Sorta Sortimo Small Parts Rack & Sorting Station

[@nekocal]

I cannot thank you enough for including your mistakes. You will positively affect my mood and actions the next time I screw up. Which should be any minute now. Seriously, thank you.

[@3693G]

Wesley is the ThisOldTony of wood. Absolutely tremendous.

[@levisoriano1]

I personally love your sense of humor

[@Techsus1]

Things guaranteed to make me smile...the first slice of a brisket, my dog, and a new Wesley Treat upload.

[@Lorddanielrushton371]

I love your sense of humor. I always get a laugh from your videos. I'm glad to see a pro put the drawer slides on backward. Makes feel less like an idiot.

[@abelincoln95]

Dang! I gotta have one of those "Spacely" table saws!!!

[@AndyvanderRaadt1]

I think they sell an upgrade Widget.

[@stevenemert837]

I wondered when the Jetsons car sound came into play.

[@billcunningham8485]

Absolutely love the Jetson table saw sound. George Jetson wasn't much of a woodworker - her was too concerned to hurt his button pressing finger. Subscribed .

[@cognitor900]

Now that’s a functional design that addresses all those design considerations like: 1) where to put container 2) where to leave container now that you’ve taken out a “section” 3) how to close container now that you’re holding a section (and drill and washers and pencil....) and 4) how to annoy at every opportunity some doofus complaining about noise they are choosing to receive on their very own device rather than reading manual which probably indicates where volume switches are....!!! Ha, wet myself laughing every time!! Seriously good editing and a seriously good mistake that we’ve all sort of made. Thanks very much for all that work and for seriously thinking thru the limitations of working with these great containers...

[@killersugar6816]

Thumbs up for the OCD wire scrap collection. Glad I’m not the only one.

[@rickharms1]

Thank you for showing your mistakes. It helps.

[@jim571a]

The only thing I don't like about you vids, are the people that try to tell you what's wrong with them. I love the content, and the humor, and also how you screw up once in a while to make us feel better. I'm sure this is difficult for you to do. I love the little tricks I see and don't feel bad at all about stealing them and making them part of my tool bag. Thank you!

[@JakeLimon]

Professor Farnsworth would be proud of your wire drawer. I, however, can just say: "Whoa!"

[@jaywood8296]

A very well done and well filmed version of a not-great concept. To even find out if you have the right box requires taking it out, finding a place to put it, or in this case, pulling out the tray, and putting the case down and opening the lid, praying that it never gets knocked over. Then you still need overflow storage for larger quantities of common items. If they were drawers, it would be one step- open drawer, select item.

[@WesleyTreat]

I label them. That's how I know which one to grab. And drawers aren't really conducive to transporting to different jobs. If this solution doesn't work for you, that doesn't mean it's universally bad. Not everything is designed specifically for you.

[@jaywood8296]

@@WesleyTreat Not universally bad, just not optimal, IMO. It would be interesting to see it in use after four years- still happy with the set up? Again- great job on the video.

[@WesleyTreat]

@@jaywood8296 Yes, thank you, I'm very happy with it. I think what you mean to say is it's not optimal for the way you work. No solution is optimal for everyone, but may be perfect for many others. Thanks! 👍

[@norsegodofcode]

Man, the upgraded sound of your saw has me in stitches.

[@wesleycassford]

Woah! The beginning of the table saw bit! Amazing!!

[@SarahHafley]

I love the Jetson's saw noise. :)

[@jewdd1989]

Love the sarcasm, really enjoyed this sartimo organization build video! Wish you had more woodworking and shop projects like this! More pls

[@markgilder9990]

I’ve learnt something today. Pay attention to the direction of drawer slides.

[@onepanther69]

Thanks for including the screw up... I do stuff like that all the time... makes me feel better, I'm not the only person who does that....assorted lengths of wiiiire..lol

[@drewdane40]

KZbin suggested one of your videos to me today, and I'm about 4 videos in and subscribed. Your channel is a little Jimmy Diresta, a little This Old Tony, and a lot original. I dig it.

[@inactive67]

I feel ya on the backwards hinges.....been similar places myself a lot.

[@theodoreross36]

Man I’ve seen several of these builds this on is by far the best. 👍

[@daveayerstdavies]

Love the Jetsons table saw.

[@donovangregg5]

Best table saw sound EVER!!!

[@skuzzn815]

That thing is beatiful and the temporary board is a great idea

[@bigpop762]

That table saw sounds absolutely riveting!

[@darrelduke]

those are my go to parts cases.

[@thanemakes5377]

Rewatching…. 2:12 it all starts here! Love this still

[@briancarter1597]

A place for everything, and everything in its place.

[@TheSandstorm434]

Man, the quality of your videos/content is through the roof!

[@jedidiahwilliamson6147]

I think new table saw sound effect is superb.

