Super Bass Power from Power Acoustik Razor RZR1-2500D Unboxing

Super Bass Power from Power Acoustik Razor RZR1-2500D Unboxing

[@piperayres5295]

I paid 70 like 5 years ago..still using it

[@abrahamsagrero8623]

I just bought the new model with 1 ohm, I was so impressed!! Just for $100, this little honey badger amplifier does the job, 2,12" kickers, and the amplifier still laughing 😃

[@juandavila4898]

Lo usas con 2 12 dobles o sensillos y si los ase trabajar bien ?

[@danielmiller4492]

I got mine on mtx terminator box with two 12's. Wired at 2 ohm on amplifier. Sounds great. Does about 700 watts. Was a temporary replacement for the mtx amplifier that faulted. Sounds twice as good as amplifier that came with sub setup.

[@MicroModDude]

Yea, it's a little beast!

[@hendrix87boss]

700 on a 2 ohm load not bad at all u could prolly get 1000 Watts if u put them at half ohm just sayin 🤷‍♂️

[@MemphisMojo15s]

This is a beast of an amp. I have 2 DVC 2 ohm 15" Memphis M6 subs, and they're wired at 2 ohms each on their DVC's and wjth the 2 subs Hooked together at the amp, that makes them 4 ohm subs pulling 2 ohms at the amp. That's a perfect number for these subs on this amp because they're loud this way and the amp barely gets warm. The M6 subs are rated at 900 rms each. I am splitting 700 to them as this amp does 700 rms at 2 ohms. I think 1 of these amps on each sub would be phenomenal. People underestimate these amps all because they're sold at Walmart and not an install shop, however they think buying an amp from Amazon is professional 😂 Sorry..Had to say that. I have a 3600 watt Kicker amp on order and they certify their amps with the exact wattage they put out and give you a paper stating that. Either way, I'm happy with this amp for now. It's worth buying and saving money on a more expensive amp. I went the HYPNOTICS 2200 route, with videos of them, and they were junk. 3 of them went into protect mode and 1 started to smoke. Never had that kind of trouble all the years I've done this, until this go around, except for a JunkSEN (Jensen) 600 watt amp sold at Sears..Anyway, enough of that. Good luck everyone and yes, I recommend the PA Razor amp. I even have a video of it playing my 2 15's. It does a great job

[@kristopherdonaldson9569]

I believe you. But depending on the box size, you may be seeing an impedance rise upwards of 5-6ohms. Making what you're subs only see a couple hundred watts each. If you model your subs and box in winisd, you can get an idea of what your box rise will be. I'm only saying this because once I knew what my impediment rise would be, I wired my 2 dvc (dual 4) down to 1 ohm.. actually .8 ohms. Amp still runs cool, but it's putting out a lot more power. After box rise winisd had my impedance at @3ohms.. even though the two MM read at .8

[@hendrix87boss]

Um when u have a sub that is two ohms that's 1 ohm on each coil I'm guessing it's a dual choice coil so what happens when u connect 2 ohms to another 2 ohms ? U get 1 ohm now if u did this to each sub that makes each sub now 1 ohm when u connect 1 ohm to another 1 ohm what do u get ? .5 ohm so ur seeing a difference because ur running ur amp at now half ohm load ......let's get it together ppl the internet is FULL of false information

[@MemphisMojo15s]

@@hendrix87boss go to Sonic Electronix page and watch How to wire 2 dvc 2 ohm subs to a 2 ohm final impedance.. You can wire each individual sub series parallel and make it a 4 ohm load-On each sub.. Once you hook the 2 subs together, they become 2 ohms at the amp. You're correct, let's get with it people

[@hendrix87boss]

@@MemphisMojo15s yes but there was no specifics on this at all in the comment so when u just SAY I got this load from this ohm load it throws ppl off and no matter what on a mono block amp ....once u hook them subs to the amp there ALL connected but I see what ur saying and I KNEW that already it just wasn't specified why be specific about half of it but not the rest ???? Just sayin and if ur ADDING ohms I dnt see the point unless ur tryna get a cleaner bass response otherwise why? Dnt we want MO POWA idk I may just be an idiot then

