Toyota / Lexus Remote & Immobilizer Key Programming

Here's how to program a Toyota or Lexus wireless remote transmitter and immobilizer key by yourself without any special tools!!!
Key duplication at a dealership can get expensive, as they charge exorbitant amounts to program a new key. It only takes a few mins to program and you can do it yourself at home without Techstream software.
This aftermarket key was purchased from eBay, for about $30. It was then cut at the local Lexus dealership for $20.
There are two stages in programming the key: the first to program it to start the car, and the second to program the wireless remote to unlock the doors and trunk. You must have one master key already programmed to be able to program new keys and remotes.
Programming the car involves inserting the key into the ignition and depressing the pedals, then inserting the new key to be programmed. Insure the key matches the FFC ID of the original key before purchasing a replacement.
The remote programming involves inserting the key in the ignition, opening the driver's door as well as cycling the door locks. If your door lock actuators are worn out, the locks can be manually cycled.
The vehicle demonstrated is a 2000 Lexus GS300. Procedure should be the same for all 1998-2005 Lexus GS300 GS400 and GS430, and late 90's to early 2000's Toyota Camry, Solara, Avalon, Corolla, Rav4, Matrix, Sienna, Highlander, 4Runner and Sequioa, in addition to Lexus LX470, GX460, RX300, GS300, ES300, IS300 and LS400.
Get your Toyota Chip key here:
amzn.to/3959K62 (US)
amzn.to/3tDCexi (Canada)
Link to Etsy shop where you can purchase speedkar99's brother's socks, t-shirts or hoodies:
www.etsy.com/c...
Check out the speedkar99 Facebook page:
/ speedkar9
Check out the speedkar99 Linkedin page:
/ speedkar99
Follow speedkar9 on Instagram for behind the scenes coverage:
/ speedkar9
Subscribe for more videos just like this:
www.youtube.co...

[@speedkar99]

Get your Toyota Chip key here: amzn.to/3959K62 (US) amzn.to/3tDCexi (Canada)

[@ChrisMichaelsChicago]

ECU viginized and bought 3 new keys, and cut two. When programming the first key, all was good, but when attempting to add the 2nd (&3rd) key, the light didn't stop blinking. I think this is why. My original master key wasn't turning off the immobilizer. I bought the keys had one cut and tossed magnetic Slug and it. No dice. Somewhere along the line I got the slugs mixed up so I am trying to do the erase all keys except the master key but the version I found on a locksmith site didn't work. Suggestions on the 03 RX300 mij

[@videoscopevideorentals4286]

Instead of programming, just clone the key. I have a device called handy baby that can just clone your key.

[@pudd2ing]

This video saved me $300 for a new key at the dealership. $199 to make and $99 to program. You are amazing! Thank you sooooo much. I didn't get the lock or unlock part to work yet...........right now I just need the car to move and my spare key with your help did that!! Thank you thank.

[@speedkar99]

I'm glad it saved you time and money!

[@eteleakosonodi7186]

same thing here. Did you figure out how to program the locks? I managed to start the car with the new key, but it won't open or close the doors. The programming mode is active, the locks are cycling but in the end it just does not close the car. I don't know if it matters, but this is a 2002 Lexus IS, not a GS.

[@TPNWR10]

Transponder portion: 1. Insert master key in ignition 2. Press gas pedal 5 times 3. Press brake pedal 6 times 4. Remove key from ignition 5. Insert new key into ignition 6. Press gas pedal once 7. Wait for the security light to stop blinking (60 sec) Remote portion: 1. Insert & remove key from ignition 2. Cycle locks 5 times 3. Close & open driver’s door 4. Cycle locks 5 times 5. Insert key into ignition 6. Turn the key to on (Do not start), to off (Locks cycle) 7. Hold lock & unlock buttons (1.5 sec) 8. Press & release the lock button (Locks cycle) 9. Close the door to exit programming mode

[@crherniman]

I can get my 98 sc300 to learn/program mode but it won't accept my new remote. Any suggestions?

[@Conker999]

@@crherniman sc gang I have a 99 that's currently not starting going to try the steps on the video tomorrow

[@abdullateefolayinka301]

Can this work on a lost key?

[@tututata535]

is a new key also have chip?

