Steeline - Installing Roof gutters

[@littlejayy9947]

You guys have been extremely helpful for me I appreciate your quick and straight foward videos without the banter, cheers!

[@steveskrobot9496]

Very good, except 1 crucial point you forgot to demonstrate. *How to achieve the correct fall gutter position.

[@danielthompson3205]

Onlg issue i see here from experience with water, it was better to selastic around the internal edge of the gutter 'downpipe' hole or on the inside edge of the insert prior to inserting. Hence spreeding the selastic in a water tight fashion then rivit/screw in place - then smooth over for finished effect.

[@youhen01]

Next, install the guttering as cheaply as possible. Do your best and silicone the rest

[@michaellidster1389]

Hell no you didn't explain that well enough

[@alexandargermanoski512]

I 😊😅😅

[@MarcelHVAC]

Will leak 100%

[@MarcelHVAC]

@Jon Doe silicone is crap and will cause leaks eventually

[@littlejayy9947]

No it won’t. You prob know f All about roofing. If done correctly will last for 30 years plus.

[@MarcelHVAC]

@@littlejayy9947 no

[@danielthompson3205]

Go look at every new house. 100% you will find this is how it done. From manufacturer standard instructions. Indeed some selastic can hold in certain temps but that's because you used the wrong one. I would be using a exterior water proof selastic. Till 2014 I had no idea most modlings and trims on cars were held on but an automotive selastic. That stuff binds everything and is 100 percent water proof.

[@Letskeepthingsreal]

What an ugly job, all those exposed rivets, no wonder nothing lasts long.

[@johnbarber107]

Explain how you would put pop rivets into the gutter and fascias with out seeing each pop rivet.