Line 6 POD GO Beginners Guide & Demo w/ Tom Quayle

[@matthewwilkinson9548]

Just bought one of these and as a beginner in all things 'guitar-tech' related, I've waded through about half a dozen 'how to' you-tube guides figuring out how to get started. NB: Line 6 tutorials for this product are highly esoteric and incomprehensible to be honest. This is by far the most concise, straight-forward and well constructed video's I've seen on the Line 6 Pod Go so far. The film-maker has concentrated on what his audience would want to know about the product rather than filling up airtime with playful 'bantz'. Thank-you Tom.

[@nekkenek12]

Use a PoD go for about 1,5 years now and still have a very good feeling about the unit

[@bjorknasty2870]

Got this unit for Christmas, and i couldn't be happier. S-Tier gift.

[@mikecorey8370]

I've had this unit for 18 months. Lots of videos, and this, hands down. is the best. I've yet to really deep dive into it. But the key is writing your own presets, or downloading presets other people have written. There are some really good ones, and some really bad ones. The other thing is monitoring. You need good monitors or headphones. Low quality monitors do not do this justice.

[@jeanpierre72]

I bought one; love love love it. Had a Pod XT Live back in the day and it was ... ok. This is leagues ahead and I feel like it's the Swiss Army knife I will never sell. I tried several other modellers and I'm so glad I happened to buy back into the ecosystem; a ton of experience and lessons have brought Line 6 to this point imo Not sure if he mentioned, but part of the price point is that it has only one SHARC processor, instead of the two that Helix(es) have ... so you can't do the parallel amp thing and you can get limited to the type of blocks you can add to a preset, depending on how complex the amp or effect model might be. No big deal for me. Like another commenter has said, look into the snapshot functionality ... it's cool ... for each of the 265 presets, you get 4 snapshots ... that is, 4 variations of each preset, so that you don't have to manually switch overdrives, delays, twiddle knobs and parameters ... just set up 4 different combinations of each preset and switch with no gap/glitch ... cool. One thing, when running into a PA/traditional FRFR amp, you will get the sound of a mic-ed speaker cab, which can include some speaker cap fizz when heard through a FRFR setup ... I've read a couple of articles about why this is , compared to how this isn't an issue with an amp in the room, but not quite got my head around it yet. So, question, what eq are folks applying to get rid of the fizz in a PA-based setup? I'm running into a Behringer Eurolive. Thanks!

[@cpamiseso]

This, versus HX Stomp (or the HX Stomp XL one), what do you think? Do you consider freedom in chain sequence and multiple routing chain useful on live or recording setting? I'm intertwined between POD GO and Helix Stomp (plus some more pedals to make it easier on live setting).

[@aguspullol5297]

I'm about to get one, but with your playing you'd probably convince me of a metal zone as well ... amazing video!!

[@edwardprete]

The PG may not be as robust as others in features but IMO that is a selling point. Amp, cab, some pedals and you’re well on your way to some great tones. I’ve gotten some tones that have the same touch sensitivity as my amps. Great product.

[@CaisiusJ]

i mean if the choice is a shitty starter amp or this pick this. tbh you can get so much more then he talks about here.

[@gregsmith4406]

I just purchased this POD GO this week. Love it! You didn't cover the snapshot function - one of THE most important features for a gigging guitarist!! Maybe in a follow-up?

[@larryrola152]

What is that? Been thinking about getting one but was hoping there was an app to get preset patches like the spider amp

[@jeremiegalan007]

@@larryrola152 its like a patch within a patch. Once you have setup a patch, you can create snapshots inside that patch. Each snapshots will have settings or tweeking you like, etc. So no gap or sound cutoff whenever you change patch because you're not changing a patch but rather just a snapshot inside a patch.

[@youknowit4954]

@@jeremiegalan007bro what lol

[@jimmikus3089]

Does this allow you to have several pedals in a patch and turn off individual pedals from that patch?

