SPECDTUNING INSTALLATION VIDEO:2003-2007 INFINITI G35 COUPE PROJECTOR HEADLIGHTS

SPECDTUNING is proudly recognized as pioneers in the automotive industry for products and service. Our main goal is to provide the highest quality products at the lowest prices imaginable. The SPECDTUNING warehouse is the largest in Southern California carrying an array of aftermarket products. With a wide range listing from: Projector Headlights, L.E.D. Tail Lights, Third Brake Lights, Bumper Lights, Corner Lights, Front Grills, Bumper Lips, down to Headers. These are just a few items mentioned from the selection available. Furthermore, all the products are updated constantly keeping SPECDTUNING ahead in the industry for all makes and models of vehicles. Always prepared to serve every guest; please visit us at SpecDtuning.com for more info or call 909-839-2533 to start a wholesale account today or visit us at www.specdtuning.com. Staff at SpecDtuning are here and ready to help.

[@silverspringhamir2478]

He makes disconnecting the harness (at 2:30) so frrrrreeaaaking easy. Whereas, it took my friend and I 25 minutes to remove his harness on his Z lol.

[@anurallah]

this video is the best. it sure help me change my ballast and headlight and i had no idea about car stuff. thanks alot man

[@firstpurewater]

Can we have a tutorial for the black and white wires for this.

[@mrfireawaynow]

Great video for bumper cover and headlight removal. Very detailed and helpful. Thanks very much!

[@austinbradley3411]

put everything on just like video but the low beam on passenger side blinks when I'm driving sometimes and some times it works perfect and ideas would be awesome

[@TheAZchambers]

well im gunna be trying a similar install today hope it goes smoothly

[@Owashing1]

Great tutorial.

[@dontajones5994]

There are 2 screws on adjacent sides of the main bulb housing to adjust the bulb itself. Took me one year to figure it out :) Also do I have to wire the halos up separately cause the wires for mine are hanging

[@dabitat]

is there a reason you didn't connect the extra power/ground wire? that's extremely useful information, considering it powers the whole other half of the light.

[@grembf158]

how do you adjust them up and down?? that's what I wanna know!

[@hero-tu6up]

does anyone know how to replace the small bulbs? mine went out

[@daBaydestrian510]

do you need to remove the bumper just to change the light bulb?

[@KEE64N]

bought ccfl angel eye dual halo & LED DRL Projector h/light for 2003 g35 coupe. came with no HID lamp but specs say should beukd be D2S bought D2s replacment bulbs. will it work with factory ballast?

[@ryanquinones925]

I bought these headlights and the black and white wires for the halo are not connected to anything and I don’t know what to do

[@Specdtuninginfo]

yes correct

[@FearmyG35]

Ideally, this is the same process for OEM 2007 Projector headlights right?

[@andrewgonzalez6145]

Do these fit the 04 sedan?

[@theblackmomba1]

do we need a new ballest if we want to install 6000k hids???

[@tacomafan7488]

i got exact same lights !

[@rvcg2023]

Bro there is two loose wires we’re do they go?

[@alpha6five528]

Is it me or did he COMPLETELY skip the fog light part ??? WTH ! The factory lights don’t work or FIT aim these lights ! Anyone got any advise ?? I’m trying to put HID’s in the fogs . Thanks

[@couchmayne4351]

Alpha6five Same issue here I have an extra cable hanging it’s detailed vid but missed parts but unfortunately none of these vids were helpful enough this is as good as it gets the other vids are fuckin ass guys have shitty angles and skip almost the entire process and just worry about how they talk and views

[@tbskirk]

do you have a way to buy things online ? or mabey ebay auctions/sales so we can purchase online ?

[@chewyrice2484]

How do I wire the halo?

[@Specdtuninginfo]

well it would depend was your old HID 6k? if it was the same then you should be okay but you really shouldn't need a new ballest.

[@pokeman6501]

Hi spec d i bought these halo lights for my 2004 g35 coupe and for the halo and the leds to work it says connect the black wire to the grounding and the white wire to the white wire to the negative umm what does that exactly mean i have no idea where to connect them to other than that at the moment i have no other issues its a great product but i have a car meet this saturday and i have tried to call the company but no answer day after day and i would really like to show these lights off thanks

[@firstpurewater]

Helping my buddy out and they need a tutorial for tat.

[@nolandavis3677]

What abt the hanging wires

[@JollyFlys]

I can't get the Low Beams to turn on, I installed everything correctly and I even checked on the original lights to see if the ballast or bulb was the problem but they worked on the original headlight. I think there's something wrong with the wiring harness that is connected to the ballast. Any Idea why this is happening??

[@jmcco333]

ballast probably bad

[@Specdtuninginfo]

+Leo Leyva We are sorry to hear that. You should check the wiring make sure nothing was damaged during installation. If all the wiring on the headlights look fine and undamaged, you might be having a problem with the headlight resistor.

[@enlightenedmiiind4790]

I just got my first G35 and I’ve got the same headlights but over half my bulbs are out, are the bulbs in this headlight replaceable? Also would love to know what kind of headlights they are

[@OmenGoldhelm]

Same my 5 mini bulbs are out and Idk what kind of bulbs I need to replace them

[@autograph415]

@@OmenGoldhelm h4s

[@xzess12gaming78]

@@OmenGoldhelm hey did you ever fix that ? I’m having the same problem the 5 little lights don’t work

[@thadmurray6208]

i thought this was the non hid model?

[@Specdtuninginfo]

we're glad that we were able to help you solve your problem!

[@dabitat]

finish the video

[@BlackKen302]

I'm go try this..

[@sukhb5]

I installed these lights but the halos rings dont work. everything else works just fine though

[@jiovanicontreras7947]

Same, thing happen to me but It was because I didn't click them together all the way.

[@aceblund3134]

same..

[@najeebraz2219]

You forgot to ground the ballast to the car!!! A piece of ground wire should be connected to one of the screws on the ballast and to the housing of the car.

[@djcandle3863]

My LED's and Halo ring have completely stopped working on my G35 after only 3 months. Is there a fix for this?

[@jbarah05]

djcandle check if the resistor didn't blow out if it did then you'll have to replace it

[@soznmusic]

i guess there's no way to aim these?

[@MoldRS]

How much do you think it would cost to get these installed profesionally at a place?

[@tokyonipples1335]

I cant be the only one having/had a hard time trying to het the socket harness onto the bulb!!!???!?

[@Specdtuninginfo]

No factory ballast will not work with after market ones.

[@Specdtuninginfo]

How to wire the Halos is showed in a different video, How to wire Halos and LED

[@jeffreyxiong205]

Spec D Tuning is it possible to change from halogens headlights to xenon?

[@rodneyakjohnson451]

They make it seem so easy the harness was a bitch ... not long enough for u to disconnect

[@Specdtuninginfo]

please visit k2motor.com for this product

[@Specdtuninginfo]

aound $100 more or less

[@abdulalawaz5]

scary voice!!

[@myownman91]

Heard those lights are cheaply made garbage..

[@Andy-wb4qm]

they are, never sits right, and the led's die out within months of your lucky a couple of years

[@Deathmetalmechanic]

Don't buy these junk lights. Trust me, i already did

[@najeebraz2219]

You forgot to ground the ballast to the car!!! A piece of ground wire should be connected to one of the screws on the ballast and to the housing of the car.