Sublimation Coating: Can You Coat Regular Mugs and Shirts?

[@jenifercrandell4618]

When you have scorching from the heat press, doing sublimation, you can lightly spray the scorched area with hydrogen peroxide and it should take the brown marks away.

[@AngieHolden]

Yes I do that in other videos however I am looking for a coating that does not require those steps.

[@Schmeela]

did that work?​@@AngieHolden

[@djarelljones8599]

This IS ONE OF THE FEW INSTRUCTIONAL VIDEOS, I WATCH IN ITS ENTIRETY. Great presentation and honesty in your video. Good luck, look forward to more videos.

[@sheryldenise4478]

Angie, thank you SO MUCH for testing these products for us. You save us SO MUCH: money, time and disappointment! You are awesome!!

[@AngieHolden]

Happy to help!

[@Reneesfun]

OMG! Hope I don’t seem like too much of a geek but I’m so stoked over the past few videos that you’ve posted! It’s all the sublimation information that I’ve been looking for. Thanks 😊!

[@AngieHolden]

Wow, thank you!

[@MrsMonzel]

🤣 same! Seems like I been up for 48 hours watching her!!!

[@KristiCorbett]

The PolyCoats are really for specific projects and takes a lot more time. It is worth sticking to professional sublimation blanks. Did want to mention - tape upper parts of mugs where mouths will be if someone will be drinking from the mug. Also, use a very fine sand paper over the mug after the coating has dried and this will make it smooth. I’ve also seen pros lightly sand mugs before putting on the poly coating as they say it helps. For shirts, if you wet the edges (with water before pressing) where you sprayed the poly , but are not sublimating it helps to not get the darkened area. You can also lightly spray brown areas with peroxide/water right after, leave for a bit, and then rinse. Love your channel! Thanks for keeping us inspired!

[@andrewwilliams2193]

Thanks for this video. I bought a sublimation spray in the summer, but since I didn't have a sublimation printer with sublimation ink or the sublimation paper at the time. I couldn't try it. Once I got the sublimation paper, I tried to do it with regular inkjet ink on a cotton T-shirt and of course, because it was not sublimation ink, it didn't work. The T-shirt I tried it on was a Royal Blue Gildan Heavy cotton shirt, so I didn't notice any discolouration from it. I ended up using dark fabric inkjet transfer sheet and did the design on my shirt. Now that I have all the right materials I will give the spray with a cotton T-shirt to see if it comes out good or not. The spray I got was from Amazon and it just say Sublimation transfer coating for use on cotton and canvas material. I'll let you know how that turns out. But as far as sublimation goes, I will stick to the proper sublimation blanks and T-shirts.

[@lexiwexiwoo]

On the sublimation spray for fabrics, I used it on 100% cotton towels & washed them with just baking soda in the washer & tumble dried like normal and it came off no issues. I used the same product as well as a different company's spray which is similar.

[@LizCline]

Thank you for this! I've wanted to try coating my own mugs, now I'm glad I didn't waste my money.

[@HVACRTECH-83]

There's other products like subliglaze that work great

[@TheCarus]

Angie, you are so awesome to test this stuff out for us. Thank you, thank you, thank you!! I'm bummed that it didn't work out but you saved me a fortune in investing in these myself.

[@papamrk1343]

As soon as you started Mixing... I just decided to bite the bullet and BUY SUBLIMATION MUGS... Especially as a business... With that warning about not applying where body contacted would be... Dont need lawsuits. Thanks for this info... always looking for easier, faster and CHEAPER... Thanks again...BEST VIDEOS EVER!!

[@AngieHolden]

I definitely agree!

[@kathyhart5105]

I’m glad I found this channel, I don’t think this will be something I will be doing any time soon. Thank you for sharing.

[@AngieHolden]

You are so welcome!

[@patlavender9092]

Angie, thanks for the instructional video. I purchased the Ngoodiez sub coating for mugs. It did not come with instructions. I found your video thinking it would tell me how to use it. However, what it did shows me is that this is a product I really don't want to even fool with at all. So, it's going back to Amazon and I will purchase mugs already set up for sublimation. Thanks for passing on your expertise.

[@AngieHolden]

Glad it was helpful!