[@anuragSingh-bz1sk]

​@@youknowit4954summary: preset within a preset = snapshot

[@kerryewen3624]

Great demo , I was on the fence , now going to buying it . You should get a commission

[@ChrisDeJuanMusic]

Total pro review, video editing and tasteful playing! I've had my PodGo for about a month now and am very impressed with the tones... especially when connecting direct from the main out's to my studio interface and also when connecting directly to a PA or powered speakers... great tones without the need of using a guitar amp! But I have to say... when I've connected it in to the front of my guitar amp I haven't been that happy... as even when bypassing the PodGo's amp and cab modelling blocks, the unit doesn't seem to work as a true bypass and still seems to 'colour' the sound and muffle the tone of my amp. I use a Roland JC40 for it's amazing clean sounds, but when going through the PodGo I loose the amps tone... as I say, even when bypassing the amp modelling and cab blocks on the PodGo, and even when using the direct Amp Out jack which can be configured to tap out just before the amp and cab modelling blocks.... Basically this means that I can't use the PodGo just as a multi effects pedal board (with no amp and cab modelling), am I doing something wrong? In any case, just for it's use in the studio or for practicing with headphones it's worth investing in one! Many thanks

[@fishermanryan]

Hey Chris, please let me know if you found an answer to your question about using this PodGo as a multi effects board not working as well as you liked.

[@joepuglia2256]

Hi Chris, I have the same question. Did you get an answer?

[@LTJR.]

@@joepuglia2256 I can’t say for sure because my 2 tube amps are being worked on right now, and I haven’t plugged my pod go into one yet. It’s possible that he may have global EQ on or a few things that may also affect that. One easy way to get around that, especially if you’re just running in mono, may be to use a passive/buffered dual side chain looper. Actually you could just use a mono Sidechain looper-The pod go can be in the loop, or switched out to go straight into the amp.

[@johnide2889]

Same experience here, Chris. I eventually bought a cheap little Headrush FRFR (flat frequency flat response) powered monitor which saved the whole deal for me. Now it sounds great (Line6 promotes their Powercab for the same reason). My conclusion is that digital processors (at least this one) sound way better through pure digital signal chain and amplification. Currently I use the Headrush wedge as a monitor, including house mix from my workstation into ch 2 on the back of the Headrush, and go direct to house in stereo to take advantage of all the lush stereo reverbs, delays etc. Not the same thing as a tube amp, just different. It's got own thing happening but it's really damn good, super portable, flexible and useful. Suggestion: make separate hum bucker and single coil presets for your favorite patches.

[@robgerety]

I am hoping to find something like this that will also serve as a pedal board into my small practice tube amp. Does the Stomp XL or the Helix LT function better in this sort of use?

[@ProfessorShyguy]

Look at the self-control on this guy. Waits 8 minutes to play some super clean shreddy riff.

[@Cam_B]

IKR? It's almost as if he was dying to find a good spot where he could show off his geetar skillzzz

[@nigeldaddyo]

This is a little long but if you're on the fence about modeling this could be a worthwhile read. I bought one of these for late night practicing through headphones and the occasional fly gig/jam. It sounds so good to me that it has become my main rig, but there’s an important catch- I bypass the cab sims and put it straight into the fx loop return of my Bad Cat Cub 15R because, let’s face it, FRFR systems cannot recreate the “amp in a room” sound. Although I’m not about to part with my Eventide H9, the effects on board are good to excellent. I’m still pretty floored by how uniformly great this setup sounds. Just so you don’t think I’m some easily impressed noob, I’ve been playing since the early 80’s and own or have owned great amps by the likes of Mesa (at least 6), Carr, Friedman, Budda, Fender CS, Orange, Rivera, Revv, and so-on. I’ve had my favorites from these brands and I can really say that the Pod Go into my Bad Cat’s fx loop return puts as big a smile on my face as any of the above amps. Maybe I just got lucky and the Bad Cat just happens to “like” the Pod Go and it’s a great combination just by chance? Eventually I’ll pull out other amps to find out. I also think it’s important to mention that in my experience it doesn’t sound good into the front of an amp which makes sense given that you’re putting a modeled preamp into a real preamp in this scenario. Modeling has really come of age IMHO. If you’re tired of lugging a big rig around and you’re intrigued by modeling but don’t like the FRFR experience you should consider this kind of setup. You may be very surprised. Oh yeah, the day after I bought this I got an email from Fractal as I'd been on their waiting list for the past 6 months for a FM3. With all the confidence that I was making the right choice and zero regret to date, I told them I was going to pass. YMMV

[@rickhammel9541]

what's a FRFR system? nice review btw

[@sprenzy7936]

So you just plug it in a 1500$ amp? KK cries in poor

[@Eric-dd8bk]

Exactly. People just plug into the front end of a guitar amp and think a modeler is made to turn their crappy tweed amp into a Marshall JCM800 or something. When in fact a modeler is an amp on its own with a microphone as a part of its signal chain. Of course you can't plug it straight into a front end of another guitar amp and of course it doesn't sound nor feel like how an amp would in a room. So glad to stumble up on an experienced tube amp user who is aware of this simple fact. Unlike many of these tube snobs that don't know what they are doing and this simple fact and just bash modelers and their users.

