How To Install New Rage Cycles Yamaha R7 Fender Eliminators

[@mariusmuranyi4941]

tremendous help for anyone that is planning on switching out the hideous stock flickers and dont know how to go on about it.Thank you for taking the time sir.

[@sportbiketrackgear]

You are welcome and thank you for watching! - Van

[@gp8721]

Thanks so much for the in depth vid. This is the first time I’ve done work involving removing and fairings/cowling, and everything went very smoothly. Mine is a 2023 R7 but everything was exactly the same as in your video. Couldn’t have done it without ya! Hope to see y’all do more with this bike!

[@sportbiketrackgear]

Happy to hear this was helpful and thank you for watching! - Van

[@michaelbroughton2207]

And again. Thanks for this one too! Doing my best to repay the benefit I’m getting from you guys. Placed a couple of orders recently. Checking your site first for everything.

[@sportbiketrackgear]

Thank you for watching and for your business! Happy to hear these have been helpful. - Van

[@kaithompson1058]

Very helpful video, just installed on my R7, followed step by step, and it went great. Thank you!

[@sportbiketrackgear]

You are welcome and thank you for watching! - Van

[@ethanbarrera3736]

Just an fyi, if your overthinking about the tucked and actually want the standard. Dont spend more money i actually just bent the metal frame a little outward and it works just as good

[@sportbiketrackgear]

Not a bad idea, thanks for sharing. - Van

[@luggZ]

I am panicking because I now have 2 of those push pin locks left over...

[@sportbiketrackgear]

No reason to panic, just double check your work and I am sure you will find where they belong. - Van

[@vincentkenton6064]

5 months late but I did the same. It’s the two under the tail light

[@delisha41510]

Fast and easy!!! Thanks for this video!! It was so helpful!! I was able to follow along step by step and completed it in less an hour!!

[@sportbiketrackgear]

You are welcome and thank you for watching! - Van

[@mariamaniscalco7413]

Great ez to follw instructions, my install went fast no problems. Thanks for the in depth video. Boston here.

[@sportbiketrackgear]

You are welcome and thank you for watching! - Van

[@Uneique1]

Fantastic video. I love the uncut video to show how it’s done

[@sportbiketrackgear]

You are welcome and thank you for watching! - Van

[@mikerowe4515]

This video is extremely helpful. Used it for the install on my R7.

[@sportbiketrackgear]

Happy to hear it was helpful and thank you for watching! - Van

[@Zayn_y]

Nice vid, Just finished but sadly lost one of the seat bolts !

[@sportbiketrackgear]

Nothing worse than losing fasteners. - Van

[@yugol.5812]

Man , i might have to invest in a new toy….. like a R7! lol. To follow this installation projects

[@sportbiketrackgear]

This is a great bike for sure. Thank you for watching! - Van

[@coin8299]

Is it normal to be left with one 4mm screw? I’m confused as I followed step by step. I’m thinking it may have come from the stock fender? Great video too, helped a lot!

[@terrichalaire3871]

This was amazing help. So accomplished. First bike project actually. 🎉 thanks again. And lol no parts leftover. FYI the one I got has a spacer I think goes between the turn signal bracket and the bike but wasn't sure if it went between the TS and plate. It seems seated ok above the TS. Different not the tucked style.

[@sportbiketrackgear]

Happy to hear this was helpful and thank you for watching! - Van

[@ColeC-jt5hb]

How did you go about getting the bolts that secure the fender? I know they have thread locker but I’m just not sure what type of thread locker. Do I need oil, alcohol, heat, etc.. to remove those bolts?

[@sportbiketrackgear]

No they should come out by using standard hand tools. - Van

[@Watah_nation671]

Just received mine. Look so clean.!. Fast shipping overseas. I do have a question, i have an aftermarket exhaust, KO lightning, as im wondering if i need to have it tuned?.

[@sportbiketrackgear]

If you are happy with the performance of the bike there is no need to get it tuned. We have run several bikes with aftermarket exhaust without tuning them and never had an issue. - Van

[@Watah_nation671]

@@sportbiketrackgear do you have any self tuning / plug and play on your website?.

[@marvinless]

just ordered, thanks for the video

[@sportbiketrackgear]

New Rage did a solid job with the R7. - Van

[@MrBassman313]

Super clean install!

[@sportbiketrackgear]

Thanks for watching! - Van

[@oscartorres2564]

thanks for the video, install was super smooth, i had to re order because my left light wasn’t turning on, possibly faulty?

[@sportbiketrackgear]

Sorry to hear you had an issue and happy the install video was helpful. - Van

[@callzx4243]

Hey man I did everything exactly how you did and tested the lights while installing. Both my turn signals on the front and rear arent working. No turn signal on the dash is showing, my horn is not working and neither are my headlights. Do you know what I could do?

[@savageogoe4926]

Maybe check to make sure you didn’t blow any fuses. Sounds like what happened to me when installing front turn signals.

[@ronshahbazi2001]

Did you use the dual load equalizer?

[@sportbiketrackgear]

Proper flash speed; no additional modules required. - Van

[@terrichalaire3871]

THANK YOU!!! Couldn't wait to get that ugly off!!

[@sportbiketrackgear]

For sure the OEM rear fender is horrible. - Van

[@maya00795]

Awesome buddy...... Greetings from india 🤘🏻🙌🏻🙌🏻🤠

[@sportbiketrackgear]

Thank you for watching! - Van

[@maya00795]

@@sportbiketrackgear welcome buddy 😊

[@itz_metriq]

I love this bike

[@sportbiketrackgear]

We are excited to get this bike on the track this season for sure. - Van

[@ItsJayZone]

What if I don’t have spinner T handle what can I use?

[@sportbiketrackgear]

Any other common hand tool of the same size would work. - Van

[@51mauritz]

does a german liscense plate fit?

[@sportbiketrackgear]

No idea I am in the US bro. - Van

[@FREE_PUREBLOOD333]

Yay!!! First up.. 🇬🇧🏍️💨👍

[@sportbiketrackgear]

Thanks for watching! - Van

[@muskls6877]

Wtf is that bracket? That didn't come with the mount

[@sportbiketrackgear]

We show all of the pieces that are included with the kit before we start the install. If you got this from us and there is something missing please reach out to the team on [e-mail] and they will help you get this sorted out. - Van

[@muskls6877]

@@sportbiketrackgear thanks van, I simply made the mistake of buying from Amazon

[@FreshRides]

Fender eliminators are always the biggest pain to install

[@WesleyNina-p3c]

Erwin Via