SUPER FAST TEMPO MATCHING WORKS IN REASON 9!!

[@dr.strawberry5773]

damn i wish they made the "bounce to new recording" thingy more obvious in the manual, bro ive been wacking my brain over this for years now, no joke. god bless you

[@RashadCoesBMFR]

Glad to have been of service. 🙏🏾

[@SarahSpencerMusic]

All i gotta say is, you are my hero. TYSM for this!

[@KBlakK]

Nice!!! Easier than working with Recycle actually!!! Thanks for this. It's years later, I'm on R12 now, and just found this tut. Good lookin' out!!!

[@timothywilliams3206]

Damn man that was the easiest way to do it I've seen so far..I appreciate you spreading the knowledge my man..helps out alot.

[@Bobotightypants]

Most useful reason tutorial i've seen in a while. thanks man!

[@EsquireMusic111]

Man you saved my life with this one bro!!! Lol... Got a couple of drum samples I created that I could not match to my tempo! And been using this program for years and could not figure out what the hell was going on! lol Thanks bro!

[@clegrand72]

thank you for that tip about disabling stretch, sorted out my headache!

[@sunilsolanki]

one of the most helpful tutorials ever. thanks so very much man...

[@wesmatron]

Superb. The Reason community is being lead by some of the most helpful and uber-chill guys. Great stuff.

[@jbig808]

Keep these coming! You are an artist

[@gallectee6032]

3:51 1) Disable stretch. 2) Use keypad numbers and move loop into required position. 3) Right click loop and "Bounce clips to new recording" 4) Enable stretch back on. Quick way. 1) Hold control and drag loop into required position.

[@RashadCoesBMFR]

That matches LOOP TO TEMPO. Not the other way around. My technique addresses the problem of SAMPLING material and have it fit a set TEMPO. If you have a loop that is already truncated, then yes use the way that is also described in the video.

[@4akat]

master class all the way to 2020. Bravo Mr Coes!

[@areality40]

Great job Rashad! Found this video VERY useful for my needs in Reason!

[@crooked87]

good stuff bro. i remember u from futureproducers and found some of ya old tracks you produced. one of my favorite producers using Reason. keep it up bro.

[@michaeljohn2029]

Thanks so much for this share..!!! GENIUS... Ive been pissing about trying to get samples to fit in time etc, and watching other videos that have you chopping and messing about.. YOURS wow..Super easy with that tempo adjustment at first.. I cant believe ive missed this...Thanks again... Awesome info.

[@RashadCoesBMFR]

Thanks @Michael John! Appreciate the props.

[@woodardkidfromthestoop6530]

Thank you geez. This became so frustrating going back into Sound Forge/Audacity to Recycle then to Reason

[@meemresh]

Bruh this is gold.. Been using Reason for years and I've always had this issue smh. You unlocked Pandora's box LOL! Very very dope! Just sub'd to your channel 🔥💯🔥💯🔥💯

[@dblktv]

Best Reason tutorial I found for 9 thus far.

[@javierfernandez4329]

Respect man, so many good tips in 8 min. Really good tutorial, I encourage you to do more, you explain everything really well.

[@RashadCoesBMFR]

Check that... I am currently putting together a tutorial that puts this trick in practice. I'm making a beat now using a FAMILIAR sample. Sample it strains into a track, chop it, loop it find the tempo and correct off beat drums. Sounds amazing!! Next I'll chop pieces of that sample and make drum patches and add original material from there. Stay tuned coming soon!!

[@Psychronic86]

3:24-4:00 is the tip you are looking for Thanks mate!

[@RashadCoesBMFR]

Thanks... I have been using Reason since its release...Will post more tips... trying not to cover old ground...

[@esIworld]

Thanks. This has saved me a lot of headaches.

[@Hamiltron]

very cool man. just started using samples. this is a great help!

[@brooklynbeatdownmusic]

You are a godsend!! I've been working for weeks on a remix and nothing synchs up. Have Reason 6 and not idea this was an option. Thanks again for this!

