Source SDK tutorial - Doors

[@suop1234]

the good thing about the source engine is that tutorials from 10 years ago are still completely relevant

[@MiniatureGato]

For Real man, I just wanted to make some maps for me and my friends to enjoy.

[@IrishCoder]

@@MiniatureGatoyes

[@urmommy5]

I like how you just get into the tutorial instead of talking for 3 minutes straight. Liked.

[@Divine_Darkness]

what i mainly want to know is how do i make a hole in the wall

[@Divine_Darkness]

what does that do

[@RaptorEmpire]

Divine_Darkness Use caution with carving as anything you touch with it will be carved and this can create some pretty nasty side effects. It takes longer but the clipping tool is safer and more efficient. Carve can sometimes create extra unnecessary brushes.

[@goranfazlinovic4030]

just place a block like inside the wall in the way that is seeable on both sides of the walls.Then select that shape go to tools and then press carve and then delete and thats it

[@Nvshvil]

Place a Block in the wall you want to make a hole in (Make sure you can see The block on both sides) then select the block you just made > goto tools > press carve Creds:Ognjen Trivuncic Ogi

[@Nvshvil]

Place a Block in the wall you want to make a hole in (Make sure you can see The block on both sides) then select the block you just made > goto tools > press carve Creds:Ognjen Trivuncic Ogi

[@guiaanselmo]

Thanks for these tutorials, 3kliksphilip! I think they are just perfect: they are short, direct to point, informative, you talk clearly, and they always have something funny happening in the end. So it's also entertaining! Could you make a tutorial about how to do these events with the ragdoll/ falling walls like you usually do in these videos? Yeah, kinda a tutorialception.

[@dholmlund]

Thank you so much for this video!! I made a sliding door years ago, and just now I made a custom door without needing to use a pre-made door!! This vid is still important in 2020!! :D Thanks again!! :D

[@MaxKappa]

dude, thanks so much for going back through all your old videos and adding chapters. amazing work.

[@rorylidster4844]

this was very hype

[@fpscanada3862]

these videos are timeless. i have been referencing them for years on and off

[@nicksfilms6891]

whenever i make a door the texture is all glitched and if i make it the right size it shows multiple doors

[@mr.sebak2136]

Me too

[@jefferu2577]

Same mates, but ive got it u just have to keep trying :/

[@pecky7989]

this is why these tutorials are great. No 45 second intro "hey guys its xxxgamer420xxx here with my shitty ass 3d intro template" the first thing in this video not even 2 seconds in is the beginning and i appreciate it so much

[@ComradeCheekiBreeki]

i saw those damn trees

[@SimonJ57]

I would like to point out the [ and ] keys are a hot-key for decrease and increasing the size of the grid.

[@JKH-BDK]

I know most of these things... but I still come back for more of your tutorials, they're entertaining.

[@lucagross9161]

I love these, im planning on ,making a map and trolling my friends while we play hide and seek since i can now make sliding doors! lol!

[@joshuadenis3968]

Hey, How it's going ?

[@lucagross9161]

@@joshuadenis3968 Im going to be completely straight with you, the thought of creating CS maps has been so far forgotten in my mind. This reply saddens me by reminding me of my unmotivated sprits of trying to learn a new skill

[@joshuadenis3968]

@@lucagross9161 Ho god, I didn't thinked you would answer. How are you btw ?

[@mikkelfoss351]

how do u make a hole in the wall

[@mynamefrank6567]

+Mikkel Foss with the clipping tool

[@cobaltarts4832]

no

[@larkway98]

Build a brush where you want the hole, select the new brush, right click on it and select "carve"... delete your brush and you are ready ;)

[@larkway98]

+Hammy But it works perfect at simple structurs :D

[@Ethanolus]

If you lucky. I used this method on my first map (was learning hammer) and ended up with textures flying off there brushes in game. I'm not a very experienced mapper myself yet, but I wouldn't recommend carve. Better do it with separate brushes and/or the cutting tool.

[@RetroGamezNL]

Haha the end!!!

[@Boncarbs]

Haha

[@Noise-fe6dp]

Hello Philip! One particular door model still rotates in the middle despite changing both the little rotation orbs where I want them to be.

[@codecfur-303]

I know this comment is a year old, but for other people; making a door that doesnt rotate in the middle can be done by making a door similar to the first example (func_door_rotating) but making it invisible (nodraw) and then placing a prop_dynamic inside and editing the parent property to the name of the func_door. All child props (that are dynamic) move with the parent. if i explained this weird, sorry ;)

[@oklol496]

thx!

