Ford Explorer Sport Trac: Crank No Start

[@neutrodyne]

What I like about this video is that it is totally honest. It shows the real world with nothing taken out and nothing added in it's just real and no music to take away from it.

[@johnminer1407]

I don't even work on vehicles and love these shows.

[@robertsmith2956]

I like his drives in the country. 1st one since he drove to his brothers diesel truck shop.

[@comingundone27]

Oh man. The autozone rant is priceless!

[@pmgear]

that part cracked me up, man he can do stand-up if he gets bored with fixing cars!

[@blmdh20s]

This is why I try to not go to Autozone. It normally takes 3 round trips for me to get the correct part. This is also why I try to bring in the old part with me .

[@Phantom-darkness]

It’s truth.

[@ModMINI]

I'll go to auto zone but i'll just give them the part number myself and verify the part before I leave. All they do is take the money.

[@rj.parker]

Autozone’s strategy was engineered by the same guy who sunk Sears and KMart, Eddie Lambert, vulture capitalist. Quality and good employees take the rear seat to corporate profits.

[@griffinreitz7041]

My old mentor used to say, " Once you achieve greatness, all that's left is silly mistakes" So there ya are... :) At my age I'm so great I can hardly stand it some days !!!

[@smiles7631]

Around my neck of the woods I have all the auto parts stores within walking distance. I'm a Die Hard Rock Auto guy now but I used to go to these guys and just prayed I got someone with a brain. It was 50/50 every time. Always take all the info and the old part or you'll be back lol. Great video as always!

[@rrmech11]

You blow every mechanic outta the water. Eric

[@kellytaylor3134]

Richard Gill without a doubt he's spot on

[@jimwest986]

u could have ck the bolt size on the new balancer

[@Yo-in8ep]

You hear a lil sucky sucky lol

[@johnadams3152]

Eric you didn't see that clip on the air filter housing wasn't clipped on all the way. Another good video.

[@hotpackjay]

I just wasted a whole day at work.. tried three different puller kits just for you to show me the rod and the small hole to push against the crank.. thanks bro now I’m gonna get it done in the morning

[@williamsorrels]

Eric re:worry about the radiator. 65 years ago, I hated busting my knuckles on the steel fins. So I just use a 6mm or 1/4" peice of plexiglass or 1/4" plywood and put in between the radiator and my work area. Helped preventing tools puncturing the radiator too.

[@konstantinusstoyanov9749]

It's so hard talking, working and filming, that's a hell of skilled guy

[@mr.r9505]

Man you're the best diagnostician I've seen in a while don't beat yourself up you did great.

[@markferrick10]

Nice job. You did spot the issue, just took a few seconds. Many would not see it at all. Going in on a Saturday evening, remember that when looking back in your life, no one ever said " I wish I worked more".

[@timbuck2505]

You forgot to do your daily affirmations in front of the mirror today Eric... I'm Good Enough, I'm Smart Enough, and Doggone It, 115 K People Like Me! Don't be so down on yourself. Excellent job!

[@SchulzChris]

Auto Zone, I've helped more people there than the people behind the counter. And I'm no mechanic I just play one on KZbin. Nice job Eric

[@michaelferik8060]

Turned on the TV, nothing but trash as usual. Fortunately SMA came to the rescue on a Saturday night. Thanks Eric!

[@crisprtalk6963]

"The three strings he knows how to play on the guitar"!! Man I loved that.

[@paulwright3261]

Don't beat yourself up Eric! You're a great mechanic! We're all human! We all really enjoy your videos! Keep on trucking!

[@clarity421]

I'm ten minutes into the video and I'm giving you a thumbs up for being honest enough to show us your oops. :)

[@Eastmead]

That is why you channel is always attracting new viewers - nothing hidden and being human, and a great family of course

[@thesteaktc]

Eric is so enthusiastic that's what makes it good to watch

[@swanie_6448]

Man... Dont be so hard on yourself....!! Everyone makes mistakes, especially when the obvious slaps us across our face...!! No one thinks any less of you. You are the man...!!

[@aaronledford4070]

Kudos for not just editing your mistakes out of the video. I didn't notice either in your defense

[@randytheapplianceguy8838]

I don't work Saturdays anyone. And don't be hard on yourself. I think this is one of my favorite TV shows you've done. :)

[@davjociestanski5743]

This is a true day that people have in shops Eric thank you for showing a bad day that we have at times

[@jimzivny1554]

Good video! In 40 yrs of wrenchin' I've never seen a belt make such deep grooves on its own, the damper must be Chineseium metal. Don't worry about small mistakes, you married Mrs O! You did good!