[@RashadCoesBMFR]

+Deejay Renay How did that remix turn out? Link?

[@brooklynbeatdownmusic]

+Rashad Coes It was a breeze...thanks again.....I haven't finished yet..had to work on other projects but will send you a link when it's done.

[@RashadCoesBMFR]

+Deejay Renay glad to know I helped make your job wasier

[@ijjkfam]

Thanks this is one of the top tricks ive seen...

[@vladi569]

Thanks man... this video really helped me get through my problems I had with my song. :)

[@zikiplus]

Where have you been all my life!! Everyone else has skirted around this posting useless videos online. This is exactly what I have been looking for!! Big up uno self!! Just need to try with tracks that don't start on the 'down' beat...

[@RashadCoesBMFR]

Glad I could help. If there is something you'd like to see in a video please let me know. KZbin is filled with how to vids, I only want to do something that hasn't been covered or clearly explained. Appreciate all comments

[@SeanyStacks]

Dope video bro. Just when i thought i knew it all!!!

[@RashadCoesBMFR]

SeanyStacks glad you dig the info. #Respect

[@pilgrim5355]

Hey man love the tutorial here. Could you do a vid on how to EQ kick and bass, specifically for hip hop?

[@PrAnG2000]

Seems like this option has been removed in R11

[@SamuelCape]

Excellent tip. I'm going to use the CRAP out of this to arrange old non-metronome songs and demos into new material. Great job!

[@RashadCoesBMFR]

Thanks for the positive responses... I am pretty busy but I try to share anything I can. If there is something in particular I can make a vid of please send an email to [e-mail].

[@rashadcoes9043]

+James Robinson appreciate the comment. Just trying to help out my fellow Reason users Cheers!

[@RashadCoesBMFR]

Yes... That is another option... This technique makes it really easy to lock in a tempo... I used to work backwards by chopping my loop, then load it in ReCycle so I'd know the tempo... This way I can skip ReCycle altogether...

[@Thesuproducer]

Bro i had to add this to my favorites thanks homie for guys like you

[@Jime0326]

This video was extremely helpful. Thank you

[@sealdazeal]

Man bro... God bless you man. You just saved me a ton of time in figuring out people's crazy tempo's they put a lot of the classic's too. One question though.... some of us are on Reason 9 and it does the same thing you instructed here. Should we always look for a perfect loop before starting this process?

[@RashadCoesBMFR]

Thanks bro! I am working on another tutorial with using REX files. Cool little trick you can do in Reason Record (Or Reason 6)

[@irise01]

great video!!! thank you very much. Subscribing to your channel..keep up nice work.

[@RashadCoesBMFR]

I'm putting together more tutorials... I really like sharing things that makes workflow EASIER. there are a miullion places to go to get tips on how to mix things... The market is flooded actually,. I try to share the things that others aren't. If you have asny questions you'd like answered, I'd like to address those directly. Please send questions to [e-mail] Thanks Rashad Coes

[@RashadCoesBMFR]

Some times you will need to "fine tune" the numbers to the RIGHT of the decimal. once you get it to make a SEAMLESS loop.. SAVE AS A NEW RECORDING! Doing that time stamps it with the tempo information. Once you have it looped perfectly and have it saved as a new recording, turn back on the STRETCH. Then you can just switch the numbers to the RIGHT of the decimal back to ZERO...

[@nigel544]

Quick and easy bro. Thanks so much.

[@Kingjames313]

This shit is easier than the stress of Recycle, damn! I've been using Recycle since Reason 3 and never figured out how to time loops/chops. i wanna cry for not knowing this shit eons ago.

[@djkirkdigglerusn5476]

can you doo a video on beats with them super fast samples too a not so fast beat please. I dont know what they call that

[@MadChemistMusik]

2 things how do you get it so the sample lines up exactly with the end loop line? mine comes iwth in a dew milimeters, also after i disable stretch and lower the tempo to the loop line it doesnt stay there and goes back to the origional length. If it matter im using a full track from george benson.