[@Eric-dd8bk]

@@rickhammel9541 FRFR speaker is a speaker made to reproduce the exact sound of what you feed it. Unlike speakers that are in a guitar cab that have its own signature EQ curve that alters the sound you feed it. So a modeler is modeling the full signal chain including the guitar cab and a microphone. You don't want to plug it into another guitar amp. You want to hear its exact sound with an FRFR monitor instead of a guitar amp.

[@engremeraldsignar9522]

FRFR -flat response full range speakers.example would be the Headrush FRFR 112

[@jonwebb3936]

Just ordered one. 2 weeks off over Xmas. I just know what I’m going be doing!!

[@dougboyle5010]

Super informative and comprehensive. Well done. Great playing as well, Tom.

[@ShaneIrwin7]

Wow thanks for the tips! I bought one yesterday, and now I'm learning a bit about it before it arrives here. I'm pretty stocked. Well done video.

[@petercook3911]

Really well produced and informative tutorial, thank you!

[@jcserrano1663]

Dear Tom, I love your videos and the truth is that it doesn't matter what you test it sounds Amazingly Awesome!!! 🤩🤩🤩🥰🥰🥰🤗🤗🤗🎸🎸🎸

[@nedludd3641]

More please - love it

[@MauricioGarcia-mk5bz]

Tom thank you for this video. One question... Global settings how should those settings be?

[@azismann]

such a great overview. thank you!

[@mariodriessen9740]

I recently purchased one of these, but they don't come with a paper manual anymore (yes, I'm an old guy), so I decided to watch this video and learn. And I did. You know it never even occurred to me that you can not only turn the knobs, you can push them as well! I know, I'm an idiot, but I grew up in a time when we didn't have personal computers, smartphones and all of that. I bought the Boss ME-5 and if I remember correctly that was the first programmable floor processor. I was ahead of my time! And now? Am I getting too old for this? I'm not going to use it live. I want some decent amp models and plug it straight into my audio interface and record it. I should be able to do that. Damn, I feel old. 😖

[@larrystoltenberg8361]

Mario, I just bought one. Plan to use it for recording, but who knows? It could become my live rig! I was born way before cell phones! I bought the Boss DM-2 when it came out! There is a manual at Line6.com that you can download. Watch the videos and learn. We can do this!

[@mariodriessen9740]

@@larrystoltenberg8361 ; Hahaha..., thank you, Larry! 😄👍

[@larrystoltenberg8361]

@@mariodriessen9740 We might be old dogs, but we can learn new tricks. LOL

[@robgerety]

I can't even find the channel I want on my TV. 😊

[@richardlee8230]

Amazingly helpful video and excellent delivery!

[@davidmurray9193]

Ordering one in two weeks, going to throw it on my hk blackspirit 200 floor amp into my tascam dp32sd, going to be a saddo and wrap it up.and put it away for Christmas to myself to ease this shitty year 😁😁😁😁😁😁😁

[@drunkaviator81]

Very useful video, was considering this vs the Stomp XL. You've sold me on this; seems the interface here is far easier to navigate!

[@deluxetone]

Thanks for a great overview and tutorial. Fantastic playing as always.

[@arenimsong3227]

Awesome demo 👍 can you do a review on Hotone ampero.

[@amirhosseinghasemzadeh3103]

Thank you so much for information 🙏🏼

[@stevenboldt6489]

Great walk-through. Thanks.

[@israelr6636]

Thank you for the awesome video.

[@ritupabankotoky]

thanks for the video

[@portuguesebeer5069]

Awesome! I have subscrived today, because i really like Tom Quayle's videos! Next id love a review on Boss GT-1000 Core! Cheers from Portugal 🍺🤘

[@ikewashere]

Best I’ve seen yet, thank you

[@PaoloC.]

A little gripe is that you got distance from mic to cab but you don't get to move the lateral position.

[@jamdalf4343]

Come-on Man, if you're that picky get a Helix!

[@alexanderboggs7482]

On the 8th day.. God created IR's..

[@Eric-dd8bk]

@@jamdalf4343 Even Helix can't do that.

[@Eric-dd8bk]

I use IRs for that.

