Daystate Delta Wolf full disassembly

[@Tim_Bassett]

I know DS are late to the tacticool party, but the more I see it the more it grows on me - especially now it has a stock. Another clear video which I am sure will help loads of people.

[@sub12airgunners]

Cheers Tim, definitely a little late but still interesting none the less, some interesting and unique quirks to it, interesting to say the least. Thanks for watching.

[@bigchad2374]

3 months ago I wouldn't have touched one of these with a barge pole, after seeing the videos my interest is definitely peaked 👍

[@sub12airgunners]

Same with us to be honest, 2 years ago we wanted nothing to do with the electronic rifles, we saw them as gimmicks but after playing with one and seeing how they work, they can be fantastic rifles, the Red wolf was a eye opener and the delta wolf is much the same, hopefully Daystate has sorted them out now and they will have many years of life, time will tell though. Thanks for watching.

[@matthewyates1719]

I would love it if u could do a steyr pro x tear down and power adjustment video.No videos on youtube anywere. ur videos are always so clear and packed with tips and good advise.

[@salahbahzad5512]

Cannot express enough how amazing was that video, my question is , do you see any area for improvement /increasing power specially for FAC version. I see that the valve port is almost max in size. What do you think??

[@sub12airgunners]

Thanks much appreciated, definitely maxed out the port size, only ways I could see a small increase in power, shortening the hammer a bit that way you get more stroke, and maybe increasing the internal valve diameter, there is a balance to be had there though as well, as too large and you make the hammers job harder by increasing the closing force on the back of the valve, but I think as standard the delta wolf is capable of 95+ lb/ft so defiantly no slacker, and finally you could always put a longer barrel on it, the standard is only 600mm so a 800mm would give you a lot more power. Thanks for watching.

[@TonyBelas]

Great video, you make it look very easy, especially as you have had to work it all out yourself!

[@sub12airgunners]

Cheers Tony, a few tricky parts but it all came apart very easily, the sign of a good design. very impressed with the circuit board, nice bit of kit. Thanks for watching.

[@Sae-fu5ch]

what a great video guys really really nicely done and presented well👍 There’s a lot going on there isn’t there and I’m sure a lot of people are surprised and shocked with the amount of detail and layout of everything (I was) seems a very well designed and put together rifle doesn’t it! You boys take it apart with such ease it’s mad well done guys and look forward to the reassembly video 👍 can you see anywhere that you can improve anything guys?? polishing/delrin/ptfe bits? 😁 Thanks for sharing guys and for being my favourite KZbin channel.

[@sub12airgunners]

Cheers mate, no polishing at the moment, we are looking at a few areas of improvement, but at the moment we are still in the planning stage. Thanks for watching.

[@SorenDrost]

Awesome run-through and disassembly of the Delta Wolf, Geoff 👍🙂 Amazing to watch for sure ! Love my DW .177 HP 😎😍

[@sub12airgunners]

Its growing on us to be honest, the more you play with it the more you like it. Thanks for watching.

[@andydowden8117]

You got loads of bottle to dismantle that delta wolf I was squirming with every piece you took off .. 😱

[@sub12airgunners]

Thanks, to be honest once you get over the electronics, its really no different to another rifle, one piece at a time and it comes apart nicely. Thanks for watching.

[@carlmatera332]

Very interesting video, even if one never plans to undertake the disassembly themself. Great video as usual!

[@sub12airgunners]

Cheers, much appreciated glad you enjoyed.

[@carlmatera332]

@@sub12airgunners I can't wait for the re-assembly!

[@lisawood516]

Great strip down and Nice clear run down of the parts. Love it!!

[@sub12airgunners]

Thanks, glad you enjoyed. Thanks for watching.

[@ShartedKegs]

You make it look so simple 😅 any tips for getting the reg/bottle pressure gauges align with the text upwards?

[@sub12airgunners]

we make little Derin spacers up and sometimes turn a little off the back of the gauge 👍

[@vincehogg8935]

Really interesting and helpful. Thanks. I have just bought one in .22 FAC. The barrel fowls very bad, very quick, like 100 shots perhaps. Never had a brand new gun before so perhaps it will wear in. Also first shot after say 30 minutes rest is always about 100 ft/sec slow. Reg showing at set pressure-no creep. any ideas?

[@Donny_Juanny]

So this could basically be the same for the Alpha Wolf as well, correct?

