Supervent /Selkirk Chimney Replacing Rusted Out Top Plate Through The Wall Mount Kit By KVUSMC

Selkirk Chimney Replacing Rusted Out Top Plate Through The Wall Mount Kit . The company Selkirk Chimney Was awesome they sent me all new parts covered under A limited lifetime warranty They were very helpful Price was the guy I dealt with the warranty work and tech support they are Awesome Many Thanks For Watching God Bless and Semper Fi Please Subscribe
Selkirk Customer support 800.992.8368
www.selkirkcorp.com/contact-us

[@gerardmacintyre9274]

Hey Kenneth, just had to do the same thing on my Supervent, looked just like yours. Didn't know how to support 33 feet of chimney but your 2x4s and rubber solved the issue and saved a bunch of money. Cheers.

[@KVUSMC-KU4SMC]

Your So Welcome Brother I'm glad I could help out Cheers Brother Kenny

[@brainswole101]

I like that your extension bracket from the exterior wall to the chimney base has a place to securely connect the two together vs the shelf style ones I've seen on KZbin. I'll be mimicking that for my install. As well as copper antiseize. Thank you!

[@KVUSMC-KU4SMC]

Your Very Welcome Brother I'm glad I could help you out Cheers Kenny

[@terrymaines69]

Good to see Super vent stood behind this I have that pipe with no elbows! Thanks for the info keep burnitng

[@KVUSMC-KU4SMC]

Yes Sir Sure is Buddy They are a great company

[@dannydunnagan3267]

Good job Kenneth for a man who does know what he doing does that tv antenna still pick up good I have one on my house that,s all we use and it picked up 52 channels no satellite for me we cut the cord 12 years ago.

[@KVUSMC-KU4SMC]

Thank you Brother yes I still get Around 60 channels on a good night

[@4460cows]

Just this weekend I cut out my interior and exterior walls for the Dura Plus Pro Wall Thimble. Next will need to build a support something like you did because my eves are enclosed so want to go straight up like you did to support the T up to the chimney run. Nice to see after 7 years of use maybe I can get more years by taking advantage of your suggestions here. England Stove Works wood. First built me a proper hearth then I placed the 250+ pounds of stove onto. Next is plumbing the venting. Did not want to go up into the attic and onto the roof because I have a second home and that is the way it is installed. I wanted a simple way to clean out that is why I choose the wall thimble to the T support method like you did. Looking forward to my next weekend to build the T support extension.

[@KVUSMC-KU4SMC]

Your doing the right thing Buddy for Sure that will be awesome good luck and be safe Cheers Kenny

[@redsquirrelftw]

Oh crap I just installed one of these, really hope this is something that they fixed in newer models.

[@KVUSMC-KU4SMC]

You Should Be Fine it has a life time warranty on it

[@PawPawMountain]

Kenneth, You do good work, that should last for years!

[@KVUSMC-KU4SMC]

Thank you Brother I appreciate it 🙏 David

[@johnserrano9689]

The best possible set up is 24 gauge black single wall pipe man. The fast coat of "soot" will insulate that pipe great. Then you want to burn wood with 35% moisture content or more. Online help like I just gave is hard to come by 👍 hahaha Only funny because I know you know better, and I bet we both know crazy bastards who have actually done it

[@KVUSMC-KU4SMC]

I know what you mean Buddy LOL

[@johnserrano9689]

@@KVUSMC-KU4SMC excellent video, and a dam good idea. Friend of mine had a similar issue, of course he found out the same time his stack "looked funny" considering how serious of a potential problem that is he's lucky he noticed that before he fired the stove up. So again excellent video

[@copdwarriormcdonald7968]

OORAH Semper Fi Brother

[@KVUSMC-KU4SMC]

SEMPER FI BROTHER OORAH Devildog

[@NormanMcGregor]

I have a different version as its totally different. The cleanout is built right into the T pipe and it sits right on the support frame. There is no additional mount like on yours.

