Turbo Timber EVO Mods and Tips - The description has links for additional detailed information.

[@alexross367]

I just purchased a new timber, the esc was positioned almost completely behind the battery tray, luckily I found your video after my second flight. Time to start 3d printing some cool vents!

[@GoofballFlyer]

Glad I could help

[@tughillrc6327]

Very well done video. I subscribed and shared your link around my clubs. We will try to get you to 1k just keep the well done Mod videos coming. Any RC aircraft that you may want to mod and why you did the mod is why I give this video ⭐⭐⭐⭐⭐

[@GoofballFlyer]

Many thanks!

[@CaringDental]

Thank you for a nice video. I'm getting ready to unbox my TT EVO and I was looking for tips.

[@GoofballFlyer]

You are welcome!

[@richardyoung17]

Excellent information and presentation. Thank you so much!

[@GoofballFlyer]

Glad you enjoyed it!

[@LouisBos]

Thank you for making this video! You had me unlock several capabilities I didn’t know about

[@GoofballFlyer]

Glad I could help!

[@325gman8]

Love your comment, bought a turbo timber evo because of your show. Please do a review on the super timber. Would love to see your likes and dislikes,and up grades. Thanks G Man

[@GoofballFlyer]

Planning on it after I get in a few flights,

[@reptilewizz]

awesome! I will be doing many of these fixes when I get mine this summer! thanks!

[@GoofballFlyer]

It's a great airplane, have fun!

[@rotorhead58d]

Some very helpful info and brilliant ideas. Thank you Sir!

[@GoofballFlyer]

Glad it was helpful!

[@OttoPilot190]

very useful and informative.. thank you

[@GoofballFlyer]

Glad it was helpful!

[@325gman8]

Thanks for cooling info.

[@GoofballFlyer]

Thanks for watching!

[@enjundoc]

Tom, Nice job on your videos! Does the rx need to be unlocked to work with the light module? Thanks and keep up the good work!!

[@GoofballFlyer]

An open receiver port (gear?) assigned to a 2 position switch (A?). No unlock needed. I have my bomb drop servo and lights on gear port and switch A on the Turbo Timber.

[@bigconman7740]

I just put my new TTE together, and have started programming my transmitter. I havent bound it, or set up the thrust reversing or anything yet, but I have the NX8+, basically your same transmitter, and Im wondering what you personally set your high, mid, and low rates and expos to. Thanks so much for making this awesome video, full of tips to protect and get the most out of my new baby!!! ***Update, I have bound my rx with my tx, set up thrust reverse, cleared out the cowl space, CA & hot glued where suggested, tied back the wires where suggested, Im about to upgrade to my oil filled shocks, and upgraded tires both from Kin Additive. I cant wait to fly this puppy. Im just stuck between putting on the slats and leaving them off...

[@GoofballFlyer]

My aileron rates are 100, 70, 50 expo 0 on all. You probably want some expo. Elevator 100, 85 75 no expo. Rudder 100 and 0. I you probaby should start with the instructions.

[@benjaminthebob1857]

Great video, I was wondering if you could go more in depth with the bomb drop system though I found it a bit confusing.

[@GoofballFlyer]

Sure. I fastened a servo with longish arm to the rear of the bottom fuselage vent. I used a 2-sided piece of servo tape. The servo is connected to the Gear port on an AR637T receiver and that is set to the A switch on my NX8. A in the up position (A-up) has the servo arm facing forward and just touching the vent. A in the down position (A-Down) has the servo arm pointing straight down. So to release the payload I just click A-Down. The payload has a string loop that goes on the arm with a loose fit. In the A-up position airflow prevents the payload from releasing. Works great. In addition I added an A-switch-change sound - "Bombs-Away" for A-(Down). The cost was $0. I had a salvaged servo on hand.

[@benjaminthebob1857]

Thanks!

[@Jebusisblatantidolatry]

Its a better setup if you use the 2 blade 13x4 prop and spinner used on the timber X. Less amp draw .

[@GoofballFlyer]

Thanks for the tip

[@Bonepractice]

Love the video BUT when I see someone use plyers on a hex nut I tend to question. My problem. There's still a lot of value though on Hoosiers videos.

[@GoofballFlyer]

It was what I had in the basement at the time!

[@SlowFlyer85]

Hi just received my TTE and I noticed you have the better Avian esc in it mine came with the smaller I call vinyl cover one did you upgrade the esc too Thanks good video

[@GoofballFlyer]

I did

[@SlowFlyer85]

@@GoofballFlyer thanks i proubley do the same

[@dronepilot260rc]

Another Hoosier I’m in Fort Wayne 🎉

[@GoofballFlyer]

Lots of us down here in the Indy area. 5 or 6 clubs. Any hobby shops in Fort Wayne?

[@bobd676]

I have recently encountered the GPS module SPMA95871- quit operating when I updated Receiver to 2.42.1 i think is the newest Firmware. HH has acknowleged it-working on it--3 weeks now --only on AR637T's. I have one on the 8channel receiver & it's ok. Any ideas ?

[@GoofballFlyer]

Thanks for that, I'll not be updating any of my 637 series any time soon!

[@StephenMurphy-e5f]

Hello, I have just came across exactly the same problem, tried it on Conscendo Evo and TT Evo both with BnF AR637TA's. The good folk at Spektrum/Logic UK are taking a look for me. All the best

[@davelaird6530]

Did you replace stock wheels/tires with Du-Bro SUPER LITE XL WHEELS?

[@GoofballFlyer]

Those are the wheels that came with the aircraft. They are Do-Bro Super Lite.

[@LoveRC]

How much do I need to drill out those tires?

[@GoofballFlyer]

Match a drill bit to the new axles

[@LoveRC]

@@GoofballFlyer oh yeah so stick one in the old tire hub.

[@jonestactical3268]

I think your thrust reverse is more harm to the motor mount than an unbalanced prop, IMHO.

[@GoofballFlyer]

Maybe, but no issues yet on any of my 10 models with reverse enabled.

[@patrickhoyle8357]

Nothing wrong with the original landing gear , just remove the internal hooks that stop the springs working

[@GoofballFlyer]

I mentioned that too, but I have seen those spring stretch out too.

[@patrickhoyle8357]

@GoofballFlyer I understand and agree, mine stretched on the outer coil, then settled and no more distortion after 100's of flights. Nothing to lose by trying

[@barleyhopps]

Too many Reg, in R/C. The fun is gone.

[@GoofballFlyer]

I have always been an AMA member and flown at a club. Nothing has changed much for me, but I can see your point if your situation is different.