How to Clone Your Steam Deck SSD! The Easy Method!

[@steamdeckguy]

There is an issue with version 1.19 of balena etcher. Until it’s fixed, you’ll need to download earlier 1.18 version if you want to follow this guide

[@RichsuaveOSPUC]

Still didn’t work for me…please help

[@RichsuaveOSPUC]

Went back to an even earlier build of 18 but now when I went to flash it tells me failed target with an error message saying einval: invalid argument, open ‘/dev/sda’

[@AbatedFawn]

You say to use an earlier version, but the website doesnt allow you to do that. Awesome guide, thanks for wasting everyones time

[@steamdeckguy]

@@AbatedFawn prior versions can be found here github.com/balena-io/etcher/releases

[@RichsuaveOSPUC]

I found somebody on Reddit that suggested a code that I can’t remember but it essentially reformatted my ssd even though there was nothing on it…ended up doing it through Konsole which took over a day but eventually got done. Thanks for the guide.

[@wohntohn2874]

I don't understand that this guy did this tutorial for 8 min but other content creators does a video for over 20min?! He has my vote, great job!

[@Nysmo420]

This was by far the best tutorial I’ve seen for an ssd clone, took me 10 minutes to complete the clone and install it in my steam deck! Thank you so much :D

[@wrhader2203]

Great guide! Confirmed working. Date(UK): 21/07/2024 - Balena Etcher version 1.18.11 (Obtained from GitHub link in comments) - From 512GB to 2TB (WD SN770M). OLED Steam Deck and same enclosure. Cloning process took ~25 - 35 mins (75% of the 512GB was used). 👍

[@ThorGodofThunder420]

I will also confirm I just used the newest version on their website because I didn't read the comments first... thankfully their most recent version based on the github was from 3 days ago. I believe they fixed the problem. Everything downloaded successfully. I installed my new SSD, powered on and got worried at first because loading took a minute and it went to the original setup and login screen like a factory restore. Chose English and my time zone, logged into my account and everything is perfectly as I left it. I do have to redo settings and some things, it's almost as if it's a fresh install, yet all my games are installed and working (I've only tested elden ring so far). All my video files I've saved etc are there in desktop mode. All good! 👍

[@steamdeckguy]

Great to hear! Thanks for reporting back!

[@cole5981]

​@@ThorGodofThunder420this one really messed me up. Only 18.11 worked for me. I tried 19.23, 18.13, etc. but none of them would detect any drives.

[@theatan3427]

Just upgraded my steam deck today to a 2TB. Your guide really helped and was very easy to follow. Thank you!

[@daexter8971]

I am going to upgrade my storage tomorrow. Which version of balena etcher did you use?

[@davidmidcalf3470]

​@daexter8971 use the x64 version, then once you've extracted the zip file open balena by the item called "balena-etcher". Mines currently cloning now, will be changing drive over tonight once kids in bed 🤣

[@PoppaSimTV]

The balena etcher keeps coming up as a zip file and I'm stuck

[@eibol5885]

⁠@@daexter89711.18.11

[@crz15allan]

Simple easy to follow guide, I managed to clone my 500GB to my New 2TB drive without any issue

[@Deadlines-X]

This should have way more views its most hassle free way to do it and keep the games and settings same.

[@steamdeckguy]

Thanks appreciate the feedback!

[@ThorGodofThunder420]

I can confirm I just used the newest version on their website because I didn't read the comments first... thankfully their most recent version based on the github was released 3 days ago. I believe they fixed the problem. Everything cloned successfully. I installed my new SSD, powered on and got worried at first because loading took a minute and it went to the original setup and login screen like a factory restore. Chose English and my time zone, logged into my account and everything is perfectly as I left it. I do have to redo settings and some things, it's almost as if it's a fresh install, yet all my games are installed and working (I've only tested elden ring so far). All my video files I've saved etc are there in desktop mode. All good! 👍 Thank you for the guide! 😊 Edit: Also, decky is installed and all my decky settings/ui changes that I've noticed are intact as well.

[@PoppaSimTV]

What am I doing wrong the balena etcher on mine keeps coming up as a zip file

[@Cookiewott]

Thank you for the guide! Super easy to follow, very concise, and very short! Already on 2 TB, and very happy!

