How to Install Woodcraft Rearsets on a Yamaha YZF-R3 15-17 from Sportbiketrackgear.com

How to Install Woodcraft Rearsets on a 15-17 Yamaha YZF-R3
www.sportbiketrackgear.com/wo...
The full rearset kit consists of the mounting plates, footpegs, brake and shift pedals with eccentric toe pegs and all of the needed hardware to install the kit properly, assuming that you have the OEM rearsets on the machine. (See our link to the Installation instructions below). These kits are made from tough, aircraft grade 6061 T6 Aluminum and anodized with a black finish. This kit has eccentric pegs that have 12 positions of adjustment. The eccentric toe pieces give also you 1/2" of adjustability in all directions to help you fine tune your lever position.
Woodcraft has tested these kits to get them in the perfect place for both the street or the track. The range of adjustment 1" to 2" above and 3/4" to 1 1/2" back from the OEM position. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd. This kit can be used in either standard or GP shift position with a shift rod change. Watch as Van goes into further detail in this Rearset install from Woodcraft.
If you feel uncomfortable with this modification please take your bike to a licensed motorcycle mechanic. Stay tuned for more installation videos!
The tools seen in this video can be found at www.sportbiketrackgear.com/tools
You can view more motorcycle maintenance videos at • General Motorcycle Mai...
You can view more YZF-R3 videos at • 2015-2018 Yamaha R3 ST...
Sportbike Track Gear is the #1 online eCommerce site for protective motorcycle apparel and performance parts. Buy popular brand name motorcycle helmets, riding gear, tires and parts at SportbikeTrackGear.com today! If you have any further questions call 888.784.4327, send an email to [e-mail] or leave a comment. Don't forget to subscribe!

[@cedrickroberson1017]

You have no idea how much your videos help me out alot

[@JohnnyDeGirolamo]

Thank you STG! Just got done installing these and wow. All I was expecting was a batter position and an aesthetically good looking piece, but they change the whole way the bike shifts. I feel like I'm shifting in milliseconds like butter now! Just ordered a Rear Ohlins shock from you guys' as well, can't wait to pair the two :)

[@3113adman]

you've made me a better,more confident wrencher. Taking the hobby to the next level! Thanks VAN!

[@bobby3914]

Great tutorial, helped me install my woodcraft gp rearsets on my triumph Daytona 675. Woodcraft top quality stuff. You guys make great videos as well as sell great motorcycle parts

[@jaradgallagher5975]

Thank you!! Great video

[@TheManic.5-OH]

Hi, I'm Brian Vin Diesel 😎🤟🏽 dude you don't even need a Halloween costume 🤣 Thanks again for all the amazing videos!

[@JamieS1992]

had to put a hold in changing my rearsets I just tired and the bolts holding the master cylinder are stuck on there to the point the allen key is eating the bolts going to have to go to a mechanic and see if they can drill them out for me and do it

[@kimberlyj.397]

Did you use the oem brake light switch and return spring?

[@unique_pnoy355]

will you do a frame slider video on the r3

[@yamyam4655]

what's up STG! Greeeeat channel, really enjoy your videos!

[@jtlee8925]

Please add video yamaha r3 rear brake caliper rebuilding, or cleaning...

[@PaulorhSilva]

+Sportbike Track Gear, I have a little doubt offtopic. Could the R3 benefict if i lower the handlebar on the suspension in 1 cm? (sorry i don't know how to convert to inches)

[@hullkid23]

Curious what brand of waterproof grease that is you used in this install video?

[@bryvenzchannel7467]

the rearset relocation brackets is ok to use for the woodcraft rearsets?

[@shahrolnobly9927]

could you do a rearsets video on mt09

[@16marlynmagdaraog99]

hey body do have for suzuki raider150.?

[@williamwallace6434]

Can I install a phone holder on the R3 and if so where would it be able to go

[@davidpenaflor8494]

Are these the best on the market?

[@goosetavio]

is it mandatory to put the heel guards back on? or is it safe to not use them. i hate the look

[@Ajeythayaparan]

Do you not have to bleed the brakes with these?