How To Fix "No Compression" Issue On Your PitBike!! Easy Fix!

[@mcgrinder5767]

This helped me big time! Santa got the little boy a 125cc apollo and Christmas morning it wouldn't start.. I thought the engine was done! You are the man! Thank you !

[@Binkx23]

BRO!!!!! YOUR AMAZING!!!!!! You just saved me from buying a rebuild kit. THANK YOU SO MUCH for uploading this video!!!!!

[@tormado]

I'd already disassembled the entire engine to inspect before I found this. Saved so much headache. THANK YOU

[@BrandenAllen]

You the MVP my man totally fixed the issue took like 2 minutes I didn't even have to look at anything I just went right to your fix and that was the issue thank you very much

[@FastBobM8]

BRO! Aboslute Godsend , so happy I stumbled across this video, I never would have checked there and almost sold my non running bike, WHAT A SAVE! THANK YOU!

[@jamesandrews6060]

THANK YOU SO MUCH i was about to bawl crying dude i’ve ben building this bike weeks and it was just one problem after another

[@robertburrows4163]

Just made my day man thought I was gonna have to dump a bunch of money into my taotao but that fixed it

[@mazspeed003]

Great vid..i had this exact problem on my apollo 125 an watching your video helped as i adjusted my clutch yesterday..i didnt think theyd be related but i reset my clutch adjustment an now it has its comp back

[@calebvessey4289]

aww thxs buddy!! I just installed a lifan 125 in my ct70. This trick got her started👍

[@luisaguilera7552]

This video is GOLD

[@paulosborne5328]

You just saved me buying a new engine cheers buddy !!!

[@chriszbodula1894]

I’m pretty sure that’s a compression release mechanism. These 4-strokes have so much compression they would break your ankle and very often the kick starter shaft without compression release. I just bought a 1989 Yamaha XT350 where the previous owner didn’t have the compression release cable hooked up and broker the kick starter shaft right off. First thing I did was buy a new compression release cable and kick start shaft. Works fine now

[@nolanryan7433]

Thanks man this helped me out I thought I got sold a lemon pit bike

[@leedave9314]

I’m the same, got a stomp 140 barely any compression doesn’t kick or fuck all. So gonna see if this helps

[@AGGYONXBOX]

Bro you have no idea how much this helped my sprocket carrier sheared off and locked up my chain into my engine case destroyed the engine case but the clutch gave in and it was the gold plate that had moved i took off that nut unscrewed the adjuster screw put it back in all way until it meets the pressure pin stuck the nut back on and hey prest i have clutch and it is so good thank you bro

[@MrBeanieWeenies801]

BRO I WAS AT THE POINT I WAS THROWING TOOLS CUSSIN YOU WAS THE LASG VIDEO I WATCHED AND IT WORKED

[@malikmitchell2222]

Nice bro ! I have a Tao dbx1 and I made a mistake a put the wrong oil in ! I changed the oil but it’s doing the same as yours now , no compression. I hope it works ! But yea I loves this bike ❤️

[@tylerwayman4651]

Great video! Could have saved me hours and hours of headache and money to top that! Can’t say thanks enough

[@mikedueck]

worked for me on my Lifan 125! Thanks man!

[@howy5799]

Sweet fired up straight away and mine is a cheap Chinese special bike, runs like new now 👌

[@jaimemarshall2759]

Thanks man was about to by a new motor but did as you said and it fired rt up make more videos

[@austinmccullough7320]

thank you so much i almost threw this bike away but it's perfect now

[@ryze1120]

Exactly what was wrong with it thanks bro!

[@Xeno4x]

same here mines been sitting for a few weeks because i was waiting on a new carberator and mine has zero comprassion. but the cover plate is torqued on and i cant take it off🥲

[@snakeybri]

Thanks buddy, your a life saver 👍👍👍👍👍

[@dannysmith2591]

What is that good piece called underneath the arm

[@nicbanz3151]

Fixed my apollo 250 in minutes 🙏🙏

[@danrowlands3705]

Helped me with compression n starting but doesnt that change your clutch adjustment aswell

[@selfmade_renzoo3463]

Do yk how to fix it ??? I adjusted it and now my clutch wont engage

[@BevanMowen]

Thanks mate, very helpful video.