[@Taldish]

Nothing to be ashamed of here, Mr. O. Real nice job.

[@robertsmith2956]

Mrs O wasn't there to see it, So it never happened.....

[@generaldisarray]

Love the fact that you don't hide your mistakes, well done!!!

[@jackbommarito7678]

Quit beating yourself up Eric ! You are an EXCELLENT mechanic / technician . I've been in the game for 40 years and have made umpteen mistakes , misdiagnosed , created mountains from molehills … Even breaking a bolt off on a so called " simple " repair can lead to disaster . As for as the " Twilight Zone " , God help one dealing with them . I enjoy your videos and have learned so much . Wrench on Brother !

[@precisioncueservice6355]

I like how you can visually date the SMA videos by observing the deterioration of Eric's Jeep hat;)

[@jcrdesigns719]

The auto zone Rant left me in tears. I had to share it with my wife

[@chrisclark6044]

Thumbs down and loss of respect? Naw, the fact you caught it and was able to accept responsibility for missing it. That in itself speaks volumes on you as a technician and man. Definitely will continue following you Sir.

[@medtec6747]

I love that you goofed up a bit but didn't edit it out. You're an honest man

[@jcfornow]

This is the first SMA video I have watched or stumbled upon and by the end I was thinking, man I just LIKE this guy!

[@expertmax32]

Do you have a pulse? Yes? You're hired!!!

[@SouthMainAuto]

Oh you had an interview I assume haha!

[@TheJosh10304]

So damn funny! I wish I could have heard the interaction in the store

[@guyazbell8169]

Maxime Clermont sounds like a swift driver application to me.

[@harveysmith100]

Put a mirror under the kid's nose, if it fogs over, hire him!

[@superstreet65]

LOL

[@bigrockk2980]

Are you kidding me, that’s what I love about your channel, you keep it real! I don’t think there is a person out there that couldn’t have easily made the same little oops, no big deal. Eric you have taught me a lot and it’s appreciated! Back in the day I did all of my own auto repairs because I couldn’t afford not to but cars were a lot simpler back when. No internet then so the library was my source for info. Now I do some but not all of my own repairs. Before I started watching your channel I thought I had pretty good auto repair knowledge, lol, wrong, not even close, things have changed so much over the years and I was stuck in the past but I’m slowly catching up again, thanks!

[@ricrobinson9965]

Never met a perfect person. But have met a few that thought they were. Love that you are human like most of us! Merry Christmas!

[@rolandcollins1427]

a real mechanic that's what they used to call me until they woke up you don't have a problem there THANK YOU

[@38911bytefree]

Dorman crank pulley: " See you next week Ford !!!" LOL. GREAT VID. Love the rant about the application process at autozone .... the times you get SALTY ... YEAHHHH.

[@bazelgrimaldi5676]

I keep watching because what you do is real. You address problems pragmatically, you never scrimp on the extra work to do things right. Just a shade tree mechanic here in Arkansas but I love your videos. Keep on with it bro

[@u1richh]

Correction: The Auto Zone application process involves 3 questions: Do we sell performance parts, is blinker fluid real, and do we know what we're doing. If the answers are yes, yes, and no, you get hired.

[@JustAnotherJarhead]

visine is technically blinker fluid... if you were a young Marine mechanic.

[@welshpete12]

You pay peanuts , you get monkeys !

[@agonleed3841]

@@JustAnotherJarhead this is true.

[@craigtaylor6708]

Get it off your chest it's good to vent off

[@CitizenPerkins]

🤣🤣🤣

[@gordonforsness6194]

I am an old school shade tree mechanic who finds why the high tech mechanics cant fix a problem and starts changing parts till the customer gives up and sells it to me or asks if I can help Thank you for your honesty and integrity, you proved to me that not all shops are inept.

[@hasenbinlaid6379]

You must be human With all their flaws and emotion Most important trait of a mechanic is honesty. Great video

[@vodka291]

Wandered across your show a few months ago, I find my self enjoying what you represent. Thanks.

