Steam Deck Emulation with Gyro Controls! TRY THIS! SteamDeckGyroDSU

In the early days, we can just install SteamDeckGyroDSU on EmuDeck and Gyro Controls just work. Now it doesn't but you don't have to fear. You just have to do a few more steps.
Hope it helps you all out! Don't forget to LIKE and SUBSCRIBE!
Join our Discord: / discord
Support my Patreon: / grownupgaming
Switch Emulation Guide for Steam Deck: • Steam Deck Emulation S...
EmuDeck Setup on Steam Deck: • EmuDeck & Gyro Control...
0:00 Intro
0:20 Install SteamDeckGyroDSU
1:32 Test SteamDeckGyroDSU
2:26 Go to Gaming Mode
3:26 Gyro Setting for yuzu Emulator
6:32 Gyro Settings for Cemu Emulator
8:24 Gyro Settings for Citra Emulator
9:32 Outro
Disclaimer:
This video is intended solely for educational purposes. We do not support or encourage piracy in any form. All content discussed in this video is based on publicly available information and is used for the purpose of providing informative and instructional content to our viewers. We strongly advise viewers to respect copyright laws and obtain legal copies of games through authorized channels. We do not provide download links of any pirated content.

[@PinkgloRadio]

Omfg thank you! The 'cleared from parent' is what made it consistently work.

[@GrownUpGamingGUG]

You're welcome! 🤗

[@ronaldoboom111]

I've been trying to get this working for about 2 hours now, and your video got it working no problem. Thanks a lot for the video!

[@GrownUpGamingGUG]

Great to hear! Thanks for the comment! :)

[@GrushV2]

@@GrownUpGamingGUGhow do I change the motion, I have no external monitor and the buttons are out of screen

[@GrownUpGamingGUG]

@@GrushV2 try change the screen rotation, landscape to portrait or vice versa I can't remember. But you get it right? Turn the screen sideways so you have more real estate vertically.

[@GrushV2]

@@GrownUpGamingGUG you can change the screen rotation on a steamdeck?

[@GrownUpGamingGUG]

@@GrushV2 yes display settings. Right click on the desktop.

[@MrKernelkun]

Thanks a lot!! You helped me so much. Thank you!

[@GrownUpGamingGUG]

Glad to hear that!

[@MarioOrion-fd4sx]

If someone have a problem of a "drifting " gyro i mean the gyro turning all the way to left or right you just have to calibrate from the steam deck settings

[@GrownUpGamingGUG]

Thanks for sharing!!😁

[@Simon-jh1hf]

Thanks, it works :)

[@GrownUpGamingGUG]

You're welcome!

[@nottrevorallen]

if the button to link emuhook to motion doesnt show up for you, connect to an external monitor greater than 1080, make sure steam deck is using that resolution for external monitors, then open yuzu in desktop mode. move it over to your second monitor, open configuration, fullscreen, and there you go.

[@GrownUpGamingGUG]

Thanks for sharing 😊

[@triphazard2906]

I have an issue with the latest version of Cemu where my gyro drifts every time I boot BotW. I can fix it by recalibrating the gyro (set deck down on flat surface, check levels close to 0.0) but I have to do this every time I start the game. Is there a work-around or fix?

[@GrownUpGamingGUG]

I haven't played botw on cemu for a while. What's the version of cemu? Old version doesn't have this issue?

[@thebarbiter4644]

On Dolphin, when I change the device to DSUclient/0/steamdeckgyro, none of the other inputs work AT ALL. I can't even map the inputs, bc ONLY gyro works.

[@GrownUpGamingGUG]

I haven't used dolphin in a while, let me check and get back to you.

[@williambecton8833]

Hey can u help me im trying to add games thru emudeck but when trying to add it just say batch 1/7 and dont go pass that then i get kicked out of emudeck with a black screen

[@GrownUpGamingGUG]

Just put the roms manually to the respective folders.

[@didney_worl172]

Is there a method to use Gyro in Gaming mode without Emudeck? Since i have only the Ryujinx Appimage installed.