[@garagemonkeysan]

Wow. Great project. Attention to detail is incredible. You make it look so easy. I saw the same "improvement" needed in the Savage video but instead of a tray, I only installed drawers in mine. Your tray solution is way more elegant and useful. There are many of these "Sortimo" videos on YT but your design is the best. Bravo! : )

[@TomGlander]

People complain about your table saw sound, so you make it sound totally weird... I love it.

[@Vickwick58]

I took your advice and rewound it three times. Frankly, I'm shocked and dismayed that a professional of your caliber would make the same exact mistake three times.

[@NedbLegocity]

ha! classic!

[@mperdue12]

That's consistency.

[@jimmyvandenbroeck3547]

Well built and very well thought out and practical

[@rickpye2465]

I loved your solution to the saw squeal issue!......lol And the project is great too.

[@DaveVanWest]

Have a similar rack, mine is not as tall nor as nice. I installed it on the wall with French cleats, you will be amazed at how much you can get in organizers. Just a small tip when using the label maker to label ( I did mine on the yellow part of the handle), 2000 grit sandpaper and a wipe with isopropyl alcohol will make sure your labels are not "self-removing."

[@NASTYcraftX]

Your dedication to piss off that commenter is spectacular. Great video.

[@chrisjohnson4386]

It sure makes you miss the real sound of that saw.

[@hawkie333]

Jetsons!

[@workhardism]

@@hawkie333 Thank You! Jetsons. I was racking my brain trying to remember which show that sound was from. LoL.

[@joonasfi]

Now I'm tempted to say that "your drills also sound annoying - why don't you do something about it?", and see what he comes up with :D That table saw comical beeping was golden! :D

[@bthivierge]

I've never laughed so hard at a table saw before...

[@drmkiwi]

Neat project. Especially like the tray for access to the contents of the storage boxes. Thanks. Cheers, David.

[@The1badxj]

LOL the Jetson's cyber drive table saw is genius, This is the best rack i have seen for these sorting bins. BTW at least you didn't glue the back on and find out about the backward slide a day later, after the glue dried.

[@evreet2000]

I love the table saw sound effect, it sounds like the Jetsons' flying car.

[@dekebell3307]

"Marie Kondo of Fasteners"!!!! Your sense of humor is on point! Though I just found your channel, it's definitely in my top three favorites. Content, quality, craftsmanship...you've got it all nailed!

[@waynewilson5287]

Just found you video here for first time. Love your sense of humor along with a quality video presentation. Keep up the good work! Thanks for sharing.

[@markadamarnold]

Awesome build. Thanks for showing your mistakes...we all do it. And I love your table saw noises...keep those for sure!

[@northshorepx]

Mate that was a joy to behold. Great comedy too.

[@ElCidPhysics90]

"Type A accessories"! Love it.

[@zeroforkgiven]

Man. This guy has it down. Yes, skill in the workshop, but also just the right blend of camera presence, editing and humor. Subbed.

[@wombora]

PLEASE FROM NOW ON JETSON SOUNDTRACK EVERYTHING!!! Tablesaw noises, drilling noises, putting in screws, EVERYTHING!!!!

[@ianvicedomini2648]

Now that is just the kind of arrangement I need but without the wheels... very nice build mate.

[@deeranfoxworthy6069]

I love your Futurama references

[@rayhindle642]

Just love this mans sense of humour, liked and subscribed......... Ray H ( From England U.K.)

[@drnicholaspratt]

How have I missed your page for the last many years. Such a great find.

[@1D10CRACY]

I wish my table saw sounded like a Jetson car!!!

[@taxi317]

Awesome storage unit... totally jelly.

[@kg4gav]

Sorta-mo. Love it.

[@heckmancs]

Awesome build. Love the jetson flying car sound for the saw. Bravo.

[@aaronzimpel4995]

Those long clamps are awesome!

[@scruffysanta8442]

Fust time I found one of your videos. Very well done and you get a thumbs up for the Jetsons Sound effects and the great video!

[@blewey]

Every time I hear the new more soothing table saw sound i lol

[@kenl5217]

Looks like it brings you joy

[@NormReitzel]

It happens. I've had to disassemble whole projects under similar circumstances. At least you didn't use OSB and Biscuits and Glue to assemble it!

[@ThereIsOnly1ArcNinja]

Darn - a little late to the game, but I have to say, I LOVE the "Forbidden Planet" vibes of that table saw!

[@yesjohnny01]

I love the 'Jetson Table Saw' !

[@frijoli9579]

The screeching isn't the issue, leveling the volume is. I love the machine noises but not when I have to keep adjusting the volume controls. Keep up the great videos!

[@WesleyTreat]

I adjust the levels so they sound good on my end. Nothing more I can do.

[@mikeleenelson]

Love this. The table saw sound replacement to the ufo is sick.

[@grandolddrummer]

Assorted lengths of wire just earned a sub from me.

