Spyderco Para Military 2 S110V Blurple Knife Review. The Awesome Ergonomic Classic.

[@Eldofarmboy]

The PM2 has been my personal favorite for a long time now. I've batoned the hell out of it and the knife suffered zero damage to any part of it. It's invincible. Mine does everything from food prep to EDC tasks to bushcraft and no matter how often I whoop on it the thing just won't die

[@nursekazhasaknife9124]

6 hours later and research I return to this video and have decided on burple. You are gentleman and the other thing.

[@JesseMrozowski]

I'd watch a gaming review if you did one.

[@kennethmarshall1291]

I have the pm2 camo just like my drinking blacked out. Love it. Cardboard cutter conversation ender. Worth every penny I spent and didn't have. Your reviews are great. Unlike half the nonsense I see. Thanks

[@jasonchatham4170]

AKB. I have finally decided to pull the trigger and get the blurple pm2. Been watching your entire catalog and the fact that you use this knife as the standard by which to compare higher end knives says a lot.

[@AdvancedKnifeBro]

If a person wanted one really good pocket knife I’d make it the Pm2.

[@jasonchatham4170]

@@AdvancedKnifeBro I own and operate my own pest control business here in ATX. What would you recommend for mass insect slaughter? (Bet you never had that question before). Seriously though, thanks for reply. I love your channel and have been pushing your beer reviews on some buddies of mine. Two of which go to AA.

[@Player_Review]

I have the 'grape' one! IMO, best EDC knife, no questions asked. I find Spyderco's to be boring, but they sure do make great knives. I almost _never_ carry it, for the pure reason that it is just not exciting. Very, very functional though. S110V is really special and CPM only provides it to makers on special condition, hence Spyderco being the only vendor I know that has gotten to work with it.

[@AdvancedKnifeBro]

I plan on putting it through the paces now.

[@southernstacker7315]

Thanks for showing this. I used to carry a para 3 in camo and black. Been carrying a Blurple PM2. I love it. All I carry now.

[@Naderlite]

This has been my edc blade for about 6 months now and I have no complaints, it's a must have.

[@Player_Review]

If there is any folding knife that is a 'must have', it is the PM2. Even though I don't rotate it very often, the knife collection wouldn't be complete without one.

[@AdvancedKnifeBro]

I'm gonna start putting it in my rotation and see how I like it. It may be a touch too heavy then what I like... but if I've been carrying the Olight Copper, then I can handle this.

[@AdvancedKnifeBro]

It's a nice well made blade for sure. Worth the money.

[@homsuplo7757]

Your editing is flawless and seamless, you don't waste film school monies.

[@AdvancedKnifeBro]

Oh I wasted it! Still paying off loans.

[@enxm.gnxy.4925]

The DLC gaming reference made me chuckle. Very clear video & great commentary. Suuuuubbed!

[@bennutter8897]

Right on Mark... You did that knife, and all it's variations right by that review. If you see 2 versions, get a good sense of them all. I think that video will also help out the guys I see that are up in the air about buying a Para2 or not. Often it's Para2 vs Manix2 debate....

[@Player_Review]

Buy them both! Everyone that has held my PM2 and didn't already own one have ended up going and buying one, all two of them. Manix 2 is a bit more personal, since its use is a little less versatile as an EDC.

[@AdvancedKnifeBro]

Good idea for a spot in my Manix review, thanks!

[@bobbyb608]

I laughed my ass off over the commentary. You definitely earned a new sub 😂😂

[@AdvancedKnifeBro]

Thanks man, check out some of my other videos if you get a few minutes.

[@dalstar925]

First knife reviewer I've actually enjo...zzz...oh I'm back now! Thought we were talking about DLC and gaming again! Def earned a new sub here!

[@benjamin9901]

I just picked up a Paramilitary 2 in S110v partly due to this review. Thanks Advanced Knife Bro!

