The Who - Won't Get Fooled Again (Organ / synth part cover - Roland JD-Xi)

  Рет қаралды 39,639

Spacemartini

Spacemartini

Күн бұрын

Пікірлер: 131
@roseadams5362
@roseadams5362 2 ай бұрын
Going to teach myself this. It's a must!!
@muckybobbies
@muckybobbies 4 жыл бұрын
For some unknown reason this makes me dream of the 1970's and being a kid again with my late brother. We often fought like cat and dog, but there were times when we would have done anything for each other. It moves me to tears, but it's brilliant, thank you.
@moosey62
@moosey62 6 ай бұрын
That's beautiful mate x
@Roystreatham
@Roystreatham 2 ай бұрын
Wow what a heartfelt comment mate! It's brought tears to my eyes x
@muckybobbies
@muckybobbies 2 ай бұрын
@@Roystreatham It's nice to slip back into the 1970's and just be there again, back with my brother, all those years ago, even for just a moment...
@tlshd957
@tlshd957 4 жыл бұрын
This is quite good. I'm a musician and a big fan of The Who. Considering what Pete did to create the original, this is actually as close as I think you could get. Well done!
@Spacemartini
@Spacemartini 4 жыл бұрын
Thanks so much! Usually when I hear people attempting this sound the pulsating sound is a bit too short. I had the same problem with all the gear I tried to create this sound. With the JD-Xi the sound decays just the right way thanks to slicer effect algorithm.
@maxromero23
@maxromero23 5 жыл бұрын
YEEEEEEAAAAAAAAAAHHHHH!!!!
@mick9156
@mick9156 4 жыл бұрын
Meet the new boss, same as the old boss.
@shaul67
@shaul67 Жыл бұрын
Just freaking awesome
@jumpstar9000
@jumpstar9000 Ай бұрын
Very nice work! ❤
@dannon2010
@dannon2010 5 жыл бұрын
Thats damn close...very nice
@raylouis
@raylouis 4 жыл бұрын
I keep waiting for the DRUMS kick in.
@Spacemartini
@Spacemartini 4 жыл бұрын
Check out here: kzbin.info/www/bejne/bYmTgZuwqtl9rK8 😎
@lookmanostrings
@lookmanostrings 2 жыл бұрын
I'm sitting here ready with my A power chord ready to go lol
@billadams3469
@billadams3469 4 жыл бұрын
Really nice job. Wish one of my boards had an arpeggiator. You nailed it!!
@Spacemartini
@Spacemartini 4 жыл бұрын
Thanks alot! Actually it's the slicer effect on the synth that is the essence on this one. This sound does not require arpeggiator at all. Pete probably used a square wave LFO to control the volume on the pulsating rhythm. I haven't been able to this well on any other synth mainly because square LFO usually cuts the ending of the sound too harshly. On the JD-Xi the slicer effect with the right variation left the right amount on tail to the sound. What an awesome synth! What boards do you have?
@ian_b
@ian_b 2 жыл бұрын
@@Spacemartini I saw a video of him demonstrating his setup and IIRC it was an organ fed through an ARP modular system.
@stephencurtis9044
@stephencurtis9044 9 ай бұрын
"out where the busses dont run" 😊
@ibnufasya6408
@ibnufasya6408 Жыл бұрын
i can see my band using this as a backing track when covering this song, this could be useful, good job!
@Spacemartini
@Spacemartini Жыл бұрын
Go ahead 👍🏻
@greatunz67
@greatunz67 Жыл бұрын
or just get the actual real split tracks of the original version which are available quite easy to find, they've been included on some of their deluxe cd's on the bonus discs before.
@ibnufasya6408
@ibnufasya6408 Жыл бұрын
@@greatunz67 do you know one uploaded on KZbin? i would really appreciate it if you know one thx!
@ibnufasya6408
@ibnufasya6408 Жыл бұрын
@@greatunz67 do you know one uploaded on KZbin? i would really appreciate it if you know one thx!
@robertrusnak620
@robertrusnak620 11 ай бұрын
Damn close! Great job!
