Stepping the mids and highs up a bit!! The Burban gets a few PRV 2.8 dsp installed/overview!

[@Widowmaker2828]

Good stuff! Thanks for going through the DSP. I have one definitely on my list and may go with this PRV model because of this vid. Thanks again and your truck is looking great! Lot of hard work for sure 👍💪

[@BradBecraft]

Thank you! These prv dsps are super nice i like how u can tune on the fly no need for a laptop or anything

[@Catchmeifyoucan209Stockton]

Dude crack the garage bro please! As a former medic I could tell it was getting to you. I know you have a big garage but it dont take much especially if water heater and/or heater furnace is going as well. Once you cross threshold and pass out there's no recovery!

[@cesarconh895]

Sssshhh 🤫 it's natural selection in action

[@topandrun126]

Wow that is a awesome crazy setup.

[@bjvincent9731]

I got a 95 gmc burban that I'm starting. Love the big bodys.

[@TeacherBrunoOneil]

I have a dsp like yours but it’s sold under a different brand in Brazil. You are aware that this is a Chinese product sold worldwide, not complaining about it though, it definitely suits its needs. I would buy one with Bluetooth now. Mine doesnt have it. Unfortunately I am no longer in California and Amazon sucks in Brazil. You should have 12” instead of 10”. They take up more space but their bass tends to be better and stronger and you would need less speakers to accomplish the same goal. I wonder if you have any mega capacitors hooked on your power line. I liked the amplifiers. I was reading that there are amplifiers specially designed for certain range of frequencies - like they answer better for bass , mid and high. ( without setting up the crossover on them ). I’m an electrical engineer and my graduation project was design a class H amplifier. I still remember it. Designing and building an amplifier from scratch gives you a whole different perspective of audio systems. Great car and audio system. Congrats

[@BradBecraft]

Awesome i like this dsp forsure makes it easy to tune an i think im gonna switch mids an highs soon just need to redo my door panels

[@stevenstuart4813]

Thanks for the info. I got four 6K crescendos. I'll add one of these to them.

[@BradBecraft]

Good deal! U will like them!

[@EVO_IX]

Good quality brand you using. Especially the banda amp

[@patfinley82]

That dsp is sweet. Good work man,

[@MrMan-ol4ic]

I just got my PRV2.8 DSP yesterday! Any pointers or suggestions out the box? I did spend about 30m going over the manual etc. It's definitely a SICK unit for sure!

[@BradBecraft]

Im lovin mine i set the dsp like the video an then go threw the headunit aswell till im happy with it

[@AstroTundraBASS]

looks like a beast, I need to see the inside of the BOX man

[@BradBecraft]

Check some of my videos i have a few of it playing an it shows the inside

[@johnviera3884]

Try playing with the delay. I play a solid mid kick drum and adjust the delay till the subs and the mains line up

[@champion31337]

You never mentioned the one problem this DSP has. Its the reason im scrapping mine and going with ds18 dsp. The inputs on this prv maximize (aka light up and make a clipped signal) before 2.5 volt on the rca. Only way to avoid this is literally going to the head unit and decrease your gain on your output by 6db (on my alipine) or more in order to turn off the input light. This defies the point of having a HU with strong rca preout voltage.

[@Strange087]

That's a clean system 👍

[@BradBecraft]

Thank you!

[@donjaun540]

Super nice.

[@angelnoguera1209]

How do you set up the Graphic Input Equalizer Parametric Input Equalizer Parametric Output Equalizer Im running 8 apocalypse M61ae 6.5 speakers Only setting i have is my HPF is set 150

[@pokerman9108]

crazy build

[@BradBecraft]

Thank you

[@1ohmwrecker]

Can I use this dsp on my subs? I don't know much bout em, but I'd like more control cuz I'm using an Lc2i at the moment. And taramps crossovers suck. But Amazon got em for $130 right now.

[@BradBecraft]

Yes you can im going to get another dsp for the sub stage soon so i can tune for different settings like burp, music, loud demos lol

[@catherineharris4746]

Nice!👍👍👍

[@lastkings2075]

So I’m guessing I don’t need a equalizer,crossovers,epicenter this covers all of that ?

[@BradBecraft]

Yes it should this is all i run now

[@lastkings2075]

Men you just save me a lot of cash thanks a lot men appreciate that thanks for the fast reply

[@BradBecraft]

@@lastkings2075 no problem glad i could help

[@zaywilds3579]

This thing is going to be insane when "Completed"

[@BradBecraft]

🤙 thank you!

[@dk9696]

Whaaattt???? This thing is already INSANE! Dude really has passion for car audio !

[@druduns1]

It never ends that’s how he got to this point!! 🤦🏻‍♂️

[@gkartel007]

Hey bro.. what ohms are the 10's in the front doors wired to???

