Step-By-Step Water Pump Replacement on VW Passat, tiguan, CC, EOS 2.0 Turbo TSI/ CCTA 2008-2016

How to remove and install water pump step by step on VW/ Audi 2.0 TSI turbo:
Audi A3, A4, A5
VW Passat, Tiguan, CC, Eos
Watch this video to remove hidden bracket before removing intake manifold:
• VW TSI 2.0 L Intake Ma...
💰Save money on other VW / Audi repairs
❗️2.0 TSI Engine Serious Common Problems to Watch Out For on VW and Audi
• 2.0 TSI Engine Serious...
VW/ Audi 2.0 turbo 2008-2013 Timing Chain Tensioner Failure
• VW/ Audi TSI 2.0 turbo...
How to Replace Upgraded Timing Chain Tensioner on 2.0 TSI VW/Audi 2008-2014 engines
• How to Replace Upgrade...
Cranks But No Start? - VW Passat, Tiguan, GTI 2.0 turbo 2008-2013 - Check This First
• Cranks But No Start? -...
How To Diagnose & Fix a P2440 Code on VW / Audi 2.0 Turbo TSI 2008 & Up
• How To Diagnose & Fix ...
Timing Mark Alignment for Valve Train On 2.0 Turbo VW And Audi 2008-2015
• Timing Mark Alignment ...
Rear Main Seal Leak? Check This Easy Thing First - 2.0 turbo VW Passat, Tiguan, GTI 2008- 2014
• Rear Main Seal Leak? C...
Serpentine Belt Removal and install on VW Volkswagen 2.0 turbo engines 2008-215 - Simple & Fast
• Serpentine Belt Remova...
Complete Cylinder Head Removal & Install On Popular VW, Audi 2.0 T TSI Engine Gen 1,2,3 2008 & Up
• Complete Cylinder Head...
💰Save money on your car/truck maintenance and repairs:
Don’t Get Stranded With a Dead Battery in Winter - Do 3 Top Battery Checks Now!
• Don’t Get Stranded Wit...
Top 3 Reasons Why Your Car Won’t Start
• Top 3 Reasons Why Your...
Don't let Timing Belt Failure Happen
• Don't let Timing Belt ...
Top 6 Gas Saving Tips
• Top 6 Gas Saving Tips ...
Look what happens when you neglect your engine oil
• Check and Change Your ...
Gas Pedal Sticks? Car Jerks? - Easy DIY To Make It Smooth & Safe
• Gas Pedal Sticks? Car ...
What Does An Exhaust Leak Sound Like? - And How To Find It
• What Does An Exhaust L...
Check your Engine, Coolant, Transmission, Power Steering Fluid, and Brake Fluids
• Check Your Car Fluid L...
Blown Head Gasket - Don’t Neglect Your Cooling System- Look What Happens
• Blown Head Gasket - Do...
What Does Engine/ Serpentine Noise Sound Like And What Does It Mean? - Squeaking & Squealing Noise
• Serpentine Belt Squeak...
Always make sure your lug nuts are TORQUED and not done with an impact gun
• Don't Use This When Ch...
How to diagnose and replace wheel bearing going bad on any car
• Whining, Grinding Nois...
Learn why the tire pressure is important and how to check it in your car
/ bm8wnjripj
Remove and replace Broken or Stripped Wheel Stud on most cars
• Broken or Stripped Whe...
Cheap Way To Check For Bent Valves Without Removing Cylinder Head
• Cheap Way To Check For...
Fast and Easy Way to Restore Faded Car Paint and Scratches - With Minimal Tools
• Fast and Easy Way to R...
The Best Way To Fix & Repair Broken Wire in Your Car - Soldering Car Wires Together
• The Best Way To Fix & ...
Car Air Conditioning AC Not Working? - Diagnose And Maintain It At Home
• Car Air Conditioning A...
Replace Windshield Wiper Blades in 1 Minute
• How To Replace Windshi...
⁉️QUESTIONS
If you have any questions or I missed something, comment below and I’ll answer and try to help you out
If you find this video helpful, like it and subscribe to my new channel. I’ll have tons of videos on all kinds of car and truck repairs in the future.
⚠️Disclaimer:
The videos on Motorcarnut channel are posted with informational purpose only.
Information posted in this video does not guarantee any particular result. Use this information provided in the video with caution and at your own risk. It is the responsibility of the viewer to take this risk.
Motorcarnut is not responsible or liable for property damage, any loss damage, or injury related to or resulted from information posted in this video.

[@joeobrien3541]

I own a Porsche shop and do some VWs. This video is the most comprehensive and clear 2.0t water pump replacement instruction on planet earth.

[@motorcarnut]

Thank you! Much appreciated, especially from a fellow shop owner.!!!

[@efuture07]

I agree!

[@pinkpapafranku]

This video saved my ass!!! I have a 2014 CC and i learned the hard way that an oil leak will cause the seal to expand and crack the plastic. I was able to get a new water pump in there so i can get to work and next week i can deal with the valve cover. This is one of the best tutorial videos I've seen and I'll 100% be checking back when i have other work to do. Thank you for making this!!!!

[@motorcarnut]

No problem, thanks for the feedback! much appreciated.