[@user-dn9kk9qu5y]

This is excellent do you have on board remote programming for vauxhalls Corsa insignia?? Or any other cars ?

[@vannesspatthana1860]

Dude. You are a life saver. I helped my uncle purchase a very clean 2001 RX. The key that came with it started the car fine. But the wireless entry would not work. Thank you for the easy awesome video!!

[@speedkar99]

+Vanness Patthana I'm glad it helped!

[@Tolcum]

Worked with my 2002 Lexus RX300. Thanks man, had two keys to program at $115 each, so you saved me quite a bit here!

[@speedkar99]

Glad it helped you save money!

[@dort5436]

It's not working for me! 2002 RX300. I went through the process and security light keeps flashing even after 2 minutes. Oh well. I will spend the money for pro to due it.

[@miekolock4060]

On some older cars you will find that your lock and unlock button is weak or won’t cycle 5 times. You can also use your key on the outside to do the lock and unlock process rather then pushing button 👍💪

[@speedkar99]

Or cycle the thumb lock inside

[@miekolock4060]

@@speedkar99 I have actually never tried that one lol. I’m an automotive locksmith and these type videos come across my you May like all the time. I’m so used to using programmers I wasn’t even aware of the gas pedal trick. Most likely cause people NEVER CALL ME UNTIL THEY LOST ALLLLL IEYS LOL. I imagine you can not do this with all keys lost. But it’s a cool trick to know in emergency situation for sure

[@beiyzzz4851]

wont work on my gs, my rear driver side lock doesn't respond to any of the power unlocks, but only works with the thumb lock, my other locks just get tired after 3 cycles

[@miekolock4060]

@@beiyzzz4851 you trying to program the remote and it is not working?? Or you just mentioning your rear door lock is messed up?? The one that doesn’t work most likely needs a new lock actuator installed. What year is your GS

[@Kemet09]

Thanks!!! On my parents LS400 I able to program the chip, but not the remote portion. When performing the lock / unlock routine it kinda half-locked around 3-4 tries!

[@k0rc]

THANK YOU !!! This procedure worked on my 2000 Lexus RX300. I was able to program two spare keys. You just need to be patient at the last step and wait for a minute or two for the security led to stop flashing.

[@speedkar99]

You are welcome

[@sgeorge1988]

I waited 3 min and the light never stops blinking. any suggestions?

[@GaudierOps1]

@@sgeorge1988 same issue here. Was wondering if you were able to resolve the issue?

[@eurosonly]

This is exactly what I was looking for. Thank you so much for being straight to the point. I am in need of a secondary key for the car which I will be ordering from the link you've provided and doing the same steps to get my current key and the spare key to be programmed to the car after I get a new battery for it.

[@speedkar99]

You are welcome, glad it helped you with your new key

[@jehminjung89]

I just wanted to start off by saying Love you man. Next. If one has the access to tech stream: Its so much easier to program a Lexus Key ( Non SmartKey Fob) Requires one master. Then you insert a used transponder non virginized or new cut key with remote/transponder ( FCC might need matching?) Then to program the remote features use TS again and you hold 2 buttons. All the required steps are within TS. Its so much easier than doing this little dance. I actually tried these steps once and failed and quit thinking about it for awhile. Took out TS one day and it was Soo much easier. If you drive a Lexus its well worth the investment. Can also customize your car to disable seatbelt chime and turn on/off DRL for some models.

[@RSGAEL]

I'm so excited. I just programmed my new key after watching your video. It works like charm. Thanks so much.

[@RSGAEL]

It costed me $12 to get the blank key with fob from ebay and $35 to cut it. Lexus wanted to charge me $200 all together!!!

[@speedkar99]

I'm glad it helped!

[@rebeccanunez9859]

@RS GAEL when you took the key to get it cut did they ask for pink slip of car or did just cut and charge you?

[@RSGAEL]

@@rebeccanunez9859 No those are laser cut key. I just went to local mom and pop key place and they had a laser cutter to do the job. They didn't ask me for my id or Vin.