[@steamdeckguy]

Thanks for the feedback. Glad it helped out! 👍

[@heyitsthisguy420]

Following your guide was pretty easy, the LCD model i got on sale had different wiring so I only ended up having to unplug the power while i did the swap and i used the older version of the cloning software and everything went smooth, i erased all my games before cloning and just reinstall after the swap, I had a complete panic attack waiting for that first boot up but it seems perfect Got 2tb to work with now : D

[@artemisia4718]

I wish I could like this video twice. Very helpful, sir!

[@fyreu]

Thank you for this easy Method!

[@JoustonDion]

Phew, I was really afraid that you quit making vids. And now you're coming out of nowhere with a vid regarding exactly what I was going to do next. I ordered the Sabrent 1tb ssd just a couple of hours ago. Nice to see you're back. I really enjoy your calm and comforting voice during these vids. :D

[@steamdeckguy]

Thanks for the feedback it means a lot! Good luck with the upgrade!

[@fattiger6957]

thanks for this video. I just got a refurbished 64gb deck and a 1tb m.2 drive to go with it. I'm pretty sure I have a ssd enclosure somewhere around here.

[@fattiger6957]

Just finished installing the new drive and it works perfectly. I saved myself a ton of money. Seriously, I got this directly from Valve for less than the price of a Switch OLED. Thank you so much!

[@Mority90]

Thanks for the Idea with the cloning. I bought the same ssd housing and the upgrade worked flawless.

[@steamdeckguy]

Glad to hear it worked out for you!

[@firefightereli]

I tried a few guides. This one was the best.

[@weyj326]

Just followed your steps and it works perfectly. Thanks man

[@daexter8971]

Worked perfectly 👍! I used Balena Etcher 1.18.11 (even 1.18.13 wouldn't work for some reason).

[@backyardboating2109]

PERFECT guide! Thank you so much

[@7markhogan]

Great video, the x64 Etcher download is now a zip, could not figure out how to get it to work, so got an earlier version from softronic. Worked great thank you.

[@maritimemongo01]

Can you put a link for x64? I'm having the same issue. Thanks!

[@davidmidcalf3470]

​@@maritimemongo01just use the zip file, extract then tap on the item called "balena-etcher" worked first time for me

[@zadillo]

For what it's worth, if you extract the zip archive, all you need to do is click on the balena-etcher file and choose the option to Execute it, and it will launch fine.

[@kenbolz]

I have successfully cloned my new 1tb ssd using balena etcher. I replaced the new ssd in the SD, but when i boot up, it is stuck in SD logo. Any thoughts on this?

[@steamdeckguy]

First hold power button down for 10 seconds to force shutdown, and then turn back on again. If no luck, maybe check that ssd is inserted correctly. Failing that it could be a corrupted drive so you may want to try again.

[@kenbolz]

@@steamdeckguy I already fix the issue. what i did was I recloned the ssd, and it work flawlessly

[@Ste_365]

Is this a re-upload? I'm sure I watched and liked this video last night 😂

[@steamdeckguy]

Yeah, you’re not going mad! I removed the background music as it was too loud!

[@JediCrackSmoke]

Just to confirm - you didn't need to format the new SSD at all? That was handled by the cloning software? Thanks in advance.

[@kenoobe]

Correct, cloning will overwrite that anyways so no need to format.

[@blueish5063]

Hi i just bought 2TB ssd and connected it using an enclosure to my steam deck in gaming mode, is it normal for it to say 0 bytes free of 0 Bytes?? I haven't formatted it as per instructions of this video

[@steamdeckguy]

It usually would tell you the size. I’d check that you have inserted it correctly into the enclosure

[@blueish5063]

​@@steamdeckguy I'm such an idiot, thank you for telling me to check! It turns out that I didn't push the SSD chip all the way down enough into the enclosure to hear an audible click! I was worried about damaging it lol. It now reads the space properly on the steam deck! I'm going to clone my data now, thanks!

[@steamdeckguy]

@@blueish5063 haha happens to us all

[@TheMetalica427]

Great Video, thank you! Going to jump into this with my LCD Deck this weekend - just before I do, you mentioned there were some differences with the LCD versus the OLED version, is it just the internals being slightly different?

[@steamdeckguy]

Yes, the screws are different and also the placement of each of the internal parts. Personally I found the LCD easier. I’d recommend following along to the ifixit guide as it goes into more detail then I show in my video, and make sure to remove the SD card! Good luck!