[@Khercules]

Incredible video. I'm trying to help out a buddy who's in a tough place. He has a 2006 Passat 2.0t. Fsi engine. How much different could it be? I'm pretty mechanically inclined, just wondering if this video would help me out enough to where I can figure out the rest. Thank you!!

[@motorcarnut]

Thank you! They are pretty different engine and this video wouldn’t help you much. The FSI engine has a timing belt not chain like the TSI engine also the water pump is completely different as it is driven by the timing belt. If you have access to a library online you can look up the procedure for free. I haven’t had one of those for a long time and believe you need a cam tool as well so might be better to change timing belt with water pump.

[@rowdydude957]

I replaced the water pump with an aluminum one and leaks from hose connectors and temp sensor started to develop, my assumptions is that aluminum swells and contracts with heat and cold that crushes o-rings and deforms the plastic connectors. Finally decided the best fix is to replace the aluminum one with a plastic one after replacing both upper and lower hoses and developing leaks again.

[@motorcarnut]

I never had problems with the aluminum ones, but keep me updated on the new plastic water pump.

[@mr.mr400]

Did you have to put the plastic spacers on the fuel injectors ?and are the metal rings with the hooks on the injectors clipped onto the metal flange on the fuel rail holding it in place?

[@motorcarnut]

Yes you have to put back the plastic spacers and no the metal clip does not clip on to anything.

[@erenoglu]

thanks for video In my case we are going to replace the chain set the pump is still fine. Is it wise to replace the entire pump with housing or just the pump itself? An is an INA pump (130€) a good choice of should pay 50€ more for an Hepu?

[@motorcarnut]

The water pump is one whole unit, I’d replace it so you wouldn’t need to worry about it anymore.

[@erenoglu]

@@motorcarnut Thank you for answer will do it

[@motorcarnut]

@erenoglu no problem

[@GOAT86STUDIO]

NICE JOB!

[@motorcarnut]

Thank you! Cheers!

[@PsyNNanx]

I’m a mechanic apprentice and when this job came in I freaked the fuck out, this video saved my life

[@motorcarnut]

Lol, no problem I got your back!

[@PsyNNanx]

One question one’s everything is back together do you have to bleed fuel system or will it just start

[@motorcarnut]

Just turn the key to the on position ( not starting) on and off 3 times to prime the rail then start it up.

[@gloglogo2638]

More folk need to watch a video because they are having a time with my car right now. My stress level is through the roof. If the dealer can't get a screw out - how will they put it all back together?

[@saulsanchez9856]

Thank you for the great video, but torque is not 90 lbs.

[@motorcarnut]

Yes, sorry it’s 90 in lbs

[@jaimesanchez6305]

@@motorcarnutit’s definitely not 90 lbs either. It’s actually 15 NM go to 90 and they will snap off.

[@motorcarnut]

@jaimesanchez6305 As I stated months ago to another viewer, it’s 90 in.lbs Not ft lbs

[@jaimesanchez6305]

Can you provide your source? Just want to make sure it’s right.

[@donavangragg6018]

Anyone get a p2568 code before having to replace water pump? I had no cel but wanted to check if there were any codes after battery seemed dead and got the code.

[@motorcarnut]

The radiator on some California cars have an Direct Ozone Reduction Sensor refers to a sensor glued to the radiator core, not the coolant temperature sensor, can be disconnected or bad, Also make sure you have no exhaust leaks as well.

[@mechanicheadautomotive-qq6sk]

how many hours do you say this job is 5-6 hours?

[@motorcarnut]

That’s about right, yes.

[@Grimz0327]

Thank you for sharing I have a 2016 VW Tiguan the dealership wanted to charge me $2,850. Did it myself with your video to follow , you’re the man 💪🏾

[@motorcarnut]

Now that’s what my channel is all about! Thank you for the feedback! Much appreciated!

[@Grimz0327]

Yessir thank you again I’ve subscribed to your channel and shared your video with a few friends who have VW’s pertaining to the year of the vehicles you instructed this video is great for. Happy holidays and Happy New Year to you my friend 🤙🏾

[@motorcarnut]

And you as well!!!!

[@anthonybalducci1688]

This video is fantastic! I had to replace the water pump on my 2012 EOS, this helped tremendously. I would add for everyone, while you have the intake manifold apart, clean everything before reassembling. It was mentioned in the video, but want to emphasize that. Thank you!

[@motorcarnut]

You're welcome! Thank you for the comment, really appreciate it!

[@jackc244]

its easier to put the injectors in the head first, then put the manifold on. the injector seals should all be replaced also but some people have had success without changing them. Nice job either way

[@motorcarnut]

Whichever way gets it done and saves money, and thanks for the feedback!

[@izmaruchanzi6560]

Thank you for taking the time to show us a super clear break down of the process. Gives you the best description of the how to do it!! First time working on a VW after this video I’m sure will get the job done!! If a 3 year old watch this video he will definitely learn how to take the water pump off that’s how great he explains everything! Great video

[@motorcarnut]

Thank you for the kind words! Really appreciated! Also, in the video description there is another video on the hidden bracket that must be removed to get the intake manifold off. When I made the video that particular vehicle didn’t have one a forgot to mention it, just a heads up! Good luck if you get stuck give me a holler.

