Super Glue and Baking Soda Miracle! Pour Glue on Baking soda and Amaze With Results

Hello everyone! You are watching video "Super Glue and Baking Soda Miracle! Pour Glue on Baking soda and Amaze With Results"
I hope you enjoy watching my video!
► Subscribe: bit.ly/Creatio...
On Creation Holic channel, you can learn various inventions, science projects, crafts and DIYs teaching how to reuse or recycle.
© Copyright by Creation Holic ☞ Do not Reup
#superglue #diy #tipsandtricks #bakingsoda

[@gretasnipe7631]

One thing none of these videos warn you about is the fumes when super glue and bicarbonate are mixed. First time I did it they nearly knocked me out. Do it outdoors or in a very well-ventilated area and wear a mask.

[@creationholic101]

Hello! thanks for your comment. Wish you all the best!

[@suprememasteroftheuniverse]

There's no reaction. That smoke is just normal for "super glue" when it's hardening. That's the normal glue curing reaction.

[@Dranok1]

​@@suprememasteroftheuniverse "That smoke" (there is no smoke, no combustion is taking place so no products of combustion are present, it's fumes, as the OP said, from the purely chemical reaction of the curing process) "is just normal for super glue" (which is why the instructions for use tell you to work in a well-ventilated area, like the OP said). "That's the normal glue curing reaction." Quite correct, and perfectly in support of the OP's statement of warning, so why did you start your response with the blatantly incorrect "There's no reaction." It makes the rest of your statement redundant in a daft way: "I can't make up my mind which is correct, the voices are telling me two contradictory facts but they are always true so I believe what they say to me..." Excessive fumes can be quite debilitating for some -- they especially create an acidic reaction to tears, like when you cut onions but worse, and if you breathe them in you can be in a world of pain for a short time. Cyanoacrylate deposition in a fume cabinet is a classic way of lifting evidence off delicate surfaces, for instance, showing how much fumes can be released, and there's even various shots of fumes in this video :-) The OP simply gave a very wise warning _from direct personal experience_ given the abnormal amount of super glue used in these methods, so why go and make yourself look like a fool? I'm sure you're not really...

[@BLAZE084]

Thanks for the heads-up! Much appreciated.

[@valentinanon7883]

i don t wear Mask anymore ! Fuck the COVID !

[@johngraves6878]

The superglue for bolt removal is a real eye-opener! The knurled knob at the end is rather amazing, too!

[@creationholic101]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@Dranok1]

Those are the two I came to comment on also! I've seen various tricks to tackle a rounded out screw head but never thought to mould a new screwdriver impression on the top -- brilliant! (So long as the screw isn't jammed requiring excessive effort, I doubt this is anywhere near as strong as the original;-)

[@bangla70s]

How the knurled knob comes smoothly out of the spanner remains a mystery.

[@gungadin164]

​@@bangla70s Just prior to fabricating the knob, the OP sprayed the spanner with some kind of lubricant that prevented the glue/baking soda mixture from bonding with the metal (see at 5:30 of the video)

[@FreshandFelicia]

What did he spray the inside of the wrench with?

[@scottpaget2925]

I’ve been doing this for years now and it is a miracle. Anything superglue sticks to having baking soda strengthens it ten fold. Two things you must remember, 1) you can’t paint over it and for a finish look it is very difficult to make it look clean and 2) this one is very VERY IMPORTANT, DO NOT GET IT ON YOUR SKIN!!! I can’t stress this enough, it will burn you and nearly impossible to get off without taking skin with it!!

[@nicolaottomano]

Super glue can be easily removed from skin using acetone (the same product used to remove nail polish). Of course it should be always handled with care and, if possible, wear protective glasses.

[@Throckmorton.Scribblemonger]

6:10 shows it can be painted.

[@creationholic101]

Hello! thanks for your comment. Wish you all the best!

[@CraigGrant-sh3in]

Pictures? lol

[@fewwiggle]

@@nicolaottomano "easily removed from skin using acetone" Acetone is nasty stuff to be putting it on your skin. Regardless, I think the OP was most concerned with the HEAT from the baking soda and glue reaction. Anyway, as many have posted, do this kind of thing in a very well ventilated place AND wear gloves or whatever to protect your skin.

