Speedway maintenance tips from ASH-TECH

[@danbewleyDITV]

Cheers for the bit on the floats, easier than looking on the pipe

[@ashtechltd]

Dan Bewley no probs Dan 👍🏻

[@adriannewman4624]

So proud of you mate

[@ashtechltd]

How have i only just seen this! how are ya mate? find me on FB... ashtechltd :)

[@markbryant8321]

Love it Ash mate nice one

[@arnebrat]

Thank you for good tips on how to mantaine The engine ! I have this Jawa 844-10 engine and I hope you can tell me where the oil filter is situated on this engine !

[@deanwormall]

More of the same please 🙏 👍👍

[@markpav9906]

Well said Sir

[@teamfourteenracing9023]

Which brand oil do you personally think is the best to use in GM engines?

[@j_356_5]

Hi Ash, might you be willing to do a video about jet selection and blixt tuning? Being in NC, USA away from the world after I made the jump over to it, I find this carb to be a pain in my butt and went back to my Bz.

[@chrispynov1963]

Jacek, Assuming its clean and your floats are set, start out with a 220 main, but it also depends on ambient temp and elevation. Did you run a Blixt in auburn ? As far as tuning, ask steve wells, he knows which direction is rich or lean on the little 2 mm or 2.5 mm allen head on the right side, i forgot. Chris P

[@j_356_5]

@@chrispynov1963 I sat down and figured out how the carb works and what works for me out here. thanks.

[@chrispynov1963]

@@j_356_5 you know who this is dont you ?

[@j_356_5]

@@chrispynov1963 nope im sorry i dont

[@chrispynov1963]

@@j_356_5 chris popanz

[@chrispynov1963]

21mm ? Better check again, more like 26.50 mm

[@ashtechltd]

If yours are 26.5 mm they are wrong and need to be adjusted.

[@chrispynov1963]

@@ashtechltd 21mm gets the fuel level at the top of the carb inlet. I've ran 25.75mm~26.75mm on a blixt for 3 yrs and it works for me. Wonder whats different between yours and mine ?