[@3366100]

Hi, thanks for the video can you please let me know the part # on Amazon if you can thanks

[@motorcarnut]

No problem! Appreciated! www.amazon.com/Aluminum-Water-Tiguan-Jetta-Beetle/dp/B07WQGG5PC/ref=asc_df_B07WQGG5PC/?tag=hyprod-20&linkCode=df0&hvadid=697456193483&hvpos=&hvnetw=g&hvrand=4772202874905904387&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=1026032&hvtargid=pla-815245761019&psc=1&mcid=5c19d47b3069357c9e5bdb50b51ed3ff

[@thebigbosss1000]

Hey buddy so I did my water pump on my 2012 VW CC Sport after everything was done I had a engine light came on i reset it but it came back on run a test and now it’s saying some gaskets on manifold are leaking

[@motorcarnut]

Make sure the intake manifold is completely seated. Sometimes the fuel injectors if not positioned correctly will cause the manifold not to seat all the way

[@thebigbosss1000]

@@motorcarnut it did set right but some reason I got codes P2008 Intake Manifold Runner Control (IMRC) Circuit Open (Bank 1)

[@JesseOsuna]

Is there a link for the water pump?

[@motorcarnut]

Yes: www.amazon.com/Assembly-Replacement-Tiguan-Beetle-06H121026AB/dp/B08FHR18JZ/ref=asc_df_B08FHR18JZ/?tag=hyprod-20&linkCode=df0&hvadid=693439390246&hvpos=&hvnetw=g&hvrand=11806014129894929604&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9004531&hvtargid=pla-966360424526&psc=1&mcid=6362a649f97a3303a1daab57aa99b17e

[@JW-wq1jj]

Hey! Great video. I’m stuck trying to get the manifold out, I got all the torx and 10mm nuts off- I might have missed if you mentioned in the video if there’s a support bracket underneath the manifold. Something is keeping the thing stuck - it’s 1/2” out already but won’t budge. Help anyone! Thanks!

[@motorcarnut]

Yes I even made another video about that bracket

[@JW-wq1jj]

@@motorcarnutright on! Now I’m struggling to find replacement bolts for the water pump- it was previously replaced apparently and they stripped the bolts I had to chisel a couple out. Going to call VW tomorrow

[@motorcarnut]

@JW-wq1jj or just match them up with some from a hardware store like Home Depot

[@catrao9]

Great video with lots of details! Thank you! Is there an easy way to replace just the thermostat without having to take the intake off? My water pump is pretty new but the thermostat is stuck open. 2012 VW CC. Thanks again!

[@motorcarnut]

It’s in a tight area and has to be done under the vehicle but it can be done

[@MarkBierley]

Forgot to mention the bracket under intake on 2013 cc that is a BEAR to get loose, guessing it was left off this car

[@motorcarnut]

Yes, this car didn’t have it

[@HellenicVanagonTheSyncroHeresy]

Very comprehensive video! Congratulations! As an owner of the grandfather of the TSI engine , having a g60 motor into a Passat Syncro, ( 325.000 km.), unopened for repair, make some unavoidable comparisons. At that era, (1990), users complaining that the g60 engine was very complicated and fragile. The real life saw that it was, simply, so much ahead for the era, (of the 90's), but for nowadays, too. With an ABT kit, (@ 200 hp), works for 32 years without a glitch, having so much better qualities, (every part is made of aluminum and the notorious supercharger of the exotic magnesium). (Of course, the car was and is for every day use and not for races). I service her in person, without being a mechanic, and tomorrow I am going to change, by my self, for the first time in 325.000 km., the water pump which is, in comparison to the TSI's pump, a miracle of technology in its simplicity, quality and durability. Not to forget that the g60 supercharger, supposed, at that era, to be a grenade , works perfectly, (the 3rd generation), and is proved to be more durable than the TSI's turbos and superchargers, without problems , having a M.T.F. of ~200.000 km.. As for the timing chain of the TSI, you know... The g60 has a timing belt working silently, (no diesel sound but rather a turbine), and, just in the case you forget to change it, the g60, as a non interference engine, remains without any damage! (It happened to me once). Please, if you think this post is irrelevant, delete it. Thank you for your time. The Syncro Heresy

[@motorcarnut]

I enjoyed reading this. Engines are not like they used to be that’s for sure. Been saying that for many years. Thanks for the post. Appreciated!

[@davids2542]

Thanks for this video. My Saturday is gone, but I still have $1000 in my pocket. For some reason my kit was missing those 2 big o-rings for pump/hose connection. Ran to 4 stores with no luck. The old ones looked really good though, so hopefully no leak in a future. Thanks again for taking time and making this video

[@motorcarnut]

Great! Glad to hear its fixed. I know the local auto parts or dealers never have what you. But you are probably fine if it's not leaking when you put it back together it won't leak.

[@hardbodychevy]

Have you had any problems with the bair aluminum housing?? For some reason i keep melting the gasket between the block and housing😢 just picked up another aluminum one that came powder coated gonna try it now 🤞 it helps. If not the next gasket i put in going in Permatexed like a mf😂😂😂

[@motorcarnut]

It shouldn’t melt, hopefully your can is not overheating or running too hot?