[@rebeccareames9132]

I'm wondering if washing the shirt afterwards would remove the yellowing? Also what does it look like after 5 washes? I'm disappointed in the Memory Makers spray, they are a well known and reliable source for a lot of crafting supplies and I would have expected much better results. I've enjoyed your videos so much (and even though I'm a Silhouette owner by preference, at the time I first started you could not use Cricut without the internet, so now I have a Cameo 4 and a Portrait ) I find so much information that crosses manufacturers and so many creative ideas that I can't resist every video you make, they're terrific! Just a quick rating on your Sublimation Journal, I haven't found places to put many of the pieces of information is like to keep track of, mainly a place to print a page with a photo of the project design, the type and brand of substrate used, where I bought it, fabric or substrate composition, pressing heat and times and any other notes on how it came out, and if my client and I are pleased with the results. I love having the ability to keep those notes other places but I'd like to get a better idea of how I created those projects. I turn 75 in 2 days and crafting, mainly sublimation, has become my favorite thing in life. I've decided out try a and follow your footsteps so I'm creating a crafting project page of my own. I'm a share by nature so if you don't mind if like to send it to you for review and for you to use if you find it helpful. I'm looking forward to your 3 day Camp and you and all your genius friends giving so much encouragement to the rest of us! Thanks again for all your ideas and all your work.

[@AngieHolden]

I was disappointed with this as well! And happy to look at anything you want to email me! Always open to better ideas!

[@mrsdizi1234]

Just Love your honest opinion and for doing the tests for us, That why we are subscribers.

[@destinyhill7004]

I used the same spray on a shirt and once I washed it, the yellow went away and it worked great for my cotton shirt.

[@Schmeela]

Good to know. Thx.

[@Dragonsbrath]

Excellent video. You probably saved a lot of people some money buying disappointing products. You rock as always.

[@AngieHolden]

Thank you! Cheers!

[@billiedixon5385]

Thank you for this video. I was wondering how these products would work. You definitely answered my question. I truly appreciate your videos. Thanks for being you.

[@AngieHolden]

You are so welcome!

[@thetattooedunicornmom1560]

Not sure about these, but the Subli-T spray is amazing and works wonders. Also, the little bit of yellowing can be fixed by a quick spray of peroxide. You can sublimate in cotton and it will look great until you wash it. Because the ink has nothing to bond with, it will wash out. Otherwise, the spray I use works great, those cheap brands are terrible.

[@dianesloey8265]

I think she sprayed too much on the shirt because I spray with homemade Poly t and I have great results and sell them at my daughter's pro shop with no yellowing

[@Schmeela]

​@@dianesloey8265is that with polycrylic by chance? Do you have a recipe? Lol

[@teresareading3536]

Love your very informative videos! Appreciate all the work you put into testing the various products. Thank you!

[@AngieHolden]

You are so welcome!

[@maryjanewill3056]

Like to see wash test on the shirt, and the mug wrap.

[@AngieHolden]

I will be doing more tests with products made with the mug wrap in the oven so stay tuned. I will be testing some more coatings and options for shirts and when I find out that I like, I will do wash tests!

[@karenturner5443]

I saw where someone showed you can spray peroxide over it and it will remove the yellowing. Haven't tried it.

[@AngieHolden]

I have had some people suggest that but it doesn't seem like the best solution to me.

[@artofsymbiosis5615]

Thank you for saving us all the time and frustration! You are the best!!

[@kimdad8831]

Don't know if anyone mentioned bug here in the UK the wrmk is advertised more as a fabric coating. Thanks for your kind time x

[@AngieHolden]

It came with a kit with a mug here.

[@kimdad8831]

@@AngieHolden the mug is already sublimation ready xx

[@AngieHolden]

The kit I had it was not. However, the kit in this video is older as it was purchased way before I filmed this video.

[@kimdad8831]

@@AngieHolden that's really useful to know as I actually plan to use my cup soon it's been it's been in a top cupboard (I'm disabled 😀) It's funny cos it isn't clear in my sets instructions about the cup I Was going off the company's advertising so at Least I will know my issue as I'm trying out a new a all new set up. Thank you for not only taking the time to do this but also replying I really appreciate how hard and busy life is x

[@purpleflower1828]

thank you so much for experimenting with these products, I was looking into trying this coating process but I will continue to use my sublimation blank mugs. Thanks!!! 😀

[@AngieHolden]

You are so welcome!

