Stone Carving slate with Dremel type tool.

[@hughtempleton8640]

I love the way that you have left it with the roughness around it as i think that it adds to the charm with the smooth butterfly against the rough slate 👍 .

[@thestonecraftingworkshop7490]

Glad you like it! And thank you for watching.

[@weldmama]

you've done really well with this . If you get a flex shaft to attach to the rotary tool you will find it much easier to do delicate work with as you dont have to worry about trying to control the motor with your hand - which can be tiring and hard to do precise work with. If you use small diamond ball burrs or diamond pointed burrs around the edges to carve in the initial details you can then remove the paper straight away and not worry about losing your detail.

[@thestonecraftingworkshop7490]

Thanks Ruth, I have been looking out for a shaft for the parkside tool but not seen one yet.

[@Babyjohn8170]

Thank you for sharing this video. I just started engraving one day ago. I began with woodburning and I truly enjoy it. However, engraving combined with wood burning intrigued me. Watching you carve this butterfly in the slate has peaked my curiosity and I want to learn even more. Thank you so much.

[@thestonecraftingworkshop7490]

Definitely have a go! It is a great hobby and very rewarding. Good luck and please keep us posted how you get on.

[@jessegalvan4655]

I absolutely enjoyed watching your videos. Thank you so much for sharing them.

[@thestonecraftingworkshop7490]

Glad you like them! Thank you for watching!

[@foxdenham]

Great first job. Thanks for sharing this. I've been fine detail carving into cast Jesmonite with a rotary tool (with varying results). Rotary tools are superb once you know what each attachment can do and when the 'fine tuned' work is finished off with small, chisels, hand tools etc. Makes me appreciate those superb copper wheel glass engravers thats for sure. Cheers.

[@thestonecraftingworkshop7490]

I too am finding that as I practice using the various tools the end results get better. I was not familiar with Jesmonite so googled it. I see It is a resin cast material. Do you make your own or can you buy blocks? Thanks for watching and good luck with your carving!

[@MrDoohdaah]

Hi there, I've bought a cordless rotary tool for just small woodworking jobs. But your video popped up of you carving a slate " parkside" sign, (I have the Aldi version). It's inspired me to make one myself, I thought your video's very natural and honest. I need to buy some diamond bits for it now. keep up the good work, I'm going to subscribe. Albeit I might not carve much stone but we'll see. thanks again.

[@thestonecraftingworkshop7490]

Hi George, this is such a useful tool I'm sure you will find many uses for it and if you do do a bit of carving then that's just great! Enjoy!

[@williamhollaway2198]

I thoroughly enjoyed your video. I am a beginner rock Carver as well. I'm not that good ,but it's great nerve medicine for me. Thanx again for sharing. GBU

[@thestonecraftingworkshop7490]

Thank you for the kind comments, I too find the stone carving very relaxing. Keep at it and you will improve it just takes practice. Good luck!

[@Murch2013]

Hi Steve Just to let you know I find your videos very enjoyable and inspirational. I have begun carving some of items you have done and I have been very suprised at the results. Thanks again 👍

[@thestonecraftingworkshop7490]

That is awesome!

[@lisacole1770]

Thankyou so much for showing me it can be done for a beginner and for the encouragement, god bless :)

[@thestonecraftingworkshop7490]

Hi Lisa, I hope it encourages you to have a go! Thank you for watching.

[@marcwheeler4406]

Oh your design work is really good I tip my rock painting hat off to you, I've been painting on rocks since a year ago and wanted to get into trying to sculpture rocks this year i received a dremel from my husband for my birthday( but didnt realize at the time I'd have to get diamond bits I assumed they came with the extra bit set I also received, also) and most likely a fume/dust collector and a respirator which they are in short supply here very super expensive if you can find them. Its a bit like lysol or bread and many other things,.lol. .(.i dont know why I laughed about that I'm just bit more nervous lately.).I just needed a bit more of a hobby than painting to take my mind off the chaos in america I've been watching quite a number of artists from a millner to a watercolor artist from overseas, theres so many talented artist like you willing to show us your skills thank you for doing these videos theres alot of people who appreciate it like me whoes isn't quite a beginner yet although I did own my own landscape business and laided alot of stone walls and plenty of times I had to cut or chisel bits off so you would think I would have thought of that I would need some I do have three big expensive diamond saws just not any tiny bits I didnt even think i would have thought I needed dremel bits that were diamond but I assumed cause the rocks I have are small no bigger than 3by 4inches (I guess when crazy is happening around you your brain isn't in a good place to focus and your more in a survival mode)..oh I forgot you probably use centimeters well sorry about the inchs to centimeters conversion, well everything I'd like to try to increase my hobby skill level is a bit more product to buy here and with things wonky in our stores here in USA we are still stocking up on necessary things for a back up plan my husband and I the good thing is we have a homedepo and ace hardware near us so I can keep looking for coupons on their site and when price is right I'll grab some bits till then ..lol im goning to keep watching tho even if I cant get everything I would need to do this hobby now atleast I will have a bit of knowledge when things turn around for the better here after our election and our new president gets sworn in in January it's just nerve wracking between now and when first week of election in nov is over. Stay safe and thank you again. ..mikelle newyork strong mom in usa😷✌👋🗻 learning new skills....