[@MemphisMojo15s]

@@hendrix87boss I was as clear as anyone could be. Anyone that doesn't understand it needs to research it. Anyone that does understand it needs no explanation . you said what the ohm load would be and I explained that you can still get 2 ohm loads from 2 dvc 2 ohm subs. You made it sound as if you couldn't

[@watchandjewelryloft4713]

Just bought this to push a Pioneer SWX2502 Shallow sub in the pioneer box. Car I bought came with it and a JVC amp, but the amp can't push the rear speakers and this amp without shutting off. I know it's probably overkill, but it was $10 cheaper than the lower powered Jensen mono amp. Can't wait to hear this sub actually perform.

[@onehellcat6493]

$65 at a pawn shop and I've had 10's, 12's and 15's and it made them all sound good, can't beat it.

[@wiillthebarbertv9415]

Got mine pushing a gothic in a trailblazer, I was having huge problems clipping and going into protection mode but I figured out that I was receiving a dirty signal from my head unit, I switched the output to the mono sub using a splitter and it allowed me to only receive signals less than 80HZ so I can use my highs without distorting signal to amp. This thing slaps but you have to have everything right.

[@wiillthebarbertv9415]

Update, I’m now running it at 1 ohm on 2 gothic 12s , 5 cube box tuned to 30hz, 140+db

[@scottybeeman1779]

I'm having the same problem can you please let me know what you bought or what steps to take to get it from going into protection mode

[@ericjmasters]

I have focal utopia center 3” two 3” mids 4 utopia tweeters and 4 6.5” in the doors. All running on a helix v twelve $2000 dsp amp. So I spent over $11,000 on all my mids and highs and also two focal subs under seat. Now for bass I have this amp and two kicker comp c 12” lol. This amp slams and never gets hot. Never it’s insane with the tune coming from my helix

[@EL38ysuper]

I would of like to know what you got the tune set up at wished you would have shown that i can seemed to figure it out 😢

[@aundraymitchell609]

Thanks for video. Had been considering that one for a moment. Hope to get more dynos in the future 👍

[@MicroModDude]

It's a little beast for the price.

[@Johnny-zz1zv]

Thanks for the video brother. It was funny when he said telephone wire.😅😅😅😅😅😅😅😅

[@aaron2700]

I have one of these powering a skar zvx 12 @ 1ohm and it is obnoxiously loud.. obviously i know i should have something with 4 times the power for my sub.. but i just bought this till i have my power upgraded, its been soo good i havent been in a rush to even upgrade!!

[@daniellambertsr.713]

If you want more Bass pull the kicker out and get the Power Acoustik Gothic 12in dual 4 Ohms and run it down to 2 ohms guaranteed you will feel the difference

[@infiniteblaz3416]

Homeboy is running a Comp R. I’ve heard good things about the Gothic but it’s definitely not beating a Comp R especially since the Comp R is great at getting crazy low with authority. Lol.

[@jcwar6753]

@@infiniteblaz3416 Not to mention those gothics only last if you keep them at 4.

[@cleanbigboystoys]

That amp is a solid 600 watts at 1 ohm. Even thou they say it's not rated for 1ohm have been running one at 1 ohm for 2 years lol

[@MicroModDude]

Yep. It's a little beast. 👍👍

[@stanmondzelewski9253]

Keep in mind a amp dyno uses a FIXED ohm load. Real world speaker loads are dymanic. Ohms change as the sub moves. Its called impedance rise(box rise). You might be wired to a 2ohm load, but once the speaker cone moves, impedance goes up. As impedance goes up, power output goes down. That being said. I run it at 1.33ohm on 3 cheap svc 4ohm 12s

[@psycobone1]

I have this amp.on two 12 inch KICKER L7s & I cant believe how hard this little amp pushes them .I even have it wired to 1ohm & people think I have an other amp hidden somewhere lol

[@MicroModDude]

Yea, it's a hidden gem no doubt.