[@TheMetalica427]

@@steamdeckguy Awesome! Thank you for the insight! Just subscribed to your channel, looking forward to seeing all the videos to come!

[@sunwheel666]

Nice to see you're back.

[@tommyg4842]

What the heck is up with your profile pic?

[@sunwheel666]

@@tommyg4842 it’s a scene from the short film ‘Begotten’.

[@tommyg4842]

@@sunwheel666 okay thanks, thought it was maybe ai, and I was making shapes out of nothing. Good to know it was good ol nightmare fuel lol

[@misterG2023]

THANK YOU!! I couldn't get it done using Konsole or other methods mentioned online, but yours worked perfectly. Quick and easy. 👍

[@girthbrooks830]

5/23/24 I have confirmed this works! My new 512 OLED unit Is now 2TB!! (1.8 TB without games installed) Thank you for this very helpful guide!

[@ClickRattler94]

If I bought an OLED deck, could I clone my current LCD deck's ssd and then put that in the OLED one and have it work fine?

[@steamdeckguy]

Yes. Just make sure your current deck is updated to latest OS version

[@RIPbiker13]

Thank you! I was searching the comments for this exact question. I just bought the OLED deck also. I have a program I wrote to run my VPN at startup and I really didn't want to do that again, and I wasn't planning on replacing the SSD. I have large enough drives to store and transfer.

[@FilipoLipos]

thanks, It did work fine I just had to dl older version of BALENA etcher as the new one is borked.

[@rann2300]

thanks for the tutorial! this is trully the easiest method (with ssd enclosure). i tried sudo DD in Konsole but my steam deck wont boot up.

[@RonGrethel]

Wait.... When did etcher offer a drive cloning feature!?!?!?!? No clonezilla or some random software that wants you to buy the "pro version"?

[@steamdeckguy]

No idea - I just spotted the feature one day, and gave it a go… turns out it works great! 👍

[@dazzlemi]

I'm planning on trying this clone method on my LCD deck as soon as it (ssd and enclosure) arrives from Amazon! I just wanted to verify that (as you mentioned in the video) you don't need to worry about partition sizes, etc. I'm just surprised that you don't need to boot to another drive first. There are other guides that show having to boot when using something like clonezilla. How does Belena Etcher handle this differently?

[@steamdeckguy]

I believe steamOS is automatically extending the unused space to fit the size of the disk. Tbh, I was expecting to have to extend the partition but was surprised when I didn’t….

[@TestSubject_828]

I apologize for my slowness but I would like to be sure if I understood correctly, this clone method copy all what it is (OS and games in case they are) of the ssd installed on de steam deck and put it on the ssd that is on the enclosure, after that you only need to make the switch of ssd's and it will work like it was the one that came with the steam deck, is this how this method works?

[@steamdeckguy]

Yes - exactly that!

[@TestSubject_828]

@@steamdeckguy Nice, It is actually a very convenient method, as soon as I have my steam deck, I will definitely use this method, thanks for the video I subscribe to this channel.

[@TomWilliams-r3s]

I have a 64gb so only have 1 game on the sd and i have 2 sd cards how would i go about doing this method ao i dont lose were i am on my games

[@steamdeckguy]

Follow the exact same process. Anything on your sd cards will just reload automatically when reinserted

[@TomWilliams-r3s]

@@steamdeckguy thanks for the reply so I would still have to have the SD cards in depending on what game I'm playing could I not clong both SD cards over as well as the main ssd?

[@MrFiolek]

What when i have dualboot witch Windows this still will work?

[@steamdeckguy]

I believe you may have to extend the partitions manually

[@MrFiolek]

@@steamdeckguy It's not a problem for me to increase them, but will they move and will everything work?

[@steamdeckguy]

@@MrFiolek I’ve not tested it, so can’t guarantee it will work, but I’d expect it to copy everything as is. You’ll probably find that the steamOS only shows the same size available that you had before - it won’t auto extend the partition. I’d try it - you’ve got nothing to lose

[@MrFiolek]

@@steamdeckguy ok, I took advantage of your guide a little from other sources and everything works, you have to clone the disk as in the video, then connect the copies to the PC and use a partition management program, I increased the partitions on which Windows was and the remaining unlocated memory must be moved next to the steam deck home partition and then automatically connects them, everything works great.

