BECKETT OIL BURNER WILL NOT FIRE UP

[@scottk0623]

Great customer, I always like the conversations with the older folks. They are the most appreciative for what you do. We need to take care of the elderly, that will be us someday.

[@pootthatbak2578]

If we could exhibit some humility and grace as our seniors often do..we would improve as a species..alas, the yungins never listen

[@petero2693]

Maybe..

[@scottk0623]

Peter O God willing

[@milotorres6894]

My younger days doing yard work for retirees ,storied past were my highlight after finishing job , such nice ppl especially the Grindells , and Mc Callisters Good folks all around ,✌️✌️👍💪🙏💙💎💎😔

[@btrav667]

@@petero2693 Yeah, let's see if the check clears......ha ha !

[@JohnnyCab]

Steve your a good man taking care of the old folks ! Farmers and All

[@jeanclaudevandam4974]

I've learned so much from you Steve. Every time I see you working on these boilers u learn more and more. I maintain and repair my own boiler since watching you. And I'm not a hack like most homeowner weekend repair guys. Lol

[@Dominick_Calvitto.]

Steve's a Great Guy i learned a'lot from watching his Videos,,

[@g-lato9791]

Brake cleaner is amazing when cleaning these burner assemblies

[@Mrcaffinebean]

Gotta love the old oil units, everything is so simple.

[@danbell1733]

Have no fear Steve is here!

[@jorgerodriguez-od7mr]

Thanks so much. I watch you video I'm working out for me. Great job, Steve keeps the good work 👏

[@rabidfarmer9765]

I love your clean work - many thanks!

[@davidgilpin5200]

Steve Lav workin' on a Beckett in August, y'all. Payin' the bills.

[@craigharding475]

I would get mine worked-on too, but we have mid-nineties heat wave, and I expect that my tech is still busy with AC units.

[@jlo13800]

Nick Chubb switched our church from 120/240v open why delta to 120/208v 3 phase and Bradley Chubb says the iron fireman burner motor will run on either voltage

[@jlo13800]

Dak prescott serviced it and soot flew everwhere

[@conor8FL]

Great info, video. One question, how and when to you adjust the air intake on left side - next to oil valves....same type burner, but a Gramsby stove

[@acuraledgend9648]

Great video ..saved me a maijor headache ......same issue ...i got no spaak ..lol great video

[@careyaxt5738]

I like the shots of the truck.

[@robertoportillo4786]

Great Job ! Im a beginner in the field, Is that correct that having a delay valve and light up right away …. I guess the burner has a R8184 A

[@tylersimpson-g5s]

there should be a 15 second delay to establish a good draft with a delayed oil solenoid and if it lights off right away then the primary control is bad because that is where the timer is being set from and what is controlling the burner circuit

[@Okanagan48]

Don't fear, Steve is here.

[@adamedwards2435]

Fuel, air & spark= combustion 👍

[@russellhancock9765]

I used to have a house in Asheboro North Carolina that had a furnace with one of those things. I hated it because every time they brought Me oil, it gave trouble. Unfortunately My tank was full of rust. I don't live there now, so that house is somebody else's problem now.

[@craigharding475]

I see...the oil pumped-in probably stirred-up a lot of sludge from the bottom and the furnace sucked it in. When I fill my tank, I shut the furnace down and give the tank a few hours for the crap to settle to the bottom. Sometimes, the oil company does not flush-out their truck tank and they add sludge!

[@donnierobertson3088]

Great job and video like always ( Steven )

[@jlo13800]

Nick Chubb replaced an ignition transformer to our church oil burner nuclear fusion accelerator, runs on 208v 3 phase!

[@irgski]

…”sure I can fix it…that’s why you pay me the big bucks!”

[@christochristov1259]

Thank you man you helpful and funny I need you to fix my burner I am in north New Jersey

[@jlo13800]

Nick Chubb found control fuses blown in a 440v powered iron fireman and got it to ignite by nuclear fusion!

[@rodneyskinner7741]

Afternoon Steve and “Miss Molly”!

[@Rickugg]

He could have checked for spark first thing. I probably needed new nozzle for sure.

[@jlo13800]

Nick Chubb replaced the spark transformer at our chruch and it runs on 120/208v 3 phase

[@WeatherNut27]

Title could of been "Burner Issues, Crazy Bull Story"

[@WeatherNut27]

@RedLiver I couldn't understand 80% of what that guy was saying. Lol. Not bad english though for no school

[@malachy1847]

@@WeatherNut27 I'm from Ireland and can understand every word... maybe he has Irish lineage...

[@mcburcke]

Steve: "Spock" Customer: ???

[@malachy1847]

I was waiting to hear the phrase,"Good enough for this Neighbourhood anyway."

[@blazeandcyrus]

This Portuguese cat could have his own youtube channel, seems like a really good guy. Good job Steve as usual.... "Of course I can fix it, I ain't gonna let ya stinkin" :)

[@seniorcomputer3292]

Second job I saw the electrodes cleaned. Something new to me: No spark. Defective transformer. Great job.

[@davidnull5590]

There are a few other things that will give you No spark, you have to diagnose before you start changing things.

[@craigharding475]

Steve said he was not a fan of electronic transformers. Do you have any idea why?

[@TheTruthSeeker756]

Nope it was my taco 571-2 zone valve that needed to be unstuck

[@danielashbaugh9462]

love your videos steve.

[@plumbingplumbing6429]

Lmfao he might not take a shower for another week 😂

[@frankrizzo3915]

Some people just dont like to clean their furnace.

[@JE27898]

I understand the premise. You realize that everything old is new again. How many old systems had interrupted ignition and oil valve. I dunno. It’s not a contest. lol

[@patrickguarracino3174]

Mikey pipes, said you drive a bread truck !!

