STARTER REPLACED in more than 13 minutes MITSUBISHI LANCER

HOW TO REPLACED MITSUBISHI LANCER STARTER
MITSUBISHI
LANCER
2009
STARTER
CY / CJ
REMOVE INTAKE MANIFOLD
DONATE 😊 www.paypal.com/paypalme/olive...
Church Links 😇
mcgi.org/official-websites-an...
theoldpath.tv/

[@ShannonLyrette]

Changed started on 2009 lancer, removed battery, air intake hose, cover throttle body. Jacked up car, removed bottom rear brace of intake, moved the big electrical wire towards the right side. Unbolt the 14 mm bolts from starter from the top. Push starter out, twist to the right and wiggle it to the right. Once it’s out, have someone unbolt the big wire from starter, and the small green wire. It’s a 7 out of 10 job to do. But it’s doable without removing the intake and throttle body.

[@oliverthemechanic8532]

I never try to remove it with out removing the intake mate but For me i will still remove the intake manifold its way easier to me 😉 because of the starter bolt cable at the back 😉

[@javierochoa432]

Thanks a lot bcuz I didn’t want to remove the intake lol

[@ShannonLyrette]

@@javierochoa432 Just make sure that you move the big electrical wire and plastic tie back towards the passenger side. It’s a tight fit but it comes in and out .

[@lord_mota4556]

This guy really knows how to record thanks a lot....

[@oliverthemechanic8532]

Thanks mate really appreciate appreciate your positive feedback 😊 God Bless Cheers Oliver 😇

[@CosmoCommo04]

Mate thanks so much legend has to be the most detailed easy to follow video on a lancer repair. Have a great one. Thanks so much

[@oliverthemechanic8532]

Thanks mate for the positive feedback 😇 God Bless 😇

[@firdausravindar977]

Thanks bro for sharing this precious video on KZbin.😊😊😊

[@oliverthemechanic8532]

Thanks mate 😉 that’s a precious message also I received on my channel ☺️ God Bless to you and your family 😇

[@dailydrivenmotorcycles8767]

this video helped me out a lot! currently broke down on the side of the road with my throttle body and intake manifold off.. wish i had watched your video before hand! lmao old starter has been taken out and disconnected. new but used starter is now hooked up and ready to go in. my intake manifold is currently held in by a bolt on the left side of intake. seems to have just enough room to squeeze and wiggle the starter out of its tight placement... great job to the engineers on this one!.. thumbs up & Subscribed from this guy! cheers.

[@oliverthemechanic8532]

Thanks mate for watching Im really Happy that i help u in a small way :-) great job on the engineers :-) lol

[@MHB7000]

Great video Oliver👍. Crazy is all you have to say about lancer starter placement that’s an understatement lol I used to really like my Lancer until the starter went

[@oliverthemechanic8532]

Thanks mate for watching 🥹 i like lancer also 😉 but i agree on you at starter 😅 crazy is just only my expression 😅

[@mitsubishi7819]

Thanks for the showing how to replace the starter mate :) greetings from Mexico 🇲🇽

[@oliverthemechanic8532]

Thanks also mate for watching 😉 greetings also from Australia 🇦🇺 ☺️

[@rrmech11]

New subscriber My poor buddy is helping someone And called me. Been there done that. Nice Job.

[@oliverthemechanic8532]

Thanks for the sub mate! Really appreciate

[@JABR1957]

Gracias por la explicación y el tutorial, saludos desde Guadalajara, México!

[@oliverthemechanic8532]

Thanks also mate really happy that i help u in a small way God Bless

[@gimmesomesugar]

Thanks for the great video!

[@oliverthemechanic8532]

Thanks for the comments mate really appreciate 🥰 please share like and subscribe 😉

[@Kulisiful]

Great video How did you know the starter motor was the issue? What symptoms were present?

[@oliverthemechanic8532]

wont start mate its only clicking noise when u try to start

[@markdening9549]

Good clear video, wish they were all this good

[@oliverthemechanic8532]

Thanks mate for your positive feedback 😉 you make my day complete 😅🤩😉🙃

[@colefisher4010]

Hey thanks for the video. I cannot get my exhaust intake off. I have removed all bolts and the thing won't budge. Do I have to pry it off? UPDATE: I took off the throttle body fully and that allowed some movement...still can't get tue thing off.

