Cub Cadet ST100 22 inch Wheeled String Trimmer Repair. Bent Spindle. 159cc
Пікірлер: 33
@vitale6633 Жыл бұрын
Clever procedure to straighten the spindle mount ! Thanks for sharing.
@CJsellsSoCal Жыл бұрын
Nice! I have one that’s gotten bent too. You’ve encouraged me to try to bend it back than give the thing away👏🏼🤞🏼
@EverydayJourney11 ай бұрын
Did it work?
@AntonioClaudioMichael2 жыл бұрын
Nice repair on that bent Spindle
@Rambleon444 Жыл бұрын
That is a pretty beefy spindle I bet it fell out of a truck bed or something. Respect... Very clever way of bending it back.
@EverydayJourney Жыл бұрын
That could have done it, never thought of that
@philliphall5198 Жыл бұрын
I’m thinking you are right about that, it’s a fact there treated terribly bad and they try to destroy them in a month
@rollandsaxton Жыл бұрын
My Nieghbor just gave me one but she said the spindle locked up. I think it’s a common issue with these if they hit a rock or something I don’t know she said that’s the second one that’s done it. She thought the spindle seized up
@GoldenTurtle133 күн бұрын
would it be possible for you to provide a view from the bottom of the spindle? (underside of machine). Thanks!
@chuckb.50762 жыл бұрын
Well done. Thank you.
@EverydayJourney2 жыл бұрын
Just trying to show how to use whatever means available to get the job done.
@danielmanning499917 күн бұрын
What is the bolt that holds that bottom cover on the spindle. Mine came loose in the brush and can’t find it yet. Guess I need to replace. Thanks man!👊
@EverydayJourney7 күн бұрын
That’s been a while now. I wish I could help. Maybe you can find it in the parts diagram. You should be able to find one online
@philliphall5198 Жыл бұрын
Yep it’s AllWAYS a fuel carb on all small engines Remove and clean
@philliphall5198 Жыл бұрын
Good job and it will wak the weeds down now
@danielmanning499917 күн бұрын
👏👏
@VitiatedsHOWTO Жыл бұрын
🤣🤣🤣🤣here because a a totally different issue but it answers my questions
@33butterzucker33 Жыл бұрын
..hier auf dem Lande weiß man Soldaten schon zu schätzen, genau so wie Handwerker usw….
@EverydayJourney11 ай бұрын
Danke fürs zuschauen
@XroorX2 жыл бұрын
Have a 33” walk behind with same issue and it’s also the same company!!! Lolol
@EverydayJourney2 жыл бұрын
There might be a quality issue with the brand. It’s a shame that companies don’t build things to last anymore
@philliphall5198 Жыл бұрын
Worked on alot of them and was carb problems and fuel issues Never seen one that looked like it ever had a oil change People really abuse them badly
@philliphall5198 Жыл бұрын
He should give you one for fixing them
@modifyman6977 Жыл бұрын
That is a loaded suggestion. Which one?
@modifyman6977 Жыл бұрын
@ 13:20... Persuasion! Persuasion! Never force a tool past its safe, recommended, fully engineered ability...with out proper safety equipment. I would had suggested using 2 clamps...oh, there it comes! And a third for good measure. You have that board strapped to...? All right. lets see the performance quality of that ratchet strap. ....@13:50... Let me figure what popped. Was it the strap at the end? Or what it was fastened too? That doesn't make sense...hmmm. It seems that once you had it bent back some, your vertical 2 x 4 could had been lowered some for the new position...current position of the spindle. Onward... @14:27 ahhh yes...the welds...cold bending. Sometimes making that decision between heating metal or not before bending, or bending back is a call from the metallurgy gods. Conclusion... Belt wear, yeah. What about bearing wear? I'm curious as to the direction of the bend after the reassembly. I would had put it forward to account for the belt tension. But then that is just my conclusion after watching your fine fix. New Spindle cost would had been more than what was paid. Well, your buddy knows which machine to let the new guy use. I didn't find what what I was searching for but this was still a good piece of knowledge here. Thank you. I am trying to determine if I should disassemble the spindle, (new machine) and clean then repack the bearing/s myself. I have noticed that doing this with riding mowers, the spindle bearings last much, much longer. The factory just don't want your machine to last that long without some thing breaking or wearing out. Usually the bearing goes dry and by then the bolts are seized to the spindle, thus breaking when trying to remove them. Aren't engineers the best? Oh. What was that strap fastened too?
@EverydayJourney11 ай бұрын
If you have the time, greasing the spindle bearings is the way to go. Also, the strap was only wrapped around the board on one side and the spindle on the other
@curtislacy86022 жыл бұрын
How do you tighten the v-belt ?
@EverydayJourney2 жыл бұрын
There is a tension pulley that is spring loaded. It takes up the slack in the belt to tighten it
@philliphall5198 Жыл бұрын
I can’t stand to lay my tools on dirt and bolts eather Get some cardboard at least
@Alex-lz2gn2 жыл бұрын
Mine starts but won’t stay on, any ideas on a fix?
@EverydayJourney2 жыл бұрын
Chances are good that the carb jets are dirty. Once clean it will probably run right
@gregmccarter2176 Жыл бұрын
Just picked one out of the dump pile...needs a belt...
@modifyman6977 Жыл бұрын
My buddy just picked one out of the top of a garbage can. Clogged bowl.