@moosey62
@moosey62 6 ай бұрын
That is brilliant Thanks xxx
@ARCE_ANGELS-en4pg
@ARCE_ANGELS-en4pg 8 ай бұрын
this is so good ROCK ON!!🤟
@OscarFigueroaGycch
@OscarFigueroaGycch 5 жыл бұрын
Perfect
@dannon2010
@dannon2010 4 жыл бұрын
Damn freaking close. Good job.
@dannon2010
@dannon2010 4 жыл бұрын
Ha! I already commented on this...8 months ago. I need a life.
@Spacemartini
@Spacemartini 4 жыл бұрын
@@dannon2010 Appreciate it! Every comment is valuable 😎
@GabrielHightowercig
@GabrielHightowercig 5 жыл бұрын
Excelsior!
@jmacc9876
@jmacc9876 4 жыл бұрын
So good.
@5.7bethesda
@5.7bethesda 5 жыл бұрын
Sooo close... except too much reverb. Take that away and its pretty much IDENTICAL. Great work.
@TheLonePiper
@TheLonePiper 4 жыл бұрын
Actually, there on Pete's version, there is no reverb on the right channel, but almost all reverb on the left (where the parting is). Here's the way I recorded it ... kzbin.info/www/bejne/rl7NmoumiJdlqck
@5.7bethesda
@5.7bethesda 4 жыл бұрын
@@TheLonePiper Really? Didn't know that! Ya learn something new everyday.
@TheLonePiper
@TheLonePiper 4 жыл бұрын
@@5.7bethesda ... two words: headphones!
@VicinalElk44104
@VicinalElk44104 2 жыл бұрын
@@TheLonePiper that... that's one word... you know what, never mind...
@TheLonePiper
@TheLonePiper 2 жыл бұрын
@@VicinalElk44104 Two words: Exactly!
@thestraniero
@thestraniero 4 жыл бұрын
Really nice! Compliments! I think I'm going to try to use it with my one man band (I've never used a backing track in 31 years of doing this). If I get it to work I'll send you a link and give credit. Rock on...
@Spacemartini
@Spacemartini 4 жыл бұрын
Awesome, go ahead!
@Allbbrz
@Allbbrz Жыл бұрын
Sounds great ! Quite impressive. Pete would have died for a machine like this in his time :-)
@modellboy
@modellboy 3 жыл бұрын
Awsome job :)
@62Tomate
@62Tomate 2 жыл бұрын
Bravo!!!
@bodybuilding7801
@bodybuilding7801 Жыл бұрын
Can’t find the version where you explain the settings. It was a great tutorial. PLS make available again. Regards😎
@Spacemartini
@Spacemartini Жыл бұрын
Never done that, sorry
@blaster3744
@blaster3744 Жыл бұрын
Good job ❤
@p47paul
@p47paul 5 жыл бұрын
Well done!
@nsera9462
@nsera9462 5 жыл бұрын
I like the sound you are getting from the JDXi
@poucxs9246
@poucxs9246 Жыл бұрын
The filter made me think that you had flies flying around everywhere.
@pukeschannel6882
@pukeschannel6882 Жыл бұрын
Keep working on it. You'll get it perfect sooner or later. WE used to do this as a cover,..in the early 80s,. I think it took quite a few months to get it....especially the last part of the song. I think I wore a cassette player out going over and over note by note trying to figure out the notes. WE now know he just played the chords and his synth actually changed it to stacatto notes. Back then we had to play it chord by chord. I think you did better than most of the idiots nowadays trying hard. A few of the "known" big bands have tried to cover it,....and it's embarrasing to even watch them. They are not even remotely close.
@rodrigotudancafernandez17
@rodrigotudancafernandez17 5 жыл бұрын
Wow that's super nice. Subbed
@Spacemartini
@Spacemartini 5 жыл бұрын
Thanks man!
@p47paul
@p47paul 5 жыл бұрын
Would you mind if I used your Synth Track in my cover version of this tune? And of course I would give you credit. And of course all for fun. I have a home studio, drums, guitars, bass, Hammond, and all me. I could never figure out how to get this synth sound and also the keys before the drum solo. I am so impressed with what you did here.
@Spacemartini
@Spacemartini 5 жыл бұрын
Thanks for the compliments! Using the synth track is ok by me 👍 Would be awesome to hear other takes on this epic track! Here's my full band version: kzbin.info/www/bejne/bYmTgZuwqtl9rK8
@jeannickmahiet504
@jeannickmahiet504 9 ай бұрын
Superbe.....