[@neo-kq9xk]

素晴らしいアイデアです！ ネジ頭の修復などとても助かります。 epoxy putty　よりも遥かに手軽で安全で、身近な材料で出来る事がとても素晴らしいです。 よても良い情報を共有していただきありがとうございます。

[@creationholic101]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@wingnut2893]

The only thing that my superglue will fixate absolutely rock solid is the cap on the bottle.

[@robb8235]

always store super glue upright....... even the little tube ones

[@250cb7]

素晴らしい！ 勉強になりました。ありがとうございます。

[@creationholic101]

Welcome to Creation Holic channel! Thank you so much for your support

[@aramakizake3948]

これはいいことを教えて頂きました。プラリペアより安価に使用できそうですね。ありがとうございます！

[@creationholic101]

Hello. Welcome to my channel. Thank you for your feedback!

[@eunc00]

When doing larger repairs you should always add the baking soda to the glue or you'll get pockets of unglued soda, you can see them clearly on the corner repair.

[@creationholic101]

Hello! thanks for your recommendation. Wish you all the best!

[@ATomRileyA]

Great stuff i had forgotten about doing this with baking soda. Step 7: Unglue your hand to whatever you superglued :)

[@fluchterschoen]

*Whenever I'm baking a cake, I always add a few drops of cyano superglue along with the baking soda. It gives my cakes a more crunchy texture and makes them resistant to eegits who try to break them by tapping them with the plastic handle of a screwdriver.*

[@terryboyer1342]

🎂👍

[@creationholic101]

😌

[@dotarsojat7725]

Lisa Douglas…?

[@tommyl5319]

Also works for uranium cake

[@trueriver1950]

I am reliably informed that this is the secret ingredient in Dwarf Bread, as used on the discworld(R).

[@user-kitune-densya-game]

思った以上に便利で素敵なアイディアですね🎉 重曹と接着剤が反応して固体化するのは初めて知りました！ 教えてくださりありがとうございます😊

[@creationholic101]

Hello! Welcome to Creation Holic channel! Wish you have fun watching the video! You are so kind to leave me a comment! If you have a good and useful ideas, please share with me! Wishing you all good things!

[@feeltheforce10]

Super glue has always let me down and never stuck what i wanted to stick back together - BUT it never failed at sticking my fingers together !

[@creationholic101]

I am sorry to hear that. You might wear glove while using super glue. Have you try using salt water when super glue stick to your finger?

[@trueriver1950]

Or sticking the cap onto the tube

[@testodude]

Super glue works perfectly on skin. It really should be called skin glue.

[@trueriver1950]

@@testodude works perfectly on dry or dryish skin. It's actually slightly soluble in water, so fingers stuck together can be separated by using a blunt instrument such as the handle of a spoon to gradually prise them apart under running water. It's a slow job, typically ten to twenty minutes, but preferable to paying doctor's bills. Even better if available is to use the solvents designed to remove super glue. Fun fact: Police teams attending protests where the protesters have glued their hands to fixed objects now take the solvent with them as a matter of standard operating procedure, reducing the effectiveness of the protest tactic.

[@flipper2392]

Due to previous experience I would never use superglue with bare hands, I always wear latex gloves.

[@creationholic101]

Welcome to Creation Holic channel! Thank you so much for your support

[@jmd12127]

Doc told me I broke my leg, and I needed a cast. "No thanks," I replied. Went straight home and reset my compound fracture with a little super glue and baking soda. I was fine in a matter of minutes!

[@Throckmorton.Scribblemonger]

US healthcare.

[@creationholic101]

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

[@BigHenFor]

Yeah, and how are the 3rd degree burns doing?

[@bobl.1044]

I thought the second one was going to be a ping-pong table for a pair of mice

[@creationholic101]

Thank you for sharing your feedback and expressing your perspective

[@mmkl4791]

これはすごい発見!!!いろいろなことに使えそう🥺✨

[@creationholic101]

Welcome to Creation Holic channel! Thank you so much for your comment! have a nice day!

[@user-sz4vq8kc4m]

どのケースも実際に困った事があるから、どれも関心してしまった。

[@genrlgadget]

I had heard that this combination was great for fixing a guitar nut slot that has been cut too deep. I never would have guessed it to be this robust, though. Thanks for the video!

[@creationholic101]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@theboofin]

Yeah, works well for worn nut slots!