[@BradBecraft]

All 4 in each for are wired to 2ohm per channel on the nendo 3000.2

[@nvx8k]

I like the prv dsp but I love the banda expert dsp you can control it with your phone

[@georgesrisomsak9650]

I've been contemplating that dsp, and already have the Stetsom version of this prv. Anything you don't like about it, or is it missing anything that the Prv or Stetsom can do? It's even cheaper a bit!

[@YaboiGee850]

I have the same thing in my truck, is there anyway you can stop the speaker static noise, any type of way I love the sound but the extra noise I can’t do it

[@BradBecraft]

Mine does it to but only when i turn my alts on...make sure all your grounds are nice an connected and nothing is loose most the time its a ground problem ive found out in my build anyways

[@YaboiGee850]

Thanks because the sound Quality awesome, I love how it sounds but that extra is crazy that’s make me take it out….

[@BradBecraft]

@@YaboiGee850 forsure maybe check the grounds /add a ground see if it helps rcas could cause it to

[@YaboiGee850]

Okay thanks again..

[@BradBecraft]

@@YaboiGee850 no problem hopefully you get it figured out!

[@SPLBeast]

How do you like that DSP , looking to purchase my first one

[@BradBecraft]

Like it forsure worth it imo

[@SPLBeast]

@@BradBecraft Thanks 🤜🤙

[@joshjorgensen2002]

What happens when you got amps with built in crossovers, will they not produce sound? I had 4 crossovers i had installed and i installed my amp and no sound would be pushed through to my speakers until I disconnected the 4 external crossovers

[@joshjorgensen2002]

Question is will it still produce sound even with the crossover built into the amps

[@BradBecraft]

It should i set my amps like normal and tune with the dsp it works fine for me im not 100% sure tho

[@nickhaley1212]

Turn the settings on the amp off or on full range and the rest of the settings make sure there off or set higher or lower on the amp than on the dsp so the amp does not interfere with the dsp settings like if your crossover is set from 20hz-100hz on your dsp make sure it is set to 10-130 on the amp, this is just a reference by the way to give you an idea on what I'm trying to say lol.

[@BradBecraft]

@@nickhaley1212 thanks for the info

[@bade-bike1930]

Can I have the link to the cooling fan for the amps?

[@BradBecraft]

Attwood 3000 inline fans on Amazon

[@bade-bike1930]

@@BradBecraft thanks bro love the channel

[@BradBecraft]

@@bade-bike1930 no problem i appreciate it!

[@rudyroy9132]

Clean set up👍

[@BradBecraft]

Thank you

[@evanz6411]

saw him on the highway came straight here

[@BradBecraft]

Thank you!

[@danparmer9875]

That burban is bad ass bro!! I have a Tahoe I'm building. Can u tell me what your setup is for your gauges?

[@BradBecraft]

I just use the edge Insight cts3 gauge cluster for my gauges works great!

[@shadricksimms]

This is similar to the stetsom 2448 thanks it helped

[@BradBecraft]

Awesome!

[@johnnybhageloe8904]

Hello prv dsp cant use voor subwoofer or only mid and high

[@ryanjohnson1814]

Can u tell me, how u are ensuring the frequency, signal from dsp, to amp, out of amp to speakers, is actually that freq, signal, my amps don't have pass thru, they have settings and standards turn dial, frequency. How to not have amp, distort, import settings from dsp ??

[@nickhaley1212]

Turn them off or turn the setting on the amp lower or higher than the dsp so they dont interfere with the dsp.

[@0XxDOMESHOTxX0]

Your low pass filter wasn’t on for your 10’s

[@rickiecharles6450]

What brand are the tens in your front doors ?

[@BradBecraft]

They are American bass godfather 10s in the front door

[@ROBBG88]

Nice build but u do know you dont get hit for copyright till you get a 1000 subscribers i believe anyway love your build bro beasty

[@BradBecraft]

Ive had a few of my vids taken down for copyright when i play just vocal :(

[@got2getit204]

So my 8k really ain’t sht out here!

[@jonnywood9272]

lmao dats my dream truck :/

[@poohwecampbell7799]

I’ll pass if I need this for a amp they can keep it !!!

[@haygood9]

Way too much dude, I couldn’t figure any of that out.

[@JoshC321]

Why not get a better DSP to connect to a computer? Using that tiny screen and menu options are tedius.

[@BradBecraft]

This works great in my application no need to spend more money on stuff i dont need imo and this is all in one unit i can tune on the fly and turn each channel off if needed super fast an for the price u literally cant beat the prv 2.8x imo

[@1012taz]

Exactly!!! So every time i need to tune and make adjustments. I have to break out the laptop. Lol!!! Nope im good. Same thing with Bluetooth DSp's if the BLUETOOTH function ever fails,and can't reconnect to your phone. Thats Game over!!!