[@GrownUpGamingGUG]

@@didney_worl172 you can install gyrodsu manually.

[@paul-xg5mf]

hello in yuzu i see a different controle (a switch and not a gamepad) when i test motion it says sucessfull but i dont see "motion 1" and I cant test it

[@GrownUpGamingGUG]

I did what worked in the video. Maybe you need to follow closely.

[@devinsidell]

Will this work for RPSC3 eventually? I'm trying to play Super Rub A Dub and its a gyro only game.

[@GrownUpGamingGUG]

I don't play a lot of PS3 games so I've never really tried it out, but I think it's doable. I need to find a game I would play that needs gyro to test. i just play virtual tennis 4 and fight night champion for PS3 right now 😂

[@itzdcx7991]

thank you for making this I found it annoying that it wasn't working

[@GrownUpGamingGUG]

Yes, it worked before. I guess steamOS updates broke it somehow. Lucky there is a work around that make it work again.

[@carlosmelendez8317]

Do you have a tutorial on the best control layout for playing Cemu emulated games on Steam Deck?

[@GrownUpGamingGUG]

I just use the standard layout with gyro enabled. It's exactly the same layout as the original Wii u pro controller already. What needs to change?

[@cyraxuser]

Im playing Breath of the wild on Yuzu emulator. After checking your guide, I can't find the motion 1 settings.

[@GrownUpGamingGUG]

1) try maximize the yuzu emulator window and 2) play botw with cemu is much better!

[@syn9274]

Hey sir just wondering if you know why I can't open my yuzu mod directory like try click on it but the file to the mod didn't pop out ?

[@GrownUpGamingGUG]

I'm not sure, can you locate it manually?

[@syn9274]

@@GrownUpGamingGUG if u can ,can you paste me your path ? I don't know where to search it manually since there's like 2 different ryujinx (the normal one and the binary one ) it seems I can open the mod directory on the binary one but not on the standard one lol

[@GrownUpGamingGUG]

@@syn9274 i'm using yuzu not ryujinx in this video.

[@vicvh2892]

When i try to put my sudo password in emu i get "password not provided" when i click install. does anyone know how to fix it?

[@GrownUpGamingGUG]

open konsole, type "passwd" to setup your sudo password.

[@jeffsandroid6145]

Anyone find a fix for Yuzu not showing "cemuhook" as a motion option? Tested the server and it passed, changed gyro to mouse in Steam settings. But nothing seems to work. Only options are "mouse" and "Shake!". I reset Emudeck and saw "cemuhook" once but it never came back once I cycled through the options again. Super weird and definitely frustrating.

[@GrownUpGamingGUG]

So when you shake it nothing happens?

[@jeffsandroid6145]

@@GrownUpGamingGUG Not as far as I can tell. I'm also trying to get it working on Let's Go Pikachu but none of the settings seem to work. Odd part is that I can't ever seem to get cemuhook to show as an option at all.

[@GrownUpGamingGUG]

gyro shouldn't be set to mouse in controller settings, try following the video again. probably uninstall everything and start from scratch.

[@simply_vr]

​​@@GrownUpGamingGUG for me that option doesn't exist to shake

[@nolookjones]

it seems this menu is hidden and the only option is to tab, shake and hit enter on an off screen button! bind tab and enter to back buttons

[@NyctalopeDiurne]

Thanks bro. I’ve been able to complete a gyroscopic puzzle in a shrine (BOTW/Cemu). Funny thing: I only had to install the gyro drivers via Emudeck, give the Deck a reboot and that was it! I didn’t have to enable gyro controls in the Steam overlay, the thing was already functioning well. So thanks bro 👊 😊

[@GrownUpGamingGUG]

Good job! Thanks for sharing! :)

[@UofTguy]

I dont have the "cemuhook" option in yuzu motion setting. Only "shake!" And "mouse". But even shake switches back to mouse as soon as I go to hit OK. How do I get the cemuhook option?

[@GrownUpGamingGUG]

After installing gyro with emudeck, did you test it working on yuzu by testing the motion server?

