20 Revit Tips and Tricks for Beginners I Wish I Knew When I Started Revit

[@kylesinko]

Learning Revit on your own is hard... Learn it the fast, fun and easy way! Access 100+ Revit tutorials on my website: successfularchistudent.com/revit/

[@smangalisongidi9757]

These Revit Tuts are really amazing to be honest. Simple and clear architectural language. Big up, I'll refer my mates to this channel.

[@kylesinko]

Thanks a lot! Cheers

[@angeloleysa6712]

Graduate architecture student here!! Unfortunately for me, my professors did not introduce any BIM software to us when we were still at school. I am now struggling because firms are looking for apprentices with BIM skills and I just happened to find your channel! Ive got my hopes up now as I am learning a lot about using revit with your tutorials! Thank you so much!

[@kylesinko]

So glad to hear you find my videos helpful Angelo! Best of luck with your architecture endeavors. Cheers!

[@sandrapieterse5017]

It is so cool. Loving it.

[@danabroqueza6973]

I am starting at a new job where this will be the first time since forever (college) that I will be using Revit again. your videos and tutorials helped A LOT on my preparation and recalling my revit basics. love all the tips and tricks that you covered. they are all very important! thank you and keep it up! 😇🤘

[@kylesinko]

Awesome! Hope it's going well. Thanks for the comment and best wishes :)

[@dimitardobrev3296]

Thanks so much man. I'm a professional Architect making the switch from sketchup and autocad to Revit. Your videos have been quite helpful. Best of luck in your career mate. 🇿🇦

[@kylesinko]

Thank you so much! Glad to hear you're enjoying the vids. I hope the transition is going smoothly. Cheers

[@dimitardobrev3296]

@kylesinko it is and I'm enjoying the process. What a vast software package!

[@ManuelFernandez90baby]

Doing the same transition from AutoCAD and SketchUp to Revit. How's it going 2 months down the line?

[@artifundio1]

I am just starting the transition, it's been hard. I find that each operation takes so many steps. I'm still adjusting to the new way of thinking. I really love SketchUp, since 2003. This is like cheating your spouse 😅

[@dimitardobrev3296]

@ManuelFernandez90baby it's going well! I'm over the learning Curve but of course it will take years to master

[@cyclonic7134]

Thank you sir! After 15 years of Autocad and Autocad Plant i am now diving into revit and these things help!

[@eph_pha_wah_ne4559]

I have been a subscriber for a while now but have been using autocad and sketchup the whole time however just recently joined a company that is using revit and had to make a quick switch. Your videos I find is truely very helpful and clear to understand. Thank you so much. Keep up the great work 😊

[@tomkardy5775]

Section Box RULES THEM ALL! Dzięki, Kyle, you've saved my inner peace.

[@Caspurrian1]

Thanks Kyle, you're making learn Revit so much easier, greetings from Chile !

[@kylesinko]

I’m so glad to hear Paulo, thank you so much!

[@shenaedheda9912]

Civil Engineer here looking to get into a BIM role! Thank you so much, your videos are great!

[@kylesinko]

Thanks a lot Shenae! Best of luck

[@sandrapieterse5017]

Your Awesome! Thank you from some random woman in South Africa.

[@terrancejackson6216]

Good tips. Some of these I've never seen before.

[@kylesinko]

Glad it was helpful! Cheers

[@OsKaRR]

ArchiCAD user here learning Revit for collaboration on projects with other architects & interior designers.

[@kylesinko]

Respect to you! Thanks for tuning in

[@ArchAhmadWaheed]

Thank you for sharing these tips Kyle

[@kylesinko]

You are so welcome, thank you!

[@robinsinko2900]

Wow great tips Kyle

[@deandorsey5080]

Great Video! Very useful! Thanks!

[@kylesinko]

Thanks Dean! Glad to hear

[@br2266]

Dang!!!!!!! that's super helpful, THANK YOU SIR

[@kylesinko]

Really glad to hear, thanks a lot!

[@sandrapieterse5017]

I am such a fan !!!

[@nielslabbert1839]

I found this very helpful! Thank you!

[@kylesinko]

You're so welcome!

[@mitchdrover6317]

Hey mate, cheers for the videos love your work. Just wondering if you'll be doing a Revit tutorial on topography and inserting a building to site. It's my biggest challenge right now.

[@kylesinko]

Thanks Mitch! I sure will be. The next course is going to include topography, families, model-in-place and more.

[@mitchdrover6317]

@@kylesinko Legend! I'll look out it for it

[@AJ-et3vf]

great video. Thank you!

[@kylesinko]

Thank you! You are so welcome

[@FSvizzard]

awesome tips.Thank you for that. I'm coming from Rhino and have a hard time to adjust the shortcuts. It seems that every "Ctrl+..." command wont work, as it just gives the annoying windows ringing sound when I use the command. Any Idea why that is?