[@oliverthemechanic8532]

There is a bolt or nut that still holding on it mate just double check it all if you remove it all

[@armorofgod777daggers]

Good video overall thanks for the video. Doesn't look that difficult moderate skill level.

[@oliverthemechanic8532]

Thanks mate for the positive feedback ☺️ yeah you’re right its a matter of knowing what you remove and your good 👍

[@LuisHernandez-yu3gc]

Great video man. Quick question, I need to replace my oil pressure switch/sensor on my 09 Lancer. Do I need to take off my intake manifold as well or is there a way around this?

[@oliverthemechanic8532]

Thanks mate for your positive feedback 😊 i think you can removed it with out removing the intake manifold 😉

[@ingenierodevuelo]

Great video, can you tell us, how did you noticed that your starter was failing?

[@oliverthemechanic8532]

Thanks mate 😉 in that scenario is just start clicking noise mate it won’t spend the engine I checked the wiring is all good so the problem is the starter 😉 cheers Oliver

[@jade4781]

Hey Oliver ,question, how do you get the red metal plug out to release the electrics??? Looks like a pin but i dont want to break it

[@oliverthemechanic8532]

I’m not quite sure what u mean mate 😬 just message me the time mate on the video so i can see it 😉

[@jade4781]

Its not shown in the video, but Ive found videos for that part specifically. Now im wondering your recommendations when reinstalling the manifold, gaskets etc.

[@Cholonwa]

Great video but audio is to low you need to speak louder i had to put headphones in volume on max because I cant hear you but all in all very well done video

[@oliverthemechanic8532]

Thanks mate for the positive feedback ☺️ actually my audio is quite loud already 🤔 I removed my audio when its not necessary or making speed up 😉 thanks again that i help you on a small way 😉

[@AOdetailing123]

Theres one way easier to change it. But i liked your video. Its helpful.

[@user-dt6jn2cn9r]

Thanks for the info, but. Just replaced the starter on a 2008 Lancer without taking off the intake manifold. removed the throttle body and large air intake hose. disconnected the starter. Then removed it from underneath. it is possible. hope that helps. I am not a mechanic, just a hack.

[@oliverthemechanic8532]

Thank also mate for watching 😉 The one that i did mate is impossible to do with out removing the intake because of the inside bolt of the starter no tools that can fit there on my opinion 😉

[@cindyquinones2873]

I just got my starter replaced but it’s not turning on at all, I was told by another mechanic that my starter wasn’t put in or tightened correctly & my intake bolt wasn’t tightened either. It’s been 3/4 weeks since my car has been down.

[@oliverthemechanic8532]

@@cindyquinones2873 you already checked the relay mate?

[@angelcardenas9323]

Do you know what that plate bracket thing at the bottom of the intake manifold is called?

[@oliverthemechanic8532]

Sorry mate im not quite sure what they called but its a bracket 😉 but if you want the real name you can call the dealership and ask 😉 cheers Oliver 😉

[@brendonbanfield575]

It's called a bracket

[@dong1228]

thanks boss i got it

[@oliverthemechanic8532]

Thanks also mate for watching 😊

[@user-ov9zy7pu4s]

Just want to mention this, as it’s a safety issue in the video, removing the fuel cap will release VAPOR pressure in the tank, but the LIQUID fuel pressure in the line will still be there due to a check valve after the fuel pump in the supply line. The check valve is meant to keep fuel pressure in between starts, if it didn’t, you would have an extended crank time upon start. It’s not like once the fuel cap is removed, there is no pressure in the fuel line, it will still leak, spray and cause a fire if a person isn’t careful. Definitely cover it with a rag when removing like the video showed and plan for it to spill.