[@UofTguy]

@@GrownUpGamingGUG Yes, I did check. It is receiving data. But I can't change the Motion 1 setting from "Mouse". And in that mode, gyro doesn't work.

[@stephnicole3078]

I have the same issue! None of these fixes work for me. Somehow it’s working in Cemu but not Yuzu.

[@UofTguy]

@@stephnicole3078 same. Works in cemu, not in yuzu.

[@vincentdidaniele892]

For me in Breath of the Wild, the "Aim with motion controls" toggle is grayed out and stuck on the off position? Any help would be super appreciated

[@GrownUpGamingGUG]

Which emulator are you playing it on?

[@vincentdidaniele892]

@@GrownUpGamingGUG It was Cemu, but I found out that I had to select the Wii U Gamepad to be used with Breath of the Wild for Gyro to work for it! So I figured that out at least, however regarding Yuzu, I have gyro working with the Deck handheld controls but when I'm docked and want to use a bluetooth controller (ps4 dualshock), despite going through these steps I can't seem to get the controller gyro to work. Still works great when in handheld mode when using the Deck though at least, but if you have any ideas I'm all ears

[@n0boddyy]

@@vincentdidaniele892 im on the same path. if u know something let me know

[@vincentdidaniele892]

@@n0boddyy I had to open yuzu and set the game's control scheme to Wii U Controller (not the pro controller) because the Wii U pro controller apparently didn't have gyro, only the tablet controller did. I set it do it only when BotW is running because the other games I have won't be playable if it thinks I'm using the tablet

[@helenhamer9700]

Thanks so much, nice easy tutorial!

[@GrownUpGamingGUG]

Thanks for the comment!

[@chewypinecone]

Alright here’s a head scratcher for ya. Your guide helped me get the gyro totally working as intended for yuzu in Tears of the Kingdom. I also want to play Breath of the Wild, but I was recommended to run it through Cemu. It should already be set up, right? Well it is, sort of. BUT- For some reason, all of my inputs *except* the gyro are working from my controller. The Deck lying on my desktop has the gyro. So when I hold ZR on my Dualsense controller to draw the bow, or press the right stick to open up the viewfinder, only moving the Deck moves the gyro. What do you think can be done?

[@GrownUpGamingGUG]

I'm not understanding your issue. You're using dual sense controller and steam deck controller? I only play with steam deck controller.

[@chewypinecone]

@@GrownUpGamingGUG I’m using the Steam Deck like a console. I have it hooked up to my monitor while I sit back with my dualsense controller to play. During trying to troubleshoot why my gyro wasn’t working, I discovered that when I moved my docked steam deck, it moved the gyro. One thing I tried last night was going into steam input and doing the cleared from parent thing for the Steam Deck *as well*, but unfortunately to no avail. Even if your experience is limited to only using the steam deck held in your hands, I can tell you the Gyro DSU thing works for other controllers and completely flawlessly for yuzu. But Cemu seems to have a strange issue with controller order and whatnot since the Wii U uses a gamepad. Except in this case it’s *mixing* which controller gets gyro control for some reason, while everything else is working as it should on the dualsense.

[@GrownUpGamingGUG]

I'll have to try out your setup later. Thanks for sharing 😊

[@chewypinecone]

@@GrownUpGamingGUG HEY!! I fixed it! All I had to do was *swap the emulated controllers of Controller 1 and Controller 2.* So under Controller 1, select Wii U Pro Controller (which the actual real controller doesn’t have a built-in gyro!), and give Wii U Gamepad to Controller 2. Boom, fixed! Just gotta disabled steam input and we’re golden (had to do this for totk as well). So now you know if anybody ever asks this again 😆

[@GrownUpGamingGUG]

@@chewypinecone good job 👍

[@mandarpalshikar]

Thanks mate !! For those of the viewers who are not able to Set Motion in yuzu.. as in they see either "Set" or "Shake" in Yuzu for Motion, this worked for me - Open steam settings in desktop mode (steam not system) -> Controller -> desktop layout -> edit -> Gyro behavior -> As Mouse. After that cemuhook will be in available in the controller settings. Then save in yuzu. For CEMU - I had to open a game in Game Mode then Open Controller Settings -> Edit layout -> Go to Gyro -> Select Gyro Behavior -> Directional Pad -> Add command ->Action Sets -> Cleared from Parent.

