Stagea Climate Control Lighting Fix

How to change the bulbs on a Stagea RS4 climate control. These tend to go out after a couple of years rendering the climate control not visible when the headlights are on at night.
Bulb (Globe) sizes:
2 x T5 multi direction
4 x T1.5
For LEDs, search Ebay for "Neo Wedge LED" or "Stagea Climate Control LED" and you'll get appropriate LEDs.
The prying tool is a cheap set found on Ebay for $2-$12. Search for "car trim tool".
The tweezers also on Ebay for about $2 search "bent tweezers".
Lastly, used was a standard Phillips head and small flat head screwdriver.

[@HashiriyaSquadron]

Very nice. I've done my ones in red to match the stereo, car and digital dash clocks. I've yet to replace the LCD ones.

[@gav240z]

Thanks for this, 1 of mine is blown. Good to know how to fix it.

[@chrisschoening4213]

I know this is an old video but will the t5 bulb work for all of them or no? I just got my stagea in the states and looking to replace my bulbs.

[@WatsUp0101]

Hi om looking for the climat control unid do you know where i van find it thankyou

[@jacobdiaz38]

hello did the actual heater and ac work when the lights were out?

[@theraque1]

Yes. The lights have nothing to do with those functions. You can have no lights and be able to use the buttons. I'd suggest if your controls don't work to get a second-hand climate control unit.

[@jacobdiaz38]

Dang, alright. Ill probably try to find one here when I got the extra money. Thank you for the response and helping a stranger out. You made my night

[@nathansmith3989]

Hey mate, im looing for the t1.5 leds but I can't for the life of me find anything

[@theraque1]

Use a T3 size as this will fit. You can also get any old cheap T10 and just remove the led from the base and unbend the wires. When you go replace the bulbs in the climate control, remove the bulbs from the base and swap them out with the leds. Just rebend to fit into the old bases. I had to do that myself as the T3 bases were too thick.

[@nathansmith3989]

Hmm thanks, the only issue is that I'm missing two of the bases for the buttons lol. I've ordered some T3 so i'll see how I go. Thanks

[@ultimatedijo7058]

​@nathansmith3989 did t1.5 fit

[@yany1440]

not T1.5 its T1.75 or philips PC74