[@Javelin3o4]

I got a job at Kragen (a.k.a Kragen/Checker/Schucks, which is now O'reilly) back when I was a teenager and you had to answer multiple choice questions on a computer when you were applying, stuff like "if the customer said they had water on the passenger side floor board what could be the issue". I'm sure at autozone its probably more or less the same thing the but the answer for all questions is "replace the O2 sensor".

[@ModMINI]

I honestly doubt if there would be any questions these days about actual cars, other than the top three auto related things they do. Change windshield wiper blades, Change batteries, read OBD codes. Their main jobs these days are cashier, stock boy, janitor.

[@garyjones7044]

@@ModMINI I'm in AutoZone at least 3 times a week and most of the time I have to waght at the parts counter so I don't know what your talking about

[@mikewilson8594]

I've been a Master mechanic for over 30 years. I bought a brand new 2005 Sport Trac 4.0L from the dealer off the showroom floor. After about a hundred and ten thousand miles, I had weird issues. Let's just leave it at weird issues! After about a week of sweating the diagnostics and scratching my head that very same issue finally smacked me in the face. Don't sweat it brother, it's one of those one-in-a-million issues unique to the vehicle and/or engine combination.

[@lowlifeangler]

It's a Ford LoL. Sorry I heard Ford Fusions don't go to repair shops , those are really good vehicles. But I can't talk, I'm always working on my 2007 Malibu LoL

[@DoubleE-2250]

6-year old Eric O video is still a blast to watch. I'm glad this is still posted.

[@rogerintx1]

Autozone is the place when everything else is closed & you "might" find the part at twice the cost. This happened to my Ranger; belt squeaking, changed pulleys, tensioners, and a bad alternator and squeak continued. Not until I got under the truck and inspected the harmonic balancer and found what appeared to be a "two" pully system. Sure enough I was dumbfounded when I took it off and looked similar to one on your video. It's a miracle that that belt did not come off and tangle itself on the fan. Good video and thanks for sharing.

[@jmew1922]

Im glad that someone else misses things when its right in front of you

[@EthanBradshaw]

Tried getting a job at Autozone once. I interviewed with the assistant manager and he seemed visibly threatened by my experience working in an actual shop, since he told me he never so much worked at a quick oil change joint. So, I didn't get hired. No biggie. A few weeks later I went in to pick up some sway bar links that I had set aside and I found that the kid that they hired instead of me was the one "helping me". He didn't even know what sway bar links were and insisted that no such thing exists and it turned into a 15 minute fiasco with the assistant manager that hired this idiot over me just to get some damn bushings that were literally sitting in a box on the back counter. What a joke. A few years late commenting on this vid but hey I hope you get a good laugh out of my struggles 😂

[@ayymarley3767]

That shit always happen , they always hire ppl with no car experience

[@Trucker-Belly]

@@ayymarley3767 EOE...

[@dukeman7595]

The guy was afraid you would have his job, so, for job security's sake he didn't hire you. Always hire someone dummer than yourself if you work for a company.

[@jdrs4214]

Everyone has car experience. Driving a car; that is. I believe the term or terms your looking for is “automotive service experience.” Or “gear head experience.”

[@Those_Weirdos]

@@jdrs4214 No, not all people drive.

[@bborkzilla]

Autozone can be like RadioShack used to be - "You have questions. We have blank stares."

[@Patrick94GSR]

Autozone was actually called AutoShack in the 80's, until they got slapped with a copyright infringement lawsuit from RadioShack. lol

[@JosephQPublic]

I miss RadioShack

[@AmandaHugenkiss2915]

@@JosephQPublic me too

[@Gruin]

RadioShack is still here, But the knowledge left.

[@stevens862]

Eric O you are just HUMAN, a lot of people would have missed it at first! However on the second look you nailed it and laughed, anyone being truthful would agree that they have made a obvious mistake. It’s funny that my son mr PhD was driving with his windows down and decided to spit out the window at 55+ MPH and of course it came back in the window. HaHa, a very bright teenager at the time, all he could do was laugh about it. I like your channel and will continue to watch and learn from you. I have always been a good mechanic but was slow at diagnosing electrical and sensor problems. I have learned so much from you keep doing what you do best.

[@frankd.brennan6520]

I've learned a lot since you tube came out and I can't believe all of the years that I turned a wrench that I never had a garage or power tools and I've noticed from watching you that you use them wisely. Some of the guys just start buzzing the bolts right in. Its a great feeling to know that there are good mechanics still out there, but not that many. You should have used one of the kids to help you on just the fan to see what dad has to do every day

[@nothanksguy]

Whenever i pull a fan, i put cardboard between it and the radiator if theres room

[@SeventyEightCivic]

me too, it is cheap insurance.