[@lukeswise9486]

What is that thing you loosened called not the 10m bolt I’m talking about the clutch adjuster I stripped mine and I need another one so I need to know what it’s called please help me

[@JaNoahShow59]

I cant believe ive taken apart my engine 10 times pulled all the gears out reset the kickstarter ratchet system and this has been the issue the whole time. Bout go try it out see if i can ride today

[@dominicsickler6040]

I need help! I put brandnew top end and it run then decided to turn off and then later I tried to run it again and no compression, checked the head and piston and ring, they look like brand-new and tried that trick, still no compression

[@axtonsadventures2524]

So i put on a new carb, started right up, turned off to take carb off to idle down, hooked back up n it hasnt started since, even put old carb on n new plug, before i couldn't kick start with my hand, now i can? could this be my issue or no

[@dannysmith2591]

What is the gold piece called

[@piercenplummer772]

Also be sure to check your valve lash

[@hammie3455]

Does 2stroke have this

[@high3ndgarag371]

Mine does that with clutch lever pulled in i let it out it feels like compression, i put it into 1st gear and roll it with clutch in the back wheel locks still even with clutch in

[@syedalinaqi2616]

Bro I have kawasaki. I love u really helped me 👌👌👌👌👌👌👏👏👏👏👏👋👋👋👋☺️☺️☺️☺️☺️

[@williamtanche1358]

it worked??? on a kawasaki

[@elispineto798]

I ended up stripping the screw i backing the screw out now it won’t go back in what should I do

[@JakeyHD]

Nice man! I'm about to buy this bike just on the edge. Watching lots of videos on it. On amazon atm, it's going for $1095.00. I'm wondering if it's going to go down in price anytime soon!

[@SSRAdventuresMotovlog]

Appreciate it brother! And I don’t think so, these pit bikes are raising in price I remember about 2 years ago this bike was 590$ shipped! Now it’s over a grand id snatch it up now if you can!

[@JakeyHD]

@@SSRAdventuresMotovlog Yea all the videos I have seen they bought the bikes for way less than what it shows now. I should go ahead and just buy it huh.

[@SSRAdventuresMotovlog]

@@JakeyHD yeah bro send it

[@Joshtheweatherman]

I got my DB17 in late 2019 for $750 shipped, and it's been doing great! I wrecked it pretty badly, but surprisingly it didn't mess up or scratch the bike. The only thing that broke was the bolt that connects to the swing arm, which is cheap to replace. I also had to get a swing arm spacer, cause it lost that too. But honestly, it's been holding up great considering I'm a motocross rider who rides the hell out of bikes!

[@tresaidvlogs9978]

Could this be an option for a piranha 140 engine

[@charlestoncreighton3040]

And yx150? I'd like to know

[@ryderg484]

Mine is completely missing and I need a part name or is it replaceable

[@philipsondrup1094]

does this work on a yz250 2 stroke 1998??

[@jessegonzalez5815]

does this work on a pitbike that doesnt have clutch like a tao tao db14

[@kelp4262]

does this also work for old Triumph motorcycles?

[@oo7952]

Didn't work on my 125 so what next also when I push the kick start the carb spits out gas please help

[@RoySmith-lg5sd]

Thank u bro very helpful

[@azpitbikerider4031]

I have a problem with my dbx1 TaoTao it just shut off on me never turn down again it has compression 140cc

[@mr.greedy9103]

The screw was stripped on mine. Yk where i can get a new one. Or a replacement of almost the whole part

[@mattcody123]

Mine snapped off when I put the nut back on. Did you find a replacement?