[@another5961]

*Owns multiple pm2's You have arrived, you are now a knifeguy

[@supremeuppercut]

Brilliant. Loved the review and can't wait for my Blurple to arrive!

[@AdvancedKnifeBro]

It's awesome. That blade just falls now. I think compression locks are my favorite, in terms of usefulness.

[@Eldofarmboy]

The PM2 is a beast

[@haydenbrayton]

“And one has dlc or downloadable content” That had me dying man. I swear its where my brain jumps whenever I see dlc as well haha.

[@modernarnis4867]

You are a super genius knife reviewer...

[@AdvancedKnifeBro]

Naw, just advanced.

[@modernarnis4867]

Advanced Knife Bro, Truly advanced! I really enjoy your reviews. Thank you for all your hard work. Peace

[@menacewithaknife4045]

Love my left hand pm2. Thank you Spyderco. Great vid AKB🐱

[@YesterdayMeetsToday]

One of these days gonna get one, until then I will continue to carry my trusty Delica 4. Great review Knife Bro, always enjoyable to see you with the Spyderco's

[@Player_Review]

Can't go wrong with the Delica. Nice knife!

[@AdvancedKnifeBro]

The delica is nice. Most people really don't need a 3 inch blade, unless you use it outdoors or for food prep a lot.

[@AdvancedKnifeBro]

They're my favorite man.

[@dedum52]

I dig your video style. Thumbs up!

[@AdvancedKnifeBro]

Thanks man!

[@danofiremano]

I love my Camo/Black PM2. I've had it for years and used it extensively in my outdoor adventures! The DLC coating is still holding up really well too. Great review AKBruh.

[@jonathanrowan4802]

I was curious about the coating, I have the same knife but honestly I bought it cause I love the way it looks and I’ve had nothing but bad luck with coated blades. So I haven’t used it as much because of that reason. I also have the Benchmade super freek and I have the same problem with that one. So I bought the Bugout and 940 so I could use them. So I was planning on getting another spyderco also.

[@kaozer666]

my personnal experience with s110v (on pm2 and manix 2) it holds an edge for an incredible time. when i first got my manix i wentnearly 2 months without sharpening. otherwise good review! :D

[@AdvancedKnifeBro]

+Kaozer thanks! I've since sharpened mine, but I was stripping XLR cable with mine. It wasn't dull, but it couldn't push cut paper any more. It only took a minute or two of touching up.

[@kaozer666]

that's about when i sharpen my s110v. makes it easy to just touch it up to hair popping sharp.

[@beauxtx1959]

Got 'em both and love 'em both.

[@royjones59344]

Just found your channel and subbed. Great review and narration.

[@AdvancedKnifeBro]

Thanks man!

[@NWGR]

Awesome review. I have the manix 2 in s110v arriving tomorrow. :-) Subscribed.

[@AdvancedKnifeBro]

The lightweight or regular... or XL?

[@NWGR]

The regular with the blurple G10; I don't think there's a manix 2 xl with s110v; the second they release one I'm all over it. :-)

[@CenkZappa]

How thicc is the tip? Is it similar to the Endura 4? I've got the Ganzo F729 and it's got a paper thin tip. I'd be afraid to use it if it weren't a Ganzo. I don't want to spend the money on the PM2 if it's the same.

[@AdvancedKnifeBro]

It’s kinda thin... like the endura

[@CenkZappa]

@@AdvancedKnifeBro Oh great, this comment is going to cost me $125-$150. Thanks Bro!!!

[@bigkrumins1315]

I just dropped my blurple pm2 on wood floor and stuck in and snapped tip off

[@CenkZappa]

@@bigkrumins1315 Oh damn that's awful. I'm sorry man. It's 10 months later and I still haven't gotten a PM2. This may be the deal breaker. Thanks for the heads up!!!

[@dubglock2312]

love the pm2!!

[@AdvancedKnifeBro]

Me too!