[@andrublaueair6752]

NICE JOB bro! Looks coolant need change! The coolant bad color..! All so.. gasket on this pump is not oil resistant!!! Oil some times drops on the gaskets from intake!🎉🎉🎉

[@motorcarnut]

Thank you! Yep got to be clean and always change coolant especially when doing this job.

[@kensinn2937]

Amazingly thorough! Was planning to take the Tiguan to the dealer to replace the water pump but your video was so detailed, I did it myself. Many Many Thanks!

[@motorcarnut]

Glad it was helpful! Thank you for the comment as well!

[@AbrahamRomney]

Thank you! I was following another video and got the intake manifold removed and was almaot ready to give up because I coiikdnt follow what they were doing when removing the pump. You made it perfectly clear. Much appreciated.

[@motorcarnut]

Great to hear! Thank you very much for the comment!

[@arnoldrhuback2746]

To motorcarnut, i have a 2012 vw eos with currently 72000 miles on it, i know that somewhere down the road i am going to need a thermostst or waterpump or something down in that area and this video that i just saw that you made was incredible to watch, i have already had to replace the temperature sensor in the waterpump housing due to failure and after knowing what i had to go through for that and knowing that some day i will have to replace the waterpump, watching this very through video i will be able to tackle it, but you did an incredible job creating this video along with explaining everything, while taking all this stuff apart now is the time to replace the waterpump, the thermostat, the tempetature sensor and any "o" rings and gaskets while its apart at the time for whatever you are already doing, for the few extra bucks for parts, now is the time to do it to save yourself tear down time in the future, again thanks for the great video.

[@motorcarnut]

Sure, thank you as well really appreciate the comment and feedback and good luck!

[@thebigbosss1000]

I own a 2012 Volkswagen CC 2.0 Sport and I have coolant leak took it to the shop and they said it was the water pump they quoted me $1000 to replace the water pump is that how much and water pump cost ? I can’t seemed to find a good part store for me to buy the water pump by now watching this video I should be able to do it myself

[@motorcarnut]

Go for it! You get stuck give me a holler. Get an aluminium one on Amazon for like $50.00

[@thebigbosss1000]

@@motorcarnut yes ima give it a go

[@motorcarnut]

@thebigbosss1000 take your time and I have another video about a hidden bracket you have to take off too just so you know. I left it out of this video

[@thebigbosss1000]

@@motorcarnut yes thank you I’ll check that out 👍🏽

[@motorcarnut]

@thebigbosss1000 no problem

[@Bobman84]

Just did this job, without having to take the intake manifold off. This video was very helpful, however and it's a great tutorial. I was able to save time and not disturb the fuel system, by taking the air box out, along with the throttle body, intake manifold bracket and turbo intercooler pipe rubber. My water pump had plastic break off at the seal and the gasket itself had bowed.

[@motorcarnut]

Awesome! Yes I have done them with taking off the manifold as well, but for me it’s way easier. And the the inexperienced first timers it’s go to “see” what you’re taking off, lol. Good job though!

[@Bobman84]

@@motorcarnut Yep, it's still worth taking off the manifold to clean and have even more space to work with!

[@paulshinn805]

I did the same, still stuck getting that belt on before the union...

[@sharpiemarkeramanda]

Nice, I have watched all the videos that replace-remove the intake manifold and this is honestly my favorite- I gained more info from you than the professional guy! My 2012 beetle turbo water pump is now replaced!

[@motorcarnut]

That’s what I like to hear! Done by yourself and done right! Awesome and thanks for the feedback!

[@MysteryScienceGaming]

yep, I've watched 20+ on youtube so far. Not joking. This is the best one by far. I'm about to start and first thing I'm doing is setting laptop up next to car before I get going lol

[@motorcarnut]

Thank you! Really feels good knowing I’m helping others. Good luck and take your time, you’ll do it like the others.

[@Andrew-ne1yw]

Nice video, I just watched it 3 times and ordered the parts. Should I replace the fuel injectors and how can I do a carbon cleaning since I'm already taking everything apart? I just subscribed and liked! Lastly, I will be doing brakes (pads and rotors) all the way around on my TSI 2.0L I'LL TIP ONCE I COMPLETE it! THANK YOU!!!

[@motorcarnut]

Thank you for the sub and comment, much appreciated! If the fuel injectors were fine before I wouldn’t change them, they rarely go bad, as for the carbon cleaning, I always take the head off. There are a couple of ways to do it but not really that effective. Walnut blasting is the best way but requires special equipment. You could try to clean it with some carb cleaner and a pick but some carbon will fall into the cylinders so be careful. These engine do build up a lot of carbon however.

[@RadioKilla180]

I used this guide to install my waterpump on my 2009 GTI with a TSI motor. Thank you! 🎉

[@motorcarnut]

Awesome! That's what I like to hear! Thanks for the feedback.

[@cosmecastro5913]

Perfect step by step from beginning to end instructions brother cant miss anything thanks

[@motorcarnut]

No problem 👍 appreciate the feedback!