[@bizarrequilter]

Thank you for sharing this. I was hoping to coat my own, won't bother

[@carlatownsend9647]

This video was timed to perfection lol. I had been looking at sublimation sprays but have definitely got some food for thought now.

[@AngieHolden]

Great to hear!

[@fatisummer9106]

you should try sublimation spray for your self at least cotton clothes ,but not like she did ,she did it the wrong way,dont put so much,one spray for one spot no more than that then wear your gloves and spread it even,lastly let it dry ,also choose a good brand ,I been use sprays for so long never had a problem

[@freyascorner11098]

Instructions do say if you oversaturate the shirt, for the spray on fabric, it will turn yellow. Will be trying on a cotton sweater. Gonna give it a go.

[@tegancheney1627]

Btw I love all your videos... thank you for testing things for us, because you've saved me so much money from being wasted

[@AngieHolden]

You are so welcome!

[@pattibaileydesigns]

Angie, once again another terrific video!!! Question on the WRMK mug wrap. Did you like using that? I find that fascinating!!! Do any of your previous videos show how to use that from start to finish (oven temp, time in oven, etc). I've never seen that wrap before. Thanks!

[@AngieHolden]

I am going to do a video with it I think here in a few weeks and see how it does with consistency.

[@dianecurtis3823]

@@AngieHolden on that note, I just purchased the WRMK kit on HSN. But now afraid to use it because everyone said it smells horrible when placed in the oven. Did you experience the smell? using a sublimation mug blank.

[@LorraineCastellon-Rowe]

Great comparison. Don't like any of the diy sublimation coatings. Will stick with the original sublimation products. Thank you Angie. 💐💐💐

[@AngieHolden]

Thanks for watching!

[@jrhodes3216]

Wow! I was about to try some of this stuff... So glad I came to check with you first!! 🧐

[@paulsloan4725]

Thanks, Angie well done, well presented.

[@AngieHolden]

Glad it was helpful!

[@Diana-sr5ub]

I would recommend that you use a sponge to very gently spread spay on your shirt and in the process of doing that it help to remove excess from your shirt. When brushing cups put your hand down in mug with your gloves on it makes it easier to move your cup around and not get your fingers away. Questions for you , did you use a paper protection for your heat wrap for cups to keep in from bleeding ink onto the wrap and did you try washing shirts to see what happens to them (like the yellowing disappears?)?Thanks for your video it was helpful and informative. I have tried the 2 tbsp of minwax water based polycrylic to 8oz of water in spray bottle. It didn’t yellow and I was able to sublimate to the cotton shirt. I also have washed the shirt (so far 3 times) and the sublimation is still there but I feel as if it has dulled a little.Again thanks for the video I really enjoyed it.

[@AngieHolden]

If I use a reusable wrap, I usually add some paper. I didn't try washing them as I don't think someone that was making shirts to sell would want to do that. I haven't tried any other solutions as I was pretty discouraged by these!

[@Theresa914]

I’m glad you mentioned the polycrylic. I have a metal (2”X4”) piece I got from dollar tree. I have used mod podge to apply glow in the dark powder. Going to use the Varathane ultimate polyurethane to coat it and try to sublimate. Maybe it will work if yours did.

[@knitkniter]

Interesting video. The WRMK wrap seemed to work well with the sublimation blank. I recently bought the set at a greatly reduced price so if everything works except the coating, I'm OK with that. I'm hoping the wraps will work on tumblers also.

[@AngieHolden]

I actually didn't like the wraps as they stretched and did not last very long.

[@chrome98]

I've used Slansval brand with great success on wood, leather & stainless.

[@craftpaintcreate2328]

I saw the WRMK kit on HSN and when I asked about the transfer coating, I was told that it was only for use on cotton fabric, and not on hard surfaces like mugs. Do the written instructions say something different? I wasn’t convinced that the coating would be any good, but I ordered the kit anyway because I wanted to try the transfer pens and the price was right! Thank you for an excellent video!

[@AngieHolden]

That is the kit I am using! It came with a mug to put the coating on and directions to do so?