[@martinmendoza2447]

I run 4 12s at half ohm no problems no heating up this amp pushes all 4 really good

[@psycobone1]

@@martinmendoza2447 I added 2 more L7s .& your right it s pushing them good

[@geraldhyppolite8827]

Hi I have the same amplifier I’m trying to wire it myself I have a question. What gauge wire should I use with this amp for normal operation?

[@MrAlboogie04]

Best to go with 4 gauge wire. It only fits 8 gauge wire so look for a reducer from 4 to 8. Its going to push a lot of power and will actually heat up the thinner wires. I run 2 of these amps with 2 Alpine type S 1800w subs and they hold up great!

[@jamessettles6485]

Got one these on my 8" sundown audio in pro tuned box sounds really good for $100 amp

[@stanmondzelewski9253]

I clamp tested mine today. I get 555 watts at 1.33ohm at 40hz

[@Adam-om9hu]

Personally I think one of the reasons this amp is so good, is because it's made in Korea and not China.

[@MicroModDude]

That's a good possibility. Tomorrow I get another budget gem that puts out even more watts at 4 ohms for about $100 bucks.

[@user-eq5di6gr7y]

I got one it work good

[@younglb9236]

Will this amp run a sound stream 15 inch sub 2600 w & 1300 rms

[@MicroModDude]

@@younglb9236 Possibly. If you buy it at Walmart, just keep your receipt in case it doesn't hit hard enough.

[@michaelduncan1541]

I have it pushing 2 Skar EVL 12's at 1 ohm. My amp has NEVER seen 2 ohms. If gains and other adjustments are set correctly, this amp is a 1ohm monster all day. Been pushing 1 ohm since day one over 1 year ago and not the first issue.

[@whatta7793]

Yup, these handle 1 ohm no problemo. I would still recommend you put more power to a pair of EVLs though. Those need a Smart 3K or even a properly tuned 5K.

[@jcwar6753]

@@whatta7793 Was gonna try to use one for a pair of SDR's myself. Tryin to pick up a second one to match but I haven't hooked anything up yet. Was gonna try to run em at 1 ohm like everyone says and see how they hit.

[@whatta7793]

@@jcwar6753 one of these would do good for a pair of SDRs but a pair of SDRs should be able to handle a little more power too. Could get an RP 1200 for about $60-70 more and would get another 400~ watts. I'd recommend an RP 2000 for $212 though so if you ever wanted to upgrade subs in the future you'd have some more power left on the table.

[@jcwar6753]

@@whatta7793 Ya when I upgrade I plan on getting something nice, or 'ish'. I haven't fooled with any of this stuff in over a decade so I'm behind the times. My buddy gave me one of these so I traded for a nice box and bought a used set of Skars off marketplace. Hopefully it bangs good til I can get my hands on a nice amp.

[@user-pm9hd2zs5m]

Hey how can you connect 2 12’s on that amp

[@deagle1720]

I'm running 2 of these kicker compR 12s loaded enclosure with this amp and it bangs!!!

[@MicroModDude]

Sweet. What ohms you running them at?

[@deagle1720]

2ohms and I got it paired with 4 kicker 225w 6x8s in the doors and DS18 200w tweeters in the a pillars all on a Crunch 1500w 4 channel for them good mids and highs! I don't have any videos on my page but I'm going to make one soon just to show off this build! It was a budget build but it's STUPID LOUD! My neighbors complained after a good 1 minute test so I know you can hear me coming down the block. The Crunch 4 channel amp I paid $68 for off of Amazon and this power acoustic amp from Walmart for 99 bucks. $180 on the kicker 6x8s in the doors and less than $20 for the DS18 tweeters off Amazon. My uncle gave me 2 old dirty kicker comp 10s from before 2016 (300w RMS 600w max) I cleaned them up and sold them for 175 and turned around and put that towards the dual kicker CompR loaded enclosure (1000wRMS 2000w max)for $300 so I came outta pocket $125 for some 2000w kickers. I think I paid a little over 300 for all the speakers and 180 on 2 amps.