[@thestonecraftingworkshop7490]

Hi, You will not need a dust extractor if you rig up a water supply, you can do this really cheaply if you use a camping shower bag. see here : kzbin.info/www/bejne/npKzkotppdmUn6s Using water is the best tip I can give anyone, makes grinding stone easier and preserves the diamond tool. If you can't get diamond bits at the moment you could practice your skills on wood using the burrs supplied with the tool. Carving is a really absorbing and calming occupation and I am sure it will give you great pleasure and peace of mind. Thank you for the thoughtful post and you keep safe and keep carving!

[@karthiganapathi407]

Excellnt presentation and getle way. Too Good. Please share further projects.

[@thestonecraftingworkshop7490]

Thank you, I will thank you for watching

[@ghostravenXX]

Nice job . Looks great with the natural matrix . I have some 1'" thick slate slabs from an old schoolhouse ( in Canada some schools had the slate countertops in the chemistry labs ) so I might have to give this a try . Thx for sharing

[@thestonecraftingworkshop7490]

Sounds great! Plenty of material for carving, enjoy!

[@laurataylor1923]

This is beautiful.

[@thestonecraftingworkshop7490]

hi, Thank you! I was not entirely pleased with the end result myself but I am practicing and I think I am getting better. Thank you for the kind comment though.

[@christianwilde3668]

Thank you!!!!! 💕 i love the slate!!!!!!

[@thestonecraftingworkshop7490]

You are so welcome!

[@lancelottavola9685]

it looks like a nice style artistic buterfly standing in a rock surface,practice makes perfection,LIKE 👍

[@thestonecraftingworkshop7490]

Thank you so much 😀

[@sanamtamang898]

Hi it's me sanam from Nepal.. I am also doing stone carving but I am doing our tradisanal way full doing hand .. I can see your work .. I like it ..

[@thestonecraftingworkshop7490]

Hi Sanam. All the way from Nepal, amazing! I am pleased you like my work and thank you!

[@maldelamare4444]

Good job well done, inspired me to have a go. Im in North Wales so there should be some slate about!

[@thestonecraftingworkshop7490]

Hi Mal I love Welsh slate for carving, you may also have other stones near you, don't neglect them!

[@MyOrganicVlogs]

Good work 👍👌

[@thestonecraftingworkshop7490]

Thank you so much 😀

[@timbarratt207]

Hi Steve, great video... really interesting! I’ve just started carving and engraving on slate (I’ve got a lot of really nice Bethesda purple slate). I’ve been using the Dremel, but I’ve got a 42” flexible extension shaft, which makes it much easier for very fine work. :-)

[@thestonecraftingworkshop7490]

The purple slate is a lovely material so you will love working it. The shaft drive does make for better handling but when attached to the Dremel I think it might lose a bit of power? Anyway enjoy yourself!

[@robinmc8200]

I am actually new to the stone carving with a dremel. After finding a regular dremel and another with the flex shaft i have a lot of questions but first does water help keep the burrs cooler and last longer?

[@thestonecraftingworkshop7490]

Hi, yes, a good water supply greatly improves the cutting of the burrs, makes them last longer and reduces airborne dust almost completely. if you look at my more recent projects you will see my water feed in action all the time. I did make a video on how I set up my water supply. The only down side is working with the spray. but I prefer a bit of water to a lot of dust. Good luck with your carving, it is a very satisfying hobby.

[@TedNiemczyk]

Awesome!! . Wondering if using some water would save the bit and perhaps make the process easier.

[@thestonecraftingworkshop7490]

Yes, definitely, you are completely right! It is also much safer ( no dust ) I always use water now if possible, I have made videos showing two ways of supplying water to the burrs and how much better it is. Thanks for watching and for the kind comment.

[@bridgethegap6873]

It would’ve been helpful to share which of the bits you were using for the different things and how long they were lasting...Or anything about how they worked for u lovely piece regardless

[@thestonecraftingworkshop7490]

In general I chop and change bits constantly when carving anything, but I will try to remember to show the bits as often as possible in future. Thank you for watching!

[@paul1962uk]

Hi Steve, I have almost completed my first carving in slate, do you put oil/sort of varnish on the carving in relief you've done to make it stand out?

