Spektrum NX Setup: Top 5 Most Requested Settings Changes (NX6/NX8/NX10)

[@twodogsdave66]

Woohoo! My favorite NX instructor lives in Tennessee! I'm moving to the eastern part of the state in March. Love these videos!

[@BDTennessee]

What area? Im in knoxville :)

[@066motocross]

Your helping a retired 58 year old semi truck driver understand very complicated things. Thanks so much

[@BDTennessee]

Glad to hear! Thanks for watching!

[@carlfulton7582]

BD you're a life saver! I'm new to flying RC, but flew a bunch in Vietnam. Your "classes" are the best.

[@BDTennessee]

I appreciate the good words Carl,Thanks!

[@Truthstillmatters2]

When I click on next, I don’t get extra settings. I get the option to calibrate my sticks….

[@ChristopherPolcyn-i8p]

What are your color palette settings? Love the blue and green

[@waynemiller6070]

Thank you! You've helped me make the best radio I've ever had less annoying. Lol

[@BDTennessee]

Good to hear haha!

[@michaelrouser5730]

Another excellent video BD. Those beeps are annoying at time. Keep those video coming.

[@BDTennessee]

I agree,first thing i do :D Thanks for positive support

[@okiedoak201]

Woohoo....awesome stuff...is there a way to turn on/off the lights on a eflite cherokee?

[@BDTennessee]

Light are used with always on source.

[@matthewcharlton8871]

Love your videos, very helpful mate, I've just got my new nx8, I love it but every time I set a new model up it's all good, when I turn it off and on again all my settings have gone? Any help appreciated? Chrers

[@rafaeltorres2886]

Thank you for us newbies.💖

[@BDTennessee]

Thanks Rafael!

[@Mountian-Zen]

Your Spektrum transmitter tutorials are outstanding they have helped me a lot. Thanks much for you effort sharing. Question if I may. So the A/C elevator, rudder and ailerons have been trimmed for flight. Is there a way / how does one readjust so the display screen trim indicators at Zero? Or do you have to set display trim to zero and physically go back and readjust the flight control surfaces accordingly? Thank you in advance!

[@BDTennessee]

Move trims over to subtrim or manually adjust linkages on plane. I would do manual adjustment on plane so you dont potentially have issues receiver settings (ie AS3X etc)... Measure center point to controls. Zero out trims. Manauuly adjust linkages to get to previous points.

[@Mountian-Zen]

@@BDTennessee understand thank you sir

[@BDTennessee]

@@Mountian-Zen anytime :)

[@eliocarballo9113]

Yes of course I learned some. I was able to turn off some bib sounds I did not want😊

[@BDTennessee]

Elio! 😁

[@itrkaki]

i love your color setup on the screen,can you tell how you got it like that!?

[@BDTennessee]

Custom changed in pallette settings. Colors i liked and work good together.

[@brianchamberlain9630]

Love your helpful Videos! Just received a new NX6 and the voice playback is very garbled, have you or anyone here heard of this problem?

[@BDTennessee]

Thanks Brian! Voice playback does have some sound quality issues sometimes. I keep mine on 90% and dont really notice after awhile of using.

[@larryhawkes1347]

Is there a way to display ESC telemetry Voltage on the main screen of the NX series, it would be nice to have have the ESC voltage along with the timer on the main screen.

[@BDTennessee]

Not currently.Maybe something they can do in future updates.

[@larryhawkes1347]

Thanks, I appreciate the reply.

[@larryhawkes1347]

Hey BD, so I found the answer to my question above when I watched your other video last night about Telemetry and ticker tapes and I found that I can display the ESC voltage on the main screen via the ticker tape, so thanks for all the great content you put out I really appreciate it. Larry

[@BDTennessee]

@@larryhawkes1347 awesome! Glad video helped :)

[@coolbreazmike]

Hey BD what are the sliders for on the back of the NX10 mine will arrive in a few days

[@BDTennessee]

Can be assigned for different stuff. Anything you want slider adjustable.

[@onapproachrc5471]

I have a question on my NX8 how do I set up to have my display screen to stay lit up for the duration of my flight instead of dimming out on me ?