[@jamdalf4343]

@@Eric-dd8bk Ok, I stand corrected, but then that also makes bitching about the PodGo not having that feature even more silly!

[@ricotinez]

Nice Posies intro!

[@hashmark13]

So I can use this unit with my Katana Amp and use the amp and cab sims? Or do I need to turn those off when using with a regular amp?

[@rickhammel9541]

Do you know if you can assign an effects parameter to the expression pedal, or are they locked to volume/wah? For example, say you want to control the speed of a tremolo effect, or the amount of feedback from a delay pedal.

[@ricotinez]

At 07:04, he shows how if you hold down the button of a given effects parameter, you can map out what controller works that parameter. You could assign any of those parameters to the expression pedal. If you watch the video slowly, you can see when he turns that knob, Expression 1 shows up. Pretty cool!!

[@rickhammel9541]

@@ricotinez thanks for the tip!!!

[@st8ofinfinity]

These tones your getting are excellent!! Are you running that right off the go?

[@accentontheoff]

Hi, I was on the verge of buying the Pod Go and now I am reading about this guitar input impedance issue which kicks in when the Pod Go (the non wireless one) is plugged into the front of an amp. I believe the issue leads to a sound that lacks high end and I presume “life”. Is this a real issue. Any advice would be appreciated. Thanks!

[@earlteigrob9211]

Great Demo!!! Thank you!!! Can you save all your settings to the desktop app so that if your unit blows up you can reload them to a new unit?

[@nekkenek12]

And thanks Tom 👍

[@thestilettos777]

Hey Tom, just picked up mine a couple weeks ago...great video, but could you hit a little more info about the tap tempo...can't seem to get the tempo to work properly. Thanks...

[@RealDealPhill]

Is the pedal able to do “pitch changes” and able to hit divebomb type things like a tremolo?

[@KenIngwersen]

yes, with the whammy.

[@AH-hc5rm]

How can i play a backing track on this thing from a mobile device? Anyone got an easy solution that allows volume control of the audio going in and is in stereo via headphones?

[@GROWTASK666]

Helix Go

[@YEM_]

You said you were going to direct plug it into your existing audio interface. Did you run two cables one for L and one for R into your interface?

[@Kenoodling]

Question: When adusting settings are you able to hear them while adjusting or do you have to come out of the setting to hear them?

[@tattoofred]

Fantastic video,I am Spanish and I understood everything thanks ;(

[@laxbro7ify]

Great video. Ever consider uploading your patches?

[@giangtran3693]

Loại này tiếng hay quá 👏👍👍

[@tarmizi9145]

Can use two modulation ? Example chorus add tremolo?

[@jayminsdrumcovers275]

When your saving a preset, can you save the whole chain of effects say for like on specific song? Or does it only save one pedal.

[@jamesdalgleish9389]

It saves the whole chain as you have it set. If you use the Snapshot feature you can make 4 versions of the chain and switch gapless between them - I.e.lead, rhythm etc.

[@jayminsdrumcovers275]

@@jamesdalgleish9389 haha thanks! I figured this out a while back, but appreciate your response!

[@Elink321]

How does this compare with Neural DSP plugins according to tone?

[@sporegazm]

If you want to get weird...can you create a patch where you stack modulation effects? For example...could i engage a phaser, flange, delay and univibe at the same time?

[@Steamerbeen]

So amp out can go into input of a head?

[@elic307]

I've bey been updating my pedals very slowly, each time getting a more expensive one. The last one I got is mooer ge150. It sounds great but not like the one demonstrated it. I am not sure what is the reason (headphones in youtube vs amplifier in real life). Question is, is there a real difference between the cheaper ones and the more expensive ones in terms of sound quality or is it just versatility that makes the difference?

[@nashredder8516]

Sir will this work on garage band? And ipad

[@bcain5823]

I have a question about the Line 6 Forum. I recently bought a Pod Go, set up an account, registered my product and updated the firmware and software from the Line 6 website. I saw where they have a really good forum and was interested in posting to one of the topics about volume control. Once I got into the thread I noticed there is no way to post a reply. Am I missing something or is there something else I have to do to be able to post?

[@frontcentermusician]

Now get that sound through a favorite amp... sizzle!

[@LunchBXcrue]

So can you use one of these in place of a amp head? Or do you still need an amp head then run th fx chain out to in the input then the output into the cabinet?

[@rickhammel9541]

it's not powered, so you will need an amp of some sort.

