Stripping Copper Wire & Cleaning The Table

[@karmelek1ful]

Connect these 277 shoots to 220 voltage, they should light up only a little bit dimmer

[@ProjectShopFl]

Thanks for the info.

[@karmelek1ful]

Stainless steel becomes magnetic during the machining process, especially during the forging process, which is why the heads are The screws are attracted to the magnet because they are forged by the machine.

[@ProjectShopFl]

Thanks for the info.

[@AdamW-tx]

Learn something new every day !

[@PCMcGee1]

The bench is actually The Neverending Story.

[@ProjectShopFl]

😂😂😂

[@ethanwilson1001]

Bench cleaning attempt #46

[@ProjectShopFl]

😂😂😂

[@johnsharp8627]

"A weekend scrap marathon!!!" 🎉🎉🎉

[@ProjectShopFl]

👍👍👍

[@soderhamnpojken]

loving your videos and respecting your hustle as i also scrap on my free time , and i hope you reach your goal of your own house and shop in the future. Greetings from sweden

[@ProjectShopFl]

Thank you!

[@josephvalenti5155]

18 degrees here in Connectcut now

[@ProjectShopFl]

No thanks! lol

[@williamkleinsLost40Lodge]

I seen a guy the other day pulling copper from stators his setup was super fast it was on instagram. Not sure if you seen his setup.

[@ProjectShopFl]

There are lots of ways to do it.

[@mikeyoung5211]

I've seen a dumpster with loaded generators with door locks..

[@ProjectShopFl]

Wow!

[@82ndguy5]

Replacing ribbon cable is much easier than trying to repair it. A call to the manufacturer for replacement cables might be an easy solution. Also, ribbon cables like those are always in computer towers. Check computer repair stores for them.

[@MatthewK863]

That ribbon is part of a flexible printed circuit board, the 2ish inch wide green cable is all part of the buttons/leds or whatever is on the whole front panel. So the whole panel needs opened to replace it.

[@ProjectShopFl]

Thanks for the info.

[@josephvalenti5155]

hell yeah a new video!

[@ProjectShopFl]

👍👍👍

[@gregwarne3252]

on the riben cables go to a elictrical shop get conectors for them the just cut and join

[@ProjectShopFl]

Thanks for the suggestion

[@silverlicious2086]

Nice payout. Those stainless steel plugs are interesting pickup and that huge bag of hardware and hydraulic fluid are nice scores. Hardware is getting expensive at Home Depot. Tell Steve I said congrats on selling the generator.

[@ProjectShopFl]

Thanks, I am excited to make chess pieces out of them.

[@RobertLivingstone-n4g]

Great and very interesting video all I can say is you are all ways busy great job

[@ProjectShopFl]

Thanks for watching!

[@Frosty_x.x]

Also, think about that oil filter press...it's taking up some good real estate. you pay rent for that sq ft'age. That machine is getting more and more expensive every day in ''rent''. Maybe convert it , strip it down for press parts and contorls or sell it.

[@ProjectShopFl]

Thanks for the suggestion

[@markrice3502]

great video derek thanks for sharing with us

[@ProjectShopFl]

👍👍👍

[@Frosty_x.x]

I think you need a seperate bench reserved for stockpiles. 😂😂😂 The minute that bench is clean...it's not. It's like groundhog day in PSF land.😅😅😅

[@ProjectShopFl]

😂😂😂

[@juricadivjak4422]

"Hi is mix nut" 😂😂😂😂

[@ProjectShopFl]

😂😂😂

[@OhMG]

hey Derek, if u are looking for parts for the cummins generator, try look up Onan Generator parts instead maybe you can find something when searching for model number.

[@OhMG]

oh Steve got it already ;)

[@ProjectShopFl]

Thanks for the suggestion

[@SuperRashead]

What is the fastest? Hot or cold? Hot is the fastest. You can always get a cold. 😀 Hope you are all good again! Sounds better!

[@ProjectShopFl]

Thanks! 👍

[@seancasey2444]

That was me that suggested making a roof from one of the pieces of metal.

