This is a great example that shows where the limits of Maxamet are. Fantastic for normal EDC use, but not really for hard use or abuse.
@butchthompson42796 жыл бұрын
Well Shawn or is it Sean I for one appreciate it you have helped me with many decisions and they were all to the good . So thanks again
@ketodad6 жыл бұрын
Tip bro ; When in the field , try using ash from your fire mixed with water to make a paste to clean your stones ( works awesome on ceramics) I just rub it with my fingers hard and rinse it off. I totally love the new DS2 also. Bought a couple already.Pete
@FearNoSteel6 жыл бұрын
hiwa thanks man, badass tip bro. I also got the DS2 Jesus it it's Maxamet for breakfast.
@mostmuscular6193 жыл бұрын
That can beat the shit out of that edge. I'm a bit discouraged here. I just bought the Manix 2 in S110V and Maxamet. Reconsidering keeping the S110V instead?
@elijahweaver22826 жыл бұрын
Man those chips would happen w any knife I got some in a cold steel d2 from cutting a can
@krispybeats66153 жыл бұрын
Do more spyderco videos dude. I like 🤣
@kgrimm55766 жыл бұрын
As soon as ya started on that can o beans I knew you'd might have to eat some maxamet chips with it! Cpm m4 is about as high as I'd go for hard use, but it takes it like a champ. M4 is a "fickle mistress" tho, all having to do with getting that edge right with that tough carbide formation.
@holdernewtshesrearin5471 Жыл бұрын
M4 is my favorite as well. I don't mind the lack of corrosion resistance and it seems to hold an edge without taking damage as well or better than any other steels out there for what I do. I don't have any experience with Maxamet or the newer steels to come after S110V and such though. I figure if it ain't broke I won't fix it though. M4 is my steel I suppose.
@butchthompson42796 жыл бұрын
Thanks BBG now I have to have a knife with a maxamet blade .
@8thsinner5 жыл бұрын
Was this the factory edge that chipped, or have you passed three or four custom sharpenings first? It's typical for chippings early on in most highed end steels that I have noticed. Then they kind of settle in.
@mauricedelorenzo52134 жыл бұрын
Yup that burnt edge ...once its gone the we good
@SimonsDiscoveries6 жыл бұрын
Just found you channel and subscribed. The exact same thing happened to my Manix with Maxamet blade when opening a can. The chipping didn't occur until I started turning the blade to follow the curvature of the can. Did you also hear that ominous cracking when turning the blade? lol It actually did absolutely no damage when I cut the metal along a straight line. Also, sharpening didn't seem to be that big of a deal for me either.
@FearNoSteel6 жыл бұрын
Simon's Discoveries nice, I've been your subscriber for a while haha. Interesting, I never thought of the twisting. It held up like a champ on everything else. Yeah the Sharpening difficulty is overblown.
@SimonsDiscoveries6 жыл бұрын
Oh, nice :) Have we talked on KZbin before? Sorry, I can't remember. I think that if I really needed to cut metal with this knife, all I'd need to do is round off the edge to increase the angle and stability. I have a feeling it'd cut metal like a champ. But then, its cutting efficiency would most likely drop dramatically when used on most other materials that we actually cut everyday.
@FearNoSteel6 жыл бұрын
Simon's Discoveries I agree, of course . Cutting metal is just silly haha
@Roger-ws8rj3 жыл бұрын
I've had my maxamet para 2 for about a month now.... I wish I went with s30v. I'm not saying that s30v is better, but if you live near the beach, maxamet requires way to much maintenance. The oil seems to rub off on one side in my pocket, and if I dont oil daily it will rust. But I still love this knife
@lindboknifeandtool3 жыл бұрын
Try forcing a patina. The patina helps create a surface that holds oil better. You could also go for an aftermarket coating like cerakote.
@MrWeedpeet6 жыл бұрын
These Chips are no fun to get out. Do you think the steel is too brittle or would the damage be similar in a manix with s30v or cts xhp? Im just curious. :) Nice field sharpening demonstration. I think a Dmt double stone came in handy aswell.
@FearNoSteel6 жыл бұрын
MrWeedpeet haha it only chips if you use it as a can opener, 8cr13mov makes a better can opener but Maxamet will destroy it at everything else. Seems we can't have it all. I'll take Maxamet since I can sharpen and I keep user error to a minimum
@MrWeedpeet6 жыл бұрын
Big Brown Guy that is true :) looking forward to your opinion on the cbn double stuff :)
@FearNoSteel6 жыл бұрын
MrWeedpeet thanks bro
@jeanjean40973 жыл бұрын
Great video! Finally someone who exposes his blade to real world conditions! Need your advice BBB. Manix 2 LW Maxamet or Shaman S30V? I know you are a steel expert and Maxamet is a "harder" steel but just wondering what your take is. Thank you!
@Gpknives6 жыл бұрын
New double stuff is going to have CBN instead of the brown ceramic...FTW!
@FearNoSteel6 жыл бұрын
GPKNIVES Haha I actually called a few days ago to see if you guys had them in stock.