[@oklol496]

codec do you know how to make it so use closes the door? (non-prop doors)

[@wilkymay3548]

mark 'use toggle' on flags

[@magro8906]

@@codecfur-303 Heey thanks a lot comment of the past!

[@kapic9458]

Thank you man when i started watching you i had no clue how to make a map and now i can make my own THANK YOU 3kliksphilip!!!

[@xsixstring7]

I'm just pointing this out, but at 2:50, you've placed the door knob on the same side as the door "hinges." I know it was just an example, but others may mistake it as the correct side. Thanks for your recent uploads, I'm glad CS:GO brought you back into releasing Hammer tutorials.

[@aldxbaran]

Stuck on the adjusting door part. No matter what I do, the door stretches, and then pops back into the black outline tile thing. When I stretch it out or try to adjust it, it doesn't do anything but show me what seems to be a rolling film of doors.

[@ZZZxRv]

+IHate GooglePlus Try it with a different texture. Or remove it, then place it again.

[@Tristansfn]

I don't remember when exactly, but Weasel Level Design went over how to manually move textures in his "Basic Everything" video. But this comment is so old, you probably already know how to do it :)

[@davisbrunner5647]

I could find it in his video

[@oklol496]

use texture lock

[@haukencoh2168]

Thank you for putting effort into all of this, really appreaciate it.

[@zhenya0k808]

0:58 thank you very much i was stuck in this phase of making door but you finaly help me.

[@snitchables]

So well made, Altough it would be nice to see some new ones. Good to see that you're making videos again.

[@SuperMrmine]

You are the best in csgo sdk trailers thanks man

[@karma21ns]

a little late but thanks a lot,i was surprised to see that the video was yours since i am subscribed to you

[@AddictiveMusicNetwork-Official]

cant you use face edit tool then set to fit for the door?

[@nuc2726]

I can't change the world model to make a door handle. The menu has a black background with yellow text, and it's completely unresponsive. How do I fix this? Edit: Nevermind, it fixed itself. The solution? Just closing and reopening the editor lol. It still has an odd black background with yellow text, but it's still workable.

[@oklol496]

if anyone is getting problems adjusting the texture turn on texture lock in the toolbar above

[@theRPGmaster]

Thanks

[@theRPGmaster]

Thanks

[@Osteoja]

You really sound like Mark Felton, you're a great narrator!

[@Tecosaurus]

Wtf. I can not fix the door lineup as mentioned at 0:17 Does it have to be a certain size or something? Please Halp

[@RealSquidicus]

You probably have texture scaling enabled, hover over the button up top and disable it

[@SophieVulpes]

I made a prop_door_rotating but i can just walk right through it

[@mrnicosable]

I love the animations at the end of your tutorials. Keep up the good work =)

[@EmoneyBranch]

I meant vertically lined up, but after making an entity door, I discovered my doorway was too short :P. The entity door comes with a handle as well, so it basically solved all of my door problems. Woo.

[@MellowKil]

Hii , Im new to Hammer. I have tried your TuT, But when i make the door i dont get a single doors but 4 stretch out ones. So when i tried to modify it I just cant get a single good looking door. Anny help?

[@bluein_]

Your door is too big in size.

[@Pepino8A]

Well KZbin recommendations are working great again

[@WarriorofWater1]

awesome, i thought you would never make a new tut! keep them coming, they're great!

[@051elite]

I've noticed most ingame doors have more dynamic handles, meaning the handle turns when the door opens, or just jiggles when it's locked. How do you do this?

[@patrlim]

prop_door_rotating

[@smagti]

i love the ending of your videos... funny .... :) and your tutorials are simple... thanx 3k

[@pipe8248]

how DOES HE ADJUST THE TEXTURE LIKE THAT HOW

[@bushmishmen]

Thanks. The best tutorial I think

[@PlaceNameHeere]

oh god your endings crack me up so much

[@1lucia]

(func_door) Is there anyway to change how far it moves? Thanks.

[@1lucia]

3kliksphilip Oh, that was it! Thank you!

[@BenHybTV]

Good job, all you must know to create a door and which kind of door.

[@Aidan303]

Hey philip, I am creating a massive house, and a lot of the doors are double doors. I use the prop_door_rotating. The doors do not clip into other objects or eachother. During the early stages of development neither would close while another was closed, but could be closed if the other was open. I used the slave property to get them to close at the same time and it worked. However, not all of the double doors (each set has its own seperate names) would work as well. Thanks I hope you can help.

[@whynotll83]

the door in 3:43 ,how can I put it in hl2?and if I get it into hl2 can I make it breakable?

[@crabbyninja]

HL2 didn't have this technology when it was released, so I'm not sure if it's possible.

[@CrabHead501]

you can use the face edit tool to fit the door in!