[@cmpremlap]

Great job! You are a wonderful instructor!

[@kylesinko]

Thank you very much, cheers!

[@cmpremlap]

I have a quick question. I created a shared parameters door tag for clear width. Now door mark tags no longer show up in that project. When placing a door it shows a “?”. Is there a way to make Tag by Placement Tool for door tags default to Mark or another specific parameter without going to the Type Selector? If this is too much of a hassle, no worries. Thanks again.

[@kylesinko]

@@cmpremlap Hey mate, should be an easy fix to revert the default tag back to how it was. With the "Tag by Category" tool selected, in the options bar (the ribbon below the main toolbar) you'll see a button that says "Tags...". Click that and you can change your door tag back to the previous family. Sounds like there is something wrong with the family you've created. I encourage you to check out these tutorials to help with creating door and window tags: 1: a more basic approach: kzbin.info/www/bejne/hnaynWV6mr6tmas 2: a smarter way to use door and window tags: kzbin.info/www/bejne/gZDSpaCOmaiSac0 Cheers, hope that helps

[@Ricardo2707]

Amazing tips !

[@kylesinko]

Glad you like them!

[@amritdutta6695]

Can you do a similar beginner and intermediate course on Rhino, Grasshopper too. That would be really helpful. And Thank You for making these series on Revit for us. I am a 6th Sem B.Arch student, I had a tough time while learning Revit on my own but thanks to you, now I am confident on using Revit for my School Projects rather than using SketchUp. If possible please do one on rhino and Grasshopper too. ✌️

[@kylesinko]

Awesome to hear Amrit, thanks for the comment! I am planning a Rhino Beginner and Intermediate course for the near future. Stay tuned!

[@nunnaboinaprasad9059]

@@kylesinko that's good news📰

[@nunnaboinaprasad9059]

Awesome work.

[@kylesinko]

Thank you!

[@asimonbike6294]

After having the Revit beginner course we completed how much in the language of the LOD (level of details 100 to 500) we mastered. Btw thanks for beautiful course❤

[@fatimanaz1431]

Hello Kyle, I am a civil engineer and trying to learn Revit from scratch from civil engineer pov with all reinforcement details. And i have decided to start from your house series , Could you kindly comment on whether this series is suitable for me? Thanks!

[@crazyhawaiian40]

Where did you get that stone floor hatch pattern you are using? Also great tips!

[@cgimadesimple]

great tips!

[@kylesinko]

Thank you!

[@FaisalKhan-tr8mp]

It was helpful ❤️

[@kylesinko]

Glad to hear, thanks!

[@nunnaboinaprasad9059]

Good bless you bro 🌹,

[@kylesinko]

And you :)

[@Stan-Ard]

Very clear, will be bk fir more information cheers great vid 😃

[@kylesinko]

Thank you so much! Cheers

[@salamayad8757]

I'll start my first year of architecture soon, so which design software do you recommend I should be familiar with Rn? *I'm good at using ArchiCad, which is a BIM software as well.

[@kylesinko]

Revit for certain. Your archicad skills will transfer too. I'd also have a play around with Photoshop and any rendering software you like the look of. Enscape, Vray and Lumion just to name a few

[@MEPAutocadDraftsmanDesign01]

Hello sir ! Can i get project plan for study?

[@CleverButClueless]

thanks!

[@kylesinko]

You’re welcome!

[@mohammedasif7510]

Man u r awesome

[@kylesinko]

Thank you so much ☺️

[@jacobsobelman3923]

I never liked Revit when I first learned it in school (a couple weeks in a class teaching a variety of software). After watching your course, Revit seems a little less intimidating now

[@kylesinko]

I'm so glad to hear! Thanks for watching Jacob.

[@TusharMhaskar]

great

[@kylesinko]

Thank you!

[@ToanNguyen-ih9fm]

Mate you got 1 sub because you are Aussie :)

[@kylesinko]

Thanks mate!

[@peterallely5417]

Struth moit. Nah, I'm a kiwi though - Don't be an egg.

[@himanshuswami4207]

7:55

[@sukhpreetkaur8219]

Thank you 😇💐

[@kylesinko]

Always welcome my mate!

[@sukhpreetkaur8219]

😇😊👍

[@wrighthausracing9641]

What about Lumion?

[@kylesinko]

Lumion is a third party rendering software

[@gabrielesovaite7629]

A layer... that's so misleading on how to use worksets... using it for visibility control is an overall bad practice.

[@agnesagnes287]

Second that .The coordination and clash checking will be more complex with the consideration of work set . Using workset is more impactful when doing official submissions in the same team. Other than that, workset is rarely used

[@alagiedarboe7005]

Hello brother how are you ? plz I'm a beginner i really need your help plz if you can

[@radheyshyam8471]

Where u come from

[@JelilaIbrahim]

Please help me to almost like you