@Gpknives6 жыл бұрын
Haven't dropped yet but when they do we'll have 'em.
@FearNoSteel6 жыл бұрын
Got mine in the mail today, it's got some weight to it. Makes a very toothy edge with the fresh coated CBN. I'll have to use it more before a vid
@Nate1965016 жыл бұрын
I know you love those Spyderco's Sean or Shawn (sorry I do not know proper spelling) so I am wondering if you have an order in for that Manix2 in M4? M4 seems to be the craze as of late. I see it coming out with all major knife producer's and with good reason, holds an awesome edge! I've got several of those many M4's out there to include a couple BRK's. I think I see a new alter-ego for you...Maximetman!
@FearNoSteel6 жыл бұрын
Nate Brabant the DLC version looks radical. I currently have more then enough M4 in my collection. I love my jade g10 Millie, wish I got the free square head too though. Hahaha that's hilarious MaxametMan lmao
@Nate1965016 жыл бұрын
Even Knives need a superhero!
@FearNoSteel6 жыл бұрын
Nate Brabant hahahha
@Nate1965016 жыл бұрын
Since it was the bean can that stumped you, I hope it was at least a Bush's! That alone would have lessened the sadness!
@FearNoSteel6 жыл бұрын
Nate Brabant That was the only reason to risk it all was to get to that bush bean goodness
@sour77866 жыл бұрын
Murray carters neck knives are truly amazing. Idk why I'm saying that here but it's so thin sharpen it in a king 1k and 6k maybe at about 5 degrees per side edge doesn't roll can still chop or carve wood. And I just try comfortably Dry shave with it. Unbelievable
@sour77866 жыл бұрын
Maybe 16 inclusive
@FearNoSteel6 жыл бұрын
Sour it's some good stuff man
@_Majoras6 жыл бұрын
push it to the limit! walk along the razor's edge
@FearNoSteel6 жыл бұрын
Majoras hahahha "like a bat outta hell you smash the gates!"
@sour77866 жыл бұрын
I wanna see this channel take off
@sour77866 жыл бұрын
So you raised the angle to get the chips out quicker. Then you where going to go back to the original angle till the micro bevel was removed?
@FearNoSteel6 жыл бұрын
Sour exactly
@sour77866 жыл бұрын
Really interesting never seen that technique before. Thanks for Showing that
@MikeUman6 жыл бұрын
I carry a DMT Diafold in coarse/fine, and, an X-fine/XX-fine for fixing problem edges away from home. If I need to fix an edge problem those can't handle, it's probably time to get a new knife, anyway. :)
@FearNoSteel6 жыл бұрын
Mike Uman it's always time for a new knife hahaha
@MikeUman6 жыл бұрын
lol! Amen to that!
@kevinAuman15 жыл бұрын
I was just reading your posts over on thespyderco forums asking If max is dead lol I sure hope not because the prices are going to skyrocket and I only own a native in maxamet currently with Hope's of a para 3 in future...
@FearNoSteel5 жыл бұрын
Yea, its too bad, looks like it got mothballed.
@kevinAuman15 жыл бұрын
@@FearNoSteel I sure hope not lol
@oceanwaves832 жыл бұрын
How have your thoughts changed about Spyderco's Maxamet over the years? Was the release of this steel one of the main influences on your pursuit of making high end knives with the highest wear resistance possible? Like, is this was led you to pursue REX 121, 15V, and the like?
@butchthompson42796 жыл бұрын
That is very impressive but I would need to be in dire straights to use my knife to open a can .
@FearNoSteel6 жыл бұрын
FlamQ Dbltap lol
@FearNoSteel6 жыл бұрын
butch thompson Yea I wouldn't use a knife to do that, but I'm forced to show you all what the capabilities are.
@butchthompson42796 жыл бұрын
That would be two good reasons .
@damensutherland70816 ай бұрын
Spyderco has this knife for 360 dollars .you should hire a made
@rodrigoroaduterte94153 жыл бұрын
Hell what? You’ve got no decent can opener? I’d never do it even with a 10 times cheaper knife. This is like eating soup with a fork.
@martinjohnson23813 жыл бұрын
Whoosh.
@trainingwolves76 жыл бұрын
Hey man, would you be interested in reviewing my Paramilitary 2 in Maxamet?
@SL-wi8jk6 жыл бұрын
How did you get your hands on a pm2 in maxamet?
@trainingwolves76 жыл бұрын
Scott Light I got really really lucky, bud. This guy happened to get on board as soon as they were released, bought a couple, and ended up selling me one. I hope to get a review up on it soon.
@sour77866 жыл бұрын
Dc4 or double stuff?
@FearNoSteel6 жыл бұрын
Sour hrmmm, double stuff. No great reason
@SL-wi8jk6 жыл бұрын
Great video, really enjoyed the can test. I wish more youtubers would push the envelope of what real edc and camping knives are subjected too. If it was your only knife you might have to open a hundred cans with it then stab a bear. Shit happens.
@bp-hx9ts6 жыл бұрын
An eraser will help get the load up off the ceramic