[@MicroModDude]

@@deagle1720 Hell ya! Lets see whatcha gotz!! 👍👍

[@MicroModDude]

I just ordered a new amp, so watch out for an unboxing in the next week or so for it to be delivered.

[@markchaz954]

@@deagle1720 man do a video am trying to see I like grabbing ideas from everyone and they building you he amaze what you can learn

[@koltk5029]

I ran 2 alpine type s 12’s on this amp and believe it or not I was very happy with it

[@MicroModDude]

Yea, it's a good super budget amp.

[@BoobeeMyles]

How, my 2 skar sdr-12s murder this amp.. it just shuts off

[@koltk5029]

@@BoobeeMyles I’ve hooked this amp up to a dd9515 (no not trying to say it’s good power just as examples here) 2 kicker 10’s my alpines and my new ct sounds 10” and I’ve never had this amp shut off or hit protect mode

[@koltk5029]

I also run a sound stream pre amp with this amp

[@koltk5029]

I recently purchased the 2500 skar amp to run my system but in a bind this little amp worked great for me

[@michaelgerdes382]

I have this Amp pushing 2 alpine type s 12s in a big slotted enclosure u can hear me coming from 3 blocks away its worth the money

[@dadraby7580]

I have it on 2 infinity kappas it pounds them out pretty good

[@anthonyreed7855]

Thanks for the video! Im getting this hooked up at car toys this week. Gonna run 2 12" kickers. They are charging me $800 because they said they had to tear my dash apart because of the stock radio. Should i question that? You mentioned you dont have to do all that with this amp. I will let you know if it bumps or not. They also said it wont bump that hard because its only 650 watts. I told them to look up videos like the one you made. Thanks again!

[@MicroModDude]

$800 is a rip off to hook up this sub. You can tap it into one of your door or back speakers with the high to low connectors. The hardest part is just running the power wire from the battery to the amp. I'd go somewhere to get it installed if you can't do it yourself.

[@anthonyreed7855]

@@MicroModDude its a 2011 bmw 535i and i dont want to mess anything up. It does sound like a rip off considering all my other cars with systems were hooked up pretty easily.

[@Dubzy99]

Always install yourself. Car toys and others always overcharge for BS KZbin will always be your friend with this kinda stuff lmao

[@DirtyGarageTx]

What would you recommend for 6 1/2 door speakers with tweets that won’t break the bank

[@MicroModDude]

Infinitys are really good for mids and highs. JBL might give a bit more bass if u want that.

[@jacobz360]

Would this amp be too much for 1 12 in kicker comp c ?

[@MrAlboogie04]

Nope! You can adjust the settings so you won't blow it out.

[@cobe1mllc]

Yea I got mines wired at .5 on 2 12 hifonics square I love it but it gets hot as a iron but I love it 💯had to upgrade to 30amp fuse mines kept popping

[@roblee454]

That’s not good 🤦‍♂️

[@djkeys415s]

I ran4 at 1ohm per sub 415s

[@syfa7115]

Do you know if the power acoustic 2000 watt amp 4 channel will power 2 12 inch subs

[@FoRealzTho]

hey man can i get the settings you used on the amp i have the same setup but would like a better setting on the knobs and freq

[@MicroModDude]

It's in my nephew's truck so not really sure what he has it set at. You just gotta play around with it because it will vary on what box and subs your using. 👍

[@killajamess]

Would that power of 10-in solo baric 600 rms 1200 watt Max sub

[@MicroModDude]

Totally!!

[@K2_slaughter]

How u made the power turn ok

[@andrewvasquez7491]

I have a alpine type r12 with 6/5 prv are they good for the amp tune u have it to

[@jasonhasin8696]

Did u end up needing that high to low connector or know we’re I could get one for the same model? That thing at 2:40

[@MicroModDude]

It's built into the amp. I ended up using the RCA jacks straight from the radio.