[@Joshoptimus]

Love, loved ! ! the night ride in upstate Ny. I don't think you have anything to be sorry for Eric. These videos are all lessons learned by our great educator. Lol THANKS SMA ! ! !👍👊💪

[@majorret3104]

The description of your experience at AutoZone was great!!!! Love your channel.

[@davidp2of3]

Eric, please don't be so hard on yourself. You're an amazing diagnostician. You're wrong, you're ethics are a great reason to watch your channel

[@charlestredway8253]

Watching all of your videos helps me know which car manufacturers are terrible at engineering access to repair what needs to be repaired.

[@aussiefirestorm]

Thanks for showing that you are a normal human too. I had a very similar whoopsie the other day, car came in for a roadworthy found A/C belt shredded and a rub mark on timing cover. I did not think about it just told him to come back for some new belts, fitted the belts started up and knock knock goes the 2 piece balancer, DOH. Subaru told him about the balancer at last service.......

[@ApexHotShot]

The real tip here is not the head fake by the harmonic balancer. It is that you made those threaded rods at various lengths with the one end squared off (for the socket?) and you knew they could help get that puller working. Awesome insight and ingenuity. ( A trick from meemaw? ). Great video Eric.

[@mikevonkleist6767]

Keep going. What you do for us is amazing. We love what we do but sometimes we forget why we do it. Eric reminds us why we love doing this.

[@davewhite9794]

You have no idea how great a service that you provide to us in the KZbin community. I have a Ranger that quit while I was driving. I was thoroughly confused as I saw my coolant temperature climbing so high I was going to pull over. Before I did I saw the temperature fall back to normal. Continued driving and later the temperature shot up again. The engine shuddered slightly with spark knock (?) then quit. Internet searches resulted in my believing that it was a cracked head. After viewing this video I looked at the balancer and found chunks of rubber broken around the balancer. Just ordered the balancer and seal. You are a life saver.

[@mrnimeh]

Mr. O You are not an idiot, It happens to the best of Us. YOu are a great teacher of mechanics. Do not belittle yourself.

[@notxarb21]

Eric, all you have done is prove that you're actually human... when I watch some of your videos, you seem to be more than that! I've been in the parts end of the business for many years-- everything from Mom and Pop stores to dealerships starting when I was 17. One of the toughest things when you're young in the parts business is dealing with the oldtimers who think that just because you're young, you don't know anything. I used to love to prove them wrong, but the one thing I always did was treat them with respect! In my later years (I'm now retired), I would be working alongside of the "whippersnappers" who thought they knew everything, and would be gratified to see the oldtimers turn down assistance from the young'uns to wait for me to help them. Keep up the good work... I enjoy your videos!

[@timgraham7851]

The only mistake was going to Auto Zone.

[@angryfrigginliberalinpenns1314]

Vato zone

[@CSX4772]

There is an Autozone just down the street. There is an older gentleman that knows his stuff. So, it really comes down to who is at the shop. And whether or not they give a damn. The 2 kids at the autozone you visited clearly didn't care.

[@emmilitia4241]

Napa is my choice, although I do have AutoZone not to far.

[@tomasmorales286]

2007 nissan pehifanderq

[@fewestbark970gaming2]

Quite going there after I went there for I belt I needed and they were the only place open at the time so I kinda had no choice but long rant short it took me 12hr and 8 belts to finally go over to advance where they gave me a good belt the first time and correct belt!

[@donbailor308]

Show me someone who never makes a mistake and I'll show you someone who never does anything.

[@ellobo8593]

Don Bailor, you've meet Mrs. Lobo? 😂

[@johnnyrussell4050]

Dan I have a 02 ford explorer sports track just went hay wired I had it checked out and then the codes showed po102 and 113 and 122 and 1504 first one is low input next one high input next one low input can you please help me get my truck fixed?

[@danrandle65]

it looked like two pullys to me to, but hey the main thing is you did notice it before getting to far into it, great save if you ask me🖒

[@buffuniballer]

It's one thing to make a mistake. It's another to just not give a rip about your work. Eric O makes mistakes, and owns them. The "Zone" guys just don't give a rip. Don't know which you are writing about, so I thought I'd just cover them both. Or maybe you meant something completely different?