[@craftpaintcreate2328]

@@AngieHolden Wow! That's not what they told me! I was told that the mug in the kit is already a sublimation blank, so there was no need to put any coating on it, and that the coating in the little bottle is only for cotton fabric items. I ordered 3 of the kits because they were on such a great sale, so I'll try pressing one of the mugs without adding any of the coating, and I'll let you know what happens. I hate it when there are conflicting instructions!!! I mainly ordered the kits for the transfer pens and because I wanted to try the coating stuff on a cotton tote to see if it would work. I was also curious about the silicone wraps. I already have a regular mug press, but if the wraps are easy to use, they would be more convenient than having to drag out the press every time I want to make a few mugs!

[@AngieHolden]

I bought mine a LONG time ago. Wondering if they had failures and changed the kit. That makes me angry!

[@mkayweber3739]

Love the test and the information. Will be trying more of them? I know people seem to like Dyepress poly T plus for fabric and Dyepress polygloss. I even heard people using polycrylic not only on hard surfaces but mix it to use on fabric. Have you heard of it or tried it? Thanks for the video!

[@AngieHolden]

Definitely will try more in another video. I thought I would put this up and get some suggestions!

[@katieb3358]

I bought some dyepress poly T, it's still in the box...scared to try it. They sent a free small sample of gloss with my order. I also ordered their matte for wood, that's really what I want to try. But still...all of it is still in the box with FEAR written all over it, which is kind of surprising, I'm usually willing to jump right in LOL.

[@mkayweber3739]

@@katieb3358 I want to try it too

[@tegancheney1627]

Im also wondering if the sublimation coating would go on coloured mugs like black, red etc..

[@pepamonrabal2787]

👍

[@VG-cr5nx]

Great information and it saves us from product disappointments! Thank you!

[@AngieHolden]

Thanks for watching!

[@DavenportDecals]

Very helpful. I've tried another brand of poly spray for cotton and it was pretty good--but not 100%. So I'm not a fan of polyester shirts. Do you have a recommendation for poly shirts that are thicker and feel/look more like cotton? THanks.

[@AngieHolden]

Yes! Gildan makes a poly shirt and Artesprix has a good one. I have some recommendations in this video: kzbin.info/www/bejne/gWS9equlfN9sqNE

[@TheMcKenzieFamily.]

Thank you! Made my life so much better! I was debating on getting those exact stuff! I will pass on it. And just spend the extra money on the sublimation products

[@AngieHolden]

Glad I could help!

[@deshantebraggs332]

@@AngieHolden so im confused now... so you don't need any solution for 100% cotton???

[@j.c.7555]

Great video and very informative! Thank you for doing these tests as I was wondering...now I know!💕

[@AngieHolden]

You are so welcome!

[@beachlifesoy2253]

parchment paper vs butcher paper for heat press shirts and mug press mugs? tia :)

[@AngieHolden]

I like butcher paper better. Parchment paper holds moisture in when you want something that allows it to go through.

[@ONEpocketKID21]

Wow, thanks for saving me money on these products!

[@kileylogue6384]

Did you wash the shirt to see if the yellowing would go away? Reason I ask is because I have actually pressed to long and had a very yellow-burnt color on a blank Cricut brand shirt and almost tossed it/ But I kept it and washed it to use for experimenting with different colors of Infusible Ink from Cricut ~because sometimes for me at least, I don't exactly know what that color is gonna look like on an actual shirt or if you can even see it at all~am I right crafters?~ Low and behold the yelowwish-butnt color came out and the shirt was amazing!!! Just something to think about trying, I know its not the spray you used on a cotton shirt but hey we all do laundry, so why not give it a toss in the washer before hje trash, not wasting anything this away. My 12 a.m. though for the new day As Always Kiley The Rusty Spur

[@AngieHolden]

I didn't. I feel like if people are using this for items to sell, they wouldn't want to have to wash them?

[@cherylwood1454]

Wow! Thank you for doing this video. I'll stick to the sublimation mugs.

[@AngieHolden]

Me too actually! HA!

[@karensmith5510]

Nice video. After putting a image or test on a mug, is it dishwasher safe.

[@AngieHolden]

I am not sure with these products as I haven't tested them.

