Oil Cooler & Fan Shroud Installed - RA24 Toyota Celica Project

Astro Rivnut Tool: amzn.to/2HAZN51
Rivnuts: amzn.to/2Fse0v8
We install an Xcessive Manufacturing rad fan shroud and electric fan kit along with a Koyorad 15-row universal oil cooler. Battle Garage Racing Service also comes to our rescue again, this time with the speedy delivery of a Beams 3SGE Blacktop exhaust manifold gasket. Plus JP from Stripping Technologies Inc applies a heat insulating ceramic coating to our custom exhaust manifold.
Support us and buy all your Go-Fast parts from our new SA Shop: www.speedacade...
Our Patreon page: / speedacademy
Our Merchandise page: speed-academy.m...
Follow us for up to the minute project updates:
Website: speed.academy
Facebook: / gofastwithclass
Instagram: / speedacademy

[@hansell317able]

Loving this build can't wait to hear that beamsy screamsy.

[@kyleroyce4365]

best build on youtube

[@The_True_]

Extreme precision rad foam tuning: +5hp.

[@merkantelismo]

Suggestion, you may want to put a grommet on that hole where you pass the oil cooler hoses through or you can take a rubber hose, slit it in the middle and wrap it around the hole to prevent the hose from rubbing. I know they're braided and meant to last but it's one thing less to worry about knowing that it will be a daily driver and regular track car. Plus it's black, it can be easy to overlook small damages. Also, cheers to Joel Luz of Toysport. Can't go wrong with those folks!

[@SamS-lv1hy]

That 5 series wagon in the background is looking good

[@simonkent1291]

Love the fact you have a Bad Obsession Motorsport mug.

[@beohbe64]

Great stuff. When using adjustable wrenches, keep the non-adjustable side on the front side of the direction of turn. That way the fixed side wears the torque and the adjustable side really just keeps it snug. You'll get less wear and tear on the adjusting gear.

[@speedacademy]

Great tip thanks!

[@lucascoebergh396]

that's why i bought the twist type riv nut install tool! works really well in small spaces.

[@doctorlobsteroctopus]

Also, absolutely can’t wait to see this thing start.

[@reallunacy]

I actually bought an Astro rivnut tool the other day as well. I got the right angle one though because of space concerns.

[@krakdaus5442]

I'm so glad your channel is growing keep it up Connie is the reason I subbed

[@thegenerousdegenerate9395]

The innuendo is strong with this one!

[@VEDEMRACING99]

Always gotta use the lube! Great video, can’t wait to see her running

[@carl_marks1626]

Can’t wait for the next episode. Good work guys

[@alpacarama21]

Might be wise to add support brackets for the top of the oil cooler. Sure wouldn't be hard with that nice fancy shop you guys have now... Anyway looking forward to the startup video!

[@Crankaholic]

Thanks for those great hose instructions PT!

[@asylumville8544]

Can't wait to here the exhaust!!!!

[@ScottMerrihew]

Some late night Connie action!

[@deweberis2709]

OMG! That big bad man stripped Connie's pipes... and you, Dave, just kept watching it. :(

[@-CLASSIFIED-]

awe man i cant wait to hear the ITB's

[@brianneal9204]

I ran across the same issue, but I need to put them in a truck, so I got some manual screw in tools and a pneumatic tool. The pneumatic tool was more expensive, but its the bees knees. I used it a lot.

[@thekiddupree5567]

Header bolts torque spec...."Moose Ft/Lbs".

[@fila1445]

Kid Dupree shood be Moose/Lbs

[@antbymcnair4297]

Great episode, keep it up guys

[@Spider_Gooch]

Hoooooooweeee this car is getting the good shit. Koyo is always quality.

[@danieltubbs5422]

I have the same Rivnut gun. two thumbs up

[@dunzhijialuo736]

I'm not sure but i think the oil cooler looks a bit small. loving the build !! good job to all of you !

[@BradLancaster86]

you and peaches need to contact RCR and bring them up north.

[@thegenerousdegenerate9395]

I've heard innuendo this bad before, it didn't bother me enough then, but it does now!

[@carlbenz3341]

The rivnut tool will use less space if you dont screw it in the whole way, you can screw it further afterwards and do another stroke. ;)

[@paleaura2327]

That Jeff Hardy chair hit. \m/

[@doctorlobsteroctopus]

Something about JP slightly reminds me of Adam Driver, the actor who plays Kyle Ren.