[@btj1844]

I'm with Marcel, please rethink your other tools! Sweet!

[@ericbaier]

A+ for the saw sound. But another idea to hold the parts bids is to find an old rolling bakers rack. They are a lot less work to convert them to a storage system.

[@genoburkhard6394]

Thumbs up for George Jetson sounds!!

[@McFlysGarage]

I use these cases and have been 3D printing different sizes that weren’t offered or extra if the sizes I need

[@donfillenworth1721]

Best design I have seen. Thanks for sharing.

[@junglejammer1]

Love the George Jetson table saw!

[@HardwareUnknown]

Hands down the most thought-out and versatile implementation of a DIY Sorta Sortimo/Econo Sortimo rack I've seen. Just watched Adam Savage's video, and like many others knew I wanted to try out the organizers for storing small parts. I'm going to start off with only 1 or 2 organizers and see how I like them. If they work well for me and I need to upgrade to a rack, I'll be basing mine off of yours. The ability to mix and match the shallow and deep organizers is great, and the temporary table and drawers for "Type-A Accesories" really take this to the next level for me. Loved the Futurama reference. Keep up the great work!

[@shimmeringtrashpile]

whoaaaaaa.... SO great. I 😍love 😻 the temporary placement tray! Right now I balance my stanley organizers on my knee and then every 4 months one tips over off my knee and I lose my mind. 🤯

[@mikesheets4332]

Love the table saw sound lol

[@Bob_H]

LOL - Various lengths of wire, and a spaceship you are a Futuristic guy.

[@KH6WZ]

Excellent alternative to Sortimo Wesley! Thanks for making this video for us!

[@steveashworth6707]

One helluva good job!, you mastered it!.

[@neilf4128]

Who needs Kreg's jig when you got Wesley's Space Jig. 😎

[@patricktdonovan]

Wesley this is the best home made sortimo cabinet I've seen on KZbin. It's been on my to do list for a long time but haven't conquered it yet. I've got like 15 of the harbor freight version of the sortimos sitting in my closet looking for a home. Awesome job.

[@antiskeptic]

That Jetsons sound should be a feature on ALL table saws!! lol

[@Simsy5861]

Love the new sound of your saw!

[@amyreaves8054]

Excellent! Thank you!

[@davidgranath5476]

The new saw sound is great - pondering the drill and other Jetson sounds you could come up with - LOL

[@zski03]

Marvelous Futurama reference Professor!

[@mickleblade]

loverly spacer jig, there's a lesson there

[@felixfromnebraska8648]

I always enjoy your videos, great information, and teaching. Even the Dumb......mistakes that we all make. If I ever get to making a video, you will see more bloopers and mistakes that I make than any quality video.

[@injoelsgarage3934]

Nicely done. Standing ovation!

[@cuttingedgecraftsman112]

love that track saw jig

[@tonyc7352]

I came for my sorting ODC and stayed for the table saw ASMR.

[@EricRoy85]

Thanks for sharing. Had some good laughs watching this one. Thanks for sharing your mistake, which, in my case, is often a part of the process. A very useful storage solution that I hope I'll be able to make, when I can afford the bins

[@eo151]

Adam Savage, Sortimo, entertaining construction, and "oh yeah?! Jetsons!"...subscribed. Well played sir, we'll played.

[@ptah956]

The next cabinet I build will also have a drawer for assorted lengths of wire. Thanks for the inspiration

[@NK-yl3yp]

Damn that table saw sounds much better!!! Thank You!

[@bobt471]

Love your new table saw sound! Terrific video thank you

[@JarrodCoombes]

I giggled every freaking time you powered up that table saw. Oh, and that middle slide out shelf is nothing short of genius.

[@RobinGingerich]

Yes! New Wesley!

[@nickcody7257]

A simple idea that may speed things up is to drill a hole a little smaller than your smallest yellow compartment in the full-length pullout shelf. Then you can dump the contents of a bin onto the surface, sort out the parts you want. When you are done, hold the bin under the hole and sweep all the remaining parts through the hole and into the bin. It would be quicker than picking up all the parts and putting them into a bin.

[@WesleyTreat]

Not a bad idea. I've already got one of these, though, which I'll probably hang on the side: www.rockler.com/easy-sorter-funnel-tray

[@nickcody7257]

@@WesleyTreat That is really cool. Just ordered two. Tho I will say it is more difficult to lose a hole.

[@TheMrChyrol]

You inspierd me to organize my lifelong collection of screws, nails, nuts, whashers and whatnot, AND MAAAAN IT FEELS AMAZING

[@gatekeeper65]

Nicely done. I would add a pair of tongs or tweezers hanging on the side of the cabinet for fishing bits out of those bins quickly. The Jetsons table saw sound edits are hilarious.

[@WesleyTreat]

I have plans to add some accessories. Maybe a tube for rulers, a slot for my binder with notes, and a square of sheet metal for magnetic trays.