[@barbender3994]

This worked perfectly on my 2003 is300 the only thing that gave me a problem was connecting the remote everytime I did the unlock, lock step my electric lock switch on the drivers door would get stuck. So I had to do it manually with my hand while I pressed the unlock and lock button 5 times and after a couple of tries it worked 😂 I was so happy finally I can use the remote. And for this whole process of connecting the key and the remote Lexus wanted me to wait 2hrs and pay $120+

[@speedkar99]

+Kevin Ortega yes cycling the lock manually works if your actuators are worn

[@douglowry7382]

Saved me over $300 getting 2 extra keys done this way on my 2002 Lexus RX300. Thank you so much.

[@speedkar99]

You are welcome. Glad it helped

[@0821castro]

Unbelievable! You’re like a Lexus god. Thanks for the video. I got stranded at the park in the dark and my car gs 300 would not read my key for some reason. Then I found your video and like magic it turned on.

[@speedkar99]

Glad it helped

[@wayofsway]

Thank you so much. Programmed my key within 10 minutes and saved me $100.

[@speedkar99]

+Josue Loya your welcome

[@shay6170]

Thank you so much! Your video saved me a bunch of money by allowing me to program my car key myself!

[@speedkar99]

Glad it helped

[@mattgoves3031]

This worked like a charm on my ‘99 Land Cruiser, even though it doesn’t have the security light. Followed all the instructions and just made sure to leave the key in for 60 seconds. Now if I could just get the key fob to work outside of the truck.

[@LearnEnjoyRelax]

THANK YOU SO MUCH!!! Saving $300+ because of you !! 👏🏽👏🏽 more videos on 1999 Lexus Gs300’s please !! 🙏🏽

[@tianlaili5905]

Thank you uploader! The first part worked for my 2002 Lexus Rx 300. I have not tried the second part yet.

[@speedkar99]

+Tian Lai Li Glad it worked out for you.

[@uhhbirds8427]

I have the same car but cannot get it to work. How’d you get this to work?

[@greensky01]

Matthew Farmakis use the above link

[@uhhbirds8427]

greensky01 yea I tried that. Unfortunately those steps didn’t work for me either. Maybe it’s because I didn’t get the new key from a dealership. I had it cut from a local battery store.

[@greensky01]

Matthew Farmakis - I got my key cut from an eBay service. For the self programming you would have to have a working master key. It should not matter where you got the key cut as long as the key turns. Also make sure what key chip it is. Sometimes that does matter.

[@hayderalmumar4434]

Lexus dealership here in Arizona asked for $95 for cutting the key only without programming it

[@citylockapolytechnikeyllcc7936]

I get 250.00 and up for the remote head key ( NEW ONLY, not refurbbed ) AND programming, or two for 500.00 ( varies on some brand new vehicles ).. But the keys are cut by code, I supply the code number on the repair order, the PROX remotes come WITH the emergency key ...... may not be 30.00 off Ebay, but worth every penny for quality...... and a ncie savings over the dealer.

[@rushilkisoon]

Watching all your retrofit videos has me wanting to try retrofit this electric steering wheel… so fancy

[@cpenv]

Thank you for this video! Works on a 2001 Lexus LX470. This is the best DIY on KZbin.

[@speedkar99]

You are welcome

[@frederickdelacruz594]

This worked on a 1998 Land Cruiser! Thanks so much speedkar99! Liked and subscribed!

[@speedkar99]

+Frederick Dela Cruz thanks I'm glad it worked out for you and good to know it works on the land cruiser

[@robertroedl5772]

Purchased ignition cylinder from Pick A Parts with key and this worked perfect!!! 1998 Lexus es300.

[@speedkar99]

Glad it worked. Did you have to reprogram the key too?

[@user-pk7ct6sd1k]

I need help with this can I go to auto zone and get the Tumblr with the key will you think it will work have the same issue about to get rid of the car !!!!!! please get back to me !!!!! 😪

[@johnnietodd8917]

I'm having same problem help please ​@@user-pk7ct6sd1k

[@snowwotnosnow]

98 LS400 UCF20 Programming the immobiliser (first part of video) worked a treat - thank you!

[@speedkar99]

+snowwotnosnow glad it helped and good to know it works on the LS

[@raulcubias6513]

Setting up my new aftermarket control was successful on my GS 300.

[@speedkar99]

Cool. What year?

