Steel Shafts Vs Graphite Shafts For Mid Handicap Golfers

[@jimyang7303]

I disagree with the comment of "sticking with steel shafts" if you're looking to improve your game. I believe it would have been more beneficial to the viewers not to add to the stereotype that steel is better rather the point of golf equipment is to get properly fitted. I'm a 7 handicap and have played graphite for most of my life. I was fitted to graphite due to swing tempo/better trackman numbers (vs Steel) and personally I prefer the softer feel of graphite at impact. People should just get fitted and play whatever makes them feel the most confident on the course!

[@Gjmouen]

i feel the better player uses steel shafts, leave the graphite for your woods

[@garygratzer9670]

I enthusiastically agree with James. Always enjoy your videos but this struck me as a myopic conclusion.

[@BayouHotBoy1]

@@Gjmouen Bryson uses graphite shafts

[@Gjmouen]

@@BayouHotBoy1 yeah he just lost to Patrick….

[@BayouHotBoy1]

@@Gjmouen Bryson will be a legend before his career is over. Patrick, not.

[@terrywright6571]

I am 74 and had a fitting by Mizuno and almost expected to be recommended graphite but my best shots came with steel shafts with stiff flex. Get a fitting is the answer here. It is the same as blades v cavity backed clubs, or irons v hybrids you have to try them yourself to see which you like. Nice swing Mark.

[@davidlum8313]

I went to graphite about 14 years ago, but not for ball speed or added distance. I was having tendinitis issues in both elbows. I did it mainly for the shock absorption qualities. This past summer, I was looking for a change, so I tested several irons (steel and graphite) and got a fitting. I wasn't thrilled with the recommendations of the clubheads, so I ended up taking my last set of steel shafted irons (forged) and getting reshafted with a premium graphite shaft. I probably saved over 50% of the cost of a new set and am hitting a forged head that I loved long ago. I'm a senior golfer at 65 now and I have become accustomed to the graphite.

[@larryorrman5235]

I changed this year from Taylormade steel shafted irons to Taylormade Qi Irons with Fujikura Ventus TR Blue graphite shafts. Graphits shaft has given me more distance and more accuracy. Graphite is lighter, easier to swing and increased my clubhead speed. All around graphite has made a huge difference in my game. I'm a 72 year old with a solid 9 handicap playing across multiple course at an average of 6,100 yards.

[@elianth.70]

Nice work, sir. 🏌‍♂️

[@keithkatz1350]

70 years old play mizuno jpx 900 with graphite regular flex 70 gram project x Easy on the hands and joints do enjoy the steel in my 50 54 and 58 vokey 7's Is Mark really Eric Clapton😜 Keep up the good work gents cheers from NorCal

[@charlesrohl7635]

Love this ! Case and point; I'm pushing 63 and have played graphite for quite awhile. Went the Mizuno optimizer, around 5-6 times, and always came back w/steel shaft(115-120G). Around 80 mph club head speed (7iron) but my tempo is a little on the down swing. Really wanted graphite shafts, but succumbed to the fact to give away to technology. 919 HM's, w/115G reg project x rifle shafts !

[@krabboy22]

I’m telling you right now the way they make graphite shafts now days , More people will be switching to them for longevity and stability. It’s just easier on your body to use them.

[@rollupthefruit7798]

i agree, you see many tour players on the PGA and Euro tour using graphite shafts... Sneads with the Steelfibers, Kouch using KBS graphite (proto?)iron shafts.. for the average guy or girl it makes it easier to not have to go at it so much... I see great things in the future with the KBS proto's and the SteelFibers shafts, i see srixon using SteelFibers and they look just like steel iron shafts. Great point Brooks!