[@chickyoungsabawbag]

Really good tutorials! Thanks

[@RashadCoesBMFR]

Next I will put together a video that matches accapellas to bearts and vice versa. Same idea applies its just not beat based. Stay tuned.

[@deanc2000]

Why didn't you do the time stretch thing on the first sample?

[@mistagrey99]

Nice work. Great tips.

[@MixmanD28]

Ex-cellent tutorial!! Thank you!!👌 🌟 👏

[@RashadCoesBMFR]

Respect! Thank you for watching!

[@soundsfromYYBY]

does this work with full beats before recording vocals

[@RashadCoesBMFR]

I got you Dapp... I'm gonna stick to Reason though... You can apply most of it to other programs but I prefer working in Reason 6.5

[@dorothykmusic]

this video is a gift from god. thank you

[@visitnetflixxxandchilldotc4068]

💯Good Job On This Tutorial. Quick To The Point, Easily Understood!💯

[@JacquilaRose]

Yes its 2017 and this still saved me thank you!!

[@redkeysforeverinstrumental2513]

Do you know how to time stretch on Reason 5?

[@1lovjoy]

Bro-u just created a fuckin MONSTER!! Thanks so much homie!

[@usingThaForce]

Genius HEBREW you are! Genius

[@GtrLuver]

Great video. Thank you.

[@quajoe82]

got it on tempo but sample sounds choppy when i try to spped it up ..

[@davidvalens3337]

Dude would love to see you make a 2019 version of this tutorial

[@RashadCoesBMFR]

You asked for it... YOU GOT IT! Post up soon!

[@davidvalens3337]

@@RashadCoesBMFR using the latest version of reason?

[@RashadCoesBMFR]

@@davidvalens3337 Reason 10 yep. I'll try and do a quick vid this week

[@jimmynitcher]

Very good tutorial... BUT..(and this is probably why people are still having trouble) it assumes you know the length of your sample in bars. So it should start with counting the beat in the sample to get that. I teach this stuff and a lot of people can't do it.

[@RashadCoesBMFR]

Good point. Kinda assumed that if people are sampling they know how many bars they are sampling. You're right... I NEVER a considered that someone sampling would know how to do that. That is also a little sad too. Lol.

[@ghostnotebeats]

So basically u can chop your samples and reload them in the sample

[@jeremywatson1604]

this didn't work at all for me, maybe I did something wrong, I chop my samples up in audacity, but it takes soo mu h time that its just frustrating, im lookin for a quicker way, so I loaded the sample into reason and did everything you said in the video but it aint matchin up

[@kooldjmagic]

what about beat matching with an acapella

[@RashadCoesBMFR]

+kooldjmagic I have a video up but Reason cut my audio track...

[@paulking20]

trying to do this in reason10 I can't figure it out any pointers

[@JestersGeneration]

How would I go about matching not just a clip of a song to a specific bpm but a track in its entirety? Say the first two bars match the click but slowly slide away from that click?

[@RashadCoesBMFR]

Then you'll have to go into the decimals. If the track drifts, then you'll have to split the track and fix it in sections.

[@JestersGeneration]

I figured I could do it that way but it's really time consuming and thought maybe there was a simpler solution. Thank you for your response! Great vids!

[@RashadCoesBMFR]

JestersGeneration absolutely. I'd definitely try using the numbers to the right of the decimal first.

[@tassjestoes]

Thank you🌸🌹🙏🏾

[@RashadCoesBMFR]

@deanc2000.. Uhhh Thats EXACTLY what I did.. lol.. Let me know if what I was saying didn't make sense...

[@andrewlyden1278]

excellent , thank you

[@TWESHELLSHOCKR]

great stuff.

[@patearnz7432]

how can u do this for a full length track cuz matching the temp for a loop is easy but when its like 100 bars it seems to go off time eventually

[@RashadCoesBMFR]

It depends on the material. If you're using a track that was played live, then there IS no fixed tempo... It will drift because the drummer is a human lol...