[@chevyc1094]

I appreciate you posting the video. I've got the starting part to work but can't get the doors to lock and unlock.. 😔😔

[@greensky01]

Use this website: www.keyfobprogram.com/2003-lexus-es300-remote-programming/

[@greensky01]

2003 Lexus ES300 Remote Programming Have all transmitters for the vehicle at hand 1. With the key out of the ignition, unlock and open drivers door (all other doors must be closed) 2. Within 5 seconds, Insert the key into the ignition (Do NOT Turn it) and Pull key out. Insert the key into the ignition (Do NOT Turn it) and Pull key out. 3. Within 40 seconds, Close then open the drivers door. Close then open the drivers door. Insert the key into the ignition (Do NOT Turn it) and Pull key out. 4. Within 40 seconds. Close then open the drivers door. Close then open the drivers door. Insert the key into ignition and leave it in the ignition. Close the drivers door. Turn the ignition to ON then back to OFF (Do NOT Start or crank engine). Remove the key from the ignition. 5. Within 3 seconds, the power door locks should lock then unlock automatically indicating successful entry into programming mode. Return to step 1 if the door locks do not cycle at this point or try the alternate procedure listed below. 6. Within 40 second, A. Press the lock and unlock buttons on the remote simultaneously for 1.5 seconds. B. Immediately after letting go of the lock and unlock buttons, press and hold the lock button by itself. Within 10 seconds, the door locks should lock and then unlock once indicating successful programming. (If the door locks cycle twice, repeat steps A and B in step 6 as the remote was not accepted) Repeat steps A and B in step 6 for each new remote. 7. Open drivers door.

[@foilcap]

Thank you. The best instructions for Lexus RX300 2002. Used for aftermarket flip key from eBay.

[@speedkar99]

Good to know it works

[@writercord1]

Brother, just want to thank you for this video. You saved me a lot of money.

[@YAT1997]

So I was able to program the key to start the car but now I’m having trouble programming the keyless entry. I can get the car to enter programming mode but still my key can’t just pair. Is it the key?

[@speedkar99]

Worn lock actuators

[@193322009]

speddkar99, Thank you so much for putting this video up for viewing. I made an appointment with the local Lexus dealer and the service guy said it will probably take about 1 1/2 hours to program my spare key. At their rate, that would have cost me about $165.00! It took me 5 minutes to do it. You, good sir, just saved me that amount. Thank you VERY much.

[@speedkar99]

+Mr.CaliforniaBob I'm glad you enjoyed my video and saved money. Thanks!

[@chriskathol]

what a scam, just like everything automotive, especially at dealerships. Guy in the video did it in less than 5 minutes and they want to charge 1.5 hours labour.

[@01clemente]

Does this work for 2005 Lexus RX 330. ?

[@joserebollar1985]

Mr.CaliforniaBob which lexus did you program?

[@peppy222222]

Perfect solution for the 2001 Toyota Avalon. Both worked exactly as you demonstrated. Many Thanks!!!

[@speedkar99]

Glad it worked

[@tonyzh3196]

Thank you very much! It's great! I got my remote back after following the program.

[@Conker999]

I was working on my 99 SC300 the other day and afterwards went to start it. It started up perfectly normal for a couple seconds then all of a sudden all dash lights appeared windshield wipers came on etc. So I shut it off. I tried turning it on again but no lights came on in the cluster and I didn't turn over at all. So I'm hoping I some how triggered my security immobilizer and not something worse electronic related. Wish me luck when I try this tomorrow.

[@alvinleandro5794]

you all prolly dont care but does anyone know of a trick to log back into an instagram account?? I was stupid lost my account password. I love any tips you can give me

[@donaldcasey1080]

@Alvin Leandro instablaster ;)

[@alvinleandro5794]

@Donald Casey Thanks so much for your reply. I found the site thru google and I'm trying it out now. Seems to take a while so I will reply here later when my account password hopefully is recovered.