[@InbredJed82060]

Still bit happening

[@1ifbyland2ifbysea]

I have used graphite shafts since I was about 15. never switched back other then a couple random clubs I have picked up a long the way. now a days I use a senior graphite shaft

[@quadrider5]

Good call…should be happening soon all Bryson uses is graphite works for him

[@2Eaglez]

As a single digit handicap Senior (age 73), my observations are: 1. Spin rates are over rated for those who have slower swing speed. 2. Older golfers usually have hand and/or joint issues. 3. Senior flex steel shaft weigh at least 100 g. versus 50, 60, or 70 g. for graphite. With these three things in mind, graphite shafts are almost always better for seniors.

[@ikigai47]

Well sure. Everyone pretty much automatically expects seniors to use graphite. They go hand in hand

[@tommyh5540]

Congrats to Mark, your swing is lovely! One thing I noticed in the video: When one sees the club in close-up lying on the ground (e.g. at 2:59), it appears to me it is angled upwards quite a bit? Is that a correct fit? I would have thought it should lie more flatly on the mat? Anyways, thanks for the good video, James!

[@packrat9433]

This is an old comment, so my repy is really for newer golfers reading the comment above. My understanding is that playing with the club head flat is NOT what you want. I got better results when I went to the angled lie as shown by Mark. I forgot the techincal reasons why angled is better - but my contact improved greatly by making that change.

[@ThePNWRiderWA]

I have used both graphite and steel over the years. As I am an older man I have a bit of arthritis here and there and I don’t like the hard feel from some steel shafts. However I have settled on the lightweight Nippon steel shaft. They do not seem to cause as much stress on my joints as the heavier steel shafts. Personally I have come to the conclusion it is more of the weight of the steel shafts that cause me issues then the material

[@guitarMonke]

This test shows that no matter what club/shaft you use, that ability to hit the ball in the center of the face is what matters.Look at the smash factor and it shows more of the story than what shaft combo you are using.

[@randoshus3762]

I recently went to regular graphite from stiff steel blades. The stiff steel forces you to sharpen up your ball position and release. The regular graphite forces you to smooth out your tempo and keep your hands in syc with your body or else you'll spray all over the place and toe it a lot. The best advantage of steel is less toe droop.

[@grigsbypoland3203]

Enjoying watching Mark's journey. Looks like you're right - you might need a new mid-handicapper next year but in the interim on course testing would be fun to watch. I'm 67 with an 85-88 mph driver speed and when I got back into the game after a 15 year hiatus I went straight to light flex graphite shafts. (My previous set from 15-20 years ago is/was stiff steel with forged heads). My logic was they might be a little whippy now but I'd grow into them as my physicality degenerated further. Like Mark, I immediately noticed how much heavier the club head felt but I've learned to deal with it (I think). I'll definitely get a fitting if I transition to a newer more expensive set of clubs in the future and after watching and listening to Mark, I will be more open should the fitter recommend steel shafts.

[@billbel6573]

Near the end of the video, you mentioned about using graphite in a blade. Some years back, I re-shafted a set of Nicklaus Murifield Blades with graphite, in the same flex that I was playing at the time. They played beautifully, as accurate as the stock steel shafts; they were about 40gm lighter - of course I was 8 - 10yds longer. Loved those irons, so soft to hit & pretty to look at, not slighting how they performed...

[@billbel6573]

Was it the arrow, or was it the Indian???

[@209coach]

Lydia Ko was playing the KBS TGI 80 graphite shaft and played tremendously well with them. KBS graphite shaft has performed excellent for me as an 8 handicap with pretty good clubhead speed. Graphite in irons technology has improved greatly in the last few years.

[@fit2yougolf926]

Always interesting to see tests like this using a single subject...often more helpful than a big data set since the golfer can offer their subjective thoughts. Related to your purpose here, lightweight shafts (graphite or steel) don't always produce more speed over heavier options in my experience. Graphite shafts are sometimes preferred because of feel and the different torque offerings compared to steel. But ultimately your video supports the importance of getting fit!

[@JamesRobinsonGolf]

Agreed

[@davidleigh2573]

My golf partner was fitted for Ping G700 with graphite shafts. It has changed his game. Longer and more accurate. Now goes one club less to avoid the overhit on par threes. I am still not sure as I felt a lack of connection between between hands and clubhead.