[@RpgBlasterRpg]

Watch out for the tree 3klikslhilip - 2012 Still wait for 2016 Tutorial hammer editor video

[@Pablito-512]

xd

[@iirovaltonen4258]

2019*

[@QuickNinjaCatTV]

Hey. Is there a way that I can use a button/lever to open a sliding door? It would be appreciated if this comment/problem is solved or if there is a tutorial made.

[@zontiakofficial]

Thank you very much for all of your tutorials :)

[@thep0w3rmachine3]

Super useful. Makes me make good maps!

[@gbrasss]

0:01 down left. damn trees, they're everywhere, kill'em with fire. Btw, do you know where can i download a pine tree model for my map? thx anyway

[@gbrasss]

i tried, but i think a cant use those mdl in the hammer. after that steampipe.

[@gbrasss]

Guilherme Brasiel i dont know how to "add" those models into hammer

[@XavlaminYT]

How can I make the portapotty door work? I can't find any solution for it. I'm talking about the "props\de_vertigo\portapotty01_door.mdl" I'm aware that the "physics" thing isn't checked, but obviously there is a way to make it work, also with the little color thing showing, whether or not someone is hiding in there.

[@Bneboy]

Hey, how do you make a button that when you press, it activates the door? The func_button class doesn't do anything for me, but just vanishes.

[@gabriels.5556]

I'd like to know how to make a prop door that slides upwards. I'm using the survival_garage_door.mdl and I want to make it slide upwards and act as a garage door in my level! Any solutions? Thanks

[@SpannerOfWar]

Watched so much of your tutorials new to mapping. Think you could explain how to place ragdolls and how to animate them like you did.

[@ShortKidRoss]

I made a door with a prop recently, and for some odd reason, when my door was open you couldn't walk though it. but when it was closed, you could walk through it. I ultimately decided not too include doors into my map lol

[@Nvshvil]

how to make a hole in the wall for the door: Place a Block in the wall you want to make a hole in (Make sure you can see the block on both sides) then select the block you just made > goto tools > press carve Creds:Ognjen Trivuncic Ogi

[@aurorafox1283]

Alright, how do i use other props than door to make a door? Im using prop_rotating_door and use a fence door from Half Life 2. But it dont open, yeah it rotates, but the point is that this blue ball thing is in the middle of the prop so it just rotate standing in place, it dont move exaclty like a door. Is it possible to make that moving like a normal door?

[@Mewcat]

Move the blue ball to the side of the door model. Maybe move it a bit up, too?

[@xGrOffical]

so glad to see new tut's.

[@Eric15d]

I have made double doors from two prop_door_rotating but I can only open the first door in one direction and the other in the opposite direction. When one door is open I cant move the other one until I move the opened one again. Is there any way to fix this

[@Huskyx94]

in properties for both doors. Name: Door1a Name: Door1b Now both are named goto one of the properties look for Slave Name if you are in Door1a's properties pick Door1b in there and vise-verse in Door1b's properties

[@MrZoffin]

How can I get the door of the portable potty to NOT rotate around the middle of the portable potty? It doesnt change anything if I move the white circle. Also I cant stay inside the portable potty when the door is moving. There is an invisible wall which pushs me back.

[@GrandmaTuffits]

For some reason when I make a rotating door, I can walk through the door when it's closed, but when I open the door I can't walk through the opening. It's like the door model is at a 90 degree angle with the actual door entity.

[@GrandmaTuffits]

3kliksphilip Sure. docs.google.com/file/d/0B9cBVlC3oT0dRXpTcWI5UGdSWXM/edit For some reason, this happens with EVERY door I make.

[@GrandmaTuffits]

3kliksphilip Alright, I'll try it out. Thanks!

[@Moreno6000]

So what I want to know is why if I select a texture for a door it makes a weird door doesn't show the entire dooor

[@camobunny101]

i kinda got a problem. i was getting a door prop from the world model list and then it froze and the program stopped responding and it closed down. is there any fix for this?

[@magnusmllerknudsen7435]

hey i have some trouble with the prob door, if i want it to switch side what do i do then?

[@Kane34572]

How to do you make a square to put the door in? like i have an empty cube but how do you make a hole in to cube to put a door there??

[@AK3601]

Could you make an tutorial on how to make those swinging-doors that you can either hit, push or use the gravity gun to open. Example: That one gate in the Sewers with a wooden board at Chapter 10: Anticitizen One.

[@bigtryguy]

How would you go about making double doors that both open together, sort of similar to what you'd see at a supermarket?

[@EmoneyBranch]

I can't seem to get the doors lined up right like you did. And apparently HL2 doesn't have door handles?