[@alvinleandro5794]

@Donald Casey it worked and I finally got access to my account again. I'm so happy! Thanks so much you saved my account :D

[@donaldcasey1080]

@Alvin Leandro No problem :)

[@JJ-rd2ef]

How can i reprogram a key if i lost the master key? Same Lexus gs 300

[@Singleturbo-sk9qp]

Same

[@jd6049]

Had a key cut at a hardware store, it fits into the car, and I did the steps to program it. Security light turned off but it won't turn...what am I doing wrong? (2001 Lexus ES 300)

[@GeoMo52]

Excellent video, concise and to the point, easy to follow instructions

[@typesgsr]

This is a great video. I have a 2001 IS300 which I bought used and came with only a valet key. I ended up using a locksmith to use the new master key I bought from Ebay just like the one in this video. It was a success and the car starts.. But for months I've tried to program my remote to be able to have keyless entry and I can't get it to work. I don't know if it's my timing or what. When I use the unlock/lock switch it starts to slow down and die during the second set of cycling and eventually stop. As it's slowing down all the lock stop moving but you can still hear the weak sound of the switch. Do you have any suggestions? Please please please help. As I want this function to work. Please and thank you in advance.

[@speedkar99]

+Gam Bini Your lock actuators are dying. Try manually cycling the locks instead.

[@aizayahhills]

Did u use the valet key as a master key? I only have a valet key to do the programming so hopefully it works.

[@robertrukidding3055]

Great video! Can you recommend the eBay vendor that you purchased your key blank and fob from? Thanks!

[@greensky01]

www.ebay.com/itm/163152379523. Make sure it works with your model and chip (C4 vs D4)

[@tumblerule4702]

What if you not have original key?

[@vinniller2]

I'm not sure why but everything worked as specified except after doing the door sequences when I inserted the key to the on position only once it didn't work. I had to turn the key to the on position twice and then the locks cycled. The rest was the same as your video which was excellent. Thanks.

[@aionyxweatherspoon3696]

Love this video thank you so much I just skipped on paying Lexus $400

[@speedkar99]

Glad it helped

[@Векторкачества]

You are the Best! I wish you good luck!

[@speedkar99]

Thanks

[@adamo36532]

Dude its not working on my lexus es 330 2004. Any advice? I programmed the beep unlock but not the thing that let's it start

[@essadossary3723]

My car is a Lexus 2002 RX300. The second step was also completed and now I can use the Remote to Lock and Lock my Car. Thanks again for the Video. EJ Dossary, EE

[@speedkar99]

Glad you enjoyed it

[@shampton1]

Thank you easy great tutorial

[@Flowers.photoss_]

what key on amazon should i buy to do this to my 98 lexus es 300

[@trueshot2k420]

Same

[@mozymi4399]

Hi. Thanks for the video. Managed to get the first part to work, but not sure why I can't get the remote to work. I get the car ready for programming but won't accept key when I press the lock unlock. Any ideas?

[@casmediazw7746]

Does this programming work for Lexus only or ?

[@krzysztofk.1787]

This works with lexus LS 400 1997 , thank you

[@speedkar99]

+Krzysztof K. Good to know thanks

[@BadaBing.UCF30]

Did you do it with the newer key model? I also have a 1997 LS400 and I wanted something different from the 4runner fob.

[@erickdelsite]

I have a 99 GS300 and followed the directions exactly and it didn't work. Tried if several times just to be sure. Do you know if there's a difference procedure for an older Lexus?

[@speedkar99]

+Erick Delsite If your lock actuators are busted youll have to cycle the lock manually.

[@rockycook6367]

Did it work after u fixed the accuator

[@Dappercristian]

@@speedkar99 cycle each lock on each door manually?

[@adamgutierrez6408]

Thank you this worked on my 2000 Lexus ES300 key fob .Great video👍

[@Batitoh]

My eBay 17$ complete key work Incase you guys was wondering. Key was about 4mm longer then the factory one but it still works. I also have 4keys program to the car to bust the 3key myth I’m hearing

[@speedkar99]

+bentley sayachack Great, yes these keys are hit and miss, some work great, others not so good.

[@smer7902]

Will you work on the Lexus LS 4001998?

[@wholeNwon]

I did mine long ago but don't remember whether the sequence was exactly the same. Can order the keys already cut.

[@samuelcaballero1681]

Sameeeee

[@PureQ50]

I have a 1997 SC400 will this work? I noticed in 98 is when they changed the key wondering if that's the beginning of this procedure.

[@mr.sauced3996]

I have one too did u ever find out ?