[@jasonhasin8696]

@@MicroModDude the thing at 2:40 is what I need I bought that model from a person but it didn’t have it and I have an original factory radio

[@MicroModDude]

@@jasonhasin8696 Get this: www.amazon.com/dp/B009VTDVMU/ref=cm_sw_r_cp_apa_glt_fabc_VW936GZEX4EDBMS4R6K8?_encoding=UTF8&psc=1

[@jasonhasin8696]

@@MicroModDude thanks

[@robertowens7771]

I got my hi/ love converter from auto zone $22 dollars

[@Twohunnidpercent]

Yooooo can you help me rig up this am to the kicker trtp102?

[@timothygray7650]

Yes its good.

[@dewaynejay1032]

Can you wire it to 1ohm with one 15in subwoofer without any issues

[@jimidmoorehead]

No single DVC sub can be wired down to 1ohm but you can bring it down to 2.

[@martinmendoza2447]

I have it pushing 4 12s at half ohm no problems

[@coreyd7060]

@@jimidmoorehead if its dual voice coil 2ohm subwoofer you CAN wire to 1ohm...

[@coreyd7060]

If its a Dual Voice Coil 2ohm subwoofer you CAN wire to 1ohm...

[@Lymeng25]

I’ve heard that some people run as low as 1 ohm

[@kristopherdonaldson9569]

Oh yes. And no.. My two dvc subs wired parallel show a .8ohm load connected to the amp. BUT after the impedance rise (3.3ohms at 36hz . tuning) caused from the large efficient box they are in.. the amp never sees that .8ohm load. They subs are always over 3 ohm, so the amp stays cool.

[@vctr3394]

Man cant wait

[@BabyJesus420]

I run 2 of the power acoustik 12s on this and its got power and don't run hot but still its crappy as far as clear bass

[@brandonneal1228]

It’s not the amp that’s crappy it’s them subs

[@robertowens7771]

@@brandonneal1228 I dont know what he's talking about, I have the same amp pushing a 15"wdx db drive sub and my car bumps hard

[@hughclah1942]

I have this exact amp and exact kicker comp r 12 in sub, how do you have it tuned????

[@MicroModDude]

Not sure. My nephew has it in his truck. Pumps really hard.

[@eugenekrabs3713]

Enough for Memphis 15s?

[@MicroModDude]

Maybe. It's a little breast!

[@eugenekrabs3713]

@@MicroModDude okay I’m trying it today, I’ll keep ya posted

[@michaelduncan1541]

Definitely pushed a zvx15

[@domiharris8790]

I bought two kicker subwoofers and bought this amp but some reason there’s no sound coming from the subwoofers and the AMP is powered and on but idk

[@MicroModDude]

Try a different rca connection.

[@domiharris8790]

@@MicroModDude ok well I bought two amp kits but it was 680 one so should I get the one that is in the 1000s?

[@domiharris8790]

@@MicroModDude it’s not the RCA bc I try both ways and put new ones and still didn’t work so I’m guessing it’s the radio

[@MicroModDude]

@@domiharris8790 I don't understand.

[@domiharris8790]

@@MicroModDude I don’t either, it can’t be the RCA it has to be the radio bc I bought it from Walmart for $119

[@392_RHINO]

Will this amp also be effective on Highs and mids?

[@mattsnider5904]

I asked the same thing. Think it's meant only for bass. Crossover I believe is just lower frequencies

[@392_RHINO]

@@mattsnider5904 appreciate it

[@mattsnider5904]

@dasuaveologist5823 yeah I was thinking about running a couple dj speakers in parallel off of one. Guess you could buy some F mods from Parts express...inline rca crossovers. I think they have them for high pass too. I'm thinking it was like 12db each. But one channel amp you could cut out the unwanted frequencies fairly well. Yeah foods by Harrison labs.