@jasonmyers479
@jasonmyers479 2 жыл бұрын
Could you please help me with the settings? I bought this synth because of this video. I would be happy to pay you. I would rather spend money than weeks or months trying to figure it out. I have the tone but still don't know how to get the flange/phase effect over the tone
@Spacemartini
@Spacemartini 2 жыл бұрын
Hi Jason! Really appreciate the fact I inspired you to get the synth. I found a way with the JD-Xi manager to get .sys-files from the patch and the effect chain so it could be do-able. Email me haahokas@gmail.com and let's discuss more :)
@blaster3744
@blaster3744 Жыл бұрын
i wished The WHO would play that long
@RobertFelix-fq2xt
@RobertFelix-fq2xt 8 ай бұрын
Could you please let me know the settings for the - ROLAND JD-XI.
@feelmywrath8241
@feelmywrath8241 2 жыл бұрын
YEEEAAAHHHH
@mr.c8033
@mr.c8033 7 ай бұрын
Hold on. Wait...It's Pete. He called. Said, are you available this summer?
@Spacemartini
@Spacemartini 7 ай бұрын
Haha, I am 👍🏻
@brookt3497
@brookt3497 Жыл бұрын
Fantastic effort! Well done! Have you done one for Baba O'Riley?
@Spacemartini
@Spacemartini Жыл бұрын
Thanks! I have: kzbin.info/www/bejne/p5DboZyXmdGhmaMsi=Nn9TlcxcREr3zt8C
@AWDlyFunny
@AWDlyFunny Жыл бұрын
I'm doing a comedy sketch based on CSI Miami. Can I use this for the background? I will give you credit in the description along with a link back
@Spacemartini
@Spacemartini Жыл бұрын
For sure 👍🏻
@AWDlyFunny
@AWDlyFunny Жыл бұрын
@@Spacemartini thank you! I will send you a link to the sketch series we're using it for later.
@Spacemartini
@Spacemartini Жыл бұрын
@@AWDlyFunny awesome 😎
@ZingsVideos
@ZingsVideos Жыл бұрын
10 hours, please.
@themoochman3867
@themoochman3867 3 жыл бұрын
Do you have some sort of sheet music or anything to go by for this? It seems really cool and I wanna learn it
@Spacemartini
@Spacemartini 3 жыл бұрын
Sorry, but no. Played by ear.
@themoochman3867
@themoochman3867 3 жыл бұрын
@@Spacemartini Damn :( but that's actually really cool that you could do that, my ear sucks lmao
@ellenbacklin
@ellenbacklin 4 жыл бұрын
I have a korg r3 with vocoder and yamaha dx230. Can I do a repeat on either one if these and also a split on the Yamaha
@amradio557
@amradio557 3 жыл бұрын
Really inspired by your video. I just ordered a used Roland JD-XI (with no manual) to duplicate what you have done on yours. Any hints/help to make it easier for a non-SYNTH person who plays just a little bit of keyboard on a few choice songs my band performs
@Spacemartini
@Spacemartini 3 жыл бұрын
Awesome, JD-XI is so good synth! For a non synth player i'd say start with the real time controllers and effects and figure out what they do to your sound. The analog part is an excellent playground to get into synthesis 👍
@amradio557
@amradio557 3 жыл бұрын
@Spacemartini So to get the We Dont Get Fooled Again "sound" I see 70s organ. and the "on" lights on the Roland are: Octave UP. Digital Synth. Keyboard. Cutoff LPF. Rate Pitch. Effects 1-Compressor. Effects 2-Slicer. Delay. Reverb. If I turn all that on and make adjustments will I be close...or is there some hidden menus/settings deep in the synth that I need to dig up a manual off the internet. Thanks for the help. Paul
@Spacemartini
@Spacemartini 3 жыл бұрын
@@amradio557 The slicer effect was the key feature on this one. You'd have to change the slicer variaton in the menu. That was probably the only menu diving feature on this patch.
@tpxchallenger
@tpxchallenger 3 жыл бұрын
Fantaaaaaaastic!! Great trick for the tremelo. Any chance you'd take a shot at Baba O'Riley?
