the LARGEST‼ set of BetaFlight Tuning Presets 😱

[@AsgardStudios]

Mark, thanks so much for putting this together! You are an invaluable asset to the FPV community.

[@amin0_acid310]

Thanks for all these wonderful preset and tuning options in BetaFlight. Was new to the Hobby a year ago now and since 4.3 these have been amazing to get a base tune/set up on all my quads. Haven't tried to do advanced tuning yet, always swing by here and JB's site for all my uber techie needs and explinations. Really appreciate all the work folks like you do to help out new and vets to the hobby. Cheers!

[@Mr_Meaty]

Wow... My Darwin tinyape came with base betaflight settings and it flew OK with a few wobbles here and there. I applied your 2s 3" toothpick preset and it made a WORLD of difference! So smooth and stable! Makes this budget drone feel like I paid way more for it! I'm excited to start dialing it in. Thanks!

[@RC-Flight]

Nice! Thanks for taking the time to make this video! I’m new to betaflight and just wrapping my head around some of the more involved parts of BF. I’m OK with the basics of setting up a new FC, just haven’t played with tuning yet.

[@cheechfpv]

Thanks Mark for taking the time to create these presets for the FPV community. Also would love to see the 4.4 presets also on 4.3.

[@RickJamesFPV]

Thanks Mark! I really liked your 4.3 Preset on my 5" quad. I plan on flashing 4.4 this week and will try out your new stuff. Thanks for doing the work man.🤙🏾🙌

[@MonroeKA]

The cinewhoop tune "fully loaded" (48khz, rpm filtering, high build quality, ultra cinematic) is a dream to fly. Thanks for making these updates easier and easier to follow along with.

[@gabrielnunes159]

Thanks my friend for such a great contribution for the community! Best wishes

[@franziskusbeyer4528]

Thank you. First I tried to start to tune it by myself. Now I just used your preset and it flies nice.

[@newbsimhouse2358]

Using your presets on all my builds now. They work so well. I have a Cinelog20 I swapped the FC in. I am running your 250-300 cinewhoop (96hz, high quality build, RPM filters, and Dynamic thrust. Works like a champ.

[@samavella8831]

Thanks Mark! Great video and thank you for all your contributions to this amazing hobby!

[@flipfpv4539]

I’ve just used your 7” preset for my Chimera 7” in Betaflight 4.4 flys amazing Very smooth and efficient Thanks Mark 😊👍

[@KostasGur]

Which preset you used? I want to update me Chimera 7 to 4.4. but it is around 1300g with a liion and a gopro and the one I found for 7'' is up to 1000g

[@flipfpv4539]

@@KostasGur I used 6”-7” AUW 700g but that’s no GoPro and 430g LiPo 3300mah 6s 😊👍

[@Michelsen3K]

@@KostasGur could you tell me what you ended for? i'm using a 7 inch as well with gopro and 8000mah battery at 1950g :-S

[@_Brando_69]

As always man thanks for your contributions! Cant wait to try it. Took a break from the hobby for about a year but about to get back in.

[@BrainDeadEngineering]

This is very professional.

[@GardoRotor]

These presets are an amazing time saver, thanks for all you do Mark!

[@JohnCuppi]

Thank you for all the work you do on these presets!

[@volkergoe]

Thanks for putting all the thoughts and work into those!

[@MichaelRogersJesusrules]

Cool. will try one or 2 out when i can fly better!. thanx for sharing!

[@TheTomJon]

Legendary stuff Mark!

[@theHotpointHoodlum]

Dude. Sick. Thank you!

[@MidnightMarrow]

I assume securing a stack with soft mounts, fixing TX's firmly to the frame, having shorter twisted wiring and the like would make for a "clean build" with less vibration and if so having a stupid EMAX Pagoda-2 attached for the VTX instead of a smaller antenna might drop that down to medium? lol

[@Cyenergy3]

Legend!!! Thank you for everything you do 👊

[@Tonynux]

Thank you, Mark!

[@mr.m.4887]

Hi Mark, thanks for that great video! I'm using your presets since early days of 4.3 and I'm very happy with it, additionaly saves a lot of time. One question: What if I decided to change a preset. Lets say if I picked "5" race quad" tune and now put a GoPro on it. Can I just do an "overwrite", pick the preset for the heavier "5" freestyle quad with GoPro" and go with it? Or should I reflash first and setup from scratch?