[@sams.710]

I wonder how well the s110v held up? Pm2's a great blade, plan on getting the blurple model to replace my tricked out older Pm2.

[@AdvancedKnifeBro]

It’s held up well... not too hard To sharpen on my sharp maker

[@Mrplacedcookie]

One of the best knife ever made. And in so many flavors . Para 3 is a god companion. Waiting for my Blurple. :)

[@AdvancedKnifeBro]

Yeah a lot of people love that one- never got around to picking it up.

[@blahblahdude100]

I know this is a random late message. But what do you think of S110V when it comes to sharpening? Is it harder than sharpening the S30V and what pieces do you have for your sharpmaker? I came to ask you because I love your no bullshit answers.

[@AdvancedKnifeBro]

I haven't sharpened this a whole lot, but I touched it up pretty easily on my Sharpmaker with just the gray stones. I am sort of just speculating, but it's angle matches the sharpmaker well.

[@dr.inking5339]

Perfect review!!! Thank you

[@AdvancedKnifeBro]

+Juan Merino WillyFog Thanks!

[@bogoljubdjordjevic7528]

great knife have everything what one folding knife need to have and look cool :D awesome rew

[@AdvancedKnifeBro]

Thanks man!

[@troutbumandsam5394]

Great review, brother

[@JoBles360]

New to your channel! I have watched a few other videos and I really like you style. keep it up! Gained a long term sub from me.

[@AdvancedKnifeBro]

Thanks man! Glad you like it!

[@Rivy_ID]

The two PM2s in your video are the two versions I am considering... so blurple or comando? For your money would you buy the blurple again over the commando?

[@AdvancedKnifeBro]

+Ryan I I think I prefer the Blurple. I do prefer uncoated blades though. There's a light green/natural G10 version floating around out there- I'd love that one.

[@brianonthego]

Very nice review. I subscribed.

[@AdvancedKnifeBro]

+Glocked 17 Thanks!

[@brianonthego]

Advanced Knife Bro, No problem. Please take a look at my Glocked 17 channel and subscribe, I appreciate it.

[@man-bagdammit2297]

Just bought a PM2, do you personally prefer tip up or tip down when u carry? This video shows both knife clips in different configurations. Thanks.

[@AdvancedKnifeBro]

Tip up. Many people prefer tip up because in theory you get faster deployments depending on the knife. However a lot of times I carry a knife in an interior pocket, so it really doesn’t matter.

[@peter-zs4ml]

Like how you casually threw it through the box, into the stump. First try?

[@AdvancedKnifeBro]

I think on that one it was. Sometimes it takes me a few times. Clip points are the worst for that.

[@jeremydroge4025]

Great review !

[@darksi226]

Any update on the s110?

[@AdvancedKnifeBro]

Still a great knife.

[@joshcoy6399]

Man, IDK if its the same dude, but I just bought a blurple off of a guy on that very FB group and was simultaneously rewatching this vid while messaging him. Did I just break the space time continuum?

[@AdvancedKnifeBro]

Probably not? I got my from a guy named Lefty hook.

[@joshcoy6399]

You buy many knives from pirates? LOL!

[@freshsteve509]

Your channel should grow

[@AdvancedKnifeBro]

Oh i doubt it!

[@heyyitsandy]

SUBBED FOR THE BLURPLE

[@AdvancedKnifeBro]

Thanks dude!

[@OLMmedic]

I like your reviews and humor. Smart ass. Lol

[@brucemcintyre2383]

Do you think that for your comparison video you could baton a Ganzo Para 2 knock-off with the genuine CPM S110V Purplue Spyderco Superknife? That'd be edifying in its rectitude. Thank you. etc

[@Player_Review]

May as well not risk the knife centering/bladeplay by batoning the PM2, whereas the Ganzo you can just throw away if it has problems. Plenty of other channels have abused the PM2, though I can't say I've seen the S110V abused yet. BladeHQ has done some decent field tests with the PM2, including batoning, and it held up fine.