[@brianglade848]

My turd is a banana

[@denismikulicin3433]

Don’t worry about any negative comments Eric I think you’re a great mechanic, you’re a real character & you make me laugh as well.

[@riverraisin1]

You get an immediate thumbs up from me because you are an honest mechanic that owns his mistakes. No arrogance at all. I would go to you without hesitation.

[@TheWoodman064]

I so enjoy watching you do your magic! Awesome technician! Eric O!

[@ericsissons8138]

Mother, son of a monkey. Epic, truly epic. Good video. If rather see your mistakes than an "I'm God's gift to mechanicing" tutorial.

[@richardgray8546]

I enjoyed those videos anyway what's the name of scan tool is it one of the best

[@adventureoflinkmk2]

What the thunder lol

[@bobbylong4443]

😂😂😂😂😂🤪life goes on. You are a great person keep smiling 😃

[@tigermoth3194]

That's it !!, Doctor 'O - Its time to for you to hang up your spanners (or wrenches in the USA) and swap places with Mrs 'O and see how ya get on in the office answering the phone and making lunch. But seriously though, Its great that you're willing to show your mistakes too. Big thumbs up from me :)

[@steveb2088]

You're videos are the most fun to watch ,combined with Personality, realistic love how you don't try to hide anything show it all!

[@ChadUSMC1992]

Don’t worry about hater comments. You are the man.! I have been trying to understand why my explorer 4.0 squeals. It confused the shit out of me why there were two pulleys on the crankshaft.

[@jimenezll803]

E.O. your the man! If there were more shops like yours, I would would trust them with my vehicle anytime and never complain. Keep on trucking and do not be so hard on yourself, let us not so know it alls do that..LOL!

[@richardbambenek2601]

You will NEVER get a thumbs down from me ever. It is now midnight, I've watched my goodnight video and now I can go to bed. Thanks.

[@j.rayredden1528]

Dammit...you cannot be makin these mistakes, Mr.O!!! It makes you look, well, human!

[@burntkorn]

You are no doubt one of the best mechanics out there and believe me they are hard to find. Great sense of humor you have as well..I truly enjoy watching your videos!

[@steveherring6660]

take it easy dr O we all have bad days. your still one great auto tech guy.

[@tremblingone4269]

Thanks for taking us with you on the road trip to get parts, that's half the fun! This is one of your best videos yet. - I liked it so much I finally subscribed, not because of your embarrassment but what you experienced is typical in my line of work. Often what I "think" I see on initial inspection is not what's really there. Good job Eric!

[@cookie9589]

I went to autozone in Fairfield, CA with an ALTERNATOR. “Hey bro you wanna test that starter?”

[@crisprtalk6963]

nice!

[@algarinthompson8749]

WOW

[@seeya205]

Just tonight, I asked for a fuel line release tool. He asked me if that was some kind of socket.

[@BernardBethea6339]

You bull shitting right

[@Etiker5]

After all the videos I've watched I finally heard Eric use a cuss word, even though he censored it... (tsk tsk) It makes me feel better. Thanks Eric you da man love your channel!

[@richodude2679]

Astropunch I suspect Eric O can swear like a trouper , but he is an expert at holding it in while making the videos

[@adamburton4798]

Don't be so hard on yourself we all make mistakes and from a lot of the videos I watch of yours, you are constantly fixing others mistakes

[@williammalenfant4864]

Eric you are the best. Admitting your oversight is proof that you are a great mechanic and human besides.😂😂😂😂

[@Colrad67]

Dude, you had me in stitches! I'm glad you made and showed your video. You're the man!

[@zombietherapy1759]

Cat's out of the bag, machining with a serpentine belt. Selling my machine shop tomorrow!

[@throttlebottle5906]

:))

[@znarcuss]

now that what you call an engine lathe

[@robertsmith2956]

Another reason not to get an electric car. LOL

[@jimmacris615]

Most likely Mrs. “O” would have noticed the bad pulley. - lol. Great job - we’re all human and the the car now starts.

[@rogereastman3187]

That being said...I've learned through the years, that the best indication that a person is worthwhile and valuable is: When they can easily make fun of themselves openly. That's the reason you have the best mechanic show on the net....keep up the great work, and thanks for all you do making these videos for us 👍👍👍

[@groovymoon]

I drive by your shop a few times a year. My mom lives in East Meredith near Oneonta. Need to stop in and thank you for all the inspiration.

