Stunning Exhibition Display Boxes | Aluminum Extrusion!

[@jordanoram2162]

Great job as alsways Sir. Love the videos & the commentary

[@TheAluminumCarpenter]

Buddy Jordan! I did these edits clearly with you in mind 😀 some things we spoke, i decided to demonstrate, hope u got some more this round! Please offer your tips on where to improve😀

[@Mr.Thermistor7228]

You just sprouted a fantastic idea in my head. I am a diesel mechanic who is in need of a new toolbox. I am going to make my own toolbox, my own modular way, myself!! SCREW paying Matco., Husky, Fap-Off, etc. thousands of dollars for a toolbox!! Wow i am so stoked to plan and build this. Ive been using extrusion for years both professionally through my job and with 3d printers as a hobby so i am super comfortable using extrusion. Man im excited for this. Thank you for the idea spark!! Ill try to make a build vlog too!

[@TheAluminumCarpenter]

I am looking forward to see your creation as much as you spent time to see my creations. I am flattered to spark you an idea. Keep it coming in and keep me informed 🙂

[@Mr.Thermistor7228]

​@@TheAluminumCarpentercurrently in cad phase right now shortly will begin build and I am really excited. I really am enjoying learning certain tricks from watching all your videos. I think the most useful and important trick you showed is having plates extended up above the table so you can easily square the extrusion right on the table, that is pure genius and just shows one of the limitless capabilities of aluminum extrusion. I am of the belief that aluminum extrusion is one of the greater things mankind has created because with it you can literally build anything you think of, it has a pure limitless possibilities

[@TheAluminumCarpenter]

Well, im looking forward! Keep it coming!

[@iskons]

The amount of attention you spend on the littlest details never fail to amaze me. This seems simple at first glance, but the build process has to be appreciated. I’m always excited to see what’s more that’s coming from you(even though I still haven’t watched all your videos😅)

[@TheAluminumCarpenter]

Wow, thank you! In that case, you need to head back and watch the videos, and don't miss any, cos the next few videos should be coming pretty quickly, cos I am editing now 😅

[@patrickschardt7724]

These look great. Hidden fasteners are always fun and challenging as are closed profiles

[@TheAluminumCarpenter]

Hi Patrick! 😀😀😀Thank you ! how's things!

[@patrickschardt7724]

@@TheAluminumCarpenter hello there. Busy at work. I should start integrating our logo into our builds as well as our color scheme for t-slot cover. I’m making a huge a green house and many workstations as well as smaller projects

[@asage5801]

Informative, tutorial and clear. Your meticulousness is inspiring. I have dreams of offering custom household items built of extrusions to give them an industrial look…

[@TheAluminumCarpenter]

You can do it! Best of luck!

[@joepbananestaki3555]

I have many videos viewed, but this project and your creativity inspires me huge, for my future developments and projects. Thank you already, and up to part 4. Well done and keep it up.

[@infiniteoffset]

To be honest I don't like the holes in the corner profile. If I imagine those stands at the expo 9:50 with the holes from the end of the video, I think that would bring the aesthetics significantly down. Maybe only if you could 3D print some gray plugs, that might make it better. Also I don't like the screws that attach top acrylic. Some black countersunk screws would be better, but I do understand that would probably crack the acrylic. But anyway, these are just details. You did a great job with this project!

[@TheAluminumCarpenter]

Agreed. Any day, i will agree with u. But how….

[@sjzhaobin]

The things you make are really meticulous. I am also making simple aluminum shelves and so on. Many of the skills are learned from you. You are really great.

[@TheAluminumCarpenter]

Thank you very much! I am happy to hear that! Pls show me what you built 😀

[@sjzhaobin]

@@TheAluminumCarpenter I can only assemble some shelves with simple structures, and small birch boards with aluminum cabinets and the like.

[@TheAluminumCarpenter]

I have quite a few/many projects in line. Some are already done, pending video launches, some are mid-way, some are under material-ordering stage, some are still in my head 😀, hope i kept u interested to stay on and watch!

[@toma.cnc1]

Awesome, as always. Thank you.

[@TheAluminumCarpenter]

Thanks Buddy Toma. Hope you can point out any pointers to improve 😀

[@samiadel7043]

Perfect sir 🎉❤🎉

[@TheAluminumCarpenter]

Cant be 🙂 which part is the perfect part?

[@ed-ey1yb]

Inspirational work, thank you for sharing! Since the acrylic is opaque I would have just dremel'd out a notch on the bottom where the fastener stuck out. Also, would recommend going much slower when drilling aluminum so that you get longer shavings (swarf). This is easy with a sharp steel bit in aluminum, and will make your bits last longer and your holes cleaner!

[@TheAluminumCarpenter]

Thanks for all the info! 😀 and thanks for watching!

[@EricHartwigExcelConsulting]

This is awesome! Really great work! Are you taking new client work right now?

