I'm a Home Depot Flooring Specialist (misleading title, i know) and whenever I get a customer that's hell bent on installing their own floor (the majority being vinyl click lock) and ask me where the best place is to start, I write down the name of Joe's channel, hand it to them and say "right here". No idea how many times I've done that but it's been several times a week for more than 2 years. Definitely one of the best flooring tutors on KZbin...and a fellow Minnesotan. Keep up the great content. By the way, those spacers seem awesome, I wish they were in-stock at my store but I haven't seen them yet.
@sothatshowyoudothat Жыл бұрын
Thank you Gina, I appreciate you! I am up North in the Grand Rapids area.
@artkyger34256 ай бұрын
I bought Life Proof thick plank at Home Depot and did it myself. First time ever laying vinyl and it was a piece of cake. I had zero problems. It aint rocket surgery
@scottcampbell4116 Жыл бұрын
Scotty Campbell here. Wife and I have installed lock type vinyl from Home Depot in the entire house thanks to you and your instruction. This was over two years+ ago and we don't have any issues, and no transitions anywhere. Not too bad, as we are in are mid seventies. Thanks again!
@sothatshowyoudothat Жыл бұрын
Thanks for sharing that Scott! I bet your knees hurt.
@brendakeiner5791 Жыл бұрын
I’m almost done flooring my whole house using your tips. Really a challenge! I did most of it bending over-vs on my knees. Worked really well. I’m 67! And a lady!😁
@scottcampbell4116 Жыл бұрын
@@sothatshowyoudothat Joe you are so right about the knees but let's not forget about the back, right shoulder, right hand, and a multitude of muscles cramping up because of disuse. Wife & I are proud "flooring techs" now and the results are really amazing and it was well worth it. Thanks again for your KZbin effort!
@johnpauledstrom4491 Жыл бұрын
Awesome
@tanyabonnette1796 Жыл бұрын
@@brendakeiner5791 wow I’m impressed! I’m 65 my husband 66 and I think it would def be a challenge
@bill_astro_music Жыл бұрын
That silicone bead trick with the blue tape is gold!
@C_Har Жыл бұрын
I wish I could comment on all your videos. I'm 1000% a newbie at laying flooring-I'm not even good at getting the chain back on my kids' bikes. We needed new flooring for over 2500 sq. feet. the installation quote we got from several folks was astronomical in my opinion. I watched everyone of your videos, invested in the same tools you used, and in a week I finished our house. If I had a question or ran into a problem I found one of your videos-and could figure it out. I wish I could show you the before and after pictures. Thank you for your work and God Bless you!
@darylkesler8470 Жыл бұрын
Brother that was full of so many tips.. it needs to be watched more than once...You know your floors!
@sothatshowyoudothat Жыл бұрын
Glad it was helpful!
@RobBigelow-q9c Жыл бұрын
Honestly one of the better teaching videos regarding this type of flooring. Other videos are stylist for youtube but this is just actual DIY stuff. Awesome.
@0-60STYLE Жыл бұрын
It's nice watching a pro work, I watch this while I'm taking a break from the installation 😂
@bigsidable Жыл бұрын
Joe. You are,amazing. Professionalism is a honor to see. You attention to detail is awesome. I've done five flooring jobs thanks to you. Save so much time. And the process was smooth as silk. Thank you. May God forever bless you.
@firerescue3214 Жыл бұрын
Out of all the dozens of videos I watched, your video by far is the best. Had I just seen yours first I would have had time to watch other stuff.
@DannerCando-ev4fo Жыл бұрын
You just come across as the nicest human being. Thank you.😊 And thank you for all the helpful information on your channel.
@botsman357 ай бұрын
I am a handyman and deal with installation of laminate and vinyl board flooring occasionally for at least 10 years. Week ago started a new project - over 2000 sq. feet of vinyl planks floor. 57 " x 9" x 7.5 mm, very sturdy commercial grade. About the same time I found your video on KZbin and liked your idea to use scrap pieces as an anchors and cheater board as well, it is working great! Thank you!
@KimGossett-h3r7 ай бұрын
I dont hv a question. Just wanted to compliment you. I watched your videos before installing my flooring. You said dont put any extra pad under the flooring other than what's built in with it. I tried the underlayment in my kitchen & it had movement & didn't stay together well. Took padding out, used none in the rest of my house. Has done perfect. I've told several people to watch your videos. Thank you for all your tips!