[@lucymar122512]

Hello I wanted to know if I can use sublimation paper with my hp jet 5505 printer and then use sublimation blanks I really don’t want to buy another printer but I would like to try this if you can help me do this on your video. thank you love your videos.

[@AngieHolden]

You also have to have sublimation ink. Try this: kzbin.info/www/bejne/gorNYamJbtGCntU

[@nekonette]

Your HP printer won't be compatible with sublimation ink. You will need either an actual sublimation printer or convert an Epson inkjet printer (don't use the inkjet inks that come with the printer). HP/Canon don't work with sublimation inks unfortunately.

[@hoopman732]

What about stainless steel water jug. No yellowing would happen ?

[@AngieHolden]

I am not sure.

[@Shelly35able]

I wish I would’ve seen this video earlier lol. I just bought the spray for fabrics

[@calasiter]

Thanks for your videos. I've seen other videos that talk about the yellowing being gone after washing. Let us know when you wash that shirt. Also, I read in the comments about someone having success with Poly T Plus and Gloss for shirts and mugs. Will check in again to see if you try those. I looked for that product at Hobby Lobby and didn't see it. (Poly T Plus.). Thanks again! Excellent videos.

[@AngieHolden]

I am going to try a few more but I still don't like it yellowing after I press!

[@candyluv6972]

@@AngieHolden have you tried anymore yet like Polygloss from Dyepress?

[@kaniri48]

Thank you for the info!!! It's so helpful to watch your results before diving in blind. Have you tried polygloss?

[@AngieHolden]

Not yet!

[@melybrasi]

Thank you for this video. I have been wondering if this would work. Now I know!

[@AngieHolden]

Definitely haven't found something that will work yet!

[@hannalbee]

Can you try the fuze on cotton????! Would love to see that one.

[@crabjoe]

Would you mind doing something like this for clear glass? I'm most interested in wine bottles. I make wine at home and would love to just sublimate the labels so I don't have to replace the labels every time I reuse the bottle.

[@AngieHolden]

I haven't found a coating I like yet but if I do I will try it on clear glass!

[@kimberlygoodfellow4155]

Great video. Thank you for testing these products

[@AngieHolden]

Thanks for watching!

[@andieford9553]

Whew~! Thank you! You just saved me a lot of time and hassle!

[@AngieHolden]

Glad I could help!

[@patleonard2884]

Thank you for doing this video! I am learning a lot. What is the difference between sublimation and silk screen on fabric? Which is better?

[@AngieHolden]

Silk screen is where you use ink to paint the fabric. You can see how here: kzbin.info/www/bejne/qai4kmVsaZ1si9E and sublimation is where there is a reaction and the ink is embedded into the fibers of the shirt for instance. Here is a basics on it: kzbin.info/www/bejne/gKPWeJ15i99oj6M

[@janejarvis6725]

The company of the product you used on the shirt saids that if you put to much product on the shirt causes yellowing.

[@AngieHolden]

Feel free to try it yourself! I just could not get it to work.

[@dchanging]

super clear & helpful

[@olivia8979]

You do the greatest videos that save us all so much time and money! This may sound weird, but I am glad it wasn't a success because i dont want to be tempted to buy even more stuff. For me, having a dedicated oven for the ceramics is a non-starter. I just don't have tons of room for that type of thing. So I likely will never do mugs at all. But for fabrics I'll stick with polyester shirts

[@AngieHolden]

I was hoping for at least ONE partial success!

[@gigles0927]

I also was hoping for one to be a success as there are so many cute inexpensive items we would be able to sublimate if it would have worked. Maybe in the near future there will be a company that will come out with a quality product seeing as a demand for one is on the rise!!

[@Crafts-and-cocktails]

Angie have you tried the Poly T Pro from dyepress on shirts?

[@AngieHolden]

The only ones I have really tried are in this video. I want to do more experiments but haven't yet!

[@soniajohansson6093]

TACK Angie, du är så bra på att förklara i dina videoklipp.

[@FilomenaDapaz]

what kind oven you use?? and they temperature?? thank you .good thing l Didnt wasted money on plain mugs

[@AngieHolden]

Time and temperature should be indicated on the packaging of the brand you purchase. You can use a regular oven or a counter top oven.