[@Hvac-dude]

Hi steve!!!!

[@johnwalker890]

Your the best at those oil burners, Steve, good job.

[@t.c.bowling1934]

I'm an equipment guy. What brand of backhoe did this customer have?

[@stevenlavimoniere]

its and small old ford i believe would make a good back yard unit

[@Fireship1]

The smart people are having their boilers and furnaces looked at now. The not so smart ones always seem to call on the first freezing day of the season. And for me, it’s always the same 10-12 people!

[@fourfortyroadrunner6701]

I do not miss working on oil. One was REALLY nasty. It had "puffed back" and sooted up house. I went up there, tore down the burner, checked oil supply, spark transformer, changed nozzle and fired it back up Worked OK. Decided to check pump pressure. Did so, reconnected everything, fired it back up. Had great draft, exchanger seemed clean, fire looked great. House remodel resulted in wall quite close to front, you had to lean on wall and lean over to look into inspection door. I propped it up with wrench and had my mirror out, It had been firing maybe a minute just great when it puffed back again. WHAM I had my glasses on, otherwise...............................Owner had been thinking of converting to high efficiency gas (L/P for them there) and that was IT. Never found the cause. I asked the crew to dump the old one at the shop so I could diagnose it further, but they took it to scrap. Crew said they found nothing in chimney. This was in the late 80's

[@jlo13800]

Bradley Chubb replaced the church oil burner unit with fusion and is now on 460v 3phase, he closed the breaker and nick chubb noticed a big blue white fireball! Saquan Barkley found it and stomped it out thank god!

[@jlo13800]

Odell Beckhamm says an OBIT can be dangerous and draws big arcs of of 15kv

[@jlo13800]

Baker Mayfield had a oil burner soot back on him a few times!

[@kevinbrady4873]

I have a beckett like that on my furnace..piece of shit, I'd love to put a 9mm in it

[@Psalm1101]

Steve i have a newmac

[@pootthatbak2578]

Thats twice in the last few videos you shouted out the slogan of the human shoprag, Elkskins. Fire it up, fire it up, fire it up!

[@CiscoWes]

Ya got no spaaak

[@johnnyfiveable]

Got no spak

[@slyspy9819]

I can smell him from here🤣

[@Jesus-bs5fl]

You make hamburgers out of him? hahaha

[@MajorityXII]

Lol he's saying hamburger. Make a hamburger out of the bull for biting the owner. Boston people talk funny. At least I think this guy is from Boston. You just happened to have a spare transformer in the truck? Why do you even need a transformer? Isn't it 120V?

[@tonym6920]

Hey Steve and Miss Molly! Workin’ again y’all. 👍👍. it’s a real stinker mama! Nice job Steve!

[@Bdenn570]

Love the accent

[@realestateservicessaleshea99]

Stay safe. 🥃🥃🍺🍺🍺👍🏻

[@potbelliedolman8939]

Of all your vids I've watched, that's the 1st to see all the dust bunny's!! I wondered if screens were missing off vents!!!

[@shawnwhite3662]

Lol The first sign that fall is slowly coming

[@russellhancock9765]

Sounds like the tank is full of crap Momma.

[@erikj.2066]

Oil flow when he showed up. Not the problem.

[@jamesa6272]

So how’s your sheep? Continues story about sheep. Look at all the flippin dust guy.

[@jdstudwell9853]

No Spock What about Captain Kirk. 😂😂

[@fourfortyroadrunner6701]

I bet some of you new kids don't know why the shutoff valve has the stem sticking out the way it does...................

[@justrandom1145]

no, explain

[@daves2354]

I bet some of you smug boomers have knowledge that you seem reluctant to pass on, just so you can sh** on the dumb "kids" and maintain your feeling of superiority lol

[@anthonykotoff3041]

👍🏻

[@JE27898]

An electronic transformer can’t be tested by jumping the arc across the electrodes. It shorts it out. However, there are only so many cycles those transformers run before they Peter out and don’t work anymore. Just like you Steve, I hate them as well. Good work

[@lordgilby]

I've seen the rep from Beckett in PA do a screwdriver test to it and recommend it. I'm not fond of spark ignitors all together

[@JE27898]

@@lordgilby He shouldn’t have. That can be done on a copper core transformer. But there is a chance that the electronic transformers can short out. I’m not fond of them either

[@martinperchak9360]

My parents built their house 67 years ago, My brother now owns it , the furnace has a beckett system on the hot water baseboard, its all original system, just new nozzles every few years. Its not very practical system. He will have to decide.

[@craigharding475]

Thanks, man! I wondered what it was. I just paid $600 for a service call and one of those. I am glad I did not try to test it. How DO you test one? (electronic transformer)

[@JE27898]

@@craigharding475 They make a tester. Or you can use a multimeter. Depending on how old one is determines if I test or just replace. Generally if you have oil at the drawer assembly, the nozzle is good, and the motor runs, it’s time for the transformer to be replaced.

[@patrickvangoubergen9528]

precies 100 jaar terug , oude brander ,slecht voor het milieu veel roetuitstoot nog veel werk aan de winkel ginder

[@christopheromeara689]

No Spock!

[@rcpasc1948]

It wasn't gettin any spock! You must watch Taryl Fixes All videos. Fire it up! Fire it up! Fire it up!.

[@winstonnewell6112]

and thers your dinner

[@wilattwood5915]

After 50 years of working on oil-fired heating systems in Alaska you can't possibly properly tune an oil burner without an analyzer you need to know your flue-gas temperature the O2 and your efficiency otherwise you're not treating your customer properly and you're going to have issues with the burner

[@edwardshean319]

Dead right,in law in UK to prevent co poisoning

[@pinnkang]

No spock😂