Motorcycle Caliper Reconditioned Using Cerakote Ceramic Coating.

[@chadh4343]

Great video Jim! The quality of your work is beyond reproach. I’m going now for breakfast and ordering some waffles.

[@tomevans4078]

Was gonna go for a ride but I think you may have inspired me to do the calliper rebuilds I have been putting off. Great video, love your attention to detail and very envious of your workshop set up. I’m sure it’s been said before but please don’t chastise yourself for ‘waffling’ it’s all useful information to us amateurs.

[@FatherOBlivion]

Hadn't thought of that method for removing pistons. I've been using an air compressor and rubber stoppers. A quick blast pops 'em right out.

[@victorgonza4528]

Outstanding , nice work Jim .

[@mickdelaney2570]

Glad to have you back love your stuff 😁

[@WiiKung]

17:12 "Today is tomorrow", words to live by and not waste a day.

[@miguelpaolino6508]

You should look into vacuum ovens, that is the best way to really dry something, they are not that expensive. Source: I worked in an satellite factory that use them to dry and degas electronics that are ultrasound cleaned in isopropyl alcohol and also degass drying painted parts.

[@kevinmartin5960]

Great video Jim, don’t apologise for waffling, very helpful to some of us. Keep up the videos please.

[@FM_1984]

Awesome and clean job as usual. Great video Jim.

[@katiejohns3415]

Great video Jim very informative thanks

[@SuperbikeSurgeryTV]

Thanks Mate 👍

[@cozydram1]

awesome stuff..........your not waffling your educating!!!!

[@paullanham1014]

Whoop! Worth the wait!

[@AnabelaFontesAddison]

Know you are an expert but i have had success shifting stuck pistons with a grease gun on the bleed nipple , messy but works ,

[@ReagueOfRegends]

You're a treasure Jim.

[@dannykimble7671]

Good stuff mister, just one query you could mention, are there such things as tapered seals that require fitting the correct way round, I’ve heard about them but never seen them & nobody seems to give much information about them. Keep up the good stuff. Regards

[@taswr]

Been a while….. 🤘🏻

[@twowheelunacy]

Hi Jim, where do you get all of your workshop/maintenance manuals from please,thanks 👍

[@SuperbikeSurgeryTV]

I've just collected them over the years. I don't wanna sound like a Salesman, but if you become Patreon (1$ a month), you get access to our Discord Chat Group. Everyone has uploaded all the service information they have into a big database, and you get access to all of it.

[@twowheelunacy]

Ok, I'm not sure how to become a Patreon but I'll check it out. Your videos are really good, excellent info so I would like access to the manuals of course and continue watching your endeavours!

[@SuperbikeSurgeryTV]

​@twowheelunacy If you look in the video description on most of my recent videos you'll find a link to join my Patreon. After that you will need to download the Discord app to your phone. play.google.com/store/apps/details?id=com.discord And then connect your Discord and patron accounts! It all sounds very complicated but in reality quite simple. Hopefully see you in Discord 👍

[@twowheelunacy]

@SuperbikeSurgeryTV ok, thanks, I'll check it out and thank you for responding so quickly 🏍👍

[@stephenkramme7063]

Hello Jim, very much enjoy your channel. This caliper rebuild again demonstrates your thoroughness. I have several questions specific to this video regarding lubricants. What red colored grease (Wurth) was used to help seat the seals in the caliper bore? I would assume this grease would be compatible with various brake fluids. What non-petroleum based lube did you use on the rubber seal for the guide pin? I have used Wurth "Silicone Lubricating Compound", bid red & white squeeze tube, with good results. Thanks again for sharing the detailed nature in how you work

[@Arachnoid_of_the_underverse]

Looks a great finish but why not the bracket or is it a customer request?

[@SuperbikeSurgeryTV]

Wanted it original and that's how it is out of the factory 👍

[@gordwoods7775]

haha great video i like the passion and what you call waffling. i know it is from a real person and not a actor.

[@paultanton4307]

Excellent work again Jim thanks,a couple of questions - with the corrosion you pointed out around one of the Piston Bores would it not be prudent to Cerakote as much area as you can without getting any into the Bores,there is a lot of Bare Ally left after your processes,and also you correctly stuck to OEM replacement parts but would you consider Stainless Steel Pistons in this case ,do they prevent any sticking as you might expect ?.

[@SuperbikeSurgeryTV]

Yes you could Cerakote all of it up to the bores. Customer wanted it as original as possible though. You could also use stainless pistons but to my knowledge there not available. If you could get them you'd likely be adding unnecessary expense. The standard pistons are very good if looked after/kept clean. Thanks for the comment. 👍

[@jodylarue2312]

How did these hold up at that ratio? I wanted to coat 12:1 on burnt bronze calipers but I was concerned at how they would hold up at motocross track.

[@EE9Civic]

Thanks for the video. Nice job done. Your media blaster looks to work quite well, which one do you use? Also, is your vapour blasting cabinet one that you converted?

[@SuperbikeSurgeryTV]

Can't remember the make of the blasting cabinet, it's not massive, but perfect for the small Cerakote jobs I do. Yes it's the same Vapour blasting cabinet.

[@Bumbaclot213]

Had a bit of a weep one of my callipers of my 07 ZX6R, from where the brake-line sits on the calliper body - replaced with brand new copper crush washers and was still weeping. So I did I did a bit of research and order dowty washers, which solved the problem, but were slightly oversized for the recess the bottom washer sits upon and couldn’t remove it when rebuilding them recently. So my my question is, how can I prize out that washer?

[@Bumbaclot213]

I used a foot pump to get mine out!

[@Ausblack]

Could you cerakote the piston / bores or would the brake fluid peel it off

[@Tyerone1337]

You don’t want to coat any moving parts

[@ronferris8354]

yes you can with H series or E elite series, its not affected by brake fluid and is as thick as anodise which is done by Brembo ect. So its been done by most calliper restorers now.

[@denwiessimo6088]

Was this a commercial for brake grease and ceracote? The tubes of grease were obviously untouched.

[@SuperbikeSurgeryTV]

Sorry, don't understand the comment?

[@RaulMotoADV]

👏🏽👏🏽👏🏽👏🏽👏🏽👏🏽👏🏽

[@bandit12--]

I was quite impressed until the grease bit. Also suprised that you felt strongly about fingers on the cerakote yet happy to contaminate the brake fluid 🤷‍♂️

[@SuperbikeSurgeryTV]

You sound so sure of yourself 😂😂 It's called bremszylinder grease, and it's specifically made for that exact purpose.

[@N269]

An m5 allen would have easily removed that slider pin...????????????????????????

[@raymorris952]

You do very nice work, but I have to watch your video at 2x speed with the sound off, 😂, way to much waffling

[@MarkPearce-u7m]

Probably close your eyes too. 😂

[@qivarebil2149]

For Gods sake! Get to the point!