@MrKen59 Жыл бұрын
I was helping a friend install laminate floor and I can’t tell you how frustrated I was trying to make it work. I simply don’t know how do this calmly. I’ve done my house and it turned out nice, but this particular project put me over the edge. It took so long and nothing was working. After the first day, I was asking God to help me through it because I was so done with doing floors. The second day was much different and went better. They bought the style select floor from Lowe’s and suspect some of the frustration was material related. They simply didn’t have enough income to pay 4$ sq door for vinyl. Not sure why I’m commenting, but I will say that you have a gift. I was reviewing your tool recommendations and I appreciate your prayers at the end.
@artkyger34256 ай бұрын
I just bought about 200 sq foot of style select floor from Lowe’s so I hope not a major pain. I used Home Depot Life Proof before and it was a pience of cake. Update to this comment. The style select is very easy to install.
@artkyger34256 ай бұрын
I jsut bought 230 sq ft of Shaw Brighton Golden Hickory vinyl from Lowe’s and I hope it is not a majot pain. I have done vinyl before and had zero problem. But that was Home Depot Life Proof.
@MrKen596 ай бұрын
@@artkyger3425 this was style select that I had problems with. It was the basic budget laminate. I don’t know the answer, but I strongly suggest making sure the floor is prepared and TAKE YOUR TIME. If you need a break, take it. I was so frustrated and why watching this guy made me mad because you will never see a blooper or a cuss word on KZbin. Take time to breathe and don’t force anything - that’s the only advice I can give. I have the 1.29 sqft in all my bedrooms and it looks beautiful. I had one style that was harder but worked out and I’m satisfied.
@afterstars5 ай бұрын
@@MrKen59 not sure if the price had anything to do with your install. Many laminate flooring types are more than vinyl. Like anything the more work you put into the planning and preparing, than the easier the job is.
@kevinzep019 ай бұрын
Great instructions! Wish I had found your channel before I installed my flooring! But I love watching a professional work!
@maxsmart8786 Жыл бұрын
Thank you very much for all of your teaching and encouragement Joe. Wife & I have started a half house project and we feel fairly confident after wachting many of your videos multiple times and having never installed vinyl plank before. We completed our layout from the hall as you suggested and established our first three rows in the kitchen and locked them down last night. Just as you said the middle of the hall worked out perfectly even for all of the walls in the other rooms. Thank you Joe and we pray for you and your family in Jesus's name right here in southeast Idaho.
@traceyjaron106 Жыл бұрын
Hey Joe, wanted to add to the pile of thanks in the comments :) My boyfriend and I have been installing 900 sq ft of LVP in my first home. We would've been absolutely lost without your videos!!! Thank you SO much for your detailed and descriptive explanations. You're the best!!!
@littlefishinwater3375 Жыл бұрын
Oh that prayer at the end brings me tears 💕 God blesses ❤❤❤ it's such great details for the most difficult parts of the job, how to get the ends and bits fitted into the installation. So helpful for my planning! And So grateful to stomp upon your video.❤
@TheBlueScarecrow Жыл бұрын
I regret not seeing this video, and all the clever tips, before I installed the vinyl planking. Great video! Thanks so much. You are a great teacher.
@blaster-zy7xx Жыл бұрын
The tips you did through the doorway is EXACTLY what I as looking for. I have to start in a walking closet and move into the main room. Also will use the tip for the bathtub, but use it for the transition into a bathroom door with a stone threshold. Thanks a bunch.
@GarrisonFall10 ай бұрын
Its fascinating to watch a skilled craftsman at work - there is so much planning, calculations and decision making involved. You are also a very good instructor. Showing and doing, how and why. Brilliant.
@mathewmanzanillo80913 ай бұрын
Hey Joe - I installed LVP flooring 3 years ago in my dining room, foyer and living room. I have to give recognize you and give your our props b/c I followed your advice in finding the center point to the rooms from one side of the house to the other, by cutting out a piece of the drywall and measure from the framing of the house itself. I am now going to finish off the remainder of the home and b/c of you! my planks meet perfectly in line with the adjacent room so I don't have to install transition strips on both openings from where I will begin. THANK YOU! for you tips, wish I knew which video it was but I'm sure you know. THANKS AGAIN!