[@PureQ50]

Mr.Sauced yea 1997 was the one year that this doesn’t work. 98+ it’ll work for The SC

[@dlee6985]

I saw a Bentley style flip key mod for the Lexus keys on a Lexus GS page and they linked your vids if customers needed reprogramming. It looks like a cool little upgrade/update. You should purchase one and do a vid on it. If you approved, I'd probably pick one up. They say you lose the ability to open the windows when you hold down the unlock button on the key and I think reprogram something to retain the trunk release function. I bet you could address those issues. Great channel btw. Obviously a very smart dude. Subscribed.

[@speedkar99]

Thanks for the feedback. You need to program both the remote and the immobilizer key for it to work properly. Since the flip keys use the same electronics (you transfer the guts over) I don't see how it would be different than a regular key. The key in this video was an aftermarket key and it had no problem winding down the windows and opening the trunk.

[@cameron._.brooking]

What is defined as a master key? My car came with a cheap knock off key that starts the car but the lock buttons can’t be programmed. Thanks for the great video!

[@OffrulleR]

This works with Lexus IS300! Tested!

[@speedkar99]

+OffrulleR yes it should glad it worked

[@herudaking370]

i dont see any replacement keys on ebay though, but good video

[@tonidinse1722]

OffrulleR hi ,i tried it on my altezza rs200 ,and it doesn't worked that way :/

[@ironbaby12]

OffrulleR did you get your replacement (blank) key at a locksmith or Lexus dealer?

[@OffrulleR]

SomethingGary on eBay.com

[@SK4869]

oh wow i really love that steering wheel moving wish my Toyota did that. good job. :)

[@speedkar99]

+SK4869 Hate that steering wheel, so annoying every time you put the key in.

[@SK4869]

haha i knew you would say that. ;)

[@EvendimataE]

+speedkar99 do you have to wait for the steering cycle to complete before you could drive the car? sometimes when i am really in a hurry i just start shift and drive. i know its not right but sometimes i really have to do it :D

[@speedkar99]

No, I just start it and drive, its still mechanically linked so it should still turn the wheels no matter the position of the steering wheel. But if you're smart about it, you could start the car, put on your seat belt, pop it in gear, turn on the stereo and by that time the steering should have adjusted before pulling off.

[@JDC_Portraits]

+SK4869 MY MOTOR BURNT OUT so now it wont move :( and to repair the motor you have to repair the whole steering column which cost $1500 just motor..

[@alwaysiyi272]

Hey awesome video, do you think this would on a 2005 Lexus ES330, I know the pedal dance stopped working after some model years

[@BetrayB3]

I would love to figure this out. I can't program the key as it's failing to go into programing mode after the pedals and removing key.

[@1955rauf]

Whatever you are so nice speaking clear English & word to word you make clear as “ master key now nee key” I do like your procedure & speech V good Raj London Uk 🇬🇧

[@VuNguyen-9.]

Awesome video!! You made Barney style easy thanks man!!

[@speedkar99]

Barney!

[@thefleaflop]

thanks for the videos,... helped a bunch!!!

[@BingSway]

How fast is the security light suppose to blink during programming? Can’t really see it in the video and I’m not having luck programming a new key.

[@timzimmermann5249]

Hi, my keys battery was empty for about half a year and now with a new battery the remote works (blinking led) but it doesn't lock or unlock the car. So I tried your method to reconnect the remote. It accepted the key but it still doesn't work. Do you got any idea what I can do?

[@essadossary3723]

speedkar99, Thank you for the video. I programmed my new Key to do the first step, starting the car. The car accepted the new key. I will be working on the second half of the video to program the Remote. Wish me luck. EJDossary

[@speedkar99]

Glad it helped. What car?

[@spencediggz1]

where you all been when i had all these gs woes?

[@speedkar99]

+spencediggz1 Heh. My brother's car, just got it 3 months ago. What GS do you have?

[@spencediggz1]

GS300 check mt channel sir

[@arjaydino6286]

I converted my is300 auto to a manual.. I do have the manual ecu.. can i just swap the ecu and do this to my master key?

[@shnuzi9280]

Im wondering the same thing im in the same position here, let me know if u find anything out

[@swagteam121]

Worked Perfectly 2000 Lexus ES300

[@speedkar99]

Good to know

[@briancasimiro7249]

Thanks man!

