Steering Wheel Removal and Replacement - BA to BF Ford Falcon

[@LoggKet]

You saved me $300 for replacing the combo light switch on my Territory , Thank you for the easy demo great job

[@railtrolley]

2:11 The white plastic item, with the gap in it, at the top right of the fuse box - to the left of the OBDII plug. That is a peg tool for removing the fuses. It just pulls out of the fusebox and fits over the fuse. Gets the fuse out without risking damaging the plastic top of the fuse - that a pair of pliers might. It can be missing from many cars. You're lucky you still have yours.

[@4Fellowes]

Good video, but throw ya thread locker in the bin for these instances 🤣🍻

[@SureshBopitiya]

Nice job. I am just about to change my steering wheel and was stuck on the airbag - great tip re. fuse. I don't have the tool to pull it out, but the young guys at the wreckers just pulled it out of the donor car. I'll see how I go without the tool. Thanks again.

[@scottneulist9495]

How did you go removing the steering wheel without a tool?

[@SureshBopitiya]

@@scottneulist9495 once I removed the airbag cables and the nut, I pulled the wheel, prising it loose till it came off. Wasn't too difficult!

[@lQuadXl]

If you're worried about hot steering wheel, you can get steering wheel sunshade covers cheap, same reflective material as for windscreen shade. I have two, one goes on my pod guages and second one underneath to cover colour ICC screen & headdeck so doesn't get damaged from sun&heat!

[@Frank-rh7sg]

Faark lads, I need your help. 2003 ford falcon xr6 BA . None of the controls on the steering wheel are working (horn, volume, set, mode etc). Ran a multimeter across all fuses and are fine. Could it be the steering wheel??

[@darrinparnes1679]

great vid bud just did mine today thanks to ur video . was abit worried about it before this

[@thedadgardener]

Great vid! Thank you!!

[@Elderofwaukeen]

Can you fit a BA/BF steering wheel to an AU. Does anyone know?

[@sarvarzjjatt9240]

how i can stop cranky noise while ster wheel turning

[@krudosound]

Hey the horn goes on as I plug the battery back on. Any tips? Thanks :)

[@Aussieg91]

Same for me I don’t know how to stop it

[@Aussieg91]

I broke the inidcator combo switch and was all done but the horn went off when I tried to connect up the negative terminal

[@xxxxgold6961]

Hey mate as soon as I turned the wheel it locked up and now I cant turn the key over wtf!?!??!!??!

[@xxxxgold6961]

Dont worry it's working now I dont know why or how but it is, sorry bout that haha

[@railtrolley]

This is too late for you now, but when the wheel is turned, and let go as the key is removed, it is jammed hard against the steering lock pin. The wheel naturally tries to turn back to the straight ahead position. That is why the key can't be turned. The solution is to turn the wheel a bit more in the same direction, so it is not resting hard against the lock. The key will then be released. Even if the wheel is a 'full lock' in one direction, there is usually enough 'give' on the bump stops to wiggle the wheel to free the key lock. Same thing happens if an auto trans is put into Park on a hill. The load from the hill jams the shifter lever. If really badly jammed, the solution is to rock the car a bit back and forth. Not easy on a hill, but it will release the load on the shifter, and let it move. To prevent this from happening, the hand brake is put on first, while the transmission is in neutral, then Park is selected. The load is on the handbrake. The handbrake will release regardless of a load on it or not.

[@scottneulist9495]

@@railtrolley Thanks for the information about the park brake. I find I always have that issue. Should you release the brake so the handbrake catches the load before putting it into park?

[@railtrolley]

@@scottneulist9495 Yes, that is the way to do it. Shift into Neutral, park brake on, let go of the main brake pedal, then shift into Park. Do it that way and you will never have a jammed gear shifter on a hill. BTW the park brake should only need a couple of clicks on, to hold the vehicle. Any more and the cable has stretched and needs adjusting. The park brake is cable operated and does stretch over time. The best way this is done is at the wheels. Many shops don't like doing park brake adjustments as it is a PITA of a job. The wheels have to come off, and the adjuster is reached through a tiny hole on the brake drum or disc. I adjust my own. I'm not sure how the new cars with automatic or electric park brakes work. Seems like another way to make something more complicated and likely to go wrong.

[@robertbawden1702]

@@railtrolley then you better vid your mechanical skills on this one @RAIL and stick it on youtube eh

[@iwillnotcomply2002]

Gday mate is the steering pully really necessary. I believe u can get the wheel off by prying it off? Without the need of a pully. Great video.

[@magyaradam]

What if the steering wheel is locked?

[@Griffsta_]

Great tutorial. How much was the new steering wheel?

[@acmelbourne]

It wasn't Brand New - Very Good Condition Second Cost on Ebay delivered From Queensland to Melbourne $125

[@brothersarmdanddangerousba475]

ADC Melb does any codes come up or airbag light

[@acmelbourne]

No not at all - during installation the battery is disconnected for a short period prior to starting work

[@alancooper7062]

I’ve done this job a few times, I normally find that if you leave the 50 torx screw in the last few threads and pull on the steering wheel rim from one side then the other, when it comes off the torx screw will stop it hitting you in your face !also if it’s that tight you need a puller don’t put centre screw from puller into threaded hole of steering column shaft or you risk ruining thread !

[@robertbawden1702]

@@alancooper7062 good advise AL.

[@Tripping590]

If I just needed a new airbag “what you first took of”. Could you please tell me what I’d look for on eBay “looks the same as you have in your car 🚗 thanks

[@scottneulist9495]

You probably dont want an eBay airbag, I imagine it would be liable to faults

[@natrowephoto9796]

How would I replace just the stereo and Cruise buttons on the wheel? Thanks

[@acmelbourne]

Never done one its easier just to replace the whole steering wheel.

[@dajkr8748]

Natalie Rowe you gotta remove the air bag exactly like he did, then just remove the stereo and cruise control button and install new ones. What i done was went to some wreckers and got clean button and ripped the old one off and gently put the new buttons in

[@random_ostrich]

Try and stop all the air coming through your nostrils while your talking. Sounds like your talking with your nose.

[@acmelbourne]

lmao that's what I sound like in real life

[@random_ostrich]

ADC Melb You got that distinctive "I could sell tiles"voice. Lol no malice intended bro. Thanks for posting the vid too. Helped out a heap with my xr8 ute