[@ProjectShopFl]

Thanks! 👊

[@KevinHarvey-qw5mj]

Looks like you cleaned up some of the front of the building

[@ProjectShopFl]

Yes got to keep it clean.

[@sticksandstones1885]

You should take a couple days off and relax but what you really need to do is find you like a nice lady secretary to help you try to sell some of that a high dollar.Items off maybe you could just hire that part time but a little office personnel never hurts . The ribbon wire is common. Any appliance main brain bord i'm sure you're able to order it off the internet, or even amazon .

[@ProjectShopFl]

Thanks for the suggestion

[@kwojo932]

You can always try contacting selling radwell and see how much they woudl offer you for the breakers and contactors. You fill ut a spreadsheetof what you have, mail them the parts and they mail you a check(if you accept their offer). Wouldn't get enough as much as if you sold them yourself. But you wouldn't have to keep them on your shelf and deal with the selling yourself. Just a thought.

[@ProjectShopFl]

Thanks for the suggestion

[@jmonsted]

I wonder if you could break up the plastic of the breakers by "ball milling" them in the cement mixer.

[@ProjectShopFl]

Possibly

[@hagopmarkarian7452]

Does ribbon wire you buy from computer repair shops or parts store it comes in roles and very cheap

[@ProjectShopFl]

Thanks!

[@Monkey-boyo_0]

Not the bits sitting in the electrical panel lmao Steve’s ganna have a stern talkin to

[@ProjectShopFl]

😂😂😂

[@johndaley9188]

The gray ribbon cable is probably found in a PC.

[@ProjectShopFl]

I found some in my computer board pile. lol

[@johndaley9188]

@@ProjectShopFl The gray cable is standard. The connectors on the end are 2 parts. Some separate easily. Reassembly is even easier. No soldering, line it up and squeeze the 2 halves together with pliers. Had to do it once years ago.

[@silverlicious2086]

Looks like you got the "CC" turned on from the information I sent you. I tested several different languages and it's working great

[@ProjectShopFl]

Thats great.

[@DaydreamerFishing]

Lots of good and helpful comments on here. Not sure mine is as helpful but why not use the ping pong table for the top on the forklift?

[@ProjectShopFl]

Thanks for the suggestion. I have something in mind when I fix the uprights.

[@josephvalenti5155]

but random Steve found the Hatchet

[@ProjectShopFl]

😂😂😂

[@EWasteJILL]

Splice ribbon wire with similar size wire. If TOO THICK you run into resistance issues. Put Oscar on it. Old school computers use to have individual wires. 😊 I grew up watching my Dad playing around making PCs in 60s 70s. Now WAIT! WHAT DID I TYPE EARLIER!???? SCRAPE da BIG O GREEN thinggy mice ate yummy ribbon wires. And let cat Lady know her pussays are SLACKING! You're a hard worker. Keep up AWSOME WORK ETHICS! Please STOP making extra work for yourself. Moving things around....my rule is IF I HAVEN'T USED THINGS IN A YEAR GET RID OF IT! Is it for new shop? HAVE YOU SERIOUSLY LOOKED FOR BUILDING? About the 💩 battery. TOSS THE POS! YOU HAVE ME YELLING AT TV AND SCARING MY CAT! 😮😊

[@ProjectShopFl]

😂😂😂 Thanks for the suggestion

[@jayburnett9730]

If it was me, I would set aside all the electrical stuff that I would want to sell. Then get a hold of an electrician who is interested and have them come out and take a look at what you have. Maybe they can make you an offer on everything?

[@ProjectShopFl]

Thanks for the suggestion

[@charlespaschal25]

Cudos on the material for the chess set. I would use brass for the opponent pieces.

[@ProjectShopFl]

Thanks, I was thinking the same thing. 👍

[@brian56]

Someone told me that a lot of newer wire harness insulation is made with peanut oil instead of petroleum based which would explain why it seems like more and more are getting chewed on lately.