[@speedkar99]

+Brian Casimiro Your welcome

[@theresavong2359]

Thank you for the video. Great video.

[@speedkar99]

You are welcome

[@zeez88]

This guy makes shit look soo easy

[@speedkar99]

Hey this isn't so bad

[@LifeOWrylee]

Great video! Thank you!! Question: When you follow these reprogramming steps, will the old key(s) still work? Or do these steps somehow change the car’s programming so the old key(s) are inoperable?

[@speedkar99]

It should

[@andyvalenzuela9763]

Holy Jesus! 😄 Awesome

[@speedkar99]

Thanks!!

[@kimohoganesq]

"Sweet" Bro !!!!! Many Thanks !!!! :)

[@speedkar99]

You are welcome glad it could help

[@zelateurombolondona6084]

Hello I bought my car at auction (03 Lexus GS 430)and I only have ONE key ( don't know if it is a master key or not) when I enter the key in the ignition, the security light doesn't go off and when I turn on start,the car crank but won't start. The remote doesn't work.Can you please help me start my car??

[@speedkar99]

See my immobilizer hacking video on speedkar100 channel

[@amyroseblazethecat8807]

speedkar99 I can key programming on 2007 Lexus Lx470 V8 now is working in Chip went security Is Stop Linking

[@MightbeAmechanic]

Can you program a key to the central locking but not program it to immobilize so it will lock and unlock the car but not start it

[@Rivercifer]

Did not work on 03 gs300. Is there another procedure? Did this step by step to your vid.

[@speedkar99]

See my techstream video

[@GaudierOps1]

Security light doesn’t stop blinking after a couple minutes. What could cause that?

[@speedkar99]

Your key is not valid, or the sensing ring is

[@primoleone8050]

hi thanks for the vid. I haven't lost my keys but my car wont start periodically and I have to keep the key in the on position for 6 min before I can start the car to reset the immobilizer . how can I fix this so I won't have to keep delaying my life to start my car?

[@djthrillersean]

So I got it to start car and lock car won’t pop trunk and unlock, any suggestions?

[@wilsonfinlayson]

Cool...but I have a 2007 Scion TC that doesn't want to beep when using the remote...can this be solved?

[@speedkar99]

There's sometimes a dial to adjust the volume under the dash of some Toyota

[@debrawalker3718]

Help my 2009 Toyota Highlander Hybrid does not have an ignition switch there's no place to put a key it came with only a fob how do I program it without putting something in negation that doesn't exist help

[@speedkar99]

You need techstream.

[@ruppyrapheal3585]

It work perfect dude !! 100% up and running again. THANKS A MILLION !! Owe you one !!

[@I.S_Lombrana]

For those of you who can't do the keyless entry step outside, lock and unlock the door with the key not the button and boom should work

[@bagginn]

Will try this, thanks

[@ShadowtheRotarygod]

I just got a 98 GS300 with only 1 masterkey. It works fine and I don't make a habit of losing keys but I'd like a spare just in case. I called a local locksmith and he told me the 98's are a nightmare to copy a key for and that if I buy an ebay key and try it like you did there is a really good chance I'll actually "brick" the ecu and likely end up dumping the car in a junkyard since having it all fixed properly would likely cost more than the car is worth. You definitely make this look super easy and I kinda feel like he was blowing smoke up my rear but I'm honestly not super well versed on these chip keys. I like my old cars that you can hit with a rock to start it. So he did effectively spook me some. The only reason I give him any credit is he didn't want to do it for me and referred me to another local place who basically told me the same thing. Do you think he was full of it? He said lexus did this to make it so you HAD to take it to them and spend a lot of money which really doesn't make sense because the kind of folks that bought these cars usually only keep them a few years and dump them anyway. Ultimately I'd rather just disable the transponder and remove it all outright so the car can just be easier to work with but if it keeps working I guess I can leave it alone. Have you ever heard of anyone "bricking" their ecu this way? I have a hard time believing toyota would design a system that was that easy to ruin.