[@GrownUpGamingGUG]

You're welcome 😁

[@UofTguy]

Thanks for this. I dont have the cemuhook option, only "shake!" and "mouse", even after changing the gyro setting in steams desktop layout. When I click motion in yuzu, I can choose mouse or shake, but if I choose shake, it just switches back to mouse. Any help? How can I get cemuhook?

[@GrownUpGamingGUG]

cemuhook is not needed now. did you test the motion server in yuzu? did it succeed?

[@UofTguy]

@@GrownUpGamingGUG yes, it does read data when I test. But the setting for Motion 1 is "Mouse". Is that what it should be? Because it's not working in-game.

[@thorometheman5540]

Same for me any help?

[@nolookjones]

thanks i got it working finally... unnecessary hard setup for this it seems part of the config menu is hidden

[@GrownUpGamingGUG]

Glad it works! Thanks for commenting!

[@Pyromancer5]

how can i make the gyro work with Duelsence 5 controller it work on my pc with ds4windows but cant get the gyro to work with it on steam deck

[@GrownUpGamingGUG]

I've not tried.

[@Pyromancer5]

if do it trust me alot of ppl want to know how@@GrownUpGamingGUG

[@GrownUpGamingGUG]

if your comment gets more likes then i'd probably trust you.

[@Capitano10-01]

Hi brother I wanted to ask you about the gyroscope you have to try it in the shrines in Zelda Breath of the Wild if it works because there are shrines that cannot be solved without a gyroscope bye thanks

[@GrownUpGamingGUG]

i've tried it, it works perfectly. have you tried this method?

[@Capitano10-01]

@@GrownUpGamingGUG Still no, then I can't find the Zelda Breath of the Wild rom for Wii U. I have the one for Yuzu. Have you tried Breath of the Wild on Yuzu?

[@GrownUpGamingGUG]

@@Capitano10-01 Yes I've tried. Have you tried?

[@sillythewanderer4221]

@@Capitano10-01 I can help with finding a Wii u rom for botw, I would recommend the Wii u downloader app, and make sure to decrypt the game

[@ANKHZONE]

Если вы как и я не видите настройки гироскопа то вам нужно или повернуть экран вертикально на рабочем столе дека или подключить его к монитору с разрешением экрана больше чем на deck, в этом режиме у меня появилась скрытая настройка с кнопкой "встряхнуть" собственно встряхиваете и готово, после этого сохраняете настройки и можете запускать yuzu через game mode, там уже всё должно работать

[@GrownUpGamingGUG]

Thanks for sharing 😊

[@raycasillas4860]

I'm using ryujinx and still can't get it to work. I didn't think yuzu still worked tho. I might switch

[@GrownUpGamingGUG]

What's the issue with ryujinx gyro?

[@raycasillas4860]

@@GrownUpGamingGUG I've followed your guideline and it still doesn't work. I'm not very far into the game so I'm switching to CEMU

[@GrownUpGamingGUG]

Ok 👌

[@Victoria-md2be]

Can this work for Dolphin Wii controls?

[@GrownUpGamingGUG]

I haven't played any Wii games on my steam deck before. Maybe I will try one day and do a video.

[@aarepelaa1142]

Honestly emudeck is kinda broken. One time I launched it and it asked for an update, crashed and been broken since and I cant bother installing it again.

[@GrownUpGamingGUG]

Oh? Just use stand alone emulators for what you play then.

[@sadewasadewa1450]

Why my yuzu always stuck when i try set in gaming mode

[@GrownUpGamingGUG]

stuck how? is your internet stable?

[@sadewasadewa1450]

I'm offline mode, so that's the problem why my yuzu stuck in gaming mode when i try to configure

[@GrownUpGamingGUG]

did it work before? have you tried reinstalling emudeck?