[@bull_shannon_fpv]

Sweet. I suck at tuning and have built and have in my "hanger" just about every size, long story. ( seriously from 55mm all rhe way to the Iflight xclass 950mm) But biggest I fly regularly is 6in. Above that it really helps if you know what you're doing. Thanks for these in advance Mark. Oh and" quality" build tab... 👌. I ain't perfect. I try but shit vibrates different from frame to frame

[@AZ-FPV]

Thank you for this video and all you presets - Noob question warning: If i save my existing BF 4.3.1 setup by using the “save preset” option and then load your preset for BF 4.4 and then for some reason i mess up and want to go back to my original 4.3.1 BF setup, can i just load that preset and it will take me back albeit it’s to an older version of BetaFlight? Or does that only work within 4.4 or 4.3 only. And is saving a preset better, or saving a “Diff All” CLI text file, or saving a “Dump” CLI text file? Thanks 🤘

[@ReggieRailSystems]

I’ve just watched your post on UAV presets overview. I recently purchased another quad, a Darwin. Cine ape 25 with Walksnail avatar Mini,,it arrived from the factory with a flight controller that was corrupted, and I was able to reflash and get it working. My question to you is, do you have on presets somewhere a tune for this particular model? Thank you. Bob Griffith, Florida

[@gogus357]

Awesome thanks 😼

[@MCsCreations]

Amazing work, Mark! That's more than professional, well done! 😃 Stay safe there with your family! 🖖😊

[@jessiahd.6143]

Hey Mark! Ihave a question about tuning. I just built my first 6" 6s quad and I am trying to find a decent tune. I'm running 2406 1650kv motors and my weight (w/o battery is 465grams. with battery 690-785 grams. I set my PWM Low frequency to 48khz. Do you have any recommendations on a pre-set tune that would be a good starting point? Thank you for making these videos!

[@donochetti2177]

Thank you so much!!!!

[@dinosabic5383]

I am trying to use the 10" tune. Works decently, however my t5 3115 get suuuuuuuuper hot. May I ask what BL32 settings you use? Motor timing etc etc.? Thanks so much if you happen to see this.

[@farrrkas]

Hi, When i look at the presets I can't find the exact one's what i see in this video. For example i only find your 7 inch tune :- 700g version not the 700-1000g verion what is visible in the video. Also like the half of them is not showing to me. I applied your name as a filter. The 500-550g is not there either. What could be the reason? Thank you , and keep up the awesome work!

[@uavtech]

In personal repot yet. Will be merging in to BF this week.

[@gmivisualsjason3729]

Excellent video

[@jorgevasquez6836]

Hello, thanks for the great information. I would like an orientation, I want to have good buoyancy when doing splits and that the drone does not fall too quickly. It is for a 5 inch fpv drone. Thank you.

[@jorgevasquez6836]

Which preset would be good for me to use dynamic idle and not drop so fast when doing a Split S?

[@rubengarciajr7560]

Mark, running your preset tune for the 7" long range quad. The thing is, sometimes when I flip the switch to arm the quad with the throttle stick all the way down, the quad tends to lift up. What do you thinkg I should adjust to prevent this?

[@johnnywong83]

I want to try out some your preset on the CineBot 30. Which preset would you recommend. Not sure your consider it a cinewhoop or a Cine log

[@sten6537]

I find it hard to figure out what pwm settings I need to apply to 1s whoops, 5inch racers etc. Can't find alot of information about the escs.

[@gadgetrc94]

Thanks Mark! I'm surprised the conversation about build quality focused on soldering rather than peripheral component mounting or prop health. How bad does a soldering job need to be to affect vibrations?

[@uavtech]

Not focused on soldering. But folks build pride does and was using as an example of it not mattering when it comes to vibes performance.

[@FPVecinos]

this helps a lot! i have a doubt, i have a QUAD racing with ESC with flycolor 60A stack and f50 2200KV motors. i am using the HQ build present for 500 - 550, at the beginning i had desync so i changed the motor timing to 27, i don't have motors timing anymore but the motors go down very hot... i have tried different changes but it doesn't change... any recommendation maybe? thanks!

[@uavtech]

if motor is desyncimg, that ESC is not in good health. Try Medi7m Quality or Low. If still hot, the ESC is the issue.

[@FPVecinos]

@uavtech thank you!

[@ascosis]

Great video! I'd love to see a preset for the 4 inch micro long range class like the flywoo explorer.