[@IanDarley]

Yep, I've done this in the past.

[@Hakunedayo]

안녕하세요 한국에서 이 영상을 보고 있습니다 주변에 구하기 쉬운걸로 큰 효과를 볼 슈 있는게 좋았습니다

[@creationholic101]

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

[@Feed_The_Fink]

The stripped screw head and the lamp thumb screw are amazing.

[@creationholic101]

Thank you! Cheers!

[@timfolland420]

That trick has been used in building balsa wood model air planes for over 40 years! Works very well! 👍

[@creationholic101]

Thanks so much for your information

[@michaelaiello9525]

That stripped screw technique is crazy useful!

[@tyronefrielinghaus3467]

I REALLY LIKE the stripped + head screw trick : fantastic! (South Africa)

[@creationholic101]

Hello, you are so kind to leave me a comment! If you have any other better ideas, please share them with me! Wishing you health and happiness always!

[@mehmetmoral4125]

😅Qd

[@mehmetmoral4125]

​😅.o

[@uckhai-othicuocsong]

Keo siêu dính và phép mầu Ban King xo da rất hữu ích. Cảm ơn bạn đã chia sẻ ❤

[@user-xk3zo8xx6f]

これは良いや！ また１つ利口になったよ。

[@pffpffhaha8305]

나사는 진짜 천재적이에요 👍👍👍

[@creationholic101]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@1109rna]

순간접착제 바를때 그냥 바르면 떨어져버리는데 베이킹소다 부린뒤에 그곳에 순간접착제를 바르면 잘안떨어지나보군

[@minitanku]

The stripped screw idea is huge, what a good application

[@creationholic101]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@otousansanjino4495]

素晴らしいアイデアだと思います。問題は単価ですね。 ところで、長期間使用した場合の耐久性や耐水性はいかがでしょうか？

[@creationholic101]

Mixture of super glue and baking soda can create a waterproof seal. When combined, super glue (cyanoacrylate adhesive) and baking soda undergo a chemical reaction that results in a durable and hard substance. This mixture can be used for various applications, including filling gaps, repairing items, and creating a waterproof barrier.

[@CemKalyoncu]

You can replace baking soda with cotton. Due to fibers, cotton is stronger compared to baking soda along its threads

[@dcbdcbdcb]

CA Glue + cotton gets very, very hot

[@CemKalyoncu]

@@dcbdcbdcb I don't think baking soda stays at the same temperature but you are right, it get quite hot, even smoking hot at times but I don't think it will get hot enough to ignite.

[@creationholic101]

hello and thank you very much for your recommendation! Wish you the best!

[@TheKlink]

Wouldn't it be more difficult to apply than bicarbonate of soda?

[@MartinMaat]

I've seen this done with steel wool too. Perhaps the combination with baking soda would be stronger still.

[@KAKASI0142]

すばらしい！ すごく役に立つアイデア、早速ためしてみます。

[@creationholic101]

Hello! I am glad you like this ideas. Wishing you all good things!

[@akasumi999]

潰れたネジの復活方法は素晴らしい。強度UPの情報以上にタメになりました。

[@creationholic101]

Welcome to Creation Holic channel! Thank you so much for your comment! have a nice day!

[@koezou_umiyama]

めちゃくちゃ役立つ情報を提供して頂いてありがとうございます。 いいねだけでなく、チャンネル登録もさせて頂きました。

[@creationholic101]

Welcome to Creation Holic channel! Thank you so much for your support

[@MirlitronOne]

I never cease to wonder just how many times KZbin contributors can rediscover this well-known composite.

[@creationholic101]

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

[@SpamSucker]

Turns out it wasn’t well-known to me, and I’m no spring chicken. So glad that I stumbled across this video!

[@Roberto231973]

From holland here

[@zeta122]

日本人です😊 素晴らしい🎉

[@creationholic101]

Thank you! Cheers!

[@pauld.9856]

A big 👍for this Vid. I discovered randomly that wallpaper paste and paper can become very solid. The smaller the scraps of paper, the stronger the connection. If you ground paper almost to dust and mixed it with paste to form a pizza dough-like mass, shaped it into a desired shape and then dried it, you had a very light and incredibly stable mass.