[@thestonecraftingworkshop7490]

Yes I do, I usually use teak or slate oil. Use sparingly and buff off well. How did the carving go? Did you enjoy it. Cheers

[@lauriecremore5601]

Neat working ... Interesting thank you. 👍

[@thestonecraftingworkshop7490]

Thank you, this was my first try at rotary carving, I have learned a lot since this piece.

[@bridgethegap6873]

I wish you would’ve talked about what tips you were using for different things...and showing them & shared how long they lasted

[@thestonecraftingworkshop7490]

Hi, I will try to bear this in mind for future videos though this is not a precise process, I chop and change bits throughout any job. Cheers and thanks for watching.

[@rafvalley980]

You're ready for Welsh gravestones now!

[@thestonecraftingworkshop7490]

Hi, the thought of making a full size headstone with only a Dremel is a daunting thought! Curiously though I did my apprenticeship as an ecclesiastical marble mason so maybe I could do it at a push LOL! Thanks for watching and the scary idea! Cheers.

[@williamjhunter5714]

Create a vacuum dust collection unit or water suppression method because the silica dust goes in the lungs and never comes out, causes silicosis.

[@thestonecraftingworkshop7490]

Yes, see my video on dust safety.

[@paul1962uk]

How about using a pantograph with a white or bright coloured colouring pencil to copy a design onto the slate?

[@thestonecraftingworkshop7490]

That might work with a Chinagraph pencil. Let me know how you get on! Cheers

[@tipthebalance]

This is beautiful! I love the hewn effect at the end with your splitter. In the absence of stone masonry tools (apart from some hefty bolster chisels) I’m guessing that attempting this with a wood chisel would simply damage the chisel? Also...what did you treat the slate with to finish off?

[@thestonecraftingworkshop7490]

Hi, wood chisels can work softer slates and stones but they are sharpened to a thin edge that has a tendency to chip. If you are happy to re-sharpen to a thicker edge as it happens wood chisels can work well as stone chisels. I use teak or slate oil to finish the slate. Thanks for watching.

[@wrenjussaume9595]

Where do you get your slate sir? I'm looking at a small project similar to this but I don;'t know where to look for stone to carve.

[@thestonecraftingworkshop7490]

Hi John, I have stock from my past work I use, I also pick up rocks on my wanderings! Many garden centres sell random slate and stone for landscape gardening, if you have a way to saw it up this is a good source as they will sell one piece at a time. Check Yell.com for local stone suppliers, Landscape supplies and stone masons who may sell you off-cuts. You could also try eBay, people often sell left-over slate tiles. Marble workshops also cut slate slabs and may have off-cuts. I hope you can find something and have a go. Best of luck Steve

[@nickhall5959]

Brilliant especially so as its your first attempt. What stone were you using to flatten the face after carving ?

[@thestonecraftingworkshop7490]

I used one of my polishing backing pads with a diamond polishing pad, probably 100 ish grit. Thank you for the kind comment. Cheers

[@bryan6721]

beautiful

[@thestonecraftingworkshop7490]

Thank you for the kind comment, I hope you will take this up and show us the results?

[@larryib]

This is awesome 😎! Where do you purchase your chisel tools sir?

[@thestonecraftingworkshop7490]

Hi lawrence, I buy chisels from stonemason suppliers, the diamond burrs I used on this job I bought on ebay. Hope this helps and thank you for watching.

[@Ronie792]

Have any ideas on a water system

[@thestonecraftingworkshop7490]

Water feeds - kzbin.info/www/bejne/hneafWN5nJiYZtk kzbin.info/www/bejne/npKzkotppdmUn6s

[@monirmunssi3272]

Good wark.very naice. Javed dhaka. Bangla desh.

[@thestonecraftingworkshop7490]

Thank you, and thank you for watching.

[@mohammedrayees7108]

Hello Sir... I need this router How can I get...

[@thestonecraftingworkshop7490]

Hi, this grinder came from Lidl. You can only buy this when it is in store. The only other way is if someone is selling them on eBay but this is usually an expensive way. There are plenty of other makes of rotary grinder on Amazon and eBay. Good luck and thank you for watching.

[@argusan-uq9fq]

İ wished you used a dust mask or use plenty of water during carwing, that kind of dust might be very harmfull to your lungs sir.

[@thestonecraftingworkshop7490]

I always use a mask, even when I am also using water (later videos) . You may have been confused as the narration is a recorded voice-over and so sounds as though I was not wearing a mask. But thank you for the concern and for watching.

[@argusan-uq9fq]

The Stone Crafting Workshop very happy to know that, and many thanks for your dedication on your art and craft and thank you for these great ideas and beautiful video workshops. You are giving wonderfull lessons and great inspiration. Many thanks sir 🙏✨✨🤗