[@davidgleason7245]

Yes, video of on the course play!! Thanks guys. Leaning a lot, but most importantly I’m enjoying golf more; more good shots in my rounds.

[@GDJ1957]

Hey James, why does Mark not appear in your videos anymore?

[@Calmdown1354]

Just been fitted for a new set of irons, by a proper club fitter. We tried out graphite shafts last. Only as I found with the steel shafts, I lost the perception of where the clubhead was. Mainly as the new cobra forged tec irons have a hollow foam infilled head. The difference was immediate, distance and accuracy. I would have never thought to use graphite in my irons, as a mid handicapper still in my 20's, and was shocked by the results. I think there is a stigma around even asking to try them, but clearly the numbers don't lie. Another plus is the graphite ages mutch better than the chrome finish on most shafts and offers you the opportunity to match them with hybrids/ fairway woods. Definitely worth a try I think!!

[@misplacedcaper9662]

The finish on my 15 year old TT Black Golds is still flawless. The finish on any quality steel shaft will last a lifetime. I have had graphite shafts develop bag wear within a couple of years.

[@hsup11]

Mid handicapper here and I had a bad shoulder injury and playing graphite feel so much better on my body. I’d only recommend the change for reasons like mine. And bonus fact I play blades in my graphites and I love them!

[@ngillam01]

I bought a set of graphite shafted irons with a 3 wood and driver about 25 years ago, I got down to 5 for a while, but too much commitment to keep it there. After a 15 year break, have re-started golf, I can still hit them reasonably well getting about 200 metres with my 3 wood - fairly straight too. If you have a set of clubs that work well, then use them until your HC is as low as it will go then consider a change.

[@jimaverill1659]

Yes! Please test on the golf course....

[@garynewman2935]

Been using graphite on my ping I 10’s for over 10 yrs. love them, easier on the shoulders and elbows I think.

[@spi9177]

I'm with you on that comment

[@albertfebry]

"I can't feel the gap between hand and the club head".. I'm agree with mark.. That's my problem when i switch from steel to graphite..

[@williamcassidy8679]

Like many of the videos like this, wish there were more for Average Golfers. But, they all have something to offer. I'm 70, (not strong) have had/tried many different sets. Irons are my favorite part of the game. First, I think lie angle is one of the most important aspects, I ordered original set of 790's, had them fit by Taylor Made rep who was at store that day. When I used them they just did not work well for me. Talked to guy at golf store about what they were doing and he said sounds like lie angle is off. Sure enough, even though I was fitted they did not come with correct lie angle. I have two sets I use now, mixed P-7 Srixon P-785 with Modus 120S and 5-6 are P-585 Modus 105S, they are very accurate for me, other set is Callaway CF-19 with Recoil 760 F3 (which are considered regular flex), and I am almost as accurate with these as well, big surprise. (Graphite for irons has come a long way just in the last 2-3 years) But, this is the first set with graphite that I am accurate. (Both of these sets were barely used, both about 1/2 price of new, rarely buy new) So steel or graphite can work fine.

[@banditbaker1675]

Interesting vid, but I am not sure that I followed your conclusion at the end of the vid. If Mark's handicap and ball striking is improving I don't see why this would automatically preclude him from using graphite shafts. Because of the manufacturing tech used in making graphite shafts, designers are able to produce a wide range of weights, stiffness (the stiffness can be varied through the length of the shaft) and bend profiles. Rather than just giving Mark a stiff graphite shaft I would like to see him get fitted into the correct shaft (weight, flex, flex profile, bend profile and torque profile) by an expect club fitter. I am sure that he would be amazed at the improvement in consistency that he could make with the correct shaft.