@schweaty5 ай бұрын
A true professional, came here to find tips for installing last row of laminate and now i find myself wishing I'd found this video before starting 😂 excellant video, thanks a bunch for being so thorough and making it look so doable
@dean9498 Жыл бұрын
I like that Lixie dead blow mallet your using. Great advice your putting out for the "diy" people. Your methods are very similar to the way i do floors. 35 years I've been doing hardwood floors. Really is good content your producing.
@cesargarza519 ай бұрын
After seeing so many videos, I found you 👍 This video is what I was looking for weeks !!! You are very humble person and good teacher, congratulations
@cadillacdeville4783 Жыл бұрын
This Is The Video To Watch. Over N Over N U Will Be A Pro. Like This Guy.
@CindyMac4104 Жыл бұрын
Easily explained, actually watched the whole thing- I would have my brother-in-law handle it. If it were a painting job, my sister and myself would have done it, if it were just one room, that is. I to have the attention span the size of a gnat! Simply put, I think that this vlog was explained, no bells & whistles…you just get right to the point - in a nice way. I find that refreshing. You weren’t trying to sell anything, you were just telling the viewer what you were going to use next (in my opinion). I find yours so much easier than some of the other vlogs that I have watched. The less stressful that you made it seem, the viewers are much more likely to try this first themselves before hiring someone which will cost them a lot more money…especially now. You made it look easy…way too easy! Well done, sir. Well done.
@gcoffey223 Жыл бұрын
I really enjoy your work. I got an upcoming project coming up. Can't wait. You are my favorite to watch and your tips are genius. I know I will have some issues but you give me a lot of confidence. Cheater boards, screwed in planks, transitions, floor prep...you are a master of your craft.
@thecollector779 ай бұрын
From one Joe to another.Thank you so much, Joe.God bless
@timothyglover698 Жыл бұрын
You make it look so easy! That is called talent. You are a pro in your trade and it shows. Thanks for sharing your knowledge and teaching us in such an easy way for a layman to understand it. God Bless you any your family.
@sothatshowyoudothat Жыл бұрын
Thank you!!
@BrentSchuleman3 ай бұрын
Hi there, I've watched many of your video clips and its now inspired my wife and I to lay laminate flooring in our bedrooms. Never thought about it before, but now look forward to the challenge. We start on the first room tomorrow!
@sothatshowyoudothat3 ай бұрын
You got this!!
@kathleenrutherford733 Жыл бұрын
Absolutely Beautiful work, thank you so much for sharing your expertise and knowledge, I am extremely grateful for all the work it takes to do such a wonderful job and taking the time to film, edit, and share it with us God has truly blessed you, your family, and team. You all are blessed to have each other
@sothatshowyoudothat Жыл бұрын
Thank you so much!
@patmash Жыл бұрын
Tackling this job in about a month or so. Appx 1200 sf. Your videos are so valuable. God bless you and family.
@JohnSpanos Жыл бұрын
The trick with painters tape for the caulk is so helpful! Thank you!
@Bigfoot1957 Жыл бұрын
I really enjoyed this video. I'm going to install plank flooring in my bathroom and the way you cut around commode drain was really helpful. I was worried about doing that. Thanks again Gary.
@rorromorro3839 Жыл бұрын
Awesome work sir. You are an inspiration to many DIYers out there. Including myself. 🙂 And I have installed laminate flooring so I know the work you are doing is top notch. Our results turned out great as well!
@victorletner63705 ай бұрын
You helped make my job easier for my first time doing this! Thank you for doing this video 🙂
@ckrupsha4 ай бұрын
Thanks!
@rraymond2007 Жыл бұрын
You are one of the best teachers I’ve watched. Thank you.
@sothatshowyoudothat Жыл бұрын
That means a lot!
@conradmorin1891 Жыл бұрын
Thank You so much for your great video and expert advice on tools to get to get the job done........so, so appreciated. I will be looking at your other videos, now that I have stumbled on this video. >>>You have given me excellent tips throughout the video.>>>My grandfather aways said to me growing up as a young boy, "That you can never buy experience"---He was so right, not that I ever doubted him......He will always be my hero, as he taught me so much.
@GabeGonzalez Жыл бұрын
I’ve been watching a ton of videos on how to install these floors. Your tips, tool suggestions, and production value of your vid’s are outstanding! Would love to see your suggestions for which planks are your top recommendations
@frankdavis1972 Жыл бұрын
You are a life savor, thank you for the very helpful videos, you have saved me tons of money and time.