[@uavtech]

Eew, let me add that.

[@mcferran6720]

Can i use Preset Cinelog for pavo25 with F-405 BMI270? I never flew this drone well.....answer me some day any comment.🙏

[@uavtech]

yes.

[@mcferran6720]

@@uavtech I tried the betaflight 4.4 preset today and the Pavo 25 continues to do the same fail as with 4.2 and 4.3... when removing the gas in a dive the drone accelerates for a few seconds, it makes me desperate and I don't know what it can be, I have the original components of the Pavo 25. Could it be that the FC is defective? Can you help me plz?

[@uavtech]

@@mcferran6720 switch to a props-in configuration. See kzbin.info/www/bejne/bXjalnpmh9N2nMU

[@mcferran6720]

@@uavtech You are tbe fucking boss. I reversed the motors and flies like angels.

[@MindRiderFPV]

Great! Thank you.

[@adilsongoliveira]

Hi. Is there a way to use those with INAV? I'm having diagonal oscillation problems with a 10" iflight XL10. Thanks!

[@uavtech]

eh, yes'ish. I'm not 100% there is a 1:1 for PID gains.

[@NunoFPV]

Thank you very much 😉

[@elbedouirayen7938]

Hi, thank u for everything please i have a 7 inch qav whoop x8, can i use the 8" and 9" cinelifter preset? I use 2807 motors 1300 kv thank u so much

[@joshdaniel4307]

New follower after watching this …if asking to much I understand…have flown bnf for two years jus built my first drone (aos5”w/o3 and Axisflying Argus pro stack) it flys good jus not like the bnf which is very disappointing…I’m on 4.3 but can flash to 4.4 if needed …recommendations on presets you would select …thanks for your time an knowledgeable videos

[@uavtech]

5" freestyle.

[@xflixfpv]

Would be really awesom if youd add a heavier tune. Achieving 650-750g with gopro is really hard today with heavier gopros, o3 being heavy n everything.

[@IlyasFPV]

Hey there, i am using mark 5 DC frame with 1800 Kv xing e pro motors and O3 unit, and mostly i am flying in mountains so what is the best preset for me to capture smooth diving and cinematic shots? Please reply i am new to this hobby.

[@ZorrotorFPV]

5 inch without gopro preset

[@divingfalconfpv4602]

The for rekon7 or a 8" (auw 1,770g w/ 12aH battery). First 7" preset did not work on think was 4.3. Drone ran away

[@uavtech]

Try low build filter on 4.4 7" preset.

[@divingfalconfpv4602]

@UAV Tech thank you so much. Cause I want to go back to betaflight now on my 7/8" I thought inav rth be better which sometimes it is. But where I fly I'm finding a lot of compass interference. And I don't use position hold that much. Rarely when taking goggles off.

[@EliteFpv]

Put the your 8/9/10 preset on my brand new build and burnt up all my motors on the first flight. Was an iflight 8” with emax eco II 2807 motors 1500kv. Did not enable dynamic idle or bidirectional dshot. I used high quality build. Was brand new motors brand new fc esc and brand new hq 8x3.7x3 it flew really good on stock tune before I added your preset. Thought it would be even smother on the prop wash. Guess not.

[@uavtech]

Nice.

[@SemostevMedia]

Hey mark. You have been a great help in the fpv world . What preset should I choose if I own a 5 inch quad but I want to fly slow and cinematic

[@uavtech]

Same, just smooth out your rates.

[@neilfpv]

I hope it's ok using your 1000g-1400g preset which is for 8 inch on my 7 inch quad. It's because it weighs 1200g. So far, I tried it this evening just crusing back and forth in front of my house, and fast, it looks smooth. The motor was warm but not hot, just like a little warmer than human's body temperature. I'll do a real flight test tomorrow.

[@Martoriass]

Is the cinewhoop preset aimed at any specific weight? I have a 3.5" around auw ~550g

[@uavtech]

that is right. let me add a weight range to it.

[@Martoriass]

@@uavtech Thanks! It seems to fit fairly well out of the box but too much snow to do any daring flights :P

[@bigdaddyjuicerfpv2033]

Any chance you can make BF4.4 tunes for some of the popular BNF quads? iflight Evoque, Geprc Mark V, etc. I have an iFlight Nazgul Evoque 6" Deadcat. Your 6"/7" kinda works. Best tune I can find at least. Your 5" Freestyle with GP works perfectly on my DIY 5" Banger!