[@ChuckS9A]

That 1st strike was ace! Appreciate the video, thank-you

[@walleyewannabe]

I love Marks comment about not looking for distance.. It's no good nailing an iron 20 yards longer than your normal distance unless you can do it consistently. What us amateurs need to practice is distance control. What I do when I practice is vary my club selection for a certain distance so I can practice distance control. Say your average distance with a 7 is 160. I'll also try to hit the 6 iron at 160. you would be amazed at how much you can control your distance if your not trying to hit your maximum distance on every shot... love your vids James look forward to more with Mark

[@Brettymac24]

Good video pal .. as someone whose a mid handicap like mark, I would play the shafts that give the most consistency and for me the steel shafts just feel more stable at impact

[@martynedwards1493]

I was recently fitted into irons with a stiff tip graphite shaft, as I hit down on the ball it was much better for launch than the steel shafts I tried out

[@davidrichard4300]

James...Mark, excellent test. I would have loved to see the dispersion compared. I personally play graphite in all my clubs except my sw, lw and putter. My personal comparisons showed me that I was more consistent with my dispersion, plus I loved the feel. I actually play single length pinhawk from 5 to gw. I can not wait to see Mark's fitting vids. Will he be trying all the brands like you did? Also even if he goes to single digits, don't get anyone else, mark is amazing with these vids

[@neilhibbert5201]

Hi wood love to see more graphite see iron.

[@gssheriff7278]

Been having issues with my right elbow arthritis or tendinitis and find the graphite shafts feedback on misshits don't vibrate up through my hands to arms.

[@grigsbypoland3203]

Yep. Anything to minimize pain is good.

[@kevinwood1722]

Arthritis in the base of my thumbs and carpel tunnel in my hands made graphite the clear choice for me with my Ping g400s I bought a year ago. No pain from these but trying to work the ball when you need to is almost impossible.

[@keithfinley2939]

Maybe try a 95-105 gram graphite shaft? Like recoil etc

[@ckmjackofalltrades]

My guess is that those last two shots would become the norm once Mark was used to the "feel" of graphite and was confident enough to swing freely.

[@joeperez3520]

I found the saem problem as Mark when I decided to get graphite shafts in a set of irons: They felt like sledgehammers, massively heavy. When I had "tour weight" heavier graphite iron shafts installed, they felt much better. Something to consider about PING irons and steel/graphite shafts. I was told years ago that when PING produces iron heads, the weight of the heads themselves are different if they are meant to be used with steel or graphite shafts. I had a set of PING i3 irons with steel shafts, and wanted to have them changed to graphite, and I was told it couldn't be done because the heads were specifically meant to be used with steel. I wonder if the same is still true, and that's why Mark could not feel the graphite shaft at all.

[@philhyde4396]

With the clubs available now it's easy to find any combination of lie, forgiveness, and desired distance with steel shafts and graphite is certainly the right answer for we who suffer from arthritis. Feel and control it seems is where the concern is when talking about graphite. Will adding graphite to a game improvement iron mean a considerable loss of feed back & control and consequently slow a golfers progress on the downward handicap trail? How about a test to see if you can work the ball with graphite shafted clubs?

[@pahhaw4251]

Anytime you make a change in your club(s) you’re going to recheck for consistent accuracy. Give me an extra 10+ yards on a 7i ANY DAY! I’ll figure out not to make that work in my game😂

[@rayrapp8929]

Interesting James and Mark, if not too enlightening. Lighter club equals more clubhead speed. One thing, Mark is obviously a big lad with a decent swing. I wonder how much better a graphited shafted club would work for smaller people like me at 5'6"? I play off 6 handicap but always find distance with my irons a challenge, especially the shorter (heavier) irons.

[@MarcoFD]

i use a combination of both, steels very nice for chipping and pitching, but i do like the whippy feeling of a graphite shaft when i want to knock them further.

[@garyoshiro9874]

James, this was a great vid! a much older but a mid-handicapper like Mark, I have always wondered the diff between hitting a steel vs graphite shafts and recently retired, I'm looking to get fitted for some new irons. How about having Mark in more vids testing (mid/high handicap) irons..!? What's your opinion on spending the $ on getting fitted for irons..!? Thanks again for the vids!