[@qcbtbx]

Excellent video! How difficult is it to change that belt while in there?

[@motorcarnut]

Thanks! Easy when replacing pump

[@JeminoWayde]

Great video! Just wanted to point out that there's a bracket supporting the intake manifold to the engine block. Keep up the fantastic work, and thanks for sharing your expertise!

[@motorcarnut]

Thanks for the info! And really appreciate the feedback. Yes, there is one and a-lot of time they are missing because most people don't put them back but should.

[@lokyblack3379]

this desing is the most stupid water pump i ever saw in all my life as a mechanic, i dont know how people love this cars......... but for mi is good 🤑🤑🤑🤑🤑

[@motorcarnut]

They are definitely better designs, I agree

[@frankdelacruz2919]

My friend, you’re the best I have seen!!! I believe that you should be a teacher, or an instructor, or a guide, or anything for others to learn because you’re excellent on showing people what to do. You made this task a lot easier for me to work on the water pump of my Tiguan. I have saved a lot of money and time! Thank you very much.

[@motorcarnut]

Thank you so much for the sincere feedback! people like you make this all worth while! Take care!

[@freddiebaez9751]

great video and tutorial. I don't know the anatomy of these vehicles at all so i paid a euro guy to swap a motor and within a week I'm noticing coolant getting low. sure enough it's from the area near the water pump and he's not wanting to repair. using your process I got it well until the point was yanking it out. got separation for about 2 inches then its stuck solid. Won't come out or back in. Like I'm missing a bolt or something in the middle. I removed the throttle body hose because it felt like the hang up might be there. is there a possible bracket or something different added to a 2011 CC? Either way than you so much for the process! It would have taken me 3 times as long to get to this point. My next step is to start removing throttle body and brackets just to be able to see better.

[@motorcarnut]

YES! kzbin.info/www/bejne/pprLc6COn7ebars. Should of been in the description!

[@freddiebaez9751]

Well yep. that did it! thank you!

[@motorcarnut]

@freddiebaez9751 Hey great! And thanks for the update!

[@bm_wuratli6883]

its fit on gti 7 clubsport too?

[@motorcarnut]

Nice engine! Yes pretty similar

[@bm_wuratli6883]

@@motorcarnut thx*

[@motorcarnut]

@bm_wuratli6883 no problem

[@ivanvega2821]

Hey brother, I have always been wanting to ask but I always forget. As far as the injectors when pulling the intake off. Is it really required to reseal the injectors if they don’t stay in the cylinder head?

[@motorcarnut]

No, they rarely go bad unless they are obviously damaged

[@ivanvega2821]

@@motorcarnut You should make a video on how common Tiguans leak threw their sunroofs!

[@motorcarnut]

@ivanvega2821 Yes, I will. The drain lines pull away and create leaks. Thanks!

[@PabloGonzalez-oq8xf]

Great video, reminds me of my time in Boston and NY, keep it up you have a subscriber for life

[@motorcarnut]

Thank you very much! I appreciate you taking the time to comment!

[@thebigbosss1000]

I’m a new subscriber by the way 👏🏽

[@motorcarnut]

Thanks for the sub!!!

[@stephanpieterse6960]

I am planning to buy the 2013 VW TSI 1.4L HL Golf MK7 - Was wondering if this water pump is exactly the same for that model. Also could you please share where you got the after market water pump from please. Looks like a good durable option.

[@motorcarnut]

No that engine is different.

[@mca9036]

I want to change de oil cooler too because the oil it goes 10º/15º degrees hotter than it should be i think it might be de oil cooler . I suppose that if i follow the steps of the video to the 19:00 min , its simple unscrew the oil cooler and put the new one right? Awesome video!

[@motorcarnut]

Yes! And thank you for the comment!

[@Docprice]

My water pump just went today, I’ll be doing this because of this video! Is there any special procedure you have to do when adding fluid? Do you recommend flushing the system first? I’m also thinking of changing all the hoses out as well while I’m doing this too. Great video!

[@motorcarnut]

Thank you very much!, Yes, some vehicles have an aluminum brace that goes from under throttle body to engine block that is not in the video because some don't have one and yours may. 13MM nut to throttle body and triple square bolt to block. I would flush heater core, I have a video on that as well because have many vehicles that had low heat output and recommended. No special procedure for filling coolant system. You get stuck give me a holler. Good luck!

[@mca9036]

This video is incredible explained! On mine 2011 Vw Golf GTI Mk6 CCZB is exact the same i guess?

[@motorcarnut]

Thank you! And yes very similar

[@mwm13]

Awesome video, I’m using it to replace the pump on my 2017. I’ve followed all steps but something seems to be holding the manifold in. I can get it about 1-2” away from the engine but it won’t come up I’ll have to watch a few more times!

[@motorcarnut]

There is a metal support brace that goes from the bottom of the throttle body to the engine block that some vehicles have and some don’t. I forgot to mention that. Sorry

[@Alberto1B]

Great step by step. This is my next project. I will also replace the gaskets on the oil cooler, and oil filter housing that are leaking.

[@motorcarnut]

Thank you ! Good luck!

[@mr.mr400]

Another question at 26:50 does the plastic line plug into the front of the solenoid sensor?