[@creationholic101]

Hello! Welcome to Creation Holic channel! Wish you have fun watching the video! You are so kind to leave me a comment! If you have a good and useful ideas, please share with me! Wishing you all good things!

[@clearwoodcouk]

yes indeed! I believe you have discovered... Papier-mâché! It's a classic modelling material, well worth investigating

[@stevet8833]

Samurai made their armor from this type of material. Laminated paper.

[@clearwoodcouk]

@@stevet8833 I'm afraid you've got that wrong Steve, Samurai armor was in fact constructed of iron plates, joined by cords or leather straps. Papier mache is great stuff, but it's no match for steel swords, spears, or bullets. There's a comprehensive history on Wikipedia...

[@pauld.9856]

@@clearwoodcouk Yes, it's probably made of the same material, but I was amazed that it was so much harder and more stable than what I know, which is used in egg cartons, for example. What I got from it would actually have repelled clubs or hammer-like weapons. I can imagine that the samurais experimented with it. 😁

[@dougbas3980]

Greatly admire your skill. Thank you for another method I can use. THANK YOU!

[@creationholic101]

Welcome to Creation Holic channel! Thank you so much for your support

[@psidvicious]

“Amazing” wasn’t quite the word that came to mind.

[@creationholic101]

Thank you for your comment. Wish you have a nice day!

[@RickDrew]

There's been entire shows done on how Super Glue and baking soda basically saved the Star Wars prop dept.

[@creationholic101]

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

[@TamCatG]

I have known about this trick for a while. My guitar teacher told me about it, but I didn’t know it had so many cool uses. Great vid.

[@creationholic101]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@dannainan]

Nice! I'm curious, how do you use this on a guitar?

[@TamCatG]

@@dannainanif you have a dead or buzzing string from a worn or cracked bone or plastic nut, or need to raise the action, you use it to fill in the slot that the string sits on. Let it harden overnight, and gently use a nail file to shape the nut to match, then carefully file the slot to the height you need. Also it makes a good filler for a quick repair in the binding, wood, inlays, or saddle on an acoustic.

[@kfox153]

@@dannainandepend on what you need to do.

[@darrenwatson874]

It’s great for guitar nut and acoustic saddle repair

[@luthgardabadawen5617]

Very economical, worth saving. Thank you and God bless you.

[@creationholic101]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@user-mm2dk9pn4o]

有益で，安全な情報をいただきました。　日常生活で役に立ちそうです。　ありがとうございました。

[@creationholic101]

Hello. Welcome to my channel. Thank you for your feedback!

[@Colorado-Tinkering]

I’m liking the introduction to some of the background music bands. 😊

[@creationholic101]

Hello! Welcome to Creation Holic channel. I am very happy to read your comment. Have a good day!

[@postalinVT]

Love that 'knob' at the end.

[@creationholic101]

Hello! thanks for your comment. Wish you all the best!

[@VideoGuyHawaii]

Great ideas. That black knob at the end... I have that exact problem with exactly the same lamp ... what did you spray the wrench with to avoid sticking? WD-40? A lubricant?

[@creationholic101]

I am using RP7 as lubricant. Wishing you all good things!

[@kamui607]

これと同じ原理だと思いますが、プラスチック成型材として、粉に液体をかけて固まるものが市販で売っています。 重曹と瞬間接着剤で出来るんですね！　教えて頂きありがとうございます。

[@creationholic101]

Hello, you are so kind to leave me a comment! If you have any other better ideas, please share them with me! Wishing you health and happiness always!

[@user-gt9kz5mu1r]

本当ですね！プラリペアお高いですがこれだと500円位で出来て嬉しい～

[@morganmartins3940]

This is VERY cool!!! That solution for the screws!!!

[@creationholic101]

"Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things! "

[@halkey]

I so love repare something. Superb😆 素晴らしいです！

[@creationholic101]

"Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things! "

[@peekaboo4390]

Ground wood charcoal, pure cocoa powder and used coffee grinds can also achieve the same results, virtually any powder will work.

[@TheRationalPi]

Ooh, and those wouldn't produce fumes in the same way as baking soda does. Very good info!

[@dotarsojat7725]

Use Decaf grounds, if you’re gluing close to bedtime!

[@peekaboo4390]

@@TheRationalPi Cocoa powder and wood charcoal can also be used in two part epoxy for repairing bakelite the black or brown versions of it. I restore among other things old vintage tube radios and this method works a treat along with using superglue with cocoa or charcoal.

