Spankin new Silverado headlights with DRL and sequential signals

These just showed up on Amazon and I bought a set. I haven't seen anyone run these yet, just the awful photoshops in the listing descriptions. But I put em in and they look pretty good. I do plan to modify them further once I get some time, and make the amber-colored turn signals function as full-time DRLs and tint the lenses. I think it will look pretty good.
headlights & turns: amzn.to/3NCtge5
LED headlight bulbs: amzn.to/3D0WXk3
amber spray tint: amzn.to/3XCir0f
3157 LED bulbs: amzn.to/46zHzc1
LED tail lights: amzn.to/3JN41Vo
gearheaddezign.com/
/ @gearheaddezign
/ gearheaddezign
/ gearheaddezign

[@thelonewrangler1008]

Its crazy how much they modernize the look of that truck, i approve

[@GEARHEADdezign]

There's a lot of ugly junk for 99-02s, but I like these

[@elianaramirez4051]

👜

[@jesscneal]

Those sequential turns are dope 👍

[@GEARHEADdezign]

And I'm gonna delete those🤣

[@tylerangieslayton7455]

Those look good! I do agree it will look better the way you plan to rewire them

[@GEARHEADdezign]

I can't leave anything "normal"🤣

[@lionelbutnotrichie7703]

Howd you get the drls to stay on at night. My drls only work during the day time and shut off as soon as the headlights turn on. I saw a video where a guy put a jumper between pin 87 & 86 where the drl relay goes but i dont lnow if its safe

[@GEARHEADdezign]

I just made my own switched 12v circuit with a fuse tap. The drl circuit turns off at night or with ebrake on, or park in auto.

[@allencummings6285]

Is there a way to make the amber the DRL and stay on at all times on these?

[@GEARHEADdezign]

Yeah, I'm going to rewire the parking light so the DRL and amber turn are on constant

[@GEARHEADdezign]

I'll have a video on it as soon as I get some time

[@Mr_Ruhl]

How are these headlights holding up for you? I think they're the best looking "new" lights with the LED DLs. The shape just looks better and more OEM to me. I was just concerned about the LED DLs and turn signals burning out and not being replaceable. Does the startup animation bug out when you start the truck?

[@GEARHEADdezign]

Good so far, after almost a year. No burned LEDs...I do have the same concern. The startup animation has a hiccup while the starter turns over and then it's normal. I used my own keyed 12v that drops out while cranking. If you use the factory DRL circuit it won't.

[@franciscoochoa3891]

Hey man I seen ur videos about transmissions I'm trying to swap my c1500 to a 454 manual do you know what transmission would fit a 454 and maintain the 2wd

[@GEARHEADdezign]

Technically...you can use ANY manual from GM. NV3500 or NV4500 would be a bolt in for that 88-98 generation. But you could also do T5, T56...

[@luckyrazrbk1]

How did you get the bafs to stay on without the how did you wire them for the led bars to stay lit up without the lights on

[@GEARHEADdezign]

I wired the to a switched 12v

[@luckyrazrbk1]

@@GEARHEADdezign o I gotcha, cool

[@clementelopez5449]

How did you get it to do the switch back from white to amber

[@GEARHEADdezign]

The lights came that way.

[@aidantanny7230]

The link in the description has ones with black Housings, how did you get the chrome ones?

[@GEARHEADdezign]

Wow, way cheaper too. The seller must have changed the listing. I just went to my Amazon orders and when I got share it goes back to the black housing with different photos. Doesn't look like those have the sequential turn signal either. Maybe they're unavailable now?

[@aidantanny7230]

@GEARHEADdezign I guess so. I was really hoping to find those ones to throw on my Suburban. I'm gonna keep searching, I'll let you know if I find them.

[@GEARHEADdezign]

@@aidantanny7230 yeah definitely. Cause I'd like to be able to replace these if something happens. And I was planning on modifying the signals but that makes me hesitate. Lol

[@dailylifeasragegage5786]

Do you have to be driving for just the drl part to be lit up without the lights on

[@GEARHEADdezign]

If you tap into the factory DRL wire yes. I ran just a switched 12v, so if key is on, DRL are on

[@mikewerp2777]

What grill is that on this truck? Haven't seen that one before

[@GEARHEADdezign]

I cut up the stock grille and modified it. Painted the center bar, and I cut out the original mesh and top of the surround and added my own honeycomb. I have info in one of my old videos

[@GEARHEADdezign]

The bowtie is just the stock one taken apart, painted and vinyl'd

[@terrygennings5023]

how is the fitment on the headlights any issues ?

[@GEARHEADdezign]

Typical China fitment, but you can get it right with some tinkering

[@terrygennings5023]

@@GEARHEADdezign did it leak at all

[@GEARHEADdezign]

@@terrygennings5023 nope

[@terrygennings5023]

@@GEARHEADdezign i have everything thing wired up but only the turn signal part of it works i used butt connectors into the turn signal wires

[@GEARHEADdezign]

@@terrygennings5023 So the drl part doesn't work? What did you grab for power on that circuit?

[@silentbravo]

Fancy, but not to ricer

[@GEARHEADdezign]

There's a lot of really bad stuff on Amazon...but I bought these as soon as I saw them