[@jeremystafford8374]

Mark's ability to adapt in just a few shots proves he's not a mid handicap golfer any longer ( well done mark ). I believe graphite shafts can actually help many golfers of differing age and abilities, However a thorough fitting is essential . Really good honest review, thanks for your efforts.

[@nicted9308]

I think you both are becoming a good double act on KZbin I enjoy watching the channel when Mark is on. I have used graphite shafts for a long time now as I have Tennis elbow and they make it easier for me than steel.

[@roguemodel]

I am 58 years old. I was fitted this year for new clubs. The pro suggested we compare steel to graphite because of my age. And, the fact I have had 6 back surgeries and 3 low back fusions with a left shoulder replacement in Jan. 2019. He thought I might do better with graphite. Now, I am so very lucky just to be able to swing a club let alone play. So you know, the surgical techniques and precision for these surgeries have been advanced from even 5 years ago. Anyway, after testing, I chose the steel shaft, specifically the KBS tour 90. I exhibited better control and distance. I am still quite strong in my swing and have replaced hip and pelvic rotation with upper body strength. The point is, get fit by a pro. Everyone is different. Don't rule anything out until you try it. In fact, I purchased the Titleist AP1 in 4,5,6, Titleist AP3 in 7,8, and blades for my 9 iron and PW. I am playing extremely well at a 5 handicap. Prior to my car accident, I was a scratch golfer. Life changes, except the changes and move forward.

[@JMChick47]

I'd love to see Mark take the graphite shafts to the course to see how he fairs. I switched to graphite this year and I'm still undecided if I'm better off or not. But then, I haven't been able to play very much this past year either.

[@richardking4725]

I’m not sure that this was a very fair test really as Mark is a well established steel shaft user, so the graphite shafts felt unusual to him. It was clear that as he took more shots, his distance did improve quite a bit with them. For me though it is more about how the club feels when played and steel shafts just give me an unpleasant hard knock feeling at ball strike , which graphite cushions totally. I imagine it would be quite a big deal for anyone well used to one kind of shaft to change to the other, so agree for Mark changing shafts was not right, as the advantage may not be that great, and he is not unhappy with the feel of his existing clubs. Equally I like my graphite shafts and would not want to change.

[@seanedwards1838]

I use to use grafite in my irons, and honestly thinking about going back to them

[@mariocastillo813]

I use graphite 3i to 5i. 6i to PW I kept steel shaft. I feel (personal use) that I get a slight bit more control with the steel shaft.

[@jimmyculp8756]

Mark, unless you want to stay a mid-handicapped player, you might want to think about adding some distance. This video clearly shows me that the graphite shafts work much better than the steel. I t seemed you were hitting them longer and straighter. If the seven iron is to much, hit the eight? I'm 62 with elbow problems. I've just went to project x catalyst graphite shafts with cobra forged tec heads, I might not be able to hit them but they will place in a beauty contest!

[@Johnathan909309]

I shoot low 40s to very high 30s and I must say I love graphite shafts. I get a lot more spin and the weight is more in the head unlike steel I feel as though they do great!

[@simonhobbs9097]

Definitely worth a test in the 'real' course world.

[@martinmaughan2103]

Strange after gaining 5 more yards with the graphite shaft - Mark can say that he's not looking for distance?! The I500 is a distance iron! Myself I play a 33 degree Callaway 2014 forged Apex Pro 7 iron with the UST Recoil 110 F4 that carries 155 -160 yards which I find very playable and good feel too.

[@kevinwood1722]

Been using graphite shafts in my irons for 25 years now. It’s easier on my body now that I’m in my 60s. Lighter for you guys who lug around your clubs, I use a golf cart because of my knees. I just want to hit the ball in play so I’m not worried about precision distance control. Graphite shafts are pretty good now.