[@brucemcintyre2383]

Player Review I want the AKB to use the real Para 2 to whittle the fake Paraganzomilitary into pieces. Anybody can split a stick in two with a knife. (Personally, I use a hatchet.) But, if the Knife Brozilla were to cut up the cheesy fake PM2 with the real PM2, poetic justice would be done. Plus, we'd get an idea of what real cobalt-bearing martensitic steel can do.

[@Player_Review]

Bruce McIntyre Actually, those are some great points. I look forward to his comparison as well. S110V is pretty good stuff, I've only stropped mine so far, and I didn't even need to. Sad days for someone that enjoys sharpening, since with S110V you'll pretty much never have the need to.

[@AdvancedKnifeBro]

I probably will do this, despite my better judgement. If cold steel can smack locks with weights of competitor knives- I don't mind doing this scientific test.

[@thebusinessend1]

Is that Grape drink flavor or real Grape?

[@AdvancedKnifeBro]

Sizzurp.

[@thebusinessend1]

i drink 83 of them ususally

[@PrioritySurvival]

I cannot stop laughing when I watch your videos!

[@AdvancedKnifeBro]

+PrioritySurvival Thanks!

[@randallkelley3599]

My Blurple gets crazy sharp!

[@AdvancedKnifeBro]

Mine too! Super easy to sharpen

[@taylorung1952]

How hard is it to sharpen the s110v on the spyderco sharpmaker?

[@AdvancedKnifeBro]

I've touched mine up a few times... and I don't have much a problem. I usually don't take the time for a full re profile though. If I do 5 minutes of work on the gray stones and it's push cutting sharp (or near) I finish off with the ceramic rods, and I'm on my way.

[@BesidetheDyingFire]

Pm2 or 940 Osborne?

[@AdvancedKnifeBro]

Hmmm... PM2. My wish list knife is a second PM2 with the natural green G10 scales.

[@radagastthebrown533]

Трудный выбор..

[@robinpohl2702]

Hey man im currently looking to buy the Blurple one, have you found out more about the steels since you did the video ? Regards and thanks for the video

[@AdvancedKnifeBro]

S110v holds an edge a good amount of time. Check out this guy who does sorta scientific steel cutting tests. Great KZbin channel by the way too. www.patreon.com/posts/full-steel-table-17366331

[@robinpohl2702]

Advanced Knife Bro that's pretty helpful, thank you

[@robinpohl2702]

@@AdvancedKnifeBro lol, just clicked through yt again and what do you know? I found an old comment of mine. Thought I'd follow up and say that i got the blurple pm2 very soon after and it's currently sitting on my chest while I waste my life online. Also i think you might actually be the reason I watch Cedric's channel to this day, i forgot but I'm pretty sure the link you sent was the first i ever heard of him. So that's two things to thank you for, have a nice day!

[@itisimpossibleto]

anyone know how you some of the better ways to get used knives?

[@AdvancedKnifeBro]

+itisimpossibleto got to be a member of a forum or Facebook group. I've bought a few knives this way. Don't expect steals though... i bought a yojimbo 2 recently for $100 (new in box)... when you can get them for $120 new.

[@dml4557]

i dont know if i should buy one because of the to side blade play if i use it use it doing some hard tasks In the woods +Advanced Knife Bro

[@AdvancedKnifeBro]

There was no blade play in either one of these. Although if you're going to baton and process wood with this knife- probably not.

[@dml4557]

thanks, i´m not going to do anything as heavy as baton +Advanced Knife Bro

[@theplasticdesert2408]

Finally slips up at 4:42 as Fisher Price shill.

[@Adam-rw4xk]

There are lab tests for steel's edge retention. S110V is nearly 3 times better than S30V. As is typical the better steel is more expensive and a little harder to sharpen.

[@KaNa2357KaNa]

when is the next plinket review!!????