[@jasperlandman5718]

Is this the same for a regular Steamdeck?

[@steamdeckguy]

Yes, you can use the clone method for ANY steam deck. The only difference is when it comes to a physically swapping out the SSD since the OLED model internals has been revised

[@thatoks6498]

@Steam Deck Guy, My Steam Deck is the LCD 256 gb model, I had to factory reset my Steam Deck, Now all of a sudden my internal storage says 70 gb Instead of 256gb. I'm trying to figure out what in the blue hell has happened?

[@marshallkothrade811]

(General question to the public) I’m at where balena etcher is up and running. But. I’m at the part where it shows plug a source drive. There is no show hidden options. I just have a screen where it says “plug a source drive” with a picture of a SRC USB with an arrow that says. Plug a source drive in. I cannot select anything.

[@aliendisclosure227]

I have the same problem

[@steamdeckguy]

I believe this is an issue with version 19.21 of balena etcher. I was playing around with it earlier to try and help you out and it doesn’t work for me either. But version 18.11 which I used for the video does still work (not sure if you can still download it?) I saw some comments on GitHub from a few days ago for similar issue so dev is aware. Hopefully they will fix it soon as it appears to be completely broken!

[@CalvinRRC]

@@steamdeckguy 18.11 is available on github and solved this problem for me

[@michaelwilson8565]

@@steamdeckguy oh noooo

[@michaelwilson8565]

@@aliendisclosure227 did any of you recommend another solution

[@hayndoog808]

You mentioned doing this with a micro SD, do you have a video explaining how? 4:20

[@steamdeckguy]

I use a USB drive in this video to reinstall steamOS. You can follow the same method using a microSD card. kzbin.info/www/bejne/boTUoKCoebmMnNU

[@EridenEstrella]

I have run into a problem. When downloading the Balena Etcher from the official website the APPIMAGE does not appears, that's importante because right there's just a zip file, when you extract the zip there's a bunch of file but there's no clear way for how install Balena Etcher. I NEED HELP PLEASE!!!

[@EridenEstrella]

Best guide on the Internet about how to do this!!!!

[@PoppaSimTV]

Did u figure it out?

[@zadillo]

You just double click on the balena-etcher file in the folder after extracting the zip archive, and choose the option to Execute it.

[@TheAnimatedWonders]

Hello! Hoping you can help me out here! I want to stream games from steam deck to twitch and have thought of using obs but cannot use obs on desktop mode while playing games in game mode. Is there a way I can play games on desktop mode instead?

[@steamdeckguy]

Yes, of course. Just load up steam in desktop mode.

[@TheAnimatedWonders]

@steamdeckguy Thanks! Will emulator games work this way too?

[@steamdeckguy]

@@TheAnimatedWonders yes, everything will work the same

[@russellmay9841]

So I’ve started over. Followed your instructions completely. Etcher flashed and verified. Looked at storage and nothings changed, still saying 1.8TB free. This was a brand new WD_BLACK SN770M 2TB. I give up and ill have to start over which is ballache.

[@steamdeckguy]

1.8tb free for a 2tb drive is normal.

[@russellmay9841]

@@steamdeckguy Even it was cloned? I can’t get my head around this. I followed everything correctly but I’m still left with no space. 😩😩😩😩

[@steamdeckguy]

@@russellmay9841 what size disk are you cloning from? And did you have windows installed by any chance?

[@russellmay9841]

@@steamdeckguy1tb and yes to windows.

[@simliyah]

So a usb stick is no longer needed when updating the storage?

[@steamdeckguy]

you only need USB stick if you want to reimage (reinstall) steam OS. For this clone method you just need an NVMe enclosure.

[@maritimemongo01]

I'm having a hard time cloning my internal ssd to my 2tb ssd. When I use balena, it gives me an error message and it won't continue. Can you help??

[@steamdeckguy]

Are you using an earlier version of balena etcher? The latest version is broken, so that may be why you’re having issues.

[@maritimemongo01]

@steamdeckguy I downloaded several versions of 18 and it says it's starting, but never does..

[@adrianvega4817]

Any reason why the transfer speed is slow? Mine shows 30 mbs and 201 minutes lol. Im currently doing it. Im hoping the battery doesn't go to zero

[@steamdeckguy]

Depends on the size of the ssd you are copying and transfer speeds. Mine was pretty quick as I only had one game installed (for demo purposes)

[@adrianvega4817]

@@steamdeckguy weird it was slow with USB c to USB c. Put a dock and use USB blue port to type c. Speeds were 350 now lol.