[@mattsnider5904]

F MODS not food stupid autocorrect geez lol

[@jackpattillo5014]

Any one know how to wire two 4 ohm subs to this amp

[@MicroModDude]

It depends on your speakers. Are they 4ohm? If so it's direct hookup.

[@bighulk617]

Think this can run two 12s plus door speakers

[@MicroModDude]

It's not for door speakers as it only has one output speaker connection for bass.

[@corybartz1793]

Yes as long as you don't wire it at too low of a final ohm load..personal I would run the Dr speakers off my head unit.

[@williamkeefer4140]

@@corybartz1793 can you run 2 smaller speckers off the radio and this mono block to the 12s

[@jakewade8119]

You can Ruin your amplifier by mounting your amp to the box will blow Is compassers

[@donaldwilliams2249]

I hooked this to my 2" 12in pioneer subs in a closed box with a 2 inch port and it sounds horrible and my Fosgate p300 hits way way way harder and this amp blew my under hood power fuse and melted it in 10 minutes its garbage

[@MicroModDude]

Your Fosgate p300 only puts out 300 watts. This Razor puts out over 600 watts. Your subs and electrical can't handle the power. It's a little beast.

[@corybartz1793]

And what size wire you running? Big 3? What size alternator? How was power wire hooked to battery? What was your final ohm load? What are subs, dual 2, dual4, how were they wired?. Lots of oom for user error, which normally that's where the issue lies

[@ChaosTherapy719]

Try wiring it to 1Ω 😁

[@MicroModDude]

Yep.

[@ChaosTherapy719]

@@MicroModDude i got mine wired 1Ω to my Sundown Xv2 10D2 that's rated 1500rms and it loves this amp. That kicker would blow the coil slapping the frequencies i can hit.

[@BoobeeMyles]

@@ChaosTherapy719 what is your amp set to.. my 2500 power acoustik goes into protect mode

[@BoobeeMyles]

Mine is also wired to 1ohm

[@ChaosTherapy719]

@@BoobeeMyles Watch BASSNSANE's video on how he tuned his Razor and follow it exactly

[@king.baby2884]

My sub blew that amp 2 mins in

[@MicroModDude]

You run it at 1 ohm?

[@mattsivert2594]

Made in Korea swap meet Louie

[@coreyd7060]

Korean boards are better than chinese just so you know. LOVE THE SIR MIX A LOT REFERENCE 😆😆😆

[@thomassenemounnarath3278]

You call that "hitting hard"?????????

[@brisket9007]

not that great my L7 and 2 15s sound bad but my uncles smaller amps makes them sound better

[@rickharding7209]

I bought 3 of these, 1 didnt work out of the box, the othe two push like 250 @ 4 0hm. Literally the worst amps I have ever purchased. They clip and protect before they make good sound, much less thump. Never again will i purchase from this company.

[@_luhfred3x]

do u still have to receipts for them

[@rickharding7209]

@@_luhfred3x no, unfortunately. I am terrible with receipts

[@_luhfred3x]

can he maybe help me get da amp or can u yk get me one like send me da money 😅

[@_luhfred3x]

can he maybe help me get da amp or can u yk get me one like send me da money 😅

[@rickharding7209]

what? @@_luhfred3x

[@mrdominio100]

That shit is barely moving man…What are you talking about?… and it’s not the speaker is the fucking amp that is not good enough I got the same sub with a different amp with the volume half way up and it looks like the cone it’s goin to come out.

[@tonykessler7401]

Remote knob is useless

[@MicroModDude]

Maybe yours is broken, but it works good for my nephew.

[@tonykessler7401]

@@MicroModDude it works, but more like an on off switch, I've talked to other owners that have the same issue

[@jl-heatfan4life717]

YES SIR I GOT THIS AMP WHEN IT WAS $70, THIS IS A MONSTER BASS AMP I STILL HAVE IT I LOVE IT FITS ANYWHERE IN UR RIDE, THIS AMP IS AMAZING 🎛️🎛️🎛️