[@KarlGeorges]

Gotta learn that last riff to impress some people :)

[@michaellux5849]

How did I get the exp pex to switch from vol to wah?

[@msgotmuzik]

Hi there... I am using this with my violin. I've created a patch with the blocks that I normally use (verb, octave, chorus). However when I use the octave and verb, the effect is lost. I've tried turning up their effect in the mix and it just doesn't seem as strong as I've had with other pedals such as the boss me80. What could be going on?

[@unknownfakename]

Are you plugged into an amp? Or do you need a special line 6 amp?

[@lance6554]

The pod go is an amp modeler with pedals all in one. So, you can plug into anything whether it be into a plain speaker, front of house at a gig, or straight into the sound card (on a computer).

[@jamdalf4343]

Do you have decent computer monitor speakers? Then USB it to your PC, the Pod-Go is it's own audio interface!

[@Eric-dd8bk]

It's modeling an amp, a cab, and a microphone. You can't plug it into another guitar amp that alters the source coming into it. You could if you want to, but you are never hearing what POD Go sounds like alone. Use FRFR monitor cabinets.

[@sawyerc.6033]

You need one of the Line 6 power cabs

[@nickminderman7380]

The last preset you were playing send archetype was that a standard or did you make that one?

[@spchaledonnj68]

When you use the Amp Out to the front of your Amp. Also the have cables from the main out's go to the PA. My question is, can you get sound coming out of the PA and the Amplifier combo amp at the same time?

[@tonyloco42]

Yes you get both, with the full Pod signal going to PA, but one gripe is that so far, you can only globally bypass the Pod's speaker cabinet/IRs to the front of your onstage amp - you cant globally bypass the amp model too, so you are effectively sending the Pod Go preamp to your onstage amp's preamp. Not ideal unless you switch off the amp models individually in the Pod. Sending the amp-out to your onstage amp's FX return is better as it is the only using the power-amp section of the onstage amp and therefore NOT double preamping.

[@spchaledonnj68]

@@tonyloco42 very confusing. Well I would use the amps pre amp.

[@Lukesboxdotcom]

tonyloco42 are you using FRFR speakers? The amp out (minus IR) Into an amps effects loop return (bypassing amp preamp) sounds nothing like that and I can’t get a usable tone out of it. It actually sounds better using the amp out into the front of the amp utilising the amp preamp - which it shouldn’t. Very disappointed with the usability with the amp out. It seems an FRFR cab is essential.

[@larrycavallucci3258]

Trying to set up my first preset, as it will be moved to 1A! For some reason, the word "Multiple" is in that box on the screen instead of the name of the block I want in there, like Glitz, as an example. Trying to set up my first one with 6 Effects in there as that will be my main preset, for worship music, i.e. Compressor, delay, Para EQ, chorus, and reverb. Distortion wouldnt work well in the church I play at! So first confusing issue with this board as NOWHERE can I even see a reference to that word in that screen, in any YT Vid, the manual or pilot's guide. Thanks in advance to anyone with an answer. ALSO is there a way to DELETE a preset in the left column?

[@fredparker3384]

Useable with a bass??

[@987654321ck]

Yes See Pete Thorn’s demo intro

[@SticksAandstonesBozo]

I’m so lost. I’m running it amp out into a tube amps fx loop and it’s like nothing is working.

[@israelr6636]

I have to plug into either my INSERT jack or INPUT jack or MAIN OUT left jack with the master volume at 12 o'clock on my Crate amp.

[@shane011471]

I need some help with this as I just got the POD GO as a gift. I will not use it in the normal way as I own a AC15C2 and just want to use this in front of the amp for the effects alone. I do NOT want this to change the sound of my amp whatsoever and have ZERO use for any cab and amp sims. Can this even be done using the AMP OUT and direct into my AC15? If it is possible what settings do I need to change to accomplish this if any? When I got this I acted excited as to not hurt any feelings BUT it's like what the hell am I going to do with this digital thing? Any help would be very much appreciated as I have had this thing for over a month and never even taken it out of the box and it's still sealed. If I am going to keep it and use it I would want it to be "invisible" until I added a effect and just use this as for the most part as a traditional pedal board so to speak. So my question is can it even be done?

[@stevesargent8731]

That's possible, you can bypass the amp and cab sims and as the AMP out is just a mono version of the main outs you should be left with just whatever effect pedals you'd set up. You can download the manuals in PDF format from line6.com for free to save you breaking open the box while you decide, they're under support/manuals/podgo/

[@fishermanryan]

Have you tried this yet Shane, how does it sound?