@danielede.6660 Жыл бұрын
God bless you and your family, thank you sooo much for sharing your knowledge so well. 👍🇨🇦
@clintprice2123 Жыл бұрын
How about a video showing those who don’t know how to undercut the door casings, additionally using the foam siding board to rip the strips on with the circular saw while only nicking it with the saw. Lastly those Milwaukee markers are absolutely the best out there. Nice video and you showing how measuring and layout make all the difference in any job. You have a nice and natural way to describe what you’re doing g and the viewer can follow along. I will look for future videos, I just retired after being a self employed color 45 years. Wishing your a prosperous career.
@flatcreek4665 Жыл бұрын
Have been binge watching your videos and subscribed. You are a great teacher and appreciate you sharing your knowledge and skill! Appreciate the Prayers as well! The kids are now out of the house and we desperately need to get all the carpet OUT of our house. We have purchased the Mohawk LVP and are ready to get started. God bless you sir!
@vasquez1024 Жыл бұрын
Awesome tutorial! Enjoyed the video and learned a lot and thank you!!!
@stroys706110 ай бұрын
Excellent! I have a diy job in the bathroom with all the cuts you showed.
@plainnpretty Жыл бұрын
the wife & l are fixing to do our house in vinyl planks. This is going to help lots thanks
@icarussisyphus11 ай бұрын
The best install video I have seen. Thank you!
@LeonardLennyGusto Жыл бұрын
Awesome videos! This guy is my go to for tips and how to’s. Seriously thank you so much!
@RedheadedMusic Жыл бұрын
Thank you for an insightful practical video, we are about to install LVP in another home and always need to find better more efficient ways to do this. I just ordered the spacers
@Bewana Жыл бұрын
Great tips and advise. Especially the cheater board.
@kevwoods68277 ай бұрын
The silicone tape was a great tip many thanks Joe 👍
@mnoo2600 Жыл бұрын
My husband insists on click lock flooring and I would like that as well, specifically the ones you have reviewed as water tight and strong click lock sides and ends. However, we are doing almost 1800 sq ft and there isn’t a completely level spot in the house (double-wide) that I can tell. Are the LVPs that you recommended too rigid for our floor? Would they break? Is there any that would do well for a floor like ours? We are using a floor patch to try to help with this issue and then 1/4 inch underlayment over that but it still will not be completely level.
@zachdavis2641 Жыл бұрын
Love the content. Preparing myself for a whole home install on personal home. Your videos are the best here on KZbin. Very educating. Love the cheater board method 👍
@sothatshowyoudothat Жыл бұрын
Thanks Zach! You got this!!
@scottcampbell4116 Жыл бұрын
I do too!
@dianneburton2940 Жыл бұрын
God bless you. I will be tackling an unconditioned cottage this coming spring. So glad I found your videos before I start. I now know the type of vinyl plank I need and which one to buy. Thank you.
@sothatshowyoudothat Жыл бұрын
No problem!
@Ben83597 Жыл бұрын
Thanks for sharing and helping others.
@annamatre4577 Жыл бұрын
good tips, thank you. God bless your show! and Amen! to that!
@ПетарЂаковић-в2о2 ай бұрын
AWESOME CONTENT! Great job my dude
@steveflores9654 Жыл бұрын
OH man, I'm getting ready to do this type of flooring in my bathroom. It's a small bathroom but this was really helpful.
@JR-xw5dk10 ай бұрын
Thanks for the great tips, very well done video. I hope I do not need your tips. Getting too old. Vinyl plank flooring has come a long way.
@redbird275 Жыл бұрын
Excellent instructions as always. Just a suggestion on the music background, the varying sound levels are distracting. Your video would be just a good with no music at all. Thank you.
@coreychmiel Жыл бұрын
One of the best video I’ve seen. Installing 400 sq fr including 3 rooms. Without thresholds. Thanks Joe! Your a seasoned mofo!
@columbusmotorhead5966 ай бұрын
What brand and color is the flooring in this video? Thanks in advance. Very informative video sir!
@pamelajefferies3197 Жыл бұрын
Thank you so much for all calm skilled helped you give. I am getting ready to put my flooring down . My question is what are the best kneepads I can buy ?