[@cheesezn]

You are a g for this video

[@kevinnn7436]

I fixed my compression added new oil and the bike doesn’t turn it. You can hear the muffler when kicking starting it but doesn’t turn on

[@marte1a256]

Will this work on a 90 cc semi auto chinese bike?

[@Cruz.Kaikala]

Thanks for the help

[@euan.bradbrook2247]

Just bought a non runner for 150 and this was the only thing wrong

[@Laggyvr]

I just bought a 125cc for $100 and it had no compression

[@treejay818]

@@Laggyvr did you fix it?

[@Laggyvr]

@@treejay818 nope.

[@levitezoe1804]

I'm literally about to sell my 2018 125 vitacci rocket tomorrow because of low compression hopefully this is the issue

[@Clunker_garage]

Thank you

[@dnasamished3907]

My bike has to much compression what do I do it’s really hard to kick ????? Any ideas

[@SSRAdventuresMotovlog]

This could cause it. Try loosening the bolt like the video. What bike is itv

[@ivosimovic5258]

Don't do that! You never have to much compression! If you loosen the clutch bolt your clutch plates won't survive long

[@jarronhaleysorrell]

Mine only has compression on top dead Center and nothing on the next kick Feels weird as

[@marcusvalentin5485]

@@jarronhaleysorrell Same here. Fixed it? EDIT: Piston was dead

[@jarronhaleysorrell]

@@marcusvalentin5485 nope Maybe need valve gapping.

[@Hockey893]

This saved me

[@josiahbomford7612]

Thanks man 👍

[@littlegeez1289]

Thx that help a lot

[@ttg-trxv]

Thank u so much bro

[@joefetty3441]

Thank you!!

[@noahjevader8056]

I tried it today and i feel more compression but it still Doesnt wanne start i need to put fresh oil in and then well see

[@bkf_odyssey4139]

Thx so much

[@kadenjelas6303]

Thank you g

[@miggee47_2]

thanks for the help :)

[@Eli-tg5xz]

Hey bro what if i dont have a clutch does it still have this adjuster

[@marte1a256]

Im wondering the same. I have a semi auto 90. Did you figure it out

[@Eli-tg5xz]

@@marte1a256 I don't think so

[@marte1a256]

@@Eli-tg5xz thanks

[@austinbarnes1430]

​@@marte1a256what fixed it? My semi auto 90 has loss of compression on kick start.

[@marte1a256]

@@austinbarnes1430 mine had an issue with the head gasket. The damn guy fixed it for $150 and three months later I’m back with the same issue. This time I’m going to try it myself.

[@Soeks77]

I’m liking this video in advance lmao

[@darkdante9670]

My 110cc got this, i changed the clutch, cover, eberything and still does this, if it works, i will come back to thank you

[@darkdante9670]

IT WORKED, THANKS A LOT, YOU'RE THE BEST

[@sqxish.9325]

i have a pitbike with low compression i will try this tomorrow and i will be back with the resoults

[@loganmorris8275]

Mine wont even work still the clutch wont engage but it runs still

[@capolean2902]

i just filled my coolster (wit gas) its a pit bike but crazy thing is it wont start i thought it was i had no gas (which i didint) but come to find out it wasnt even that im tryna ride around this summer on that bitch hopefully this works tbh cause nun was wrong wit the bike

[@RonnieGibsonn]

What’s the name of the piece ?

[@jacobywilson3440]

Thank god

[@bkf_odyssey4139]

U saved me from buying a new motor

[@bigfreeze23884]

My Apollo doesn't have the plate it's a 250

[@Random.Adventures.]

nice thanks

[@200Drafty]

How about a 250R

[@dabz1556]

tysm but my oil smells burnt after using it

[@yellokoii4942]

HAHAAA this shit worked like a charm on my apollo db x18

[@emrobi17]

All we did was take the cover off and the bolt and she had compresion.

[@ronpaul8970]

20 25 turns out lmao

[@macrogames7424]

Bad thing is mine ain't Chinese it's made in America 😮

[@jaylonmoody9301]

What’s your Instagram I need help starting my db x4 apllo