styrofoam RC airplane MODS | homemade low cost project

[@mr.fredricklawngtawnghedav5094]

You good at building improvising components.

[@neail5466]

Very helpful stats ... Thankyou...for my 1st build i was knocked down by the cg .....due to the longer tail...and yes i know the frustration of failure but its also the honey of chasing success 👍👍

[@Rando104854]

Awesome! Maybe a micro indoor/outdoor plane next?

[@Joyplanes]

I already did that in this video kzbin.info/www/bejne/nam2qWyGqMt4fqM&t

[@daviddavids2884]

thanks for posting. some thoughts. at 5:33, the proportions of the model are wonky. the span of the horizontal stabilizer should be 30 percent of the span of the main wing. the distance between the elevator and the main wing is going to result in extreme response to elevator input. if desired, certain mods would be appropriate. unfortunately, the length of the existing fuselage does NOT allow the correct location of the elevator. the elevator should be about three inches farther aft. if the fuselage is extended, the span of the main wing should be reduced by, perhaps, ten inches. at 7:01, the prop is about three inches forward of where it should be. on a small model, and most models ARE small regardless of the wingspan, AVOID adding weight aft of the cg; mount servos NEAR the cg. in order to increase overall stability, mount the battery LOW in the fuselage. cheers

[@Joyplanes]

Great observations!

[@jalalhaider83]

Kindly show us how to make a dihedral wing from styrofoam step by step, I can make a Clark y airfoail, but when it comes to dihedral I get cut wrong, even if I bevel cut it can't get joint right, either at top or rare if joint

[@yerontulu9269]

What motor, battery and ESC should I use?

[@Joyplanes]

I recommend the motors and ESC listed in the description and a 3S battery of about 1000 mAh

[@yerontulu9269]

@@Joyplanes thank you very much appreciated.

[@Joyplanes]

Cheers!

[@ВалерийЯкушин-ъ3й]

Молодец! Me gustaron tus modelos. Los videos se ven bien.

[@JoshsRC]

Hi, wich microphone are you using, for your commentary?

[@Joyplanes]

I'm using a zoom H1 but no matter what microphone you use, is the process afterwards like audio compression and EQ, I do filmmaking for a living and thats why my videos has this quality.

[@JoshsRC]

thanks! :D

[@arifulhaqueanna8769]

I have an 2600kv brushless outrunner motor ans 30A Esc. I m confused which battery I should use and the propeller size. would you just help me out in a short description??

[@Joyplanes]

I think that motor should be capable of a 4S battery but you can get a small one like a 850mah or a 3S of the same capacity, also a small prop a 5040 will do

[@arifulhaqueanna8769]

Joyplanes can I use 1800mah 3s???

[@Joyplanes]

that will be a little heavy for the size of this build, so you can use it but build a slightly larger plane.

[@arifulhaqueanna8769]

Joyplanes thank you so much

[@Yelnats101]

update links please,, thank you

[@lurkingcorsa10]

++Joyplanes - how much is your battery weight, bro..? once more.. ur video is not something usual.. bro(y)!

[@Joyplanes]

I used several batteries, not sure of the actual weight but I used a 3S battery 800 mAh and was light enough for this project.

[@lurkingcorsa10]

800 mah, how much the loads ? is it light enough f0r 3S 1600 or 1800 mah (18650 battery) on this plane..?

[@Joyplanes]

a 1600 mAh battery is going to be a bit heavy for this plane unless you get a bigger motor, and bigger wigs.

[@lurkingcorsa10]

as big as wht for the wings? but my motor is 1000kv.. once more.. is it good idea to build 3S battery power from 18650 battry ..? thnks bro

[@Trashbag-Sounds]

Wow that’s a lot of hard dubstep 😅😅

[@OmkarSheral]

music too loud

[@Joyplanes]

Sorry

[@jimmytiler5522]

Im sorry that is one ugly plane I mean did you try to ugly it?The music,pleaseeeeeeeeeeee