[@ianstyring9602]

Guys, you have to compare similar weighted shafts. I currently use Accra Tour i110. I had a Titleist fitting recently and the fitter couldn't beat my gamers in any parameter with all of the steel shafts in his demo truck. Played graphite from day one.

[@Fractalgeek]

I got graphite shafts for shock absorption after an injury, and they were lighter. But I ended up getting the steel weight heads, as that was what made the shaft load up for me. Not a common option, I suspect...

[@SAABguyMD]

Thanks for the comparo! I am trying to locate a used 4i to round out my set and I can only find it in Graphite..

[@marklogan646]

👍🏻Nice one guys!...Definitely would like to see on course play with the different shafts.

[@ReedServices]

So … where does Mark lose strokes with that swing? Like you said, his short game must be horrid. 😉

[@chrisgilligan4968]

Mid-handicap could be a 12 or 13...they mentioned that he might be down to single digits soon....he hit 12 shots and 3 or 4 of them were so-so to poor. if you mess up 6 approach shots on average during your round and are only decent at chipping and putting - the strokes start to add up.

[@damarapoledna3636]

I like it when an amateur is used to evaluate equipment as a pro has the ability to manipulate any equipment to do what he wants, to a certain degree.

[@berntbjrnsen4739]

Very informative update Regarding shaft technology development last 10-15 years, i lern that steel vs grapite difference is not lenger same as it was. I am a senior and I have played My custom fit callaway grapite shafts the last 12 years, but no I consider light waight steel. Thanks.

[@jerryreynolds4731]

When should a player change the flex of the club???? Age??? Swing speed???? Distance????

[@cwbeginnersbushcraft]

Dispersion if more important than distance in my opinion. Graphite shafts have lots of benefits but, for me, just aren't as consistent. Great video though pal👍

[@Mr.mallaer]

I tried these clubs. Did not like the feel. Tried the new i210 right after. The later one felt like butter and had much better ball flight.

[@lewisbayesbrown115]

I found steel shafts made the joints in my hands ache. So I bought Taylormade regular graphite but accuracy was rubbish. I then bought Mizuno with stiff shafts (I do not have a fast swing) and happy days! Steel accuracy with graphite feel.

[@willywantoknow2563]

I'm watching this cause i have the opportunity to grab some taylormade burner (bubble shafts) irons.... Problem is i like steel... I'm used to it and if i want to improve myself in the game... Stick it out with steel. (My old school wooden woods are steel shaft, i love the feel when you connect.. makes me feel like i did the shot not the titanium club)

[@RCarlitos]

Greetings, how much should the graphite shafts be cut without affecting the flexibility? I bought a Senior rod and cut it to size -.5 for my size and I have good control but they don't feel like senior flex. What could I have done wrong? I hope for your professional help. Thank you.

[@philipoftorquay]

An interesting comparison, is there a heavier graphite shaft you could try such as a Mitsubishi-Rayon Kuro Kage TiNi 105?

[@JamesRobinsonGolf]

I’m sure there is mate.

[@SCDrJ03]

Would love to see the graphite shaft be closer in weight to the steel. These two are over 20g apart in shaft weight.

[@tomduckworth8335]

I don't want to be negative good idea but why didn't you use the Ping i210s to be a little more consistent. One could ask is it the iron head or the shaft that make for the wide dispersion front to back? As to the weight there are a number of graphite shafts that get pretty close to steel I went from Nippon Modus 105s to Project X LZ graphite and didn't give up too much weight. I have yet to see any graphite to steel tests where the testers try to get shafts that are at least similar in weight. I just wish it had been more apples to apples comparison Still a thumbs up for trying Love your content..

[@iankoch956]

Hi James and Mark, nice test, was wondering if Mark would consider the graphite if he continues to hit them longer, then surely going up a club 7 to 8 would allow him to improve his accuracy and his score could drop further by reducing his dispersion ( or am i barking up the wrong fairway) cheers and merry christmas to you both

[@robertsalazar5874]

Please Please Please test out at the course and use some good spin balls like Prov1 or Srixon Zstar or Callaway Chromesoft...enjoyed the review. I hit still fiber shafts it would be interesting to see if mark would like a shaft that that?

