subaru forester front axle replacement step by step

[@alimartinez5795]

thank you for this video 👍🏽

[@Autoenginecheck]

Thanks

[@robclinton9249]

Match mark. Scribe or use paint marker on 19mm upper strut to knuckle bolt. It is a cam bolt for alignment. Put it back in with marks aligned/cam back in exact orientation it was in.

[@Autoenginecheck]

Thanks sir

[@robclinton9249]

You don't need to separate the tie rod end for that job. Take the 14mm bolt that holds steering knuckle to lower ball joint and two 19mm that hold strut to knuckle out. Unplug ABS wire from strut and inner fender 12mm bolt. Unbolt brake line clamp 12mm from strut. Plenty of slack and room to get axle out. Support rotor, hub & knuckle with jack or wood blocks.

[@Autoenginecheck]

Thanks sir