Really impressive board making, video editing and music selection, good on ya mate!
@FlintF3 жыл бұрын
Would love an update on this. Great work.
@eylulacik2 жыл бұрын
The video is so helpful. But is it better to do a decorative surfboard from wood(pine), mdf or from polystyrene? I want smth light but also durable. And what is the best way to coat the ellipsoid areas? It’s hard to give curves smoothly I guess.
@sujstet Жыл бұрын
Nice video... have you surfed with it yet... Also what thickness did you start with.... You have got a really perfect joint as it is not seen at all
@stevenrldenault74516 ай бұрын
Hi Jan , great video. What glue or adhesive did you use to glue up the styrofoam pieces. Thank you, Steve (68yrs) Manitoba
@davidbranson78463 жыл бұрын
Thanks for the great video, just one question that how you know the rock of the eps before you cut it? Thank you!
@wingfoiladvice Жыл бұрын
Hi nice work but you did only one layer of vtr? 200g mq?
@theswimclub8582 Жыл бұрын
well done... what is the glue you have used
@huseynelizade38383 ай бұрын
What do you put on the fiberglass at the end?
@Huseynandsurfvibes3 ай бұрын
What is the name of the substance you applied on the fiberglass?
@jamie-ox8sg3 жыл бұрын
what epoxy did you use ?
@prasannakumar98383 жыл бұрын
Very nice everything is ok. But I didn't understand the sizes. Can you share the sizes with me
@WaveWasters3 жыл бұрын
Have you surfed this yet? and how did it go?
@annaFry-n6p3 ай бұрын
Where did you get the styrofoam from?
@bigbadstretch13yrago3 жыл бұрын
Fricken awesome work mate. Envirowarrior🤙
@elisevella81634 жыл бұрын
Hey, love this video! How did you position your foam to make it strong is it like bricks or just stacked on top of each other?
@janrohrer59034 жыл бұрын
thanks, yes I stacked them like bricks
@zackeryhanley10972 жыл бұрын
@@janrohrer5903 what did you put on the board?
@janrohrer59032 жыл бұрын
@@zackeryhanley1097 a few layers of fiberglass and on top of that layers of clear epoxy resin
@sailingsolo52902 жыл бұрын
@@janrohrer5903 A old surf shaping legend i worked with for 10 years backmin the 80s terry martin used to make boards out of the yuka tree that grow wild in southern cal. There like balsa kinda. Go harvest a few and see what you can do, terry passed at 74 about 5 years ago. From melenoma.
@pattoFN Жыл бұрын
any chance you could link the word doc to the peices of paper where you lined them up t make the shape ?
@janrohrer5903 Жыл бұрын
I‘m sorry to disappoint you but it was such a long time ago that i dont have the files on my computer anymore:(
@tomchristensen2914 Жыл бұрын
So you didnt shown how You inserted the spine
@elisevella81634 жыл бұрын
Also what glue did you use to glue the foam together?
@janrohrer59034 жыл бұрын
Special styrofoam glue from the hardwear store
@jezlucas3878 Жыл бұрын
Was it heavy the blank
@geofn18562 жыл бұрын
what’s the line down the middle? i want to make my own board but i keep seeing the line down the middle and i’m just wondering what it is, is it wood?
@HStiglitzz Жыл бұрын
Yes, it’s a stringer.
@ecomarinebd Жыл бұрын
May I have the printable template? Thanks
@suportaslokal97473 жыл бұрын
Wow so amazing🥰, how did you make the paper that has the size of a surfboard?
@suportaslokal97473 жыл бұрын
I'm from Philippines 🤙🏻🏄🏾
@suportaslokal97473 жыл бұрын
Nooooticeeee
@patefutch61682 жыл бұрын
Hey you did alright but with the fiberglass you need to snip it and tuck it with your squeegee
@edippoliti45314 жыл бұрын
Hi ,thanks for the great lesson ,where do you buy the styro foam?
@markuslebt4 жыл бұрын
drive by your local industrial area, some shops have huge amounts of styrofoam left over from the products they get shipped.
