Stealth-RO™: Installing the Pressure Booster Pump

[@truthisthevictory9278]

Thanks for the helpful instructions on how to adjust pump strength. Aquatec should ship a cheap 1.5mm allen key with the pump. On the bright side, I had the correct sized allen key.

[@bobbobbington6650]

Ternimal. We all heard you say it

[@milantr5754]

If we have pump,what do we need to install the high pressure switch?I want to buy a pump like this but I don't understand the reason of the high pressure switch?I check my bucket when it's filled up I will turn off the pump myselfe.can I get only the pump?my osmosis filter is taking the water out very slowly,drop by drop

[@deekshantsharma1934]

Sir, इस में कितने नंबर की star key लगेगी अंदर ओर बाहर प्लज कॉमेंट sir

[@stallonegardner1368]

Do you need a pressure tank for this to work?

[@syedsherazi7589]

very useful info .....thanks

[@jacquenettegills9412]

Good morning is the pump still available to purchase and where can I purchase from?

[@dhservers]

If someone was actually following along they would be putting the pump in the wrong direction of the arrow on top. But it was clear, I've never seen a two filter RO system before. Nice small footprint.

[@jasonpavlak2055]

Does the pump come with the alan key? Thank you

[@therealdealgrowz5891]

Will this pump also increase the outlet pressure from RO? I have a stealth300 and I need to connect it to my ice machine that requires about 50psi

[@jared1432]

I am hoping to get an answer on the same question.

[@therealdealgrowz5891]

@@jared1432 yo I bought one and it did increase the pressure but it made the inlet pressure too high for me. My water source was 60psi from the hose so that was enough for my RO. For my situation I feed the RO water to a 100 gallon tank then hooked the booster pump to the tank and added a pressure switch to the line. Hmu if you have questions

[@norcoatomik1]

@@therealdealgrowz5891 what's up man you may have just answered my question , so you can pull water from a reservoir with these pumps , whats the maximum psi produced drawing water from your tank using the booster pump ? I need to get around 60 or 70psi , pulling from a tank/reservoir just like you are Will this pump provide that ? I will be pulling water from a rain barrel and pushing it thru my RO system, so opposite of what your doing but the same difference really lol

[@mohansingh5309]

Booster pump head chahiye 7 screw wala.

[@mohansingh5309]

Kha milega.

[@norcoatomik1]

Will this work with zero pressure , like pulling water from a rain barrel ? ?????

[@13panda13]

yes! gravity feed.

[@norcoatomik1]

Can this be used if you have zero water pressure like pulling water from a barrel

[@bobbobbington6650]

No. Get a submersible pump

[@stanleydeciusresousayiti]

A zuanli pressure pump with 0 inlet pressure will be good too

[@deekshantsharma1934]

Sir, इस में कितने नंबर की star key लगेगी अंदर ओर बाहर प्लज कॉमेंट sir