[@KaNa2357KaNa]

I mean , when is the next Nitecore TIP review?

[@AdvancedKnifeBro]

Ha ha!

[@AdvancedKnifeBro]

Next week hopefully. I usually work on my reviews on Monday and Tuesday (because those are the only two days I have sort of free)- so expect it then. I have a bit of it done already.

[@SPARTANKNIFETEST]

Spyderco has excellent knives, but I will always choose several Ganzos before a Spyderco, because the quality for money of Ganzo is far superior. Spyderco and the big brands should reconsider their prices. I love your videos! Best regards.

[@AdvancedKnifeBro]

Thanks!

[@ryandelehanty8368]

manix 2 and sharp-maker or just the pm2

[@AdvancedKnifeBro]

You need a sharpmaker, so the first one.

[@ryandelehanty8368]

Advanced Knife Bro i bought a 940 lol but ill most likely get a sharpmaker soon

[@homsuplo7757]

Do you cut your boxes into tiny strips all the time? I don't, i just cut open and discard, like abnormal people eith knives.

[@AdvancedKnifeBro]

I cut them up for the videos mostly. But to fit in the recycling bin out back, sometimes I have to cut them in small pieces.

[@homsuplo7757]

I cut mine to burn to help with the LA smog, cause i care!

[@trainingwolves7]

Hey man, would you be interested in reviewing my Paramilitary 2 in Maxamet?

[@Reviews4fun1]

How has it held up for you?

[@wvmountaineer69]

Subscribed!!! I still can't make my mind up, 30v or 110v, help guys.

[@AdvancedKnifeBro]

+CJ Ferrell I don't mind either. The steel snobs will say s110v... but I like the 30v fine. I'd like this in the natural G10 though.

[@kevinragsdale6256]

Look up an edge retention test of the s110v on the spyderco. 1500 inches of cardboard cut before it started to lose is hair shaving sharpness. That's why I opted for the s110v

[@40belowful]

do the manix 2 light weight clear blue:)

[@Player_Review]

Manix 2 is an interesting one, I had the blurple S110V for a time and it would make a great companion knife when out camping. Ultimately, I found it just didn't _excite_ me and returned it to the vendor.

[@XxPx3xNx6xUx1xNxX]

Got a discount code?

[@AdvancedKnifeBro]

+Keen Beams nope! I bought mine off Leftyhook for retail.

[@wrjames38]

Great knives. The spydie toads on the forums SWEAR that the SV110 holds an edge 2-3 times longer. Haha. Well...I was a sucker and bought a blue sv110 manix 2. We'll see if us mere mortals can tell. I also became a frog and pre ordered a Maxamet paramilitary 2 because THAT steal is Soooo much better. I'm pathetic. ..

[@AdvancedKnifeBro]

Maxamet is supposed to be the shit! One of these days I'll get something in it, and then wonder why it feels the same as all my other knives.

[@jasonf478]

I WAS ACTUALLY ABOUT TO SLEEP HAHAHAHAHA INSTANTLY LAUGHED AND WAKE UP

[@chadlampe4026]

I might or might not have ordered one and by might have I mean I ordered one and I have a problem not ordering knives at the moment. Ganzo 729 also on the way from [purses lips] China.

[@AdvancedKnifeBro]

+Chad Lampe we all have the same problem!

[@dalecarpenter8828]

I hate spyderco ! But good review !

[@grantmiller6002]

Murdered out Ch'all!

[@AdvancedKnifeBro]

Fo sho

[@homsuplo7757]

Smooth as vASSeline

[@scalereality4840]

Para2 Para2 it's all you hear in the world of Spydercos, I've over a dozen Spydies and have avoided this knife but damn this blurple nasty colour has forced my hand into buying one, hoping it lives up to it's very high expectations

[@AdvancedKnifeBro]

I might say, never ever put a knife on that high a horse. I spent $455 on a Sebenza- so I can definitely relate to dropping an insane amount of money on a simple cutting tool.