[@motorcarnut]

There are many which one? Where is it coming from?

[@mr.mr400]

@@motorcarnut the straight long plastic line coming from the back by the intake solenoid with the piece of hose at the end but the one that comes in the intake

[@motorcarnut]

@mr.mr400 Intake runner flap solenoid to the back on the vacuum pump

[@TheDeathCards]

GREAT VIDEO. PUTTING THE BELT BACK ON THE NEW ONE WAS A PAIN. VERY HELPFULL VIDEO

[@motorcarnut]

Thank you very much!

[@vicmama55]

How did you get it done? The belt, I am having a hard time right now 🥹

[@motorcarnut]

The belt has to go on with the pump at the same time.

[@costinpetculescu3569]

I have a oil leak coming water pump area is probably from oil cooler . I will replace water pump as is leaking but not knowing how to fix oil leak.Thank you very much for your videos!😊

[@motorcarnut]

Thank you! When you take off the water pump you’ll have a better idea where it’s coming from. The oil cooler has a seal from the block but rarely ever leak, make sure it’s not the valve cover

[@adamxu778]

Nice Video！ What about the bracket under the manifold? Do you need to take it out first before taking the manifold? If yes, by hand or using tool？

[@motorcarnut]

Good question! Yes it has to come off first. The nut that goes to the underside of the throttle body is a 13 mm and the one to the block is a triple square but not sure of the size.

[@bigercat]

I cant seem to get my manifold to come out but im not sure what bracket you guys are talking about

[@motorcarnut]

It’s aluminum about 6 inches and connects from the bottom of the throttle body to the block. If for some reason your car doesn’t have it ( missing) the manifold needs some pressure to pull it out because the fuel injectors are pressed in a little

[@bigercat]

@@motorcarnut i found it thank you!

[@motorcarnut]

Great, no problem

[@angelsenareyes]

I’ve seen water pumps on eBay for $50 but I’m kinda sketched to buy one since everywhere els they are 200-300 are they really worth buying ?

[@motorcarnut]

Yes, get the aluminium one. Name brand markup is unbelievable most times.

[@MrVitorpatriota]

What about the 2.0l turbo inline4 with black engine cover? I have whats supposed to be a Jetta GLI (2013, 211hp). Is it gen 2 EA888?

[@motorcarnut]

No, EA888 is the 1.8

[@man-ix8dc]

Hope this finds someone that may have been in the same predicament as me. I worked on a 2012 CC and it has an aluminum bottom bracket that goes from the bottom of the manifold down to the block. You have to remove a nut on the manifold and a bolt on the block (M10 I think). Other than that great video!

[@motorcarnut]

Thanks for the comment. I did mention that support brace, however that vehicle’s one was missing. Usually mechanics don’t put them back for some reason.

[@MidwestRCcrawler]

Two of my injectors staid in the motor. I don’t think that’s right because all 4 of yours came out with the intake manifold. How do I get them out

[@motorcarnut]

You can easily pry them out but be careful not to break them.

[@MidwestRCcrawler]

I got them out. Wasn’t as bad as I thought. Thank you.

[@motorcarnut]

@MidwestRCcrawler no problem

[@JPDC1991]

Hello, Super well explained this intervention, can you tell me if the 2016 models already have the metal water pump?

[@motorcarnut]

Thank you for the comment! I don’t believe then went to aluminium from the factory, these are aftermarket.

[@supernova719]

This is a great video! I need to show this to the mechanic that wouldn’t do the job because the water pump was timing chain driven according to him

[@motorcarnut]

Thank you! Nope it’s not.

[@chadgreen4853]

GREAT VIDEO ! Thank you for taking the time to explain in such great detail, I thought it was going to be harder. Yes …you did save me a lot of money.

[@motorcarnut]

Awesome bro!, really appreciate the feedback!

[@earlrawles6265]

​@@motorcarnut where are you located so I can bring my car too you? Lol seriously ugh

[@kstucohkstucoh9842]

This is a high quality video. Best intake manifold and water pump DIY video. Thank you for making this!

[@motorcarnut]

Thank you! Really appreciate the feedback!

[@davidkonold5132]

Think you could have mentioned the aluminum bracket connected to the bottom of the manifold!?

[@motorcarnut]

You’re correct. I do so many of these with them missing because for whatever reason they don’t put them back and I forgot to mention it. I will make a note of it in the video. Thanks for the feedback, appreciated

[@sline3660]

Thanks Boss 👍🏻🙋🏻‍♂️

[@motorcarnut]

No problem 👍

[@everardosandoval7120]

Would it be possible to remove the oil filter without having to drain all the oil or will there be a mess with oil in my engine bay?

[@motorcarnut]

Yes, some will spill either way because the filter is right side up, but no need to drain it

[@natinico4226]

I need to know where the knock sensor is in all of this 🥲 is it visible in this video? Thanks in advance

[@motorcarnut]

18.58 in the video just below the hole with the orange coolant you'll see a triple square both with a electrical wire, that's the knock sensor

[@Sar0]

16:32 mechanic charging for a replacement without doing it. You do detail work. Keep it up

[@motorcarnut]

Yep, I bet they did charge for a new one especially if you can’t see it when everything is installed. I get a lot of other shops mess up’s.