[@shane011471]

@@stevesargent8731 Thank You for the reply as I took it out of the box this last weekend and it works just as well as any pedal in front of my amp. I have spring reverb and tremolo on my AC15 so only having 4 blocks to use is not any of a issue really. I am going to keep it and Thanks again!

[@shane011471]

@@fishermanryan It works well as I tried it this past weekend. Just keep in mind you only have 4 blocks (effects) you can use this way at any one time. My amp has a reverb tank and tremolo so 4 blocks on top of that is plenty for me. It is no different if you put a digital pedal in front of your amp really. Hope this helps?

[@fishermanryan]

@@shane011471 Sure does, thanks Shane.

[@claude45]

I just got the Lin6 POD Go.... What guitar are you using?

[@drakeonyou]

It's his Ibanez TQM signature.

[@nmcpcj]

Hello and thanks for the video. IS there a way to play backing tracks? Since it lacks an Aux In. Thank you

[@flipturnsandbutterfly]

Use your fx return and plug in your phone or music device

[@theduococo4309]

Awesome instructions.. cheers.. just a side note.... this is gonna sound weird... but dude it looks like your wearing a 'Nuns Habit'.... its chair I know....😅

[@ivanravello5687]

why we dont' use just pedals guitar ??? does this unit need to be connected to a guitar amp to do the job ??? does only need a guitar cabinet ??? greetings

[@alainhochmann1396]

hi ordered one but don't really know if it will please me,want to go through my fender supersonic22w!!!what do you think it will be ???DO YOU USE AN AMP OR A PA,,thanks alain what's the better way to get better sounds amp or pa??

[@jamdalf4343]

Got a home stereo? hook it up to like Aux-in left and right channels to get the stereo sound. Hooking it up to a guitar amp will be only mono sound. Or do you have decent computer monitor speakers? then USB it to your PC, the Pod-Go is it's own audio interface, it should be stereo too. Go stereo!

[@robertnisonoff3907]

I was hoping you would show how to connect the pod go to a lap top, iPad, etc., and an amp for those of us who are not tech savvy and new to these contraptions. Your title says beginner's guide so please make it for absolute beginners. Thanks.

[@anekretia]

stops by to study up on pedal * gets stuckwatching Tom rip a new hole in the atmosphere * learns nothing and enjoys it

[@richardjunovaldez9177]

help ... I just bought pod go and the master volume doesn't work

[@110toacountrynearyou7]

I’m just confused on what you set your amp to. I just made it as clean as possible but idk if that’s the best idea

[@Tommy-pe2pt]

It's not as simple as that .for new people .this is very hard. Yes simple when U been using them your whole life. But hay great video

[@novakingood3788]

14:22 I see the Welsh Wizard has a preset of his own.

[@jesterraj]

I got the pod x3 live.....

[@frankalma6179]

Can this be plugged in direct to PA?

[@stevennetzel]

Yes

[@mksounds6326]

I know the Pod Go will USB into a computer as a audio interface, but what 1/4 inch out should be used to plug into the front of an audio interface? The "Amp Out" or the mono out? Sick playing by the way! Your outro lick was bad ass. Thank you, MK

[@JohnSpo]

if I close my eyes I'd think Jude Law was giving a Line6 tutorial.

[@james9e160]

review the product

[@bugsycline3798]

is there any way to hear the line 6 pod go plugged direct FOH without a stage amp using a full band? I've seen hundreds of youtube videos talking about how great the new modelers are live, but not one video showing an actual band playing one direct FOH... Jeez and skip the board recordings too, Just stick a good old condenser mic in the back of the room. I don't want to hear a studio sounding recording, I want to hear an actual demo of what these things actually sound like live in a room with other musicians. HOW HARD COULD IT BE ?

[@guitarpenter3357]

im not sure that this is compatible with MacBook Pro M1 silicon especially as an interface!

[@AlexHand]

You get a really nice, smooth tone out of those settings. Could you do a video explaining how you got there with EQ settings, etc? I got the Pod Go today and it's harder than it looks to keep it from sounding bright, clanky and artificial. I cut the highs but then it gets dull. I'm running a recently set up Ibanez with Lindy Fralin Pure PAF humbuckers straight into it and studio headphones out so I know the other gear isn't lacking.

