Square off a room, tile floor layout. 📐

SUBSCRIBE Learn how tile the right way
When you install a ceramic , porcelain or marble tile on a floor, one of the first things that needs to be done is to determine how square a room is, which walls are parallel, which walls are square and which are out of square. The reason to do this is so you will get even and consistent cuts along a wall, and you don't end up with wedge type cuts that turn into slivers. From my experience, no room is ever built perfectly square, there is always at least one wall that is out of square and in older homes rooms are usually pretty far out of square. In this video I show how to "Square Off a Room" using a 3-4-5 right triangle method, which comes in handy when a laser square or some other modern aid is not available. Knowing how the walls are oriented to each other will help with a tile layout to prevent unexpected unsightly wedge cuts. One of the worst mistakes that can be made is to assume that a wall is square to another, start with a full cut and then to find that the wall is out of square and you start to get an increasing distance between the wall and the tile and end up with small wedge tile cuts to fill the gap. Squaring off a room is an essential part of the tile layout process.
All tile installed by Sal DiBlasi, Elite-tile Company, in the Boston North Shore area. This video contains affiliate links, which means I will receive a small commission if you click on the product link.
#tile #transformthetrade #howtotile #installingtile #howtoinstalltile #Schlutersystems #TCNA
☕ Buy me a coffee ☕
www.buymeacoff...
🙂 This is my Amazon Store 🙂 www.amazon.com...
💲1 PDF Floor installation guidelinessowl.co/s/wWd2d 💲1
Channel Store / @saldiblasi
👍 Patreon / saldiblasi 👍
KZbin Channel / saldibs
Facebook
/ 56681633342
Website
www.elitetileco...
Twitter
/ saldiblasi1
Instagram
/ saldiblasi1
National Tile Contractors Association
tile-assn.site...
👇 Some of my favorite Tools 👇
Float amzn.to/2tdEpN2
Rubbing Stone amzn.to/2QrgRfh
Notched Trowel 1/4 x 1/4 x 1/4-inch amzn.to/36bq5mQ
Notched Trowel 1/2 x 1/2 x 1/2-Inch amzn.to/2Q5e90g
Notched Trowel 1/4 x 3/8 x 1/4-Inch amzn.to/39j1caB
Super Dust Collector - WaleTale amzn.to/2MDuVkK
Black Nitrile Gloves - 6 mil amzn.to/2SJQ6FZ
Margin Trowel amzn.to/352MYHx
Mortar Mixer amzn.to/2ZxYqtF
4in Sandpaper for Stone Polishing amzn.to/2ZB2skT
Polishing Rubber Backing Pad amzn.to/2srikdy
Montolit 63P3 24 Inch Tile Cutter amzn.to/2MDoFtl
DEWALT Wet Tile Saw amzn.to/2QqpO8O
Rubi Thinset mixer amzn.to/39VmNWV
Opt into NTCA’s VIP Text Messaging program for training opportunities.
Text “NTCA” to 31996 or Visit widget.smsinfo...
For Industry Professionals only

[@rob107]

Framing square and a level work pretty good too. I most always get a parallel line with a wall and put a framing square on that line then mark the square line. If the the line is not long enough you can butt the level against the framing square to get a longer straight edge to mark. Hope this makes sense

[@Hidden-comment164]

FINALLY THERE ISNT MANY VIDS ON KZbin ABOUT THIS SUBJECT

[@wealthyperson3108]

Nice explanation thanks alot Sal

[@SalDiBlasi]

Very welcome

[@loumonte658]

Beautiful work.

[@Apexjasonmorganllc]

Layout is very crucial

[@neomacchio4692]

Good video! So what do you do if it’s not square?

[@SalDiBlasi]

Adjust the layout as needed, have to compromise, but knowing what you have will help get the best results.

[@alpacasRcool]

I’ll be back!

[@oddopops1327]

👍👍😉

[@programmer6428]

video uploaded 3 hours ago but video looks like it was filmed from earlier 2000s 🤣

[@SalDiBlasi]

Nope

[@programmer6428]

@@SalDiBlasi could have fooled me sal! you haven't aged in 20 years!

[@MalcolmHarris-r2s]

Need a camera stand

[@nicholaswigand]

First lol