[@spectrexiii5529]

The AutoZone rant I was dying man hahahaha Fog up the mirror, great one!

[@spiritualawake2984]

Autozone is the most by gawd awful parts on the face of the earth. I don't know how that place is still in business

[@cjkent3300]

I agree you didn't spot the pulley the first time. So, you did the next look, good job. Autozone is a no-go zone. I have all the auto part stores around me. The only one I will use if I must is Advance because of the online codes.

[@Zib187]

You asked what it takes to get a job at Auto Zone, well I can tell you because I just started a 2nd job there earlier this month so that I can pay my wife's & daughter's doctor bills thanks to Obamacare. I have no auto experience other that working on my own & friends cars since I was a teenager. You are spot on when you mentioned the check box for a pause. AZ is hard up for workers because they currently have over 10,000 job openings in the US. When you called AZ they should have taken your number so that they could put the part on hold for you. If they gave you a hard time about the tax exempt claim then they most likely were a DIY store & not a commercial store. The commercial stores are the ones that handle selling to the local shops. I work at a DIY only store so I deal with idiot customers most of the time & 98.5% of the time they buy the Dorman or Valuecrap branded parts.

[@wildbill23c]

I bought a set of valuecrap spark plug wires for my truck the other day...why? Because the over-priced set was garbage, intermittent no-spark on random cylinders and after jiggling around the plug wires it would work fine for a bit then start missing again...brand new engine and wasn't running on all 6 cylinders again...out came the ole brain and said well its gotta be the plug wires since when you move the wires around it starts missing/hitting. So to the parts store I went for the $20 plug wire set, 10 minutes problem solved. Just because you pay more doesn't necessarily mean you get a better product sometimes. I know that's often not the case but seems to be with already over-priced re-manufactured junk parts from these parts stores. I seem to have better luck pulling parts off vehicles at the Pick A Part lots HAHA!!.

[@patrickskaggs6034]

Nobody is perfect. Everyone is not perfect and if they say they are they are liars. Keep on doing what you are doing even at your worst day your alot better then many so called mechanic. So keep up the good work

[@RonnieTarr-y5w]

We all have over looked things at times but that’s where determination comes in and preavious situations reminds us to take another look. Thanks for the video,don’t knock yourself up over it after all we are humans.

[@adammays9531]

By far the most informative and honest mechanic on KZbin I’ve seen. Keep up the good work

[@allenstautz9506]

Always appreciate your humbleness! Yes, we do make mistakes, but the professional part of making them is to admit with confidence.

[@AnhYeuEmMaiMai69]

don't feel bad Eric, I've made worse mistakes lol. As usual very entertaining to watch you and very educational. Keep up the awesome work. To answer your question I do work every third Saturday, including this one...

[@BoweryPenguin8]

Eric O, you saved my tail. Was chasing a bad fuel pump on a 04 sport trac. Diaged a bad fuel rail pressure sensor. Truck ran but rough. I noted a loud belt squeal on startup. Got it running then gave her the beans then it sputtered and died. Chased back to no spark. Then I remembered this video from a while back. I went back to my original thought, loud belt squeak on startup. Then it lead me to looking at the balancer. Oh it’s got 2 pulleys, you can barely see it from the top. It all looked good. Then I had a buddy crank it. Pulleys we’re straight even the 2nd one? Wait this shouldn’t have a second one I thought lol. Went underneath and the crank sensor had a good ole cut in the side of it and the balancer “pulleys” should have been one. Crazy diag!

[@thomasvlaskampiii6850]

Ya know, I'm not gonna give you a thumbs down for making a mistake like that. We're all human. We make mistakes. Seriously though, thank you for leaving your mistake in the video. Shows honesty and character

[@willgeorgiadis6472]

Hope I can be as good as you someday. Been watching your videos for a while and as a newer tech I try to be as honest and thorough as you. Thanks for the great content!

[@nissandudeful]

Hurrying on a Saturday night .... We've all been there Eric.

[@tnt-lu4ue]

were all human ,we all make mistakes. allways looking foward to your live chats and vids !!

[@mgherter]

The nirvana rant and a red green show reference...everything else in incidental. Keep your stick on the ice, Mr O.

[@shadetreemech290]

I used to be one of those pimpley faced kids behind the counter of an auto parts store. I learned a lot.