[@speedkar99]

+ShadowtheRotarygod Maybe they misunderstood that you have a master key, with that you can program additional keys. If you only had a valet key, then yea your dealer-bound. If you want to disable it, take the chip out of the key and mount it to the key receptor. Then make as many spare keys as you want.

[@ShadowtheRotarygod]

Thanks for the reply. That might be what he was thinking. I ordered the key and I'll be trying this when it shows up. You have a lot of awesome tech here. Keep up the good work!

[@ShadowtheRotarygod]

Just wanted to revisit this. I did buy an eBay key, had it cut and with a bit of an accelerated heart rate gave this a go. Success! New key works exactly like the old one! Thanks a million Speedkar!

[@leonidtsipan8593]

worked on LS400 year of 2000, great video

[@speedkar99]

+leonid tsipan that's a good car

[@Ru_90]

So I was looking at my rear passenger doors and realized that the actuator on them mite also be messed up. Could this be a problem when programming a remote

[@olivertwist9628]

It didn't work for my 2000 Lexus LS400 I've tried numerous times. I think it possibly could be because my passenger side rear lock doesn't unlock with the automatic button?

[@nathanielguzman5705]

Awesome video, worked for my 2000 Lexus ES300. Thank you!

[@teresamcclain3409]

Hi I also have this car same year make and model but I don’t have the master key I bought a key on eBay but how to I find the code for it to be cut to size? Thank you

[@mackjon3z]

@@teresamcclain3409 did you ever solve your issue. i also have same yr\mdl lost master key & im trying to program ebay key. did yours work for you?

[@Miguel-dl3pp]

will it not work if my passanger side door lock doesnt lock or unlock w the master lock buttons?

[@ratipati2007]

My car is 2003 Toyota Avalon XLS. I was told this model is Lexus in disguise (do not know which model of Lexus). I have only one working key. It does not have a dot punch (it is not master key I believe) and do not know this slave key can be used for this method. I need another replacement key programmed using this non-dot slave key. Will your method works on my car? Thanks

[@speedkar99]

It'll work if your original is a master. Put key in ignition. If immobilizer light stops blinking immediately then it's a master. If it takes 2 seconds to stop blinking then it's a valet and you'll have to virginize the ECU.

[@mohammedshaffi4922]

Hi. Is it the same procedure for a 1996 lexus ls400. I don't have old fob just key to unlock doors manually. Can I programme a used fob key to my car. Thanks

[@speedkar99]

Yes

[@lambert2000]

Where is your video " teachstream program?

[@kennysmith6824]

Works great on our 2003 es300. Thanks for the video.

[@Amanda-cd6dm]

I have a 2000 model lexus es300. Is there any tricks or hacks because i removed some fuses to check if they were blown and the battery kept draining dead in like 2 mins after the car was off and now it won't do shit when i try to crank it. It does nothing. ANY SUGGESTIONS WOULD BE GREATLY APPRECIATED

[@nigel0075]

Thanks for your post I really appreciate it. I program my keys and was able to start the car but I was unable to program the key fob. I completed the procedure, the car goes into programming mode but at the end it did not work. Please help

[@Doobiez561]

Hey, I recently lost my only car key with a chip (Master Key).... If I buy a new key and get it cut, can I still program it to start the car without the Master Key actually present?? Hoping I don't have to go to lexus to have a whole new reprogram, incase I find my old (Master Key)..... My car is still programmed to this Key that is lost...

[@speedkar99]

You need a master key to program new keys or you'll have to hack the Immobilizer and clear it

[@EaglesNation24]

I tried to program the remote. It does all of the steps when done including the last step when I hit the lock button on the key remote, but after that it doesn’t respond to the remote

[@speedkar99]

Checked the battery in the remote? Are you trying to unlock it with the key ignition or door open?

[@EaglesNation24]

@@speedkar99so weird. Not sure what happened but it works now. Also weird, I gave the key to valet, and after getting the car back, key fob wouldn’t work. But after driving and turning off the car, and opening the door and hitting the lock button on the fob, it worked again. I feel like my car is always in programming mode or something because it works/doesn’t work after a certain sequence of events (maybe opening the door and then hitting a button while the door is still open 🤷🏻‍♂️).

[@Angeliino]

Thank you so much!!!! Worked for my 2001 Lexus is300

[@speedkar99]

Glad to know it works