[@KVUSMC-KU4SMC]

That is Awesome you must have the Canadian Version They treated me very well Brother Norman I was surprised That is a great design 👍 It is fixed Thank Goodness

[@danbrown8542]

Good video brother local 169 myself for 15 yrs

[@danbrown8542]

And also in tbe Corps for 10 yrs!

[@KVUSMC-KU4SMC]

Awesome Dan Nice to meet you Brother Boilermaker and Brother Marine Semper Fi

[@danbrown8542]

@@KVUSMC-KU4SMC semper fi

[@WR-mf2ne]

About to install same setup on a cabin. What's the overhang on the gable where your pipe runs? Semper fi

[@KVUSMC-KU4SMC]

The over hang is 14 inches buddy

[@abrammatthew756]

What if I don’t have room for the triangle support bracket underneath the T because of a window? Could you install that support bracket in between a couple of the 36 inch stove pipe sections just up a little bit and have maybe 1 36 inch section and the T below? Im using supervent brand

[@KVUSMC-KU4SMC]

I don't See why not Buddy

[@quickspoolgarage]

Nice job! What is the outside diameter of the pipe and what brand is it.

[@KVUSMC-KU4SMC]

It Is Supervent / Selkirk I believe it is 10 inch buddy

[@Lefishn]

Ok can we get an update if the Anti seize helped

[@KVUSMC-KU4SMC]

Yes The antiseize Is working Buddy I check it out almost every Week Yes it is working no Corrision

[@Lefishn]

@@KVUSMC-KU4SMC well looks like I'm putting some on for my install this week, thanks

[@Davidv851]

Did you make the extension bracket / box, or buy it somewhere? How thick is the steel? And is it stainless? Or painted?

[@KVUSMC-KU4SMC]

HI buddy I used Some Angle and Built it myself Brother it is Painted Stainless Would Have been Nice to Use

[@johnnyfoo8737]

how did you seal on the thimble where your 36" pipe came through to the outside? Im has a gape .

[@KVUSMC-KU4SMC]

Run that question by me again Brother I will try to help out any way I can

[@johnnyfoo8737]

@@KVUSMC-KU4SMC ok where the pipe comes out from outside wall to the tee how did you seal around the pipe and the outside wall

[@KVUSMC-KU4SMC]

@@johnnyfoo8737 I used A piece tin over the top to keep the rain out I have About 1/8 inch gap all the way around on mine you could use some high heat Silicone if you want or some would Stove Gasket material To seal the gap buddy I hope this helps

[@dailylife6432]

What length of pipe did you use to go thru the wall.??? Thanks Roy.

[@KVUSMC-KU4SMC]

Hi buddy I used 3 foot /36 " I hope this helps Brother

[@dailylife6432]

@@KVUSMC-KU4SMC ok i am installing that exact kit and i dont want to cut my eave. So you have a good draw.

[@KVUSMC-KU4SMC]

@@dailylife6432 Amen Brother don't cut the eave I agree I have A great draw Brother 👍

[@frankcrow4594]

How much overhang does your roof have? I’m preparing to install my kit, I got a 20” overhang. I’m hoping that a 24” pipe will get me past it. What you think?

[@KVUSMC-KU4SMC]

HI Buddy I have around 18 inches of overhang You should be fine I'm using a whole Section Buddy A 36 inch

[@frankcrow4594]

@@KVUSMC-KU4SMC I really appreciate your input. I do have a 36” section worst case scenario. Thanks again. By the way how does the stove run with the 36”?

[@KVUSMC-KU4SMC]

@@frankcrow4594 Super great Brother She will glow Red If I let her the Stove that is Brother

[@holymoly271]

​@@KVUSMC-KU4SMCreally enjoyed you video. Especially, everything is going to be okay part. I've save my nickels and dimes and have a new stove to install. My overhang is 12 inches with a 12/12 pitch roof!! Question:how did you pass code with 3 feet in the wall? Aren't you concerned about insurance company?. My instructions say through the house/roof OR through the wall/overhang. Isn't your setup against the specs? Last thing I need.is a fire in the house that insurance doesn't pay for. Maybe the pitch is what complicates it. METAL Roof to boot!😮