#DIY #weekendproject #birdhouses You can do this! A fun, easy project building birdhouses.
Пікірлер: 56
@FayeBel7 ай бұрын
I love watching people making bird houses just like this one.
@johnmckee79374 ай бұрын
Great video Wes! I am retired only starting in woodworking. This is more a how to use video which i love. Always Learning. I made my first birdhouse and am ready to try a more complicated one now.!
@badbob4 ай бұрын
Nice video. I have made dozens of bird houses and I was always taught to make sure there were vents.
@rickw6521 Жыл бұрын
No vent holes a death trap, a one time house no way to clean it out. But if you understand how to put vent holes in or don't do the 30 degree cut on the sides and you have ventilation. and 2 pins and a screw in the bottom so you can clean out!
@EMWoodworking4 ай бұрын
Can you post a video for that?
@rickw65214 ай бұрын
@@EMWoodworking If i knew how i would. But i don't know how.
@johnchurchill7863 жыл бұрын
This would make a great beginners project, really enjoyable video as always Wes,keep them coming!👌👌👌👍👍👍👍
@WoodworkingWithWes3 жыл бұрын
Thanks John...I love the birds and like to take care of them. Wes
@fartypants5696 Жыл бұрын
Great videos, my only comment is that in the second house made I would have a catch or lock to the hinged roof as squirrels will lift the roof and take the young or eggs.
@WoodworkingWithWes Жыл бұрын
Good point...thanks for the tip! Wes
@davidballard2424 Жыл бұрын
Are you building it for show or for a bird to live in? If it is for a bird to live in, omit the little perch on the front. Predator birds will sit on it and use it to help them peck inside the house. The smaller birds that will live in the house do not need the perch to access the house.
@TiCranium1988 Жыл бұрын
He also didn’t leave a way to clean it out.
@louislandi9385 ай бұрын
@@TiCranium1988 0:34
@louislandi9385 ай бұрын
@@TiCranium1988 Lack of a clean out door is the #1 problem with ‘bird house experts’. #2 is sticking a perch on it. #3 is having the wrong size hole for the type of bird the house is for. I am not an expert but I have done some research.
@biffoswilly Жыл бұрын
Only one problem - How do you easily clean it?
@funnyfunny1474 Жыл бұрын
Awesome thanks
@JoseGarcia-wj4ml3 жыл бұрын
Gracias x ese vídeo me gusta mucho 😊.
@WoodworkingWithWes3 жыл бұрын
So glad you liked the video Jose. Thank you for watching.
@dianebennett80956 ай бұрын
Good easy video to follow along with. Thank you for your time. Alf🙂🙂🙂
@WoodworkingWithWes5 ай бұрын
Glad it was helpful! Wes
@ProfessorDIY2 ай бұрын
I would skip the 30 angle so there is air movement
@ascott6804 Жыл бұрын
150yrs ago!! Birds were dinosaurs back then!! Lol!! Great ideas!! Thanks!!
@jeffkennedy56073 жыл бұрын
Thank you
@WoodworkingWithWes3 жыл бұрын
Thank you for your support !
@bijan47275 ай бұрын
Hi Wes. I tried to copy your first bird house and I run into a problem. How did you do the floor ? What should be the width before you do the 15 degree miter ? If I say the width of the floor is 51/2 inches and then do a 15 degree miter cut , the floor width will not match the width of the front and back. Second , I see your cuts are so perfect , do you mill your pieces before you start ? If you do , do you send them through jointer and thickness planer ? I would really appropriate your input.
@brumrunner15 Жыл бұрын
Hi Wes, Is there any reason for not gluing as well? Great presentation mate, thankyou. Bob.
@AndrewScarella10 ай бұрын
I am confused by the marks on the chop saw, how did you know where to make those? I think it would be easier if you said how far to measure from the edge and make a mark on the wood in order to get that 15 degree cut
@ODX171 Жыл бұрын
No Vent holes? No Drainage holes??
@ramiroramirez-sw4mi Жыл бұрын
How do you going to clean it
@ODX171 Жыл бұрын
@@ramiroramirez-sw4mi Did you watch the video ???????? 19:06
@Vinterfrid8 ай бұрын
@@ODX171 Did you watch it? The first house be built has no holes. Right?
@ODX1718 ай бұрын
@@Vinterfrid Both boxes he built do NOT have Vent / Drainage holes and should always be added
@richardmccann48158 ай бұрын
@@ramiroramirez-sw4miIf you can't figure that out, you shouldn't be building birdhouses.
@litahsr.82262 ай бұрын
2 things how are you gonna clean it since you nailed the whole thing 🤔? 2 the pegs are easy to sit on it till they kill its other than that looks nice just wish i had a table saw any tips to cut the degrees with a hand saw ? lol
@MrSkunky20093 ай бұрын
Brilliant insight yet the only thing is... You did explain the bottom panel Lol
@amarkataria37633 ай бұрын
Good shit
@stoneyj1a13 ай бұрын
I made one like your second model and the hinge kinda gets pinched when I try to open the door. Any ideas? Should i chisel out a spot for the hinge?
@WoodworkingWithWes3 ай бұрын
Hi...not sure, have you checked to see if your hinge is backwards? Thanks Wes
@paceva3 ай бұрын
What do you want a whole hvac system!? lol ❤
@philipmiller52023 ай бұрын
How do you clean out the bird houce?
@WoodworkingWithWes3 ай бұрын
Unfortunately I did not allow for cleaning on this bird house. I recently made a new video on bird houses that has a removable bottom for cleaning, you might want to check that out. Thanks Wes
@littleeddie133Ай бұрын
you should list the plans for download
@WoodworkingWithWes28 күн бұрын
Yes...you are right, that would make it easier for my viewers. Thanks, Wes
@WoodResinCustoms2 ай бұрын
Every woodworking with wes video I watch there's steps and details not filmed or its been edited out.
@damianluby89734 ай бұрын
He keeps referring to WE, is there someone helping him build this😉 Maybe it's not so simple DIY birdhouses after all if it requires more than one person 🤣
@ianlees14804 ай бұрын
Essential that bird boxes have vent/ drainage holes in the base. The entrance hole would benefit from a steel / metal protection rim to prevent predators from pecking out the wood. The inside of the front cover would benefit by glueing small twigs to make it easier for the fledglings to grip when egressing from the box.
@josephconsuegra6420 Жыл бұрын
You should never cross your arms/hands while using a miter saw. Look how close his hands are to the blade.
@jmj2679 ай бұрын
Another video that doesn't tell how thick the wood is
@tomanth49816 ай бұрын
WOW! Dangerous cuts with miter saw!
@bigdaddyfish2Ай бұрын
You are dangerous with your saw! YOU SHOULD NEVER CROSS ARMS while operating a miter saw. Your arm came in contact or dangerously close to the blade guard.
@jameswilliamson8050 Жыл бұрын
Why didn't you tell us about the size of the holes 😠
@isaacschoenberger3827 Жыл бұрын
Looks like a 1 inch hole, cry bout it
@TheGuyThatWondersWhy Жыл бұрын
He does! @18:25
@MrStanwillis Жыл бұрын
different birds different hole sizes?
@ODX171 Жыл бұрын
@@MrStanwillis Yes and very important to make the hole the right size and distance from bottom for the desired bird.
@Vinterfrid8 ай бұрын
@@ODX171 Exactly! In the first house the distance between the entrance hole and the bottom is too short - making it easier for predators to raid the nest.