[@tincan8900]

I don't know if this is still relevant for you, but when I tried it and compiled my map (testing it from Hammer) it automatically put a handle on it. And yes, it's animated so it moves with the door.

[@Inkxo3D]

when i try to open the prop door i just went through it the door didnt open, its like no cliping through a object

[@Kcoolin]

Fantastic tutorial

[@jovanpopovic4306]

when i move object to make texture precise it just puts texture back as it was on start and i cant make door texture ...

[@MrYammygoochy]

I have a slight problem, at 0:25 when you adjust the door. When I try it I can't get rid of the black part of the texture, should I just use the clipping tool to cut it off? Is there something I'm doing wrong?

[@oddnonymousgaming]

Got any tips on making a garage door open and close? I can't recall how to do the tracking on it.

[@rohyp600]

Perhaps it's on purpose, but the subtitles in the video helped a lot and were really accurate, since I don't understand what british people said most of the time. Does he put the subs manually or YT has perfected the captions?

[@eljestLiv]

GUASON manually

[@PigPen910]

What would I do if I were to try and get 2 sliding doors to slide in unison when you activate one.

[@TheNirojl]

im trying to make a door at the beginning of a castle and it's suppost to move like the falling wall at the end. can someone explain this to me or send a link with a tutorial to me? thanks.

[@animationsofgmod7083]

can you make tutorial for prop based doors in portal 2 sdk? because im working on na map and my prop based doors is not working well

[@EliteMon95]

For the last door used, is the dynamic prop even necessary? I thought there was some sort of option in the door properties called "Hardware" that lets you use a handle or a bar.n

[@420Jakal]

I'm curious to know if you have ever done a video about doors that operate with the use of buttons/keypads? I'm also having a hard time making a door operate from a keypad prop. :(

[@gruntsex]

when i click 'browse' for the handle, i cant click on the search bar, or anything in that window

[@gruntsex]

+Hayden L. i rebooted hammer, works now. i hate the only 2 handle models :(

[@abytc2023]

I simply cannot figure out my door problem yet. I have 4 rotating doors on each map, 5 maps total. I can't figure out what it take to make some be open at the start and how that correlates to the side of the bldg orientation-wise w/regards to the door angles. What a headache.

[@Deepsi]

How to make doors which open when pushed by the player and then come back to the original position?

[@GustavoCardoso95]

Great tutorial mate!

[@TheUplinkExperiment]

Can you make a door that you can shoot holes into (Not the Left for dead style) but like the fake DMM video you did but with a door?

[@kulgvyi]

I've been working on a csgo map and have added a prop_door_rotating into my level. It seems you can spam it sending it back and forth without allowing for it to fully open or close. How could you prrevent this?

[@kulgvyi]

Haha. Not sure what I was working on at the time but thanks for the reply :)

[@EdwardosTreehouse]

how would i add glass to the door so when the door opens the glass follows?

[@nogage]

the handle does not appears in the model browser for me. And i have CSGO installed

[@Madness7125]

I'm confused, no matter what I do the only why I can get the door to texture to line up with the block is to have it floating in mid air. If I move the door down to where I want it to sit, the texture gets ruined.

[@shintopriestesskikyou5674]

Um, i tried to adjust the door texture but when i strech it it just changes the texture and then when i put it back i just goes to how it was. How to i fit the texture?

[@Ned478]

same problem here +3kliksphilip

[@shintopriestesskikyou5674]

***** Oh thanks

[@cameronhazlip554]

How do you color a prop_door_rotating ? Like they have in the new nuke.

[@MrYammygoochy]

Yes! Works like a charm now, thanks again!

[@SmolBloof]

I know that you make maps for CS:GO (and used to make maps for CS:S) but is there anyway to use the func_door_analog function for HL2:EP2? It does not seem to have it.

[@thescribe_aqua]

is there a way to include the door hardware also?

[@VicRamone]

My door (prop) has an area where there is needed to have a window, I've made the window as a block and placed it, but I cant find a way to parent them :(

[@supafranc]

well i have a suggestion, there is another type of door that is the breakable doors, the ones used in the oficcial cs go maps such as inferno and nuke, is there a way to make those in sdk?

[@Falador321]

are u redoing all ur tutorials for cs go? lol i always use to watch ur css tuts years ago.

[@smat3907]

+3kliksphilip how you can make door with block tool and parent breakable glass to it? i did go to your parenting tutorial but you showed one door that haved it but didnt show how to do it, help would be nice because its like the only thing i need!

[@baazaouimahdi9390]

hello philip can i make door open automatically when players approch them on sdk hammer ? i will appriciate an answer ^^

[@xerohr]

any way I can lock/unlock it with an item? Making a map for garrys mod.