[@mikeyoung5211]

They are doing everything cheaper overseas, new auto plant less than 50 people , computers and robotics

[@ProjectShopFl]

So sad!

[@daryelljeffries7861]

Those are ribbon cables just like they use in computers. Take them off and take them to a computer repair company and they should be able to make you new ones

[@ProjectShopFl]

Thanks for the suggestion

[@daryelljeffries7861]

@ProjectShopFl it's the fastest way to get them done. But watch a couple of videos on KZbin on removing them.

[@noeljbenoitii5740]

you should be able just to buy the cable

[@ProjectShopFl]

Thanks for the suggestion

[@noneyabeeswax3200]

Now I just wrote all of this but I deleted it because I’m old. The atomic weight of copper(CU) is roughly 63.5, the atomic weight for lead (PB)=207…207/63.5=3.24… so you had a 10# bar CU x 3.24 should equate to roughly a 32.4# bar of PB,unless of course my brain has decomposed to between the z and h in Alzheimer’s and I’m completely mistaken. I like that sweet can light,I just fkn knew Steve had that hatchet you are lucky it didn’t wind up at the scrap yard. 100% you can just buy those ribbon wires maybe some dork numbers on there some computer geek shop make them. Sometime when you are in Orlando with scrap you outta go to this scrap yard I think it’s H and S,it’s by the speedway,there is a guy on YT(non-ferrous Jeff) that has a channel and videos all day I think it would be some really fun content,you are basically a star over there they would freak out if you rolled in and they pay well. It would be like on Happy Days you would be like Laverne and Shirley rolling into Al’s to make a guest appearance😂

[@ProjectShopFl]

😂😂 Thanks for the info. Next time I am in that area I will try and check them out.

[@adamstephens99]

Keep the incinerator

[@ProjectShopFl]

👍👍👍

[@brian56]

Did you ever get that other huge motor from the scrapyard?

[@experiment7752]

Hello brother how are you I hope you are well brother as you know Christmas is coming and I want to organize a thanksgiving program on this Christmas but I don't have enough money to organize the program please help us so that we can give gifts and food to the children please help as much as you want may God bless you and your children may God bless your business

[@ProjectShopFl]

Good luck I'll see what I can do.

[@christopherzweerink176]

You can put those capesidors in the dirty aluminum or shred metal .every little bit helps.

[@ProjectShopFl]

The steel yard will not take them.

[@charlesyates6687]

Batteries + rebuilts drill batteries

[@ProjectShopFl]

👍👍👍

[@jamesshingledecker3158]

All the maker and see if you can get those bands… if you can it’s worth a lot more then 2 grand….

[@ProjectShopFl]

Thanks for the suggestion

[@irishrebel1976]

Are you not signing up to get the extended warranty for your Dewalt tools? If you have problems right out of the box get them to give you a new one.

[@ProjectShopFl]

No but going forward I will.

[@johndaley9188]

Check your mailbox on Friday. HO HO HO.

[@ProjectShopFl]

Ok Thanks! 🙏

[@johndaley9188]

Almost impossible to repair ribbon cable. The cable might have a PN on it.

[@ProjectShopFl]

It has definitely been a headache

[@nicolasravegnani4889]

Get new ribbon cables. It's too hard to get it fixed and it won't hold

[@ProjectShopFl]

Thanks for the info.

[@nathanpowers3974]

Those ribbon cables are 100% replace never repair. Also you need to hire an eBay guy to sell all the fixtures and bulbs so much money being thrown out. As a reseller myself I’ve watched you scrap thousands of dollars for pennies. eBay is an easy business once you learn the nuances but you need a dedicated person to deal with the headache side of it.

[@ProjectShopFl]

Thanks for the suggestion

[@lindasmock2594]

You can probably use computer ribbing cables off old computers

[@ProjectShopFl]

Thanks!

[@christopherzweerink176]

Ribbon wire is cheep .

[@ProjectShopFl]

Thanks!

[@Kreacher1974]

If you could sell it for a couple thousand it might be worth it to have someone fix it.

[@ProjectShopFl]

I am looking to get it fixed.