@germanshepherdlover2613
@germanshepherdlover2613 Жыл бұрын
Could i get my Roland RD-88 to do this? I am trying to get it on my Nord lead but not much luck
@Spacemartini
@Spacemartini Жыл бұрын
Unfortunately not. The Zen Core sound engine does not have the same slicer effect algorithm as the JD-Xi.
@Xanaduum
@Xanaduum 5 ай бұрын
Going to try this next time I get the jdxi out, what arp setting are you using?
@Spacemartini
@Spacemartini 5 ай бұрын
@@Xanaduum it is not using the arpeggiator. The pulsating effect comes from Slicer. Think it was variaton 2 (change that from the menu) that does just the right effect.
@tpxchallenger
@tpxchallenger 3 жыл бұрын
Fantaaaaaaastic!! Great trick for the tremelo. Any chance you'd take a shot at Baba O'Riley?
@Spacemartini
@Spacemartini 3 жыл бұрын
Here you go 😎 kzbin.info/www/bejne/p5DboZyXmdGhmaM
@tpxchallenger
@tpxchallenger 3 жыл бұрын
@@Spacemartini Righteous!!
@danielmiddleman8613
@danielmiddleman8613 7 ай бұрын
Can it do ARP sounds like Sister Disco?
@Spacemartini
@Spacemartini 7 ай бұрын
Yes, it does arpeggiator and easy to use step editor. Think it could nicely do Sister Disco 👍🏻
@TKeffeler
@TKeffeler Жыл бұрын
Cremation melody.
@somebodyelseuk
@somebodyelseuk 3 жыл бұрын
There's a guy Gig Performer, who demos how to do it. Might be worth a look..? Either way, sounds good... IMHO, he doesn't have the reverb, whereas your's maybe doesn't quite have the depth of sweep...? I dunno, I'm a guitarist, the synth stuff is a little over my head, BUT I would say, keyboard amps weren't a thing for another decade back then, so it's very likely the original was played through a guitar amp. I've had spectacular results putting a B3 plugin through an AC30 amp sim with a Leslie cab sim., when I did a backing track for Whiter Shade of Pale.
@Spacemartini
@Spacemartini 3 жыл бұрын
Thanks, nice discussion👍 I believe Pete did just plug the Lowrey organ to synth which created the pulsating and the filter sweep. I do hear my sweep could be a tad stronger.
@somebodyelseuk
@somebodyelseuk 3 жыл бұрын
@@Spacemartini yeah, I understand that. What I'm pondering is how the results got from the synth to the tape.
@timehasbeenkind
@timehasbeenkind 4 жыл бұрын
Excellent !!!! would you mind if I put a vocal track to it?! New Friend here liked and subed!
@Spacemartini
@Spacemartini 4 жыл бұрын
Go ahead mate!
@timehasbeenkind
@timehasbeenkind 4 жыл бұрын
@@Spacemartini Hey! Can you email me timehasbeenkind@gmail.com Thanks !
@Spacemartini
@Spacemartini 4 жыл бұрын
@@timehasbeenkind sent you mail.
@timehasbeenkind
@timehasbeenkind 4 жыл бұрын
HEY! Your emailed bounced, Maybe an Gmail problem? Sent again!
@augustosposaro713
@augustosposaro713 Жыл бұрын
Ahora entiendo todo...Pete Towshend se comunica con seres extraterrestres con esta música.
@james12cool
@james12cool 3 жыл бұрын
like p47paul siad I would like to use in my cover version very nice bro \m/
@Spacemartini
@Spacemartini 3 жыл бұрын
Go ahead! Do post me the link when you'll get it done 😎
@michaelgesner2180
@michaelgesner2180 9 ай бұрын
How did you set up your jdxi to play this? details please!
@Spacemartini
@Spacemartini 9 ай бұрын
Slicer effect controls the pulsating sound, lfo opens and closes the filter.
@michaelgesner2180
@michaelgesner2180 9 ай бұрын
what bank and number? please @@Spacemartini
@Xanaduum
@Xanaduum 5 ай бұрын
Looks like simply 70s organ patch, then slicer and lfo. The lfo control on this is annoying to be honest, could do with a few more knobs, especially for the ADSR. I mean it has an anolog synth in it, but doesnt have enough control.