[@uavtech]

I don't have those quads to make custom presets. :-( Manufacturer's tune?

[@bigdaddyjuicerfpv2033]

@@uavtech It came with a great tune for 4.2. When I updated to 4.3 and tried bringing over the tune, it never flew the same. I want 4.4 for the GPS RTH if nothing else.

[@Cloudy-Media]

for the evoque 6" DC you can convert the iflight 4.3 to 4.4... works well for me.

[@Cloudy-Media]

unplug the GPS before doing this then once on 4.4 plug in and set up GPS

[@bigdaddyjuicerfpv2033]

@@Cloudy-Media Where would I find the 4.3 tune for the iflight evo 6 DC? Mine came with 4.2 and switching to 4.3 sucked. Thanks!

[@levangugulashvili1296]

Hi Mark, Is there a way to have colourful fonts? I liked custom fonts from BF 4.3.

[@uavtech]

for Digital VTX or Analog?

[@levangugulashvili1296]

@@uavtech for digital DJI system

[@levangugulashvili1296]

V2

[@FlowPR.]

Dynamic idle made my nazgul5 v2 fly terrible when in low throttle. Like it wasn't responding to my throttle commands from 25%-40% at all. Anyone knows why?

[@uavtech]

did you have Airmode enabled?

[@FlowPR.]

@@uavtech yes

[@FlowPR.]

@@uavtech did I have to turn it off?

[@mlentsch]

WHat in the heck do you select for PWM frequency when you're running 16 - byRPM??

[@uavtech]

"16 & 24k PWM Settings"

[@mlentsch]

@@uavtech Thanks, Dude!

[@TriMeX1987]

Hey, I just came back cause I use an older crocodile 7hd plus from geprc.. but updating it to bf 4.4.2 the defaults where horrible. Now I want to use youre preset but it says minimum size motors 28xx Mine are 2306.5 1350kv So It's not recommended I use the tune preset. I know the newer geprc's come with propper tunes.. but this old one does not.. leaves me kind of hanging.

[@uavtech]

if lower motor sizes, it may require more Damping slider and more Master Multiplier slider.

[@TriMeX1987]

@@uavtech so just use your preset and then make changes to the sliders?

[@uavtech]

yup, to increase performance. It depends how hard you will be flying that 7". Many times, those are not flown hard, so it may be fine regardless. If you do say have any really fast bounceback (hard to see) on flips or rolls, increase Damping. If you want better prop wash performance, increase Master Multiplier.

[@TriMeX1987]

@@uavtech thnx.. it wont be flown hard as in freestyle. But the wind can be harsh where I am. Thats why I think its so wobbly in the cam. It will be used for cinematic style filming.

[@skydronefpv9250]

How do I get your presets. I added the link but tells me that it is an error. I do not think I am getting the full URL. Thanks

[@uavtech]

they are in BF by default now.

[@grampafpv8013]

Is all of weight with a battery ? or without ?

[@uavtech]

with

[@grampafpv8013]

@@uavtech okay im using your preset without a gopro 5'' everything works great except for bounce back on roll what should i do to fix that ?

[@ChrisHarmon1]

Professional? I been tuning whoops daily for last 26 years! Seriously though, thanks for all of your contributions.

[@uavtech]

Tuning for folks that fly movies (paid), yes, professionally. Awesome. 26 is a ton!

[@yfellimban]

What if I have a 5 inch drone but it is heavy (800g)

[@uavtech]

The heavy freestyle. Maybe just move up the Master Multiplier 2 more slots if it flies good on the preset to make it even better.

[@yfellimban]

@@uavtech thank you very much.

[@tweekFPV]

👍🏻👍🏻

[@alperenozgur]

where is 3" toothpick with insta360 go :P

[@uavtech]

Micro

[@marcino.3361]

Personally I don't get sense of tuning presets. Every build is so different, there is so many variables that makes generic presets hard to apply. I've read so many times in forums that some newbie just applied preset and has burned motors. I think the only valuable presets are about setting up peripherals like HD vtx, maybe RC link... that's it. If user wants to have quad tuned well, he need to do it the right way.... ;) cheers :)

[@uavtech]

IDK. I just did flight for all the 5" presets and each flies fine. 🤷

[@chiprobertson3094]

Im gonna make a video so i can be a pro too.

[@uavtech]

@chiprobertson3094 do professional tuning contracts too. 🙂

[@maelradec6766]

u da man