Yamaha R7 Yoshimura Fender Eliminator Kit How To Install | Sportbike Track Gear

[@johnathanfronebarger7163]

Followed this step by step and was able to get this installed no problem..the only to tools I did not have were the side cutters and no mechanical skills at all...thanks for the knowledge!!!

[@sportbiketrackgear]

You are welcome, happy to hear it was helpful. - Van

[@jeffh278]

The best build series on KZbin

[@sportbiketrackgear]

Thank you! - Van

[@Merdock-yp2xj]

Awesome video, thanks, just completed this going step by step. Took me 3.5 hours following along, tutorial was perfect. Only warning to others is don’t over tighten when attaching the Yosh kit back to the bike, I snapped a 8mm bolt. I’ll have to find where I can order one or a set of those but for now seems it will be fine since I used some blue lock

[@sportbiketrackgear]

Happy to hear this was helpful. If you are unsure of how much torque to use on a fastener and do not have a torque wrench try to get a feel for how tight the fastener was when you removed it and reproduce that when you reinstall it. - Van

[@evolutionsuper7363]

Awesome video. Helped a bunch installing this kit on my R7. Thank you!

[@sportbiketrackgear]

You are welcome and thank you for watching! - Van

[@noemadbeatz2773]

Love your how to vids! I’m about to put one of these on my 21 MT09.

[@sportbiketrackgear]

Thank you for watching and enjoy your new bike! - Van

[@juanespinoza4188]

This video helped to get mine done. Just toook my time and orginzing helped much more

[@robertkenney6002]

If you had to splice a wire do you need to unplug negative on battery?

[@maya00795]

Yoshimura fender eliminator kit...... superb.... buddy ❣️❣️❣️❣️❣️🤩🤩🤩🤩😘😘😘😘🤘🏻👍🏻

[@sportbiketrackgear]

Thanks for watching, I think Yoshimura did an amazing job with this kit! - Van

[@superbikesquadracer]

I cant stop laughing. "This nasty oem tail". I agree!!!!!!!!!!

[@sportbiketrackgear]

For sure the fender eliminator is one of the most important mods! - Van

[@KaliFlower666]

Is the Yoshimura frame required? I like their kit the most and eventually want the sequential signals, but dont care much for the frame itself. Would probably just roll no frame if workable or a simple black. And would this work for a 2024 R7? Im assuming the '23 & '24 are basically the same

[@sportbiketrackgear]

This will fit all years for the R7 and you can use it without the plate frame. - Van

[@KaliFlower666]

​@sportbiketrackgear Appreciate it! I got it nearly all installed but need to do the wiring still as I ran out of time. I'm looking at getting the plug-n-play adapters they have so I don't have to splice or cut anything. Tutorial definitely helped me getting the bike apart though!

[@samalbanna2654]

The pieces with 3 plastic clips. I need advice as on the clutch side the 3rd clip will not click into place. It will always pop out. I put this project on hold since I realized I might need a pair of hands. Any advice would be greatly appreciated. Happy 4th!

[@sportbiketrackgear]

I would make sure you have the panel properly aligned, odds are an edge is getting hung up. - Van

[@CRBDave]

Great video!

[@sportbiketrackgear]

Thank you for watching! - Van

[@grizzlyelchapo4219]

What's the tool called you use to pop rivets out? Would be a lifesaver!

[@sportbiketrackgear]

That is just a small pick with an angled tip. - Van

[@Nightfury.r7]

Can i use the original turn signals with this fender eliminator?

[@sportbiketrackgear]

Yes that is that we did with this install. - Van

[@1991CALYPSO]

Van, can you get Yosh to get this kit out for the '21- MT-07 already? My emails fall on deaf ears!

[@sportbiketrackgear]

I will shoot them a note. - Van

[@1991CALYPSO]

@@sportbiketrackgear 🥲

[@joemcmahon8103]

Wonder how many 2022 R7 buyers know about Sanford and Son. Funny shit.

[@sportbiketrackgear]

Now that is some good tv! - Van

[@rdboston7866]

Great videos

[@sportbiketrackgear]

Thank you for watching! - Van

[@NavdeepSingh-jw5ie]

Beautyfull nice and stylish bike

[@sportbiketrackgear]

Thanks for watching, we are pretty excited about this project. - Van

[@metalmavenmike80]

The link goes to the MT-9 ...... this right part?

[@sportbiketrackgear]

No, I have just edited the link. - Van

[@metalmavenmike80]

@@sportbiketrackgear awesome thanks Van!

[@Nightfury.r7]

Is this license plate adjustable?

[@sportbiketrackgear]

No the license plate is not adjustable. - Van

[@AndyMontes]

What is the red connector next to ECU ?

[@sportbiketrackgear]

Sorry I do not know off the top of my head and we are flying out to Laguna in the AM. - Van

[@darinabrahams7824]

Is this eliminator illegal??

[@sportbiketrackgear]

That depends on where you live. If you are concerned about it you should check. - Van

[@smokedshrek]

Why dont u just use wago? Much better than using heat. U Are damaging the cabel

[@sportbiketrackgear]

I have been doing this for over 30 years now. 100% what I showed works and will last. - Van