[@jeanneymarsr6745]

is the clonage method also works with lcd models?

[@steamdeckguy]

Yes

[@misfitmazza663]

So, I've tried this over and over. turns out I'm getting the same results. I tried on a brand new ssd. I even tried on another one actually. Both different, both same results...and basically it can run perfect 1st try after cloning, but the second I attempt to restart, it gets stuck on the logo, any work around this?

[@misfitmazza663]

Side note, I went into the steam OS (minus and power selecting second option) and after all the gibrish, it said at the end "cannot open access to console the root account is locked"

[@steamdeckguy]

Sounds like it’s corrupt. I’d put the original drive back in (or use a PC) and create a recovery drive, then do a full re-install on the new drive.

[@misfitmazza663]

@steamdeckguy create a recovery drive? 🤔.. ok, could you give me a little step by step process guide? And you said put it in my original ssd?

[@steamdeckguy]

@@misfitmazza663 kzbin.info/www/bejne/boTUoKCoebmMnNU

[@misfitmazza663]

@steamdeckguy so I tried the recovery using my laptop and it got stuck with gibrish sideways saying error can't find command. Then it changed into this white outline "gnu grub" with 5 options to choose (steam os, advanced options, system halt, system restart)

[@evanescencelover44]

Hey! I got the 1.18 and it was almost done, then outta nowhere it says “flash failed!

[@steamdeckguy]

That sucks! Maybe try again - it might have got interrupted

[@marshallkothrade811]

I accidentally formatted it. How do I get it not, where this can work?

[@steamdeckguy]

Providing the drive shows up in balena etcher, it shouldn’t be an issue

[@marshallkothrade811]

It doesn’t recognize it in bale man etcher. It shows it on the steam deck. But when I pull up Helena etcher. It says connect a drive.

[@marshallkothrade811]

*balena

[@marshallkothrade811]

I’m stuck at “plug a source drive” in. I cannot get it to recognize the 64GB SSD in the steam deck. Not sure how to get it to recognize.

[@LaymanGamin]

I thought u run a command ? So would u consider this way better? Because I’m kinda a rookie but I can do what u did in the video. And I don’t need to reimage or anything?

[@steamdeckguy]

You can as I mentioned in the video, but personally I find this way more user friendly

[@luislemosloureiro]

Mine worked perfect. Minus non steam games and emulation station. That are not showing. Should I do something in desktop mode?

[@steamdeckguy]

That odd. Are they still installed? Id check if they still exist in desktop mode.

[@luislemosloureiro]

@@steamdeckguy thank you for the quick reply. Yeah I checked, they were still installed, and emulation station and roms, and so on. Just weren't populated in Gaming mode. Just had to add them again and everything is working fine now 😉 Great content. Thank you so much

[@michaelplcowan]

Thanks for the video. Unfortunately when i tried following it exactly everytime i clicked clone drive in balena etcher it just gave a prompt to connect the source drive. So i followed a reddit post using konsole and the dd command, which took FOREVER but did do the job. As for the rest of the video, i agree completely, tweezers suck. Chubby fingers for the win.

[@steamdeckguy]

Glad you did it. Annoyingly balena etcher is broken with the latest release. Hopefully they fix it soon!

[@michaelplcowan]

​@@steamdeckguyoh sweet, i thought i was just dumbass. Good to know it wasnt me.

[@Tomoe1868]

@@steamdeckguywhich version should we go back to, to avoid this issue? Right now i’m experiencing the same issue: Balena not recognizing my sd card.

[@russellmay9841]

How do I resize the disk? I cloned my 1tb to 2tb and I’ve not got any space. I’m a newbie

[@steamdeckguy]

You shouldn’t have to. Did you follow this guide to clone your disk? Also, do you have windows installed?

[@russellmay9841]

@@steamdeckguy I followed the guide. Yes I’ve got windows installed. 1st issue I’ve run into following all your guides.

[@steamdeckguy]

@@russellmay9841 look up a guide on how to extend the partition - it should be straight forward fix. By default, steamOS will extend storage to unused space automatically, but I am assuming because you had created your own partitions (for windows) it hasn’t done it.