@anthonybrown5550
@anthonybrown5550 10 ай бұрын
Awesome stuff. Did you ever find out if this patch can be exported (and therefore *coughs* ……shared?)
@testohtoby
@testohtoby 5 жыл бұрын
Roland does Farfisa !!!
@greatunz67
@greatunz67 Жыл бұрын
it sounds ok, not as deep or textured as the original, but Pete used a giant early days synth the size of a room to do the original lol
@TAWTAW-hf3xw
@TAWTAW-hf3xw 4 жыл бұрын
Did you do this all on the JDXi?
@Spacemartini
@Spacemartini 4 жыл бұрын
Yes, straight live JD-XI performance.
@paulberg9432
@paulberg9432 4 жыл бұрын
Can a Roland V synth get this sound
@Spacemartini
@Spacemartini 4 жыл бұрын
I doubt it has the same slicer effect algorithm as the JD-Xi which really made this sound. For example I cannot achieve this sound with my Roland Fantom G which might have a more similar fx-engine as V-synth. The filter sweep should be easy to do with any synth but to get the pulsating sound right that has been the issue fir me.
@paulberg9432
@paulberg9432 4 жыл бұрын
@@Spacemartini thanks. I didn't think so
@hemi846
@hemi846 3 жыл бұрын
¿¡HOW!?
@carlos_aguirrexd
@carlos_aguirrexd 2 жыл бұрын
WTF with your photo? HAHAHAHHAHAHA
@hemi846
@hemi846 2 жыл бұрын
@@carlos_aguirrexd XD
@carlos_aguirrexd
@carlos_aguirrexd 2 жыл бұрын
@@hemi846 Olvídalo, ya me dí cuenta que te gusta el shirpost xd. Eso explica mucho xdr
@bobthrem4540
@bobthrem4540 5 жыл бұрын
What patch are you starting with?
@Spacemartini
@Spacemartini 5 жыл бұрын
It's 70's E-Organ (check out the screen).
@moosey62
@moosey62 6 ай бұрын
KerrrRANG. CHANG CHANG
@TheFokker03
@TheFokker03 3 жыл бұрын
hey,that's quite good,not as good as the real thing but near as damn it.
@BrentMB79
@BrentMB79 4 жыл бұрын
Wrong notes on the right hand but nice work!
@andrewlopata3975
@andrewlopata3975 3 жыл бұрын
Yeah, the sound is very good but I think the B should be a C# in the A chord.
@xHadesStamps
@xHadesStamps 2 жыл бұрын
@@andrewlopata3975 Pretty sure it clashes in the actual recording
@ianfantomx7
@ianfantomx7 Жыл бұрын
chords are not quite right … the ones that are wrong are in the verse you constantly play an A9 and its a straight A 2nd inversion . also in the very front of the intro the moving thumb note is incorrect
@NoMoreAsterisks
@NoMoreAsterisks Жыл бұрын
Thanks for the corrections. Would you be so kind to post a video showing us little people how it's done?
@frankfranklin7922
@frankfranklin7922 9 ай бұрын
Don't be offended. There's always gonna be some wise guy who says he can do it better and then wimps out. YOU DID GREAT!!!!!!!!
Pink Floyd - On The Run - Roland JD-Xi Cover
2:21
Spacemartini
Рет қаралды 112 М.
“Don’t stop the chances.”
00:44
ISSEI / いっせい
Рет қаралды 62 МЛН
How To Recreate The Keyboard sound in "Won't Get Fooled Again"
8:50
Roland JD-Xi cover Robert Miles "Children"
6:47
gaticos
Рет қаралды 14 М.
The Who - The Real Me - London 1979 (27)
5:35
hvh823iow
Рет қаралды 453 М.
How To Play Won't Get Fooled Again Keyboard/ Organ
3:48
Universe of Keys Youtube Page and Online Course
Рет қаралды 19 М.
The Who - Won't Get Fooled Again (Isolated Synthesizer)
8:51
ARP 2600 and the Who's "Won't Get Fooled Again"
7:31
Brad Decker
Рет қаралды 3,5 М.
Roland JD-Xi review | Top ten pros and cons
17:17
Woody Piano Shack
Рет қаралды 184 М.