[@brianmooney7009]

Today i changed the water pump. The only issue i had was a bracket under manifold. Your video did not show it. I was like wtf. Why wont it come off. I pulled a few times said something isnt write. Got it off. Was 1 10 mm nuts and another torque. I have a 2012 volkswagon cc 2.0 tsi. Just a heads up for anyone that has the same. Took me a lil while to figure out. Thank you great video besides that

[@motorcarnut]

Thank you and correct! I do so many of these and almost all of them are not there or newer ones don’t have it at all from the factory.

[@brianmooney7009]

Yea it was driving me crazy. I watched your video 5 times. Best video out there btw. Thanks

[@motorcarnut]

Thank you! I really appreciate that!

[@jrburkhead4188]

And the belt .

[@motorcarnut]

Yes, belt goes right on with water pump in one step.

[@Tunns]

Once completed do you just refill the coolant mix through the overflow tank?

[@motorcarnut]

Yes you do. After that you want to level when hot at the full mark.

[@skillz1855]

Is that JB weld/glue on the pump to cooler hose /oring coupler

[@motorcarnut]

Yep, someone must of tried to repair it like that.

[@Sar0]

Waited for you to say hooowww uuu doooin. But left disappointed. 😊

[@motorcarnut]

Ha ha

[@Sncedayone]

Now put it all together without dropping a bolt into the unknown absss

[@motorcarnut]

Take your time, is the key.

[@MysteryScienceGaming]

Thanks!

[@motorcarnut]

.

[@lar4305]

I despise Volkswagen's to work on lol, they are such garbage

[@motorcarnut]

All vehicles break down

[@J6yBlade]

Will this thermostat housing work on the later e888 tsi engines as I'm looking to do my mk7 gti

[@motorcarnut]

Not sure, just buy one for your specific year and model.

[@nesamina123]

Great video, should i put new manifold gasket and injector seals? Or its fine to reuse ?? Thank you

[@motorcarnut]

Replace them yes

[@nesamina123]

Does the aluminum pump come with a new temp sensor or do u reuse the old one ? Thanks!

[@eriknobles3946]

I can see that being at least $1200/$1500 job easy

[@motorcarnut]

Yes it can, but following my videos if you’re handy can save most of the money.

[@jrico122887]

Did u have to replace the gaskets in the injectors?

[@motorcarnut]

Not if they weren’t leaking, I do but if you don’t want to then it’s fine

[@riamo5]

Can anyone tell me how much the cost for this replacement ?

[@motorcarnut]

$400 to $800 depending on where it’s done

[@AreaCode862]

Amazing video! What’s the name of the pipe at 16:01?

[@motorcarnut]

I believe you’re talking about the coolant union from cooler to water pump

[@danielorneas-y1n]

PLEASE TELL ME HOW DO YOU REPLACE WATER PUMP DRIVE BELT

[@motorcarnut]

Same as in water pump replacement. The belt goes on when installing water pump

[@aldenphilbrook5692]

This would be so much better if you showed all the work

[@motorcarnut]

I pretty much did. I really don't show me turning nuts and screws or play music. That's really not needed and many people appreciate that. But if you have a question, unlike other channels, I answer all my questions

[@JuanCortes-ce2nt]

this is one of the best videos Ive ever seen. and im not just talking about VW videos.

[@motorcarnut]

Thank you! Really appreciate the comment!

[@medplusify]

So detailed. Very much appreciated. Great video

[@motorcarnut]

Thank you very much for the feedback!

[@jeremiahorr974]

What is they grey box next that hooks into thermostat housing

[@motorcarnut]

I think your talking about the oil cooler

[@arlyle8393]

Hello thank you for this Amazing video , Im having a hard time to find the o rings for the hoses?!?! Is there any part number ?

[@motorcarnut]

I think they come with the hoses but you can bring the old one to the auto parts store and I’m sure they can match one up for you. I have a whole set that I use so they should have what you need.

[@jalenbrown949]

More than likely they are on the new water pump !!

[@motorcarnut]

@jalenbrown949 That question is 8 months old, I’m sure they figured it out already.

[@تيمورعبدالعزيرحميد]

Very good 👍 👏 👌 change water pump good luck

[@motorcarnut]

Ok thank you!

[@m209l]

Where’s the link to get this stuff on Amazon?

[@motorcarnut]

Aluminum Water Pump With Belt Compatible with for Audi A3 A4 TT For VW Tiguan Jetta Golf GTI Eos Beetle CC 2.0T TSI a.co/d/cK3rxzz

[@ivanvega2821]

Hey friends! It’s me again with another question 😂 So I have a 2012 Volkswagen CC currently that has a weird issue. So I have no heat in the car and it’s overheating to 110C at idle with ambient temperature of 32F. It seems to just overheat to 111C (checked coolant temp with OBDeleven scanner) but it doesn’t pass from there it seems. The precious owner of the vehicle thought it could of been a head gasket issue and added gasket leak repair additive to the coolant. Which the coolant looks like it had orange sparkling flakes inside. I flushed the coolant with distilled water as much as possible but I still believe there is still nasty old coolant with that additive around the heater core. Should my next steps be to flush the heater core and maybe get a water pump/thermostat?