[@mkeitley]

but seriously though... do you have a gaming channel?

[@AdvancedKnifeBro]

Ha! No... I've thought about it (not a whole lot), but I don't keep up on new releases. I have a ton of systems up until the PS3- plus I don't have time for that.

[@Deathless2288]

PC Master Race

[@tonycanniffe2360]

I'm commando at the moment

[@AdvancedKnifeBro]

Great to hear!

[@ArnsCannon88]

I HATE DLC!!! Just kidding that carbon coating is tougher than nails.

[@AdvancedKnifeBro]

Yeah it is!

[@VicariousReality7]

Haha yes give me that sharp vaguely handle shaped G-10 brick

[@TheKimjoh560]

I used to hate Spyderco knives. I found them ugly and frankly even the name "Spyderco" is pretty stupid in its own right. (Spyderco meikz sum oogly azz knyfes) But I figured it looked like a decent knife to use around the kitchen so I bought a Ganzo G-Whatever-Spyderco clone. I ended up buying like 8 or 10 of those and eventually a proper PM2 and then a PM2 in s110v which is now in the mail. Its still one of the ugliest damn knives in the world and the Spyderco name and retarded spider logo is still silly as hell. But I can't argue with how brilliant and unique these knives are - in thier own right.

[@AdvancedKnifeBro]

+TheKimjoh560 man I love the PM2... my endura 4 was my first proper knife. I like their unique looks, but yeah- they may not be for everyone.

[@jesser8369]

Growing up my local malls used to (sad they no longer do) have multiple knife stores, I looked at the benchmades, checked out the kershaws ,and then there they were (As you said) the ugly spyders.. Why a spyder, why the hole, co? It wasn't until I became an adult and my friend gifted me my first Spyderco (the tenacious) did I really begin to appreciate the designs of the company. Now I have multiple knives and I love each one of them, but the PM2 is definitely still king. Also, fun fact Sal Glesser (Founder of the company) said the name came from stylish, "Cutting edge", Italian sport cars that come in a Spyder variant such as Ferrari. The co is company, smoosh them together = Spyderco.

[@huejanus5505]

Para 2=good, manix xl=gooder

[@AdvancedKnifeBro]

Come on man- I don't need to buy something else now....

[@devjock]

There's always that Brother 1601 clone. I'd be a good investment just for the shenanigans you can pull off with the "one knife one life" slogan ;)

[@Samlol23_drrich]

Michael Demers

[@nml5536]

👍

[@glockensig]

You were flicking your middle finger at us...like a lot...

[@AdvancedKnifeBro]

It's rated R, between that and the F bomb.

[@em4703]

I absolutely hate this steel, and crucible chart about it is such a big fat lie... Its "more corrosive resistant than s30v/s90v"... IF ITS PUT IN A HIGH TEMP SOAK SO THAT ALL THE CHROMIUM AND VANADIUM FLOATS FREE IN THE ALLOY, not in carbide form... But they sure as hell don't tell you how they got those values. Like any knife maker will ever heat treat it like that in the first place. On top of it, with a spot on heat treat and a shallow geometry, it microchips like crazy, even more than s125v. I had the blade of my Manix 2 rehardened by a professional from my country, still the same results. My Kershaw Shallot, same problem even after rehardening and tests done to the steel structure to see if something was wrong, so it was definitely not the batch. I'll stick to S90V or 10V for slicers.

[@CarbonSuit]

My 110V broke today cutting cardboard. The blade literally split and has cardboard stuck in it. I love this knife but that steel is just too brittle at that thickness to be a user.

[@AdvancedKnifeBro]

That's very weird. It is absolutely not brittle like that. That's abnormal and you should send spyderco an email about this.

[@CarbonSuit]

I did. They have been good to me in the past so I expect it won’t be an issue. I really loved that knife, and can’t be mad at an excuse to try a new para steel.