[@BDTennessee]

Change 2 at :54 seconds into video...

[@onapproachrc5471]

@@BDTennessee I don't know how I missed that but I sure did I greatly appreciate your assistance as always thank you so much Happy Flying 😊

[@BDTennessee]

@@onapproachrc5471 anytime my friend!

[@hamradioqrp-k0klb]

Excellent.. thx for sharing.

[@emsenjansgasten]

Is it possible to repeat the voice every 2 secondes when a switch is changed.I always forget to set the flaps to normal mode

[@BDTennessee]

You could put it on a switch request report. Another option is to use a flight mode on power up so it makes you move to default and wont be calling it out every 2 seconds.

[@billpennymcnally226]

Thank you, BD just a question when I turn on the Transmitter it says transmitter low voltage but the battery is fully charged can you do a video on this or maybe give me some suggestions on how to fix this cheers Bill

[@BDTennessee]

System Setup > System Settings > Make sure Battery is LiIon and Alarm is 3.5v

[@billpennymcnally226]

@@BDTennessee Thank you, BD

[@chadbobby]

Hey BD, I love your content! I just moved to Paris TN not long ago and don't have anyone to fly with or learn from. Mind if I ask what part of TN you're from? Could you help a newbie figure out a few issues with my first PNP Turbo Timber Evolution...?

[@BDTennessee]

Im in East TN... PM me on Facebook...

[@robertwren2289]

Thank you very Much!

[@BDTennessee]

Your welcome,thanks for watching!

[@TheFlagInspector]

after upgrading to the 4.0 firmware, the Extra Settings are not there anymore and i can't find them. Any one know how to turn on/off roller sounds now?

[@islandrc-duke1972]

cool video and settings

[@BDTennessee]

Thanks Duke for watching!

[@brucepearson6322]

BD, can you help get 6 channel setup for non motor glider?! Having trouble with new NX8 accepting 6 ch for sailplane. Thanks, B

[@BDTennessee]

Does it not allow 6 channels using sailplane or whats issue?

[@brucepearson6322]

@@BDTennessee I never see the flap setup option. We have tried every config we can think of.

[@brucepearson6322]

2aileron 2flap standard tail

[@BDTennessee]

@@brucepearson6322 go to system settings > Model Type > Use the Airplane > Then use 2 Ail 2 Flap

[@brucepearson6322]

@@BDTennessee ok, thats what we had to do with the ASW 28. Seems to me 2x2x2 for glider is a common setup and should be in glider mode. Thanks BD!

[@reckemroysrc3764]

When I get annoyed with it now I know how to turn them off. Thanks BD👊👊👊😎✌👍

[@BDTennessee]

Heard that! Thanks for watching ReckemRoy!

[@tughillrc6327]

Jedi Master BD Tennessee Thank You for the Tips ✔👌

[@BDTennessee]

Thanks Tughill :)

[@sophiejaysstuff4026]

Thanks

[@BDTennessee]

Thanks for watching :)

[@natal777]

Thank you much ! The manual is useless it says nothing about sounds at all 👍👍👌👌👍👍

[@BDTennessee]

Appreciate you John!

[@cgcgcg69]

Great

[@BDTennessee]

Thanks CG!

[@jimmyhaley727]

BD,, my setup on my corsair needs help,, lights and gear covers wont work,, mains come down and try to go up but the covers dont open,, any help for this ole fart would be greatly appreciated,,, jimmy

[@BDTennessee]

You need to have the gear doors on a sequencer plugged in or program into radio. Lights are powered by a open channel or bind port works too.

[@jcb6713]

good tips...

[@BDTennessee]

Thanks JCB!

[@robertwren2289]

Wgat gets me is, you have to do this for each plane. uhg

[@BDTennessee]

Timer yes.Which is reason i make custom templates. (Tutorial on the channel) System settings stuff only once and works for other models.

[@brianwood4170]

When I go to the “more” section to turn off scroll sound it is a stick calibration page? Nothing about sounds at all. Any pointers? Maybe the OS is updated.

[@rivertranced]

I had the same issue. Found it under Preferences > Next > System Sounds. It is no longer under system settings