@sothatshowyoudothat Жыл бұрын
You can do it! The kneepads I use are Pro Knees and you can find them here - www.sothatshowyoudothat.com/tools-supplies-materials-installing-laminate-vinyl-plank/
@ze_german2921 Жыл бұрын
I have vinyl plank in two homes. It is now being installed in 1/2million dollar houses. This used to be the best option for rental properties. Nothing beats the look and feel of actual Wood.
@Krhys17 ай бұрын
Amazing stuff, thank you very much for this video.
@viskimiski207811 ай бұрын
Nice job, 👍. One question, i want to install laminate on a wall, what should i use a glue, a silicon or some kind of specific item. Thanks
@TylorWilliams-z6h Жыл бұрын
Hey bud I just started my business and I’ve been watching you man thanks for all the tips and knowledge but above all praise our lord and savior Jesus Christ, as soon as I heard your prayer and blessings bestowed in his name I subscribed thanks man much love and respect
@mikecoughlin4128 Жыл бұрын
I spent two days planning the layout! I’d never done flooring before and I plan everything so this project was extra, lol. I took my time and it came out great. I did half my basement and a connected bathroom and hallway. No tiny pieces, no issues, and that was 5 years ago. I used laser lines and lots of measuring but I’ll admit, I did not do some of the things you did.
@gabrielgeorgeian6477 Жыл бұрын
Excellent job. I liked it. Thank you for it.
@JVinOlathe9 ай бұрын
Really helpfull video. I have a question, the master bedroom is long and the direction of the planks is very obvious. However, the bathroom is long in the opposite direction. Can I change the direction of the planks 90 degrees at the door and install a transition so they are parallel to the tub and shower and I don't have to place the planks ends at the tub and shower instead of having f the long side of the planks parallel to the tub and shower? Hopefully my question makes sense. TIA.
@allaboutdetails3356 Жыл бұрын
What’s the best underlayment for extra sound protection?
@dporrasxtremeLS38 ай бұрын
This is A Fantastic Video!!! Thank You!
@ECO-AFRO11 ай бұрын
God bless, sir, for sharing the knowledge
@israeldavila1876 Жыл бұрын
Say bro I'm a carpenter and I do floors also I have one coming in three weeks and although I know floors your video helped me out especially going from room to room thank you for the knowledge 💪💪💪💪💪
@ericbrocious6047 Жыл бұрын
Great and helpful video. One question. Do you need that “sentinel” underlayment? Or can I just go right over old linoleum?
@andrewlelea3182 Жыл бұрын
Awesome video. Working backwards is quite a challenge
@VladimirRodriguez-tt3rz Жыл бұрын
Hi Joe, Love the color on this flooring, Mind telling what brand and color ? Ty
@billytheman9 ай бұрын
Nice job as usual, but why not use the silicone in almond or biscuit to get closer to the tub color?
@vinceferraccioli4661 Жыл бұрын
Great info keep it up. You have given me some very helpful tips. So what is your most favorite vinyl planks to install
@and1chewy1 Жыл бұрын
Nice addition. Are there any concerns with doing vinyl plank in a bathroom? Things like warpage with the amount of moisture in that room?
@gingerspurlin7337 Жыл бұрын
Thank you for your videos and Prayers! How to you space under baseboards? You cant use those spacers under baseboards.
@elhnet2000 Жыл бұрын
I watched your video and this will be the first time I will be installing a vinyl plank floor in my basement. You have given me some confidence in doing it. My question is, what type of marker are you using to write on the plank? I assume it's erasable. Thanks!
@phil-fr4lg Жыл бұрын
Excellent video and very well instructed with why and how! Top shelf DIY...🙂
@sothatshowyoudothat Жыл бұрын
Thank you very much!
@joeydevick Жыл бұрын
the best instructions by far! Question - when do you use the lining between the subfloor and the LVP? is it always necessary?
@AltruisticWarrior Жыл бұрын
For wood based LVP, yes. Can get away without it with SPC type over concrete but still wouldn't advise. It's best to have a vapor barrier in between regardless of whether you have wood or concrete subfloor.It's a very affordable component in the flooring install.
@doncc6080 Жыл бұрын
Thanks Joe very good info and instruction. God bless you richly.
@sothatshowyoudothat Жыл бұрын
Thank you
@donwilliams36268 ай бұрын
Very well done brother.