[@motorcarnut]

I would back flush the heater core and the radiator first and replace expansion tank cap. And report back with results

[@ivanvega2821]

@@motorcarnut well brother… the issue was the coolant cap. I replaced it because el noticed it was just to loose when it should be tight. Now the car doesn’t overheat and the heat is warm but not where it should be. I will be flushing the heater core on the CTAA. Any recommendations on how the flush the coolant system properly? Any additives you recommend…. Should the car be at warm temp. As always…… you are the best brother!!!!!!!

[@motorcarnut]

Great bro! Thank you! Really appreciate it! Car should be cold not to burn yourself. Take the 2 heater core hoses off the engine not the firewall. It’s tight back there but can be done. Try about 8 oz of this stuff: www.homedepot.com/p/CLR-1-Gal-Calcium-Lime-and-Rust-Remover-CL4-P/202530301 Blow out the coolant in the hear core with compressed air carefully then add the cleaner let stand for 15 minutes then back flush with hose water both ways. Then refill system. Heat will be hot again

[@ivanvega2821]

@@motorcarnut just flushed the heater core. Wow… the amounts of slushy brown goodness that came out of it was concerning. I don’t see how it was working properly whatsoever. On a different issue, the car on idle tends to have a strong vibration that shakes the cabin. I’m thinking it could be trans and engine motor mounts considering it has 136k. Any suggestions to diagnose the issue? Thanks for everything!

[@motorcarnut]

@ivanvega2821 the engine shouldn’t shake that bad to begin with, but yes make sure the mounts are not ripped or twisted.

[@kevkev7164]

Thanks! While this video didn't have the aluminum bracket under the manifold, it was very good. You saved my daughter $1800 and it was possible in larger part because of the video. One recommendation: i took out the large hose (about a 7" section) under the manifold in order to cleanly reinstall the manifold.

[@motorcarnut]

Awesome! And thank you for the donation. Sorry about that brace, the newer ones don’t have them anymore and for to mention it for the older ones.

[@mwm13]

How did you get the bolt off that brace? I’m working on my 2017 and as soon as I read you comment I saw i have a brace!

[@kevkev7164]

@@mwm13 my bolt was a M8 triple square spline bit along with a couple extensions and a magnet extension to correctly move it into place. If i could upload photos i would...

[@mwm13]

@@kevkev7164 I got the 13MM nut off the top of the brace but I can’t see where the bottom even goes. I have to take a break and google a bit more I guess. Do you have a picture you’d be willing to email me?

[@kevkev7164]

absolutely- whats your email.

[@juanjosetorres6703]

Lot of details in your video.. you rock Man!!

[@motorcarnut]

I appreciate that! Thanks for the feedback!

[@TianaDiGiacomo]

Best video of all ! And I have watched all of them lol

[@motorcarnut]

Thank you! Appreciated

[@markeitel]

awesome video! do you have a part number for the pump? sorry if i missed it. Thanks!!!

[@motorcarnut]

This is the aluminium one I used. Not factory plastic one. Aluminum Water Pump Assembly Fits for Audi A3 A4 TT VW Tiguan Jetta Golf GTI Eos Beetle CC 2.0T TSI Replaces 06H121026AB 06H121026CQ a.co/d/59gFEKM

[@markeitel]

@@motorcarnut thanks!

[@brianmooney7009]

Best detailed video ever. You are the man 👍😅

[@motorcarnut]

Wow, thanks! Appreciated!

[@chcou3125]

Did you replace the injector seals or just reuse them?

[@motorcarnut]

I reused them

[@brothareddi]

Thank you for this video. This was very helpful

[@motorcarnut]

Glad it was helpful! Thanks for the feedback!

[@HARTGROVE25]

This video was amazing. Great details and step by step instructions. I think I need to replace my water pump on my 15 CC and this is perfect. Thank you

[@motorcarnut]

Thank you very much! I really appreciate the comment .

[@gloglogo2638]

Maybe you should check your warranty status with a dealer! I did and I was covered under the new warranty. I have a 13 vw cc.

[@senoldzaferoski4926]

Best video I've seen so far well done dude

[@motorcarnut]

Appreciate that! Thanks for the comment.

[@everardosandoval7120]

I’m currently stuck on taking the manifold off. It’s half off and stuck on something, it won’t go back in either.

[@motorcarnut]

Did you take the support bracket off that connects from the bottom of the throttle body to the block? And the fuel injectors are somewhat pressed in the cylinder head and need a little prying to get them out.

[@everardosandoval7120]

Was that in the video? I might’ve forgot that.

[@motorcarnut]

I’m pretty sure it was, if not it was probably missing because it’s a little tricky to install so someone must of left it off but that is not recommended. You will see it where I told you.

[@everardosandoval7120]

Do you know what size the bolt is holding the bracket?

[@motorcarnut]

I believe the one under the throttle body was 13mm and the one on the block was a spline drive but forgot the size 8 or 10

[@valionaidenov9867]

Thank you from Bulgaria!!!!!

[@motorcarnut]

Hello Bulgaria! Thanks for the comment!!