[@oliverthemechanic8532]

👍

[@LuisMejia-cl1hb]

I replaced my starter , and didn't take the intake off , you have to move the starter left and right and than it will come off from the bottom

[@oliverthemechanic8532]

Mate maybe you’re is a different model on that video you cannot remove it without removing the intake 😬 there is no way that you can move it left and right 😅

[@LuisMejia-cl1hb]

​@@oliverthemechanic8532 yeah , maybe nice video btw

[@oliverthemechanic8532]

Thanks mate have a lovely day God Bless 😇

[@brendonbanfield575]

Your wrong Oliver

[@kil-0976]

Hi kabayan, do the manifold have gasket to be replace when removing it? Can u able to remove the intake manifold bolts without jacking the car?

[@oliverthemechanic8532]

Ok lng naman po na hnd palitan ang gasket as long as de po sya na damage sa pag tangal base po sa experience ko pero mas maganda po palitan 😉 mahirap po yan pag hnd na ka jack 😬

[@kil-0976]

@@oliverthemechanic8532 salamat kabayan, gsto ko sana DIY pero hirap wla ako malaking jack hehe hirap unscrew wlang lifter , need pa remove engine shield hehe

[@oliverthemechanic8532]

Opo mahirap po yan e DIY mas ok po mag bayad na lng kayo sa mechanic 😉 thanks din po sa panunuod God Bless

[@joeb7168]

I gotta change one.. what were they thinking why didn’t they design the intake to have an indent to wiggle to starter out

[@oliverthemechanic8532]

That’s my question also mate 🤔 maybe the engineer are angry when he did that 😅

[@joeb7168]

@@oliverthemechanic8532 musta been ehh 🤣🤣

[@alanfitzpatrick8280]

Engineering design so most people will bring it back to mitsubishi to have it done so they can empty your pockets

[@oliverthemechanic8532]

@@alanfitzpatrick8280 I agree mate 😉

[@joeb7168]

@@oliverthemechanic8532 I got it off without taking the intake off.. undid all the wires to starter undid bolts it wiggled between the intake and oil filter housing.. got the new one in the same way

[@zawiasc]

Good job

[@oliverthemechanic8532]

Thanks mate for a positive response 😉 God Bless 😇

[@tommycrunk3015]

What tools did you use

[@oliverthemechanic8532]

just only basic tools mate there is no special tools have lovely day GOD Bless

[@B2radford]

@4:49, just remove the bolts that connect it to the plenum. If you look on the body just below the bracket, you'll see an out of place extrusion. This is a wedge point. Loosen the three bolts on the top of the plenum, the two mentioned above, and the one above the oil filter. Stick a wedge between the bracket and the wedge point. The starter will now wiggle out. Gotta undo and redo the connections at this point. If you try to do the connections where it's easy, it won't go back in.

[@oliverthemechanic8532]

I never done that technique mate but for me that’s the easiest way to remove it 😉

[@user-igorok85]

there is no need to remove the intake manifold. Unscrew the "+" and it will fall out.

[@oliverthemechanic8532]

Can you show me a video mate what you mean or send me a video link that you will not remove the intake 🤔 it’s a big help to me if i will not remove the intake manifold 🥹

[@nicolasvasquez5021]

saludos...

[@oliverthemechanic8532]

saludos 🫡

[@Shmondaman]

😮

[@oliverthemechanic8532]

😉

[@keelanhuckstep]

manifold is stuck on, any ideas?

[@oliverthemechanic8532]

Mate there is no way that it will stock maybe there is a bolt that never remove just double check all the bolt and nut 😉

[@trevelbrown2557]

​@@oliverthemechanic8532 gotta love that low effort andwer

[@oliverthemechanic8532]

@@trevelbrown2557 i don’t know what u mean mate sorry 😬

[@trevelbrown2557]

@oliverthemechanic8532 when pulling the intake manifold from the top. There has to be screws connecting it. I know you addressed the screws on the bottom of the car but what about the ones on top? Are there any screws on the top portion of the intake manifold? If there is, what are the sizesm

[@trevelbrown2557]

@oliverthemechanic8532 or how you said you had to remove the throttle body brackets. Okay cool, how did you do it? What size millimeter do you need to do it.

[@manuelcastro6446]

Wrong year n modle

[@oliverthemechanic8532]

I dont think so mate 😬