[@testodude]

what about baby powder and tang?

[@TheRationalPi]

@@testodude As a filler or a drink combination?

[@Tys_Place]

I’m convinced that this guy could build a house with super glue and baking soda

[@creationholic101]

Welcome to Creation Holic channel! Hope you have a good time while watching the video

[@david72189]

Très bonne trouvaille 👍

[@user-so1kt8jo7i]

This is amazing! I was shocked when I saw this video This enriches my life. thank you! From Japan with love❤

[@creationholic101]

Hello! Welcome to Creation Holic channel. I am very happy to read your comment. Have a good day!

[@BIOSHOCKFOXX]

Try simply flour, I want to figure out if it's the texture that does that, or specifically a chemical compound of soda, because it might be just a powdery stuff and not specifically a soda.

[@joeuser633]

Not sure about flour but I have used graphite powder when I needed it to be black.

[@creationholic101]

I tried flour and it didn't work

[@Dave--FkTheDeepstate]

Good tips. Thanks. For tip #5 at 4:07, probably quicker to use a toothpick (equivalent) or two in the hole instead.

[@creationholic101]

Hello! thanks for your recommendation. Wish you all the best!

[@inspector_7152]

The one with the dull screw head is brilliant! I’l remember that one for the rest of my life!

[@creationholic101]

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

[@micheal5973]

Been using super glue and baking soda for years for model making. But the taking out a stripped screw with it got me.

[@creationholic101]

Welcome to Creation Holic channel! Thank you so much for your comment! have a nice day!

[@laisyu5004]

It's very useful. Thank you.

[@creationholic101]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@御小綠]

塑料鎖點斷裂，用瞬間膠+蘇打粉或香煙濾棉黏回去後，強度比斷掉之前更強更堅固，也是可以省一筆錢的做法。

[@creationholic101]

hello and thank you very much for your recommendation! Wish you the best!

[@MichaelSygo1]

I will be useing these ideas in the future I'm sure, thanks

[@creationholic101]

Welcome to Creation Holic channel! Thank you so much for your comment! Please feed back to me after you try it. have a nice day!

[@johnrobinson5156]

Works like JB Weld, neat

[@creationholic101]

Hello! Welcome to Creation Holic channel. I am very happy to read your comment. Have a good day!

[@AshH0220]

好多有趣又有用的使用方式 👍🏻

[@creationholic101]

Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!

[@TizianoVian]

kzbin.info/www/bejne/np6nmYFrr51omck

[@maraprotta2339]

Incrível! Recuperei o puxador de um pote de acrílico cuja tampa é vedada sob a pressão que é feita justamente por esse puxador. É uma peça bem pequena e ficou muito mais resistente do que a estrutura original. Valeu mesmo!!!!

[@creationholic101]

Hello. Thank you so much for your positive feedback! Wishing you health and happiness always!

[@user-ul3kv2ek2l]

素晴らしい！日常的に使えそう！

[@creationholic101]

"Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things! "

[@guyelluzzi2705]

All of these ideas are good, but the last one is genius!

[@creationholic101]

Hello! thanks for your comment. Wish you all the best!

[@almirdoudement6514]

Muito obrigado pela aula. Será muito útil no dia a dia. Saudações do Brasil 🇧🇷.

[@creationholic101]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@medic53067]

I was just wondering what the “setting” time is for the glue/baking soda mix is? Is there time to apply it and work it into gaps? I’m going to try it to fill a gap between the hood and fenders on a model car I’m building. Will it work with Gorilla Glue CA Gel? It’s a bit thicker than standard CA glue.

[@FLY2KO]

instant

[@johngraves6878]

Superglue sets real fast, that's the amazing part!

[@medic53067]

@@FLY2KO yeah…! I tried it out with Super Thin CA and holy crap! Less than 5 seconds! And really strong as well! And you don’t need too much baking soda, just enough for the CA glue to mix with and form a goo! It can be levelled off if you’re ready to work it as soon as you add the glue.

[@markkinsler4333]

A couple of minutes if it has to soak into wood. Otherwise it can sometimes glue the screw into the hole.

[@creationholic101]

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

[@gutspraygore]

Baking soda is a helluva drug.