[@David_Walt09]

Have you done one of these for dolphin?

[@GrownUpGamingGUG]

No I haven't played a game on dolphin that needed gyro.

[@David_Walt09]

@@GrownUpGamingGUG Aight, thx.

[@olivierdigne8989]

Not working direct on the SD noway to find issue

[@GrownUpGamingGUG]

I'm still using gyro with this method and playing totk of yuzu. You probably need to troubleshoot what went wrong.

[@olivierdigne8989]

But it s working on cemu botw,no on another code.... @@GrownUpGamingGUG

[@olivierdigne8989]

Not working with another code on yuzu , maybe SD have a problem…..@@GrownUpGamingGUG

[@masterbenjamin3348]

On my steam Deck it dont work. I install it many times but i cant See your gyro Settings 😢

[@GrownUpGamingGUG]

I was just play ocarina of time 3d the other day with gyro. Not sure what's the issue with you.

[@masterbenjamin3348]

@@GrownUpGamingGUG So I reinstalled EmuDeck on a new SD Oled. Everything updated. YUZU updated. Then installed via EmuDeck Gyro. Rebooted again. There is movement in the settings. When I click on the server test it works. When I start a game it doesn't work. Under controller settings in the SD menu, Gyro says None. No matter what I choose: stick, mouse, control pad. Nothing works. Even if I use your video instructions it doesn't work. I had a Steam Deck LCD here 8 months ago and it worked immediately without any problems without having to change anything.

[@GrownUpGamingGUG]

I don't have a steam deck oled to test it out unfortunately.

[@masterbenjamin3348]

@@GrownUpGamingGUG hey it works!!! i reset the YUZU settings. and now gyro works out of the box. But i cant switch x and y , A and B then gyro dont work again

[@GrownUpGamingGUG]

great~ :)

[@sentienttrees]

Ive tried EVERYTHING, MULTIPLE TIMES ON DIFFERENT EMULATORS, IM ABOUT TO PULL MY FUCKING HAIR OUT! It works for everthing else, joystick, mouse, trackpad, just not natively at all. Ive tried literally everything, even using other controllers with the steam deck. I'm at a loss, I dont understand and its driving me mad!

[@GrownUpGamingGUG]

So you can do all the steps? The UDP server test is ok? The emulator controller settings motion is on cemuhookudp?

[@sentienttrees]

@GrownUpGamingGUG yes, yes, and yes, motion controls won't emulate

[@GrownUpGamingGUG]

@@sentienttrees I have nothing else to show, but I hope you get it at the end.

[@sentienttrees]

@GrownUpGamingGUG Thank you, you are awesome! I think it's honestly a new update that has broken motion control emulation, and it might also be related to the new Yuzu lawsuit from Nintendo!

[@sentienttrees]

@GrownUpGamingGUG got it fixed, there's options hidden behind the controller map, the only to get to them was to hook up the steam deck up to an external monitor, then push down the STEAM button while pulling the soft L trigger to activate the gyro in the emulator.

[@tushkachudasama5640]

Mine still not working

[@GrownUpGamingGUG]

What happened?

[@mexxer6948]

I'm trying to get this to work on pokemon let's go pikachu

[@GrownUpGamingGUG]

Did it work?

[@deepjenvlogs]

Gyro is not working after updating

[@GrownUpGamingGUG]

What did you update?

[@deepjenvlogs]

I updated yuzu emulator and now gyro is not working what shall i do.. i did the exact thing what you have done...in the above video..

[@GrownUpGamingGUG]

did you test cemuhookudp server? is it successful? also in control settings, can you see cemuhookudp on motion 1 ?

[@Savage.735]

❤

[@GrownUpGamingGUG]

Thanks!

[@NelsonSebas]

Muchas gracias por la ayuda, estuve sin poder pasarme el zelda breath of the wild.

[@GrownUpGamingGUG]

you're welcome! glad it helped you botw gameplay! thanks for leaving a comment!