[@Reviews4fun1]

@@CarbonSuit wow so what steel do you recommend? Maxamet? S30v?

[@PowerMadHeadBanger]

Very smooth knife but very weak knife as much as in tip strength as it is in lock strength.

[@Player_Review]

In BladeHQ's testing, the compression lock rated at 462 lbs, making it superior to the liner and also frame lock in that same testing. Unsurprisingly, lock backs proved stronger. The tip is rather thin, but with the heat treat, I don't see it being a problem. Obviously, a fatter tip would help you pry doors open or whatever it is we're doing with the tips of our knives.

[@AdvancedKnifeBro]

I've never broken the tip of a knife. My wife has with a kitchen knife... but I don't pry with knives. I've broken the flat on head on my leatherman wave before by prying- but that's about it and the Wave was replaced free under warranty.

[@weouchhere9338]

I love you

[@AdvancedKnifeBro]

Sounds good to me!

[@spectreQ]

I'll stick with its chinese made ganzo cousin

[@Player_Review]

Not quite sure if Spyderco is willing to call Ganzo's franken-clone the PM2's 'cousin' yet.

[@AdvancedKnifeBro]

Don't worry, I have a comparison coming up between those!

[@brenthokanson4478]

Watched untill the f bomb geez

[@AdvancedKnifeBro]

Wonderful story.

[@brownstar8228]

Shut up Brent

[@brenthokanson4478]

@@brownstar8228 no

[@johnclark2278]

grrrreat

[@Elslemmo]

yAAAAAAAAR

[@brenthokanson4478]

No

[@RN-ts2kq]

Extremely disappointed with the lack of pocket perspective in this video.

[@AdvancedKnifeBro]

For better or worse my videos have been lengthened to include things like this, and extra dick jokes too.

[@DavidNefelimSlayer]

Comment

[@intoguns]

your stuff is good, stop the f- bomb and your viewership will increase

[@Player_Review]

I personally would prefer he not censor his language and really don't even notice. You could be right though, I'm horrible with KZbin knife analytics.

[@AdvancedKnifeBro]

Thanks. This is the second comment I've gotten about language this year. I do take it seriously, and perhaps if more people complained I'd done it down a notch. But I don't know where I would draw the line, because most of my bad language and inappropriate humor is not the f bomb. Then there's already so many videos of me cussing- so how would anyone know? I'm giving it until the end of the year- and if KZbin wants (which I think they do) hair gelled dudes talking into a camera for 20 minutes with a product in their hand, then so be it.

[@AdvancedKnifeBro]

I usually tone it down when working with manufacturers- versus reviewing stuff loaned or on my own accord. But no one notices that. I didn't have one bad word in my review for the Marauder, but no one said anything about that.

[@intoguns]

think about widening your audience and make it family friendly... the humor and delivery is what stands out, now make it shine!

[@bobbyb608]

intogear nah, the language is fine

[@Jack3dBrett]

downloadable content lmaooo

[@ryandelehanty8368]

hahahaha in two flavors

[@AdvancedKnifeBro]

Grape or fucking camo

[@jamesbramblett3346]

My edc 3 years running. Nice review

[@AdvancedKnifeBro]

It's a great blade. Too bad it took me so long to get one.

[@yash2777]

First

[@AdvancedKnifeBro]

Niiiccceee and shiiiiiiet.

[@mauricedelorenzo5213]

Your humor is good but you could tone it down a little. Every other sentence doesn't need an added quip. It makes look like your trying too hard and it takes away from the information you are trying to give.

[@AdvancedKnifeBro]

Thanks, but my formula works for my subscribers- who love it. Look at the comments under my videos- if you think I’m being flippant. However most other KZbin knife reviewers abide by your suggestions- so those might be a better fit for your sensibilities. I have been using this formula for years- and with the once every few months suggestion like yours, it’s just not something I want to do at this point. My subscribers wouldn’t like it. Thanks for commenting though.