[@sean7193]

did you get it sorted Alex? or did you pass on the pod go?

[@AlexHand]

@@sean7193 I set up a clean preset and a lead distorted one and saved them, but haven't been able to address those issues I mentioned. The drive sounds are better than a BOSS ME-50 but I'm not yet able to tame the hair enough to get a clean yet hot tone like he gets in this video.

[@sean7193]

@@AlexHand I hear ya. I just go it, and it has a decent alive distortion sound, but its too grainy and pushed. any other way and it sounds dull. maybe we should have went with the fractal FM3 XD

[@Eric-dd8bk]

There's a highcut in the cab block and a dedicated EQ block for a reason.

[@AlexHand]

@@Eric-dd8bk yes Eric, rolling highs off the EQ was the first thing I tried 🙄

[@andreslunaballesteros8553]

😎💥🎸🙏

[@jnikz]

Just got one and it sounds like crap, sometimes too loud, i may need to experiment a lot

[@JANvanX]

🤣🤣🤣 you may to think a bit more

[@gabriel_santana_86]

Hi Tom, big fan of you! :-) About to pull the trigger on this but I'm looking for info on the parametric eq within the fixed eq for every patch. Viewed info on the full Helix (e.g. here: kzbin.info/www/bejne/qZm6nJmFjs2Vpbs) that displays a similar parametric eq that I'm used to from my Katana amps. Question is if the parametric eq within the Pod Go is the same - especially if the low and high cuts are available in the same way. Would appreciate your input on this since it cannot be read in the manual (available online). Cheers!

[@nathaliemarty6570]

Point d evue sons, ces machines sont sublimes, mais au niveau utilisation... coté pratique, ils sont encore a coté de la plaque. 1. L'écran LCD est trop petit (pour le personnes qui commencent a avoir de difficultés visuel, c'est ma galère), 2. Cotė reglages, toujours des potentiomètres rotatifs... galère pour effectuer des retouches quand le pod est au sol et que vous êtes debout (vous vous payez une séance de génuflexion penible) 3. Je pense que l'entrée guitare est en mono et donc si vous possédez deja un autre appareil avec une sortie stéréo, vous perdez systématiquement la qualité des sons de la sortie du premier appareil ! Pourquoi ne pas conserver une véritable ligne stéréo si elle existe déjà dans les son précédents ? Pourquoi ne pas agrandir le systeme d'affichage et d'opter pour une télécommande bluetooth ? Pourquoi (aussi) être obligés de passer par un PC portable pour les mises a jour et les téléchargements ?... j'ai d'autres idées encore, mais je ne suis pas certaine que Line 6 soit prêt a les partager...dommage. En attendant, je confirme... les games ont de tres bon sons, mais sont impraticables et compliqués... la logique n'est pas présente dans ces appareils. On se demande si les concepteurs sont un peu utilisateurs.

[@jonasmartinsen3439]

Where the fuck do i find the activation code to register my pod go on the line 6 website????????

[@caseyspaos448]

Why is it so damn difficult for these companies (Line 6, Boss, Head Rush, etc) to make useable presets???

[@martinthompson2425]

“Useable” is a pretty broad term…the manufacturers make presets that demonstrate the vast capabilities of their products…and make consumers go “wow!” Unfortunately (haha), we end users have to do SOME work to get what we really want from these units. I’m willing to do the work and am probably going to grab one of these VERY soon! Great video!

[@bikersoncall]

When I save a factory preset into a user patch, it won't let me exit user banks/patches, and get back to factory presets.

[@csnymoodiesfan]

Why the constant flashing red light? It’s a bit distracting.

[@paulentertainingyoualways3800]

Only thing missing is the connection for the JTV series guitars ..

[@MartinCraneRockbeast]

kzbin.info/www/bejne/eqjXkHScpMqem6c Snapshots.

[@sixfoursoul2538]

sucks the tone right out of you amp , thought this would a good one, sticking with analog pedals

[@frankvazquez5974]

learn how to use it.

[@VincentKearney1967]

Everything sounds harsh , to much high freq’s . Nothing that can be fixed in post if recording but live might be tough . Thnx for the video .

[@PureJadeKid]

I think you can put an EQ at the end and dial out that presence.

[@larrystoltenberg8361]

Watch Rhett Schull's tips on making modelers feel more like a real amp. Global EQ helps the harshness.

[@Eric-dd8bk]

There are EQs and high and low cuts for a reason.