@jimadams9330 Жыл бұрын
I am planning to do a kitchen and connected hall with a step down. The one step is perpendicular to the direction the planks will run. Do I install the plank(s) on the step the same direction as the floors? Also, do I need to worry about keeping the planks in the hall aligned with the ones in the kitchen? Great tips!
@julieshaker225 Жыл бұрын
Great videos! My kitchen floor is tiled and has large grout lines to make it look old. Years later i painted and stenciled it because it was cracking. I did everything by the book and now the paint is peeling in big pieces. My question is I want to have vinyl planks put over it. Do the tiles need to be taken up which is now bringing the price a lot more, or can a lining or leveling compound be layed down first? Also is there a compound that can fill in the cracks?
@haroldseaman4243 Жыл бұрын
Thanks for the videos can't imagine how much you here this you deserve it want add mine to the pile! This is has come in handy so much in the past year I've been able to do flooring for two buddies and several family members thanks again for the knowledge 😊
@sothatshowyoudothat Жыл бұрын
You're very welcome! I appreciate you sharing!
@morokeiboethia6749 Жыл бұрын
If you are using a circular saw blade (miter saw, skilsaw, etc) to cut vinyl plank a good saw blade to use is the Diablo Trex blade thats used for cutting Trex composite decking boards. All circular saw blades will cut vinyl plank but most of them will dull very quickly if you aren't using a blade with the correct tooth profile. The blades that have a gem-shaped tooth and have a low-negative hook angle will cut vinyl planking and not go dull. If you put a wood blade on and cut vinyl plank, it seems to do good at first but by the end of the day that blade is ruined. Wood blades have a different shaped tooth and have a positive hook angle and they dont mix well with vinyl planking.
@dreid4760 Жыл бұрын
How about a carbide tip blade?
@morokeiboethia6749 Жыл бұрын
@@dreid4760 All circular saw blades have carbide teeth. The rest of the blade is regular steel. Carbide is certain form of steel that has a higher ratio of carbon and that makes it much more dense. We tried a few different blades cutting vinyl plank and they all cut great at first but by the end of the day you'll notice its chipping the plank a lot. That means it's going dull. We put a Diablo Trex blade on and did not notice any dulling after 3 days. The other blades we tried were all wood cutting blades. All have carbide teeth. The difference in the Trex blade is the shape of the carbide teeth and the angle that the teeth lean (hook angle) relative to the center of the saw blade.
@dreid4760 Жыл бұрын
Thanks I went to Menards and I could not find Diablo Trex blade. There was a laminate blade, is that it? @@morokeiboethia6749
@tonyp9609 Жыл бұрын
Great video, Done this a few times and still learning. Thank You. Do you recommend SPC Vinyl ?
@cygnusa3772 Жыл бұрын
Hey great video. What are some tips when installing plant the opposite direction? For example I go down my hallway into the living room, 1 directly will be easy to snap everything in, but the opposite side will not be.
@chriscole4697 Жыл бұрын
What ensuring that initial chalk line is straight, if you’re referencing a crooked wall, won’t that chalk like be off?
@richardwturton7238 Жыл бұрын
Thanks for all of your videos! They are great!! I do have a question on this one. Everything I've read says to lay the underlayment seams perpendicular to the way the boards are running. In this video you have the seams parallel. Does it really matter or not?
@stevenjones5636 Жыл бұрын
You are the best teacher
@C-Mah Жыл бұрын
Just bought the spacers. Great video.
@sothatshowyoudothat Жыл бұрын
Thanks
@jibhook728 Жыл бұрын
Thanks for all your tutorials Joe. You have genuinely helped me. Have you ever cut the bottom of toe boards to install or is it just better to use quarter round? Thanks in advance
@jamiewhiteway205 Жыл бұрын
Hi aim a carpenter from England UK and I think it always looks so much better to mark toe board and wall and then remove toe board sand and give one coat of paint,once your floor is laid tape all round edge of room and then refit boards easily because you marked wall and board,fill and sand any holes and give finishing coats of paint ,then score round edge of toe board and peel tape off , job dun mate
@edwardwade269611 ай бұрын
You Sir are a flooring genius. I’m about to do my basement. I hope my knees hold out.
@rubenayala1222 Жыл бұрын
Thank you sir for the great content. I have installed vinyl plank in entire upstairs of my home. I need to do the downstairs now. A bit intimidating with having to level out the concrete and having transitions to tile. I know I’m watching your videos I can do it. Thanks again.