[@TheAluminumCarpenter]

Yup we do 😊

[@EricHartwigExcelConsulting]

@@TheAluminumCarpenter I sent you an email using your Contact Us section on your website.

[@andymagahy1421]

Using a die grinder make a slit in the top of the thread insert, then you can use a flat head screw driver to wind in the insert.

[@TheAluminumCarpenter]

Will this be too much work?

[@otrdavid6632]

Very nice had a thought on installing the thread inserts. Get a longer bolt And nut. put the nut on the bolt and thread the reducer on. Tighten the nut down to the reducer which will lock it in place and you should be able to run it in. Hold the longer bolt us a wrench to back off the nut. no pushing and forcing it. add a large washer in front of the nut you used for locking insert and you know it is completely flush. I don’t know just a thought but would take an extra few min. Good job looks impressive.

[@TheAluminumCarpenter]

Hey thanks for helping me think 😀 that is another great idea!

[@rudeboy1127]

Simple solution is to us clamps to hold those fasteners in place as you tighten them… nice work btw

[@TheAluminumCarpenter]

That's a good idea!

[@anthonyg9787]

Love 8020 work... work on a refrigerator mount for rv

[@TheAluminumCarpenter]

Sure, but i dont have an RV :)

[@h82fail]

LOL that is my current project. Not for RV, but I need to make a rack for the back of the vehicle to mount heavy duty slides for a big cooler style 12v fridge (overlanding type setup). Wanted to use extrusions because easy to build other things onto (batteries for it, maybe portable solar panel holder etc) and hoping for light and easy to remove or partial disassemble when not needed.

[@TheAluminumCarpenter]

Wow! Good luck on your build!

[@b1ooberry]

What is the joinery piece you used at 1:08 called, or would you mind providing a link for it?

[@TheAluminumCarpenter]

i added the link to the video description. Cheers...

[@googooboyy]

These are amazing crafts! And that the client is spending them just to showcase their cameras? It's "boomz" to brain it, but really nice outcome! Also, didn't realise TAC is from SG! Sup~

[@TheAluminumCarpenter]

Thanks for the kindest words!

[@jacoboliver1129]

Do you get all of your pieces precut or do you cut them to length yourself?

[@TheAluminumCarpenter]

For this video’s, pre-cut.

[@g3force782]

Do you know where can we buy the cheapest 4040 aluminum profiles (custom length) in Singapore?

[@TheAluminumCarpenter]

have you searched up our carousell?

[@mr.chindo8570]

Great Job! is it possible to send the cad file?

[@TheAluminumCarpenter]

Im sorry. We didnt do cad files for this model. Did u visit our website to see what we have yet?

[@knight907]

Where did you get the rail inserts that held the panels?

[@TheAluminumCarpenter]

From my range of suppliers. Is it urgent? If its not, I’ll help you with it.

[@knight907]

@@TheAluminumCarpenter Not urgent. I am only looking at options right now. Those inserts look very useful. 👍

[@mrjwf007]

Can you get the inserts in the UK im looking and looking and well looking some more 😂

[@ronanfernandes2556]

Nice job! What is the thickness of the aluminum panel?

[@TheAluminumCarpenter]

There are no aluminum panels in this build. Are u referring to the acrylic panels?

[@carteiraricaeducacaoeinter3882]

@@TheAluminumCarpenter sorry... i would say acrylic..

[@TheAluminumCarpenter]

4 & 6mm respectively 😀

[@SkashTheKitsune]

hmm, would be even better if you didn't use TTS

[@TheAluminumCarpenter]

I think so too.

[@mjremy2605]

You have THE BEST aluminum extrusion build videos on Utube. However, adding music is so tiresome to the viewer. My ears hurt seconds into the video. If I turn off sound, I miss a great deal in voice instructions. Reading text takes twice as long. The point is that no DIY, DEMO, TOUR, WILDLIFE, OR COOKING VIDEO SHOULD EVER HAVE MUSIC. NO MUSIC PLEASE!!!!! IT IS SO INFURIATING, AND A HUGE TURN OFF. IT HURTS MY EARS TO WATCH YOUR VIDEOS. IS THIS THE VIEWER EXPERIENCE YOU ARE AIMING FOR? INSTEAD OF BEING SOOTHING, IT IS STRESSFUL AND MAKES ME ANGRY.

[@TheAluminumCarpenter]

Thanks for pointing it out.

[@lostinseale]

I do not care for the whole. The first way was better.

[@TheAluminumCarpenter]

Thanks!

[@57z]

so many clever ideas. really think out side the box, while making beautiful boxes. very inspiring... Edit. Could you not get an extra long hex ball driver? that way the mount will sit more flush as you tighten it. google "Large size Extra Long (10.5" blade) Ball Drivers by RTL Fasteners"

[@TheAluminumCarpenter]

Thanks 😀 pls wait for all the videos im preparing. There are so many new methods not shown yet 😀