[@sub12airgunners]

yes alpha and delta are the same gun except for the stock 👍

[@YuZi_Market]

hope you can publish a brocock ghost disassembly video

[@gallantone1535]

Daystate should pay you you know your engineering 👍

[@sub12airgunners]

Thanks much appreciated, Thanks for watching.

[@Premierslugs]

Just bought a sub 12 177 Deltawolf as a bit of a project ,the whole gun had been painted, that has now gone the gun is very accurate one thing I don’t like is the hammer noise , is there anyway of stopping or reducing it ?

[@PaulHamM3]

Great video, i really like the way you carefully disassemble the rifle and i like how you show us how to take apart the chrono..unlike the chap in the airguns of arizona video! That made me wince!

[@sub12airgunners]

I have seen it, they are only small wires and puling/ yanking on a thin circuit board is not the thing to do, but slow and careful is the way to go. Thanks for watching.

[@markgilbert7012]

Do like that sliding rail idea 💡 👍

[@sub12airgunners]

Some really nice features on the delta wolf, I like the sliding rail, really handy little inclusion. Thanks for watching.

[@studssmith2008]

Best Daystate video by far , we’ll done that man 👍

[@sub12airgunners]

Thanks much appreciated.

[@bashm5767]

👍🏼well explained and informative video guys👍🏼

[@rudymsmith]

outstanding video

[@sub12airgunners]

thanks for watching 👍

[@HeshamALAhdal]

You are amazing !!! thank you so much for this informative video

[@1001space]

is that value pin tool going to be available on eBay .? great video

[@__all_in_one]

Good job

[@EdBraunbeck]

I'm converting DW to 177 using a Ghost barrel. Do you think the chronograph could be installed on a Ghost barrel?

[@chrisfigueroa3361]

Awesome that is a lot of wiring in a air gun no for me thanks for sharing bsafe buddy great job 👏

[@sub12airgunners]

You will come around, we did, it just takes time and careful introduction. Thanks for watching.

[@antomarkic7190]

Big tnx!It is not clear to me why they do not have a balanced valve and have a precision solenoid hammer?!So with much less force the valve would open, and the electronics would consume less power, so everything would be simpler...

[@sub12airgunners]

Balance valves are rare in the air gun world at the moment, not sure why but I do agree a balance valve would be a nice inclusion. too be honest I know very little on electronics, so I don't know about the solenoid hammer, although I can see how it would work. Thanks for watching.

[@antomarkic7190]

@@sub12airgunnersMy comment was gone here, sorry!

[@HeshamALAhdal]

Hi, How many shots in order to empty plenum chamber ? is it like fx impact only 3-4 shots to discharge plenum? or you need far more shots?

[@sub12airgunners]

normally just 2 / 3 shots will do it sometimes it takes a few more

[@TurkishTinkerer]

Brilliant mate !

[@sub12airgunners]

Cheers, Thanks for watching.

[@jeffhello1444]

nice one 😀

[@raulplascencia5038]

Buen dia amigo disculpa tengo una pregunta para ti mi rifle tiene fuga de aire en un ollo q esta por un lado del reloj me podrias decir cual es el prpblema?

[@ross4235]

🤯🤯🤯

[@sub12airgunners]

Thanks for watching,

[@Juniantobaka1]

Mantap bang

[@sub12airgunners]

Thanks for watching

[@Original_field]

Ini yang aku cari, terimakasih

[@sub12airgunners]

Glad to help, Thanks for watching.

[@zan6169]

Приветствую. Всех благ

[@sub12airgunners]

Cheers, thanks for watching.

[@jeffhello1444]

😁

[@sub12airgunners]

Thanks for watching

[@Donny_Juanny]

Is there anyone or a company that will sell and ship o ring kits for the delta/alpha to the United States? Daystate's site does not give that option. Or... anyone have a schematic that provides o ring sizes like FX generously does. Not sure why Daystate wants to be so damn secretive. Frustrating to spend 3500 on a rifle and not get any parts info.

[@jamessteam7504]

I love you 😘😘😘

[@sub12airgunners]

Cheers, much appreciated. Thanks for watching.

[@dgg7377]

First viewer! Must do some work........rather than watching You Tube!

[@sub12airgunners]

KZbin is more fun though. Thanks for watching.

[@sonan7216]

Vaya cacao

[@Cainmoa]

you are a legend Thank you for sharing these videos with us If you had a chance show us video of brocock bantam sniper She has no video in youtube Thanks man ❤️‍🔥🫡

[@sub12airgunners]

Thanks much appreciated, glad you enjoy the vids, I will add it to the list, Thanks for watching