[@dsturbovq]

Hey can u do a comparison between fan shroud and without a fan shroud zip tied to the rad

[@karljay7473]

This build is going to be awesome, a car that weighs in at some 2300 lbs with near 200 hp? I really want to swap a BEAMS into my 71 after seeing this video, but don't really want to do all the computer stuff. Is there any practical way to use the stock computer with the BEAMS or maybe even convert to carbs?

[@freestyleskyline]

Karl Jay beams motors have and immobilizer so unless you pay unnecessary amounts of money to someone to bypass it you're better off with a stand alone.

[@jeffreymoore4132]

Love your content guys. Been a longtime supporter. I was wondering if using a longer bolts with a spacer in between the mounting tabs would be better for your oil cooler. Your going to be putting some torque on *just* the lower tabs when the air hits it at track speeds.

[@speedacademy]

We're going to test it this way first but from our not-so-scientific tug and pull test this cooler wont be going anywhere

[@RobertKohut]

Nice!!

[@Killerconceptz]

Pretty sure the ft.lbs. Is Guttentight

[@themechanic6117]

You guys asked for stickers so I sent one of mine. Were you only asking for stickers from sponsors or suppliers??

[@speedacademy]

We got em, thanks! We'll be sure to show em off in an upcoming Tune Up episode.

[@LateNightRituals]

E39 wagon 🤩🤩🤩

[@adamdrumonde1664]

You gonna do something interesting with the headlights like intakes or leds? aka ANY RICE????

[@speedacademy]

lol got some Hella replacements is all.

[@negerpenis99]

Great episode as always, but stop teasing us with that E39 in the background, at least cover it up!

[@laynerichardson4913]

Even though the humor is mostly stale at least you guys are finally using quality parts like Koyorad.

[@MichaelGuardiani]

PT's OCD where he has to have his green tape

[@seandonaldson5084]

POP! Pop up video!

[@kevinbowers3917]

Just wondering if the oil cooler should be mounted inverted, to promote circulation, and provide for oil changes?

[@benliu6420]

Kevin Bowers I think if you invert it, it'll trap air bubbles in the top. This is coming from Carroll Smith's Tuned to Win if I recall.

[@magnetic0314]

If you mount it upside down, it will only flood the bottom couple rows with oil leaving the top of the cooler doing nothing.

[@neryhinojosa9785]

More updates on the k20 swap 240 please

[@elgenerz]

@Speed Academy Where did you order the front spoiler from? I searched Toy Sport but I can't find the retailer.

[@bigrodrigo1]

Jolla toy sports?

[@shwayjayy]

@speedacademy i wanted to know what size oil filter adapter u guys used. I also would like to know were. Im trying to buy an oil cooler for my 89 celica with a 3sge 1st generation engine. Its been a hard task doing the research. Im trying to get my car ready to track. Right i still have alot of work to do. Any help, advice would be greatly appreciated. Im not as skilled in this area but i learn quick. Im hoping to hit the track one day soon.

[@mariosnikolaou5212]

FINALYYY 😜

[@broadwayline]

yo DP!

[@Limeayy]

Problem is their radiators are not limited lifetime warranties.

[@DarringtonMorris]

Where's the Amazon link?

[@speedacademy]

Its in the description now!

[@tuurbow]

wheres the link for the rivnut tool?

[@speedacademy]

Check the description there's a link now!

[@kweightthree]

.375 Moose Newtons

[@vomdeich1011]

We used fancy pneumatic tools to set blind rivet nuts back in my work shop life. For tight spaces we had a specific spanner set but i'm pretty sure you could also use just a spacer and screw to clamp these rivet nuts. shop.eisen-pfeiffer.de/Article/10341

[@speedacademy]

Thanks for the link!

[@aaronbryan5095]

RAD

[@callmetree19]

How many time will he say RAD.....

[@elarr8733]

Connie Sellecca pronounces it Celica.

[@mtktm]

Cringes when seeing hoses go through a metal hole without using grommets on the holes

[@Dabber422]

You have to smoke some weed and watch this video, Hilarious :)

[@jordanlewis3790]

God i wish i could shill like you

[@wilhobbs207]

It's 37 pounds. I swear I didn't watch right to the end. ;-)

[@cultusmechanicus8001]

Tourque spec ..........OVER 9000 (╯ ͝° ͜ʖ͡°)╯︵ ┻━┻

[@guerro327]

35 ft lbs is my guess

[@JorgeLopez-ep6gq]

Someone is getting sponsored and potentially paid for advertising now! ;(

[@speedacademy]

I know so sad that we are actually getting some dollars that support us and allow us to make videos...

[@BlakDawnman]

Gets fancy wrench, immediately uses incorrectly.