[@russellmay9841]

@@steamdeckguyAny links to doing that please? I can’t find a good one. Thank you

[@gwrace]

The current version would not detect the source drive on the current version of the Steam Deck OS

[@steamdeckguy]

Yeah the current version of balena etcher is completely broken….

[@kyleroll95]

Nice,

[@steamdeckguy]

Thanks

[@michaelwilson8565]

need help when i press clone nothing shows up

[@steamdeckguy]

Sorry, it’s an issue with the latest v..19 version of balena etcher - it’s completely broken. It should still work with v1.18 if you’re able to find that version online

[@steamdeckguy]

Try this version: github.com/balena-io/etcher/releases/download/v1.18.13/balenaEtcher-1.18.13-x64.AppImage

[@michaelwilson8565]

Thank you for all the videos you posted to help me learn and understand my SD Oled I've used sudo dd for cloning worked so far

[@anyhumanbeing]

@@steamdeckguy how do i install after downloading it? its asking for an application to open it

[@anyhumanbeing]

Nvm, I figured it out. I had to right click, go to properties, and execute. Then run on konsole.

[@PoppaSimTV]

Balena etcher is downloading as a zip file

[@steamdeckguy]

As per the video, download the app image version

[@iamsomewhere]

NOT an easy method! I did each step EXACTLY as in the video. Even downloading the older app image of Belina Etcher. My new 1TB drive is showing in my Steam Deck as the old 512GB. It “cloned” the size as well. Not happy. :(

[@steamdeckguy]

Did you have windows installed on your 512gb drive? If so, you’ll likely need to resize the partitions manually. Otherwise, steamOS should automatically extend the unused space

[@iamsomewhere]

​@@steamdeckguy No. Stock 512GB OLED model. And a brand-new Corsair MP600 CORE Mini 1TB M.2 NVMe I picked up on Prime Day. Didn't format it, as instructed in your video, but verified it was showing correctly (1:36) before booting back into Desktop Mode.

[@thescreamingsoap]

@@iamsomewhere idk any better solution other than just re-install the whole os but if u dont want to do that then u cant go to desktop mode, launch KDE Partition Manager and try to resize it, if you're getting error then just create a new partition from the unlocated space and just.... live with it.

[@iamsomewhere]

@@thescreamingsoap This is basically what I ended up doing. I booted into the BIOS, completely wiped everything, then reinstalled SteamOS via USB drive/Deck Image. It was a pain, but at least things are working correctly now, and the drive size is showing as it should.

[@samladlow1]

this did not work for me, my steamdeck wont boot now

[@steamdeckguy]

Hold the volume down button during boot, and then check that the ssd card is showing up as a boot drive. If it doesn’t, it means you have not connected the SSD properly. Otherwise, I’d suggest putting your old drive back in and either retrying, or doing the reimage method (I have another video showing how to do that)

[@samladlow1]

@@steamdeckguy I have the new SSD in now and working but had to wipe it to get it to boot from usb. I’ll just have to re do my settings over time, unless there is a way of copying over stuff from my old drive

[@shattia]

@@samladlow1 Same, with the cloned ssd it is not booting at all even though the ssd is been detected from the BIOS

[@samladlow1]

@@shattia I booted from usb and just re did my settings, the only tricky bit was getting yuzu to work again. But I’m all sorted now. I just did it all gradually

[@shattia]

@@samladlow1 I just wiped it and reimaged the sd. Emudeck was already on the external sd so everything is working just fine already. I just need to Download all the games again.

[@Glatting]

"easy method" "ok now you're gonna need to buy ... -" okay bro

[@steamdeckguy]

No worries bro. If you don’t want to buy an enclosure then follow my other guide to reinstall steamOS - I’ll warn you though you will need to buy a USB drive or micro sd card…personally though I recommend getting an enclosure so that you can use the old SSD as an additional storage device.

[@DatHondaBoi223]

He said easy, never said free…. Quite obvious if you’re wanting to clone a drive you’re gonna need some way to connect the nvme externally lol.

[@blackhippy3638]

Are you slow? He didn't say it was going to be free. He said it was an easy method. Which it is 🤦🏿‍♂️

[@DatHondaBoi223]

@@blackhippy3638 he edited his original comment… are you slow?

[@blackhippy3638]

@@DatHondaBoi223 huh? My comment was for @Glatting(the og comment). Not you. I'm agreeing with you