[@teresasuggs4411]

What do you use to clean your brushes after to prevent it from hardening

[@AngieHolden]

For things like this, I generally use a disposable brush.

[@anurse63935]

the spray for the t-shirt was very yellow. Im wondering though, how bright was the design on the 100% cotton shirt? Would it have been brighter on a polyester or blend?

[@AngieHolden]

Not sure. I wasn't happy with the results regardless.

[@daleflaherty]

wow!!! are you washing that shirt with that spray??

[@AngieHolden]

I was not happy with this spray and the results.

[@charlottemoore7580]

Please tell me how to seal autographs on a sublimated tumbler

[@AngieHolden]

Gosh I am really not sure on that one!

[@dekoproducts655]

Hi, teacher. Please send me the short cut material with the exact size. Thank you

[@jeannevasquez2341]

Angie hi, regarding the fabric poly spray, was wondering if you have tried this technique using your heat press instead of the Cricut press. I've seen a KZbin video showing no yellowing on a 100% cotton sweat shirt using a regular heat press. I've tried using my Cricut heat press several times with a poly spray and no matter what temp I use, there's yellowing (like it burns the t-shirt). So I'm wondering if maybe the result would be more favorable using a regular heat press.

[@AngieHolden]

OH maybe. I have on my calendar to try some more brands of this.

[@knitsewfancy]

Thanks for doing this video! I would love to know what happens when you wash that t-shirt. How much do the colors fade when washed and will the brown color leave?

[@AngieHolden]

I didn't test that as I wasn't happy with the outcome in this case. I am trying to test some more products to get some better options.

[@gigles0927]

You should run it through a wash to see what happens. I just found your channel and am subscribing today...I do hope you do the wash and give us a update. Thank you much for this video as I also was wondering about those sublimation products. So glad I found this and did not waste my money...

[@denisesmith8918]

Angie I am wanting to know if you can sublimate the bottom of a tumbler. I would like to put my logo on the bottom of my tumblers. Is there a way to do this?

[@AngieHolden]

I have seen people try and not have a ton of success.

[@eagleeyeprintingdesigning5443]

WHY NOT TRY PUTTING YOUR LOGO ON WITH VINYL ON THE BOTTOM OF THE MUG.

[@beccalovess9]

Hi, i am just wondering can it be cured in a mug press instead of the oven? Or maybe used in the heat press after being cured in the over?

[@AngieHolden]

I don't think it could be cured in a mug press. I am hoping to test some more coatings soon.

[@e.e.3141]

thanks for this video!!! it was soo good to know this!

[@AngieHolden]

Glad it was helpful!

[@tammykropf233]

I can't find links to the cotton spray or cups stuff.?

[@AngieHolden]

Links are always in the description below the video. Click show more if you are on computer. On mobile, swipe up on the video or click the arrow to expand the description depending on how you are watching.

[@smon7180]

Wondering if you've ever used Polygloss coating brand sublimation coating and if so how does it work compared to the brand you used in this video?

[@AngieHolden]

I have not. I do want to test some more brands, however.

[@johnkunze5362]

Have you tried sanding the glaze off the mugs before SPRAY coating?🤗

[@AngieHolden]

No I haven't.

[@cruiserjames2328]

the spray coat is more for darker shirts so do see the yellow on white it wont work but black and purples or pinks it not there

[@AngieHolden]

How do you sublimate on darker colors with this? I am not sure how that will work well?

[@cruiserjames2328]

@@AngieHolden i was talking about the coating that leaves a yellow mark its because it on white on dark items it dont leave yellow stains

[@AngieHolden]

Yes but you can't really sublimate on anything dark so I am not sure why I would use it for that purpose.

[@cruiserjames2328]

@@AngieHolden course you can you never seen black blue red yellow pink green and almost any colour hoodies tshirts etc etc i have no idea how or what your doing or what sub ink your using but i print a nice bold colour patent or picture or text that dont clash with the main item garment then sub it not every item is white for sub so i wonder why your only using white?

[@shirleypadilla3506]

Just found this channel and love it. New subscriber

[@AngieHolden]

Welcome aboard!

[@rekapadar6644]

Hi Angie. Thanks for the videos. What is the best sublimation printer in your opinion?