[@ShepMike3934]

When I swapped to Mizuno graphite shafts the new normal was longer and lower but still stopped.

[@dummyaccount5857]

i know it is old video but i looked up the specs of the i500 and the 7 iron is lofted at 30.5*. that is 1.5* stronger than my 5 iron when i started playing golf back in '85. so not quite sure if it is accurate to say that those are massive 7 iron shots (170 yrds) when your 7 iron is lofted stronger than the old 5 irons 1960s/70s era. we could probably say that they are massive shots for a 30.5* lofted club and not necessarily a 7 iron. today's 7 irons are lofted at 29* or 30* so those should go farther than that 7 iron all other things equal? i enjoy your videos.

[@jbuburuz]

thank you. very interesting. love to see the course video with mark and graphite. I have always used graphite. 1. first set department store brand with graphite. used until I started losing club heads. 2. 2nd set bought new taylormade arrow burner with graphite. currently in my bag. love the clubs. I don't get crazy 170yard shots. I find my distance reasonable. I tried steel when I bought the arrow set but found it heavy. I am just use to graphite I guess. my favorite club is 4 iron. nice ball flight goes about 170+ yards.

[@garrymurphy1684]

James why do you think a single figure handicap shouldn’t use graphite shift got fitted few weeks back and these gave me good numbers but still unsure would be interested in your opinion

[@keithfinley2939]

These videos are excellent

[@TitleistGolf13]

What are your thoughts if the graphite would shatter? Looking to get a graphite shaft in a driving iron? I am a better player lower handicap just worried it would shatter over repeated strikes? Thats why I have always played steel! Thanks

[@michaeldoyle1141]

James, can you comment on the benefits of graphite for those with elbow or wrist tendon issues - v. steel??

[@jeremygiddings2551]

Had a fitting for Mizuno irons. In that fitting it was recommended that I should definitely NOT use graphite shafts. I don't have a problem with this but am curious as to why?

[@tommyh5540]

You did not ask your fitter?

[@jeremygiddings2551]

My first fitting, never thought about it. Been learning a lot watching Robinson, Fitch, and Shiels. Never even looked a spin rate, launch angle, etc. Pretty sure I picked the wrong shafts too. Can't hardly hold a green now.

[@colynmiles6206]

Hi I just don't understand that. I had Aerotech Steelfibre 95 shafts professionally fitted by Precision Golf to my Mizuno JPX 850 forged irons, best combination i have ever played, reduced handicap from 9 to 6 in a year

[@Geep1778]

I think you have to account for the difference overtime with graphite, especially if you’re used to steel shafts. I have 1 graphite hybrid and I actually like it a lot but to hit it well you need to hit the center of the face or It doesn’t perform well. Took me a min to figure that out but when you do flush it it’s like you don’t even feel it. It’s highly satisfying go buy some 😈

[@carsonasskeoni]

made the switch today ! hopefully graphite is what my game needs lol wish me luck

[@richardking4725]

Not sure that this was really a very fair test as Mark is clearly a player very used to steel and not at all used to Graphite. I thought it was interesting that his last couple of graphite shots were nonetheless really long and it would have been interesting to see if he had continued, whether that length would have been maintained , as he became more used to Graphite. For the record I have two sets of clubs, one of each shaft type, and I have yet to decide which I prefer. I only started lessons and playing this year

[@keithblumfield4540]

I can't understand the comment about it being too long when on a 150 yard par 3 and the club going 170. Why not use and 8 or 9 iron?

[@JamesRobinsonGolf]

What happens when your 120, 130 or 140? There’s no wedge for it so there’s a huge gap.