[@creationholic101]

☘☘☘

[@muraoku8760]

日本からきました、目から鱗の動画でした。

[@creationholic101]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@alessandrorigobello7551]

i glued chess pieces to chessboard like that. so the world champion could not move and beat me

[@creationholic101]

😅😅😅

[@bluejewel3265]

한국에서 봅니다 베이킹소다랑 순간접착제 조합 배워갑니다 고마워요

[@creationholic101]

Thank you! Cheers!

[@jml8745]

마지막 미쳤다. last one.. crazy..

[@lydiequilliot5288]

From Britany in France. Good ideas. A bientôt

[@creationholic101]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@nagatamaneginegi]

この動画のおかげでトイレのドアノブ修理出来ました！ありがとうございます！

[@creationholic101]

Glad it helped!

[@masakazumiki]

コレは、嬉しいアイデアですね〜っ😁 　　是非、活用させていただきますっ‼️

[@creationholic101]

"Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things! "

[@red-xl6fi]

works better than the instant noodle hack!

[@ronpage1994]

Love the Benny Hill sound effects.

[@antonioalfonso2007]

Muy buenos videos , desde Gran Canaria

[@Marine_0317]

One word "AWESOME".

[@creationholic101]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@JuanRojo-bv7jm]

thank you

[@user-ut8fm5xr3z]

ネジは、は？って思ったけど・・・ネジ山破損しないくらいの強度が得られるね！凄い

[@user-hh2vu5wm6l]

Hello! this is wonder idea! I've had the scales fall from my eyes! I'll use this idea right away. Thank you!

[@creationholic101]

Glad it was helpful!

[@Alotipsalo]

WOW!!! Thank you so much for sharing your tips and tricks with all of us and I’m very impressed 😊

[@creationholic101]

You are so welcome!

[@e2no450]

대한민국 im south korean

[@tmsgva8572]

super merci

[@BeSafety]

カッチカチに！

[@Central-wu4oj]

Ur amazing Man !

[@bittersweet7022]

すごい👍早速試してみます。Thank you😊

[@creationholic101]

I'd love to hear if you've tried this idea yourself or if you have any other creative suggestions to share

[@johnpaulbacon8320]

Great informative and educational video

[@creationholic101]

Glad you think so!

[@user-hx8np9bm1w]

これはスゴい！ バイクとかのパーツを作ってみたいです！！

[@creationholic101]

Welcome to Creation Holic channel! Thank you so much for your comment! Please feed back to me after you try it. have a nice day!

[@clowngod_hk]

Amazing repairing skills

[@creationholic101]

Thank you! Cheers!

[@mylenemartin2122]

Bonjour je suis en France merci pour vos idées 😊

[@Smannellites]

Some clever ideas here.

[@creationholic101]

I'm glad you enjoyed this project! Feel free to connect with other viewers in the comments section and share your results. It's always inspiring to see what everyone creates

[@terceladdict]

Hi, I‘m from Swizerland. The fix of the headlight of my scooter was broken. This permit me to repare it and save me from changing the whole „fairimg“. Thanks a lot.

[@creationholic101]

"Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things! "

[@cdh180]

Can this be used on high temperature items? I want to use it to glue my exhaust pipe screws

[@creationholic101]

Please try it and let me know the results

[@user-nu8qt8zd9n]

日本で見てます👍

[@creationholic101]

Welcome to Creation Holic channel! Hope you have a good time while watching the video

[@ferdinandbasques7715]

TRES INGENIEUX... MERCI DE NOUS FAIRE PARTAGER... QUE DE BONNES IDEES.... 👍👍👍👏👏👏🙏🙏 UN BRICOLEUR MARSEILLAiS

[@creationholic101]

"Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things! "

[@rasor6216]

dad: what are you doing.. son? son: um.. i'm fixing..(ahchoo!)

[@creationholic101]

😊

[@user-sf2yc3un6o]

これは勉強になりました！今度試してみます。ありがとうございました！

[@creationholic101]

Welcome to Creation Holic channel! Thank you so much for your comment! Please feed back to me after you try it. have a nice day!

[@user-ry7xx2tc6b]

Great idea! It seems very useful. thank you！ from JAPAN🇯🇵

[@supers0nic77]

This comment is jdm af

[@hwoarang6267]

very good! thank..!