[@AngieHolden]

I have only used the one and it is one I converted. kzbin.info/www/bejne/Y5eXoHtorZKBq5I

[@mrsbscba141]

Have you tried dyepress polygloss.? If u do would like to see a video.

[@AngieHolden]

I haven't....yet anyway!

[@amskyctpmachineservice]

Which chemical need mixed tell me please 🙏🙏🙏

[@jennyparsons2765]

could you use an mug press or plate press

[@AngieHolden]

Yes you can.

[@memesissydollar3080]

Thank you so much . I want to craft so badly but I am stuck in the bed battling as hard as I can. I don’t know how to properly ask any one at all for any help. I thought it may b ok if I posted here for Admins or Owner I Hope to hear back from you soon if you don’t mind . Thanks in advance.

[@AngieHolden]

I understand! Anything I can help with?

[@carmellastevens335]

Hi Ms. Angie I am getting into sublimation and having a very hard time. I downloaded the ICC Drivers for my ET-2720 have the hipoo ink. However, when I use my polyester item the image does not transfer to the material. I have a Vevor 8 in 1 heat press. Can you please help me figure out what I am doing wrong? Please!!!

[@AngieHolden]

First make sure your ink bottles say sublimation ink. There is regular Hiipoo inkjet ink as well.

[@sydneyo.649]

Can you try that coating in the mugpress?

[@SefaSabanc]

Hello, when I apply the sublimation liquid to a ceramic mug, does it become ready for printing? I put it on my freesub heat transfer machine and of course the picture will be with tape, is that enough?

[@stacyn8075]

did the yellow fade on the fabric after washing?

[@AngieHolden]

I did not wash it as I was not happy with the results.

[@stacey97]

In regards to the T-shirt since it scorched the cotton, have you tried doing it on a lighter heat setting instead of what the recommended setting was? Was it still scorched if you did?

[@AngieHolden]

I haven't tried that.

[@rebeccaraley2516]

is is possible to use the spray sublimation coating on a tumbler?

[@becsuzjacsmom]

Thank you Angie- you saved me some money and I appreciate it. I think for now, I will stay away from trying these products. I could clearly see the difference. I was , however- surprised that the cotton took the ink ( the un-sublimated side) fairly well. I thought it wouldn't print at all

[@thatguyfromca]

cotton will take the ink, but will wash out when you wash it.

[@thelifeinthecaribbean.3669]

Can you use the mug machine to let the liquid sublimate instead of a separate oven?

[@AngieHolden]

That is not what it says on the instructions.

[@elizabethvallely4044]

Thank you Angie for this video, thank you for your honesty!!!! Great helpful video thank you for sharing!!! Hugs Liz x

[@AngieHolden]

You are so welcome!

[@elizabethvallely4044]

@@AngieHolden 💕

[@bayoubelle84]

Did the yellowing on the shirt wash away?

[@mikeledee8786]

When using butcher which surface goes on the shirt, shinny or matt? Thanks

[@AngieHolden]

I generally use uncoated butcher paper which is the same on both sides. However I have used coated and I have used both sides with zero issues.

[@mikeledee8786]

@@AngieHolden Thanks for you answer. Would you put the coated side up or down? Thanks again

[@AngieHolden]

I think I would put the coated side facing up if I had to choose!

[@DreamLoveBeautyandMayhem]

Have you tried the one that is in a spray can..

[@AngieHolden]

No I haven't!

[@Guitarsdetectors]

I think if I was looking at this to use on dollar store mugs, not only would it not be worth the time, but the results were pretty poor. Makes more sense to just use proper sublimation mugs and get the results you expect consistently.

[@lennyhipp]

did you try polycrylic? you can buy it at Lowes and Hobby Lobby. Also, you should experiment... maybe it yellowed because you pressed it too long?

[@AngieHolden]

I pressed according to the instructions. I have tried polycrylic on wood for sublimation and I did not like it at all.

[@lennyhipp]

@@AngieHolden i bought it for canvas. didn't try on anything else yet

[@baabugajula722]

How to print on the bottom of the mug ( External ) through sublimatiom

[@smithkapend]

Thank you for the video, can I have a link from a supplier to have these products on the Alibaba platform please?