[@LifeofPhi]

I added a dr octo rex beat with 128bpm and want to add a full song and speed it up to match with that dr rex beat...but I can´t get it synced like the way you shown in the video :/ What to do?

[@JamesBermingham]

Nice.. Thank you

[@Dr9000]

thank you so much buddy!

[@RashadCoesBMFR]

Fasho mang!

[@jesserh5908]

Say I bounce 4 slices, then load them into NNXT, then auto map zones chromaticly.. So I have 4 slices are assigned to 4 keys on my keyboard.. How can I speed them all up? I tried to auto map zones but it only assigns 1 slice to a key. I want to speed all 4 slices up

[@RashadCoesBMFR]

If I'm understanding your question, you can't "speed up" a slice in the NNXT without changing its pitch.

[@jesserh5908]

+Rashad Coes yeah bro that's what I want to do but don't know how.

[@jesserh5908]

+Rashad Coes I want to change the speed and pitch but how do i do that with 4 slices

[@RashadCoesBMFR]

Well, quickest way to me would be just to change the pitch using the "semi" knob in the pitch section of the editor. Just below pitch bend range is a set of four knobs. If you select ALL FOUR SLICES, any adjustments you make will affect everything selected

[@jesserh5908]

+Rashad Coes thanks man..

[@warrensutton7302]

think they should introduce a beat mapper like in acid pro . less frikin about and more remixin

[@jroobz]

really great, thanks!

[@SouthernEmperor]

Preciate it homie!!!

[@RashadCoesBMFR]

In a way, but the way i do it I can load them into any module in Reason I want to...

[@lexadoma]

good stuff man, thanks!

[@tonybarber3535]

thanks fam you da man!!!!!

[@GtrLuver]

Does this work for Reason 7? I can't seem to get it to work right.

[@RashadCoesBMFR]

Yes it works in ALL versions of Reason that have audio tracks. If you continue to have issues feel free to email me@ [e-mail]

[@AirscapeRulez]

Rashad Coes hey mate useful tutorial but i have a doubt.... why in the first method you select loop and disable stretch.... and later in the second tip you don’t disable stretch in the audio clip for match tempos? Would you like please explain me it??? Thanks! I use reason 10.4

[@RichardNL70]

Nice, thanks man!

[@goodbyedad]

Dayum. Supa Nice.

[@SIRROBERTTHEKEYTARMINATOR]

THANK YOU!!

[@HiImRack]

Thank ya kindly (pops voice)

[@pfklol2397]

This apparently doesn't work in reason 9. When I tried it all it did was scroll through the track when I changed the tempo.

[@RashadCoesBMFR]

Well of course it works... Its working on the video! If you need help figuring it out email me @ [e-mail]

[@AlexJohn2us]

THANKYOU x

[@Retinus]

Nice! Thx!

[@lesterbernard3866]

thx for the info

[@magnustorque5528]

So good!!!

[@kevinboone240]

HAAAAAAAAAAAAAAA MY BIG BRO BMFRUSH IS VIRAL!!!!!!!!!!!

[@RashadCoesBMFR]

Thanks... Feel free to link. I'm trying to grow my tutorials. If you have a question or suggestion please feel free to email me [e-mail].

[@DomstarRecordz]

Salute!!

[@Breakbeat90s]

sample from evidence :D

[@Vick8602]

👍👍🔥

[@RashadCoesBMFR]

I think missed a step. Hit me [e-mail] I'll try and walk you through it... Just remember if you chop a loop out of a larger portion, you MUST #1 DISABLE THE STRETCH FEATURE(right-Click select "Disable Stretch"). #2 BOUNCE CLIP TO NEW RECORDING. (Right-click select "bounce to new recordings"). Once you do that pay attention to the wave... you will see it move... I'll do another quick video...

[@416EoD]

Wow Thx

[@tellygoodnow]

are you sure this works in reason 9?

[@HouseWolfMusic]

Damn I'm done with Recycle. THANKS