[@allanbishop7221]

I'm confused! I had Callaways with steel shafts then switched to Wilson D300's with graphite shafts, it's been almost 2 years but I'm not convinced I made the right choice.....and they were fitted!

[@SwingKingsGolf]

Big difference. I have always had graphite until my nike and callaway clubs which had steel. I played for a bit using steel and ultimately went back to my comfort zone with graphites on my taylormades. Whatever feels good to you stick with. My game with graphites is much more comfortable for my feel and has greatly improved my game. To each there own as they say!

[@stuh7049]

Did the shafts weight the same? Just as important or more than flex as there is no flex standard.

[@angelrueda2848]

Found some old titleist Graphite DCI’s $40. Can I use them to re-shaft some aeroburners? Would it be worth it? Not sure it it would be an upgrade or not

[@diesel11679]

I’m thinking a players iron head with heavier graphite shafts. Would be interested in seeing that comparison.

[@scootertrasher1369]

I'd like to see a senior with 80 mph driver speed compare iron shafts with a proper lie, look at how far the toe is up on that 7 iron at address 6:13

[@33awesomeman33]

Anybody tried mixing and matching graphite and steel to 'gap' certain distances, and limit the amount of clubs you carry? My beginner set of golf clubs came with all steel shafts, except for the 7 iron which they mistakenly threw in a graphite shaft. I use the 7-graphite if I need to ensure I clear a hazard, or if Im going for a longer iron shot. I rarely use my 6 iron and honestly can probably go without it because of this. If I have danger far I either hit a smooth or full 8 iron and I'm good. Thx 7-graphite, you made my 6 iron irrelevant :)

[@lonniehinson8888]

PLEASE DO MY TEST!!!!!! Cobra F9 irons versus Cobra F max irons. They both are made for people like me and mark. Let’s do it and let’s do it soon!! You have all the toys for testing. I can’t buy both sets. Please help me.

[@erickbauer8888]

I have a question, why are steel shafts not still available in woods?I much prefer steel in my woods but since about 2005 I have not been able to find one on store shelf.

[@justtowatch111]

My guess is that with the size of the heads going up they have been trying to minimize the weight of the shaft to keep overall weight down.

[@alangibson4499]

Is Mark's real name Eric Clapton? good video

[@Cookie.x.monsterr]

Getting fitted this week. I’ve been using graphite for a few months now and for some reason I like them more than steel. I’m 31 and normally have back issues. Plus I’m carrying my bag around. Rather than a trolley. I also like to think when I don’t hit the ball right the vibrations don’t go into my hands. So think I’m gonna stick with graphite. But will be testing both. I have a pretty fast swing speed. Lol that’s all I know. I don’t even have a handicap yet. But I’m all up for not going with the crowd

[@billybastar4022]

Some interesting points stated regarding hitting a 7 too far in relation to your current clubs distance. Apparently you must play driver, 7, P, and putter. 150 yard par three, you hit your current 7 iron, I guess with the i500 you would hit an 8 iron. The humanity, one less club, better trajectory, easier swing, straight as an arrow, criminal.

[@billybastar4022]

If I were you I would be so distraught I would quit the game and become a professional shagger😁

[@badshahsalman5574]

which shaft is best steel or graphite

[@brianh8801]

Many, if not the majority of top Seniors and LPGA players use graphite in their irons, so wouldn’t it make more sense for amateurs to seek the same benefits. I typically shoot around 78-82 and have played blades up until now. I turn 60 in January and have seen a steady decline in consistency. I’m switching to graphite, a little more forgiving irons 6-PW, and a couple of hybrids. Can’t help but where my game could’ve been if I made the move earlier.

[@JuanGarcia-hr1wf]

I used steel shaft on my G400 irons -more control, tighter dispersion

[@CW_GOLF_]

Remember that the 7 iron is really a 5.5 iron

[@JamesRobinsonGolf]

Absolutely is mate!

[@jeffreyprice2982]

What?

[@wayneatplay]

Would have thought Mark should have been hitting a regular shaft in both?