’m a Nissan guy through and through but have a soft spot for sooty and sooty mark 2 is a beast. Keep up the great work mate 👍. I hope to see you and the guys out on the tracks one day so I can meet you all and see the rigs in action live 🙏. Cheers Doug 🍺

[@michaelreis5398]

It's looking great Shauno , looking forward to seeing her out on the tracks!

[@foihdzas]

Drooooool… twin locked with reduction T case.. in an 80… dream build Shaun

[@mathewmay5361]

Great job. Love watching and following this build. Can't wait to see the end results on the tracks!

Parabéns Shauno!!! Estamos Acompanhado o progresso aqui do Brasil !!! Abraço

[@suttoo85]

loving this series man, cant wait to see it running

[@rexnou7601]

I always love watching this crazy 4x4 boys.

[@ezekielnand1003]

Guys awesome job. Just love watching you guys off road.

[@sethdaniels7166]

Loving the build and ol Soot's is looking tough! Can't wait to see her run!

[@benroberts9915]

Love it mate, fantastic build so far. Dont forget to straighten that bonnet up too . Aweseome to see Jesse on the team now.

[@dannyobrien8298]

loved watching Shauno just working away with Jesse in the shed. With all respect a whole lot better than the boys walking into someone else's flash shop full of 79's and 200's! Keep it up, keen to see sooty 2.0!

[@ravindeena2048]

Sooty 2.0 gna be an absolute weapon and will make the previous sooty proud!!! Cheers to you mate! Awsome rebuild.. cant wait to see her in action!

[@RN46Lux]

Love seeing these videos about sooty mk2

[@bensanders5453]

Awesome Shauno I can’t wait to see it on the tracks

[@Blanchy1977]

Been waiting so long to see the next episode of the sooty mach2 build!! What an absolute rig!!! Can’t wait til you have it up and running and take it on its first trip!! Good to see Jesse working on it too 😔👍🏾

[@andrewt3952]

Great build series mate. Good to see an actual build, instead of blokes sayin “we” gonna fix this n “we” gonna mod this, as they drop it off to a workshop. I’m currently doin a 75 cab to 80 chassis swap. I understand all ur emotions during the process, 🤣🤣. Definitely worth the ride! Good stuff mate👍

[@robertmckenzie1194]

Sooties coming along great looks good nothing better then doing most of the work and seeing it come togeter

[@chir0pter]

love this kind of video, even tho i dont have an 80 you do learn about all the parts & components that go into making a robust 4wd & also seeing what considerations to take to do a job right. Partly why i like the M5E39 channel, gives you the confidence to dive into a job yourself

[@jakebaker1912]

Good effort boys coming along nicely 👌 keen to see next video 👍

[@saint088]

Love the build videos! Keep them coming

[@lachlanmarshall2820]

It’s all coming together and it looks epic 👌

[@truetierra]

loves these backyard build vids 👍👍 nice one gents!

[@michaelahr1]

Love it, keep doing what you do!

[@SirShorty1982]

Great vid, can't wait to see sooty going again

[@7_camric504]

Fantastic build series will be wicked when it’s done 👍🏽. Love the builds.

[@marcielynn4886]

Kept my 92 stock. It still takes me anywhere I need to go.

[@jeremyharris4415]

It’s looking fantastic Shaun can not wait to see him up and running again

[@alisonphilp7497]

Looks epic can’t wait to see sooty max 2 on the tracks 👍🇦🇺

[@andytaig43]

Looking Mint👍👍👍. Can’t Wait to see it at the end. Very inspired to do a build after this build series👍👍👍👍

[@jameswormald7312]

Awesome work Shauno, i have to say its really coming together !!

[@high_lyfe8546]

Looking tough Sooty 2.0 💪 I can’t wait for the next video

[@tonga741]

Great to see you are getting sooty closer can not what till i see you wheeling on its first trip...

[@fish_fingerz_tv]

Yes! Looking sick!!

[@matk4731]

Very cool. Thanks for sharing 👍🏻👍🏻🙃🙃

[@MrAVROARROW509]

Good to see the diy rebuild.

[@Lee-astrololee]

Talk about learning lessons in patience, frustrations and skills, at the end of the day when it all comes together, there will be satisfaction for a job well done! Onya Shauno & Jesse, great teamwork!

[@nathansingle9698]

Loving the build! Gives me motivation to do my front diff rebuild on the 4runner now!

[@lamarzimmermanmennonitefar5269]

Same here. Blew mine out in a snowbank in my driveway 🤑

[@edwardsutherland5409]

Love soot rebuild can't wait for more videos of hope you do more rebuilds

[@robheathcote8561]

looking good shauno, ole soot has come a long way.

[@georgedamouras3454]

Hi mate love every bit of what you and all the boys at 24/7 4x4 are doing with the Chanel keep up the awesome videos and builds

[@chrissperandio13]

Sooty 2 is looking sweet. Look forward to seeing it running

[@OffRoadQC]

I miss Sooty MK I and can't wait first the 1st time Mk II hits the trails... soon I hope! That build is pure dope! Cheers from Canada!

[@MrToppox]

😈😈😈unbelievable, office boy part time 4x4 mechanic now pulling anything apart and refining it to better then new ! Amazing 😈😈😈

[@uthpalakinivita9111]

Awesome progress and nice build Shauno

[@pluckaambo3888]

Loving the new car can't wait to see it on the tracks doing an awesome job can't wait for the next part of this build

[@kippen64]

So impressed with Sooty II.

[@peterdingley5321]

love to see these kind of build videos. keep it up shauno

[@bradleyrankin9002]

Bout time been looking forward to all of these vids

[@jinxcvercko4152]

Sooty mk2 looks absolutely amazing I'm green with envy!

[@conservativesniperhunter7439]

Sooty II is looking real good . It’s going to be a weapon on the tracks .

[@rjl110919581]

thank you sharing the video

[@Graeme_H]

can't wait to see the new/old beast back on the on the road or track

[@dar9752]

Hi there. The construction video is very good and instructive, you can learn a lot from it and learn the little tricks. Nice work and I look forward to the next video from you!

[@major.5817]

Great job 👍, i cant wait see Sooty mkll on tracks

[@benjaminvalderrama3907]

Bloody fantastic! Love the build makes me super keen to do one and I know next to nothing about building cars hahaha

[@barryhennessy6683]

Love watching your work. And your driving adventure. Keep up your work i LOVE IT

[@seqhs2072]

Such a epic build can’t wait for the next video 🤙🏻🤙🏻

[@Magnuslovstad1992]

This is my favorite videos besides the big trips, please do more of these shed videoes on Daryl And Grampa 80Series.

[@Adhdroamer]

Can't wait to see Sooty finished. Its been a great journey. I know the suspension needs to settle but it looks like ol shauno has possibly raised the hight again.

[@mrbally8129]

Looking scrumptious love it

[@jofi7581]

Can't wait to see sooty back in action 👍

[@dolguldur4706]

Sorry to dissapoint you..you need to wait until next year for shauno to finish his sooty build 😆

[@wanrapsyndor4095]

Keep em coming...lovin it...

[@heftymerv]

lucky you had Jesse there.... wrangle in those cowboys aka "Shauno" on this build.. great work mate, look pretty awesome now..Nothing better than a 80 with all new parts..

[@vellovenkateeshkk8670]

Yes! we loved and we were waiting for you to take her out for a spin but ok we will wait for it.

[@DuckDude]

Love the build vids, i rekon need some more