@janrohrer59034 жыл бұрын
Nowhere! It‘s recycled ;)
@thomastimm45292 жыл бұрын
Really nice video. Would be nice to see some footage of you surfing this beauty. Do you live in Germany?
@janrohrer59032 жыл бұрын
Danke. Nein ich komme aus der Schweiz und ich habe leider keine videos vom surfen
@prasannakumar98383 жыл бұрын
Can we use thermocol instead of foam
@minnermouse3693 жыл бұрын
How much would it cost me to get one of these from you? My 8yr old loves it for his room display
@notcosmiclobsternoooo1183 жыл бұрын
You're better off just getting a dinged up board from a pawn shop. This not a toy, it's a real surfboard. A lot of labor and supply costs. This is how any regular surfboard is assembled, the only difference is he recycled EPS foam from other surfboard blanks he already had. If he wanted to he could sell them for bookoo bucks.
@minnermouse3693 жыл бұрын
@@notcosmiclobsternoooo118 thanks for the info very much appreciated
@lucascastella78983 жыл бұрын
you should do a vid making and attaching the stringer.....great vid though man!
@Surfmus3 жыл бұрын
I have a few.
@Nertosff3 жыл бұрын
I dont have a fiberglass cloth can I replace it with something else available in any house
@caseysmith5442 жыл бұрын
That can be easily bought online.
@anshu48533 жыл бұрын
Can you post template of surfboard
@DmitryLapshukov2 жыл бұрын
How does it ride?
@henkvanderbrom93042 жыл бұрын
I realy want to make one too. Please send me the plans
@janrohrer59032 жыл бұрын
I dont have them anymore, sorry But it‘s quite easy to find a template for a 6‘4“ on the internet
@southpause86133 жыл бұрын
Good work
@youwantcale4 жыл бұрын
Super rad! Want to do this but not sure if styrofoam is strong enough to hold up, have you surfed it yet?
@dadyking12104 жыл бұрын
Most Styrofoam packaging is polystyrene which is what they make most surfboards out of. So, as long as you glue the board correctly together and seal it with some resin it should be good to go. A note though is, you have to be careful painting/glassing poly styrene. Some resin will melt the foam, some paint will melt the foam. So make sure to test your materials on a small piece before just applying it to a whole board.
@TwoOceansOneBreath3 жыл бұрын
Love it, I am going to do it. how did you make / what did you use for the stringer?
@janrohrer59033 жыл бұрын
Hey, I used an old piece of plywood from a shelf
@ubocnccom2 жыл бұрын
@@janrohrer5903 we have cnc surfboard shaping machine ,maybe help you impove efficent:kzbin.info/www/bejne/pnLHaXqKfL1-hbM
@liamstone34373 жыл бұрын
Did you use polyester resin? Does it melt the foam at all?
@janrohrer59033 жыл бұрын
No! You have to use epoxy resin!
@liamstone34373 жыл бұрын
@@janrohrer5903 ok what brand of resin did you use to avoid destroying the foam?
@janrohrer59033 жыл бұрын
@@liamstone3437 it was 3 years ago, i dont know anymore, sorry
@SukryRonde8 ай бұрын
Interesting, wow, that's so nice
@diegosilva28169 ай бұрын
Muy buen vídeo
@Jason-TheChad-Muska_circa1995 Жыл бұрын
Here I thought that this guy was just trying to create and find himself a good surfboard. However they're watching the video realize that what he really wants is "a good man that will treat him right and all through the night". Not my cup of tea dude but hey if that's what you're into then do your thing.
@joshyost31553 жыл бұрын
Moving to peurto rico and going to rent surf board and figured could make them like this
@LitChannel-x4u3 жыл бұрын
Whats the name of the numbers
@henkvanderbrom93042 жыл бұрын
Hello can u please send me the drawings of the board
@henkvanderbrom93042 жыл бұрын
Oo ok. Thnx for youre answer
@yomo7814 жыл бұрын
Please how can I void Risen melting the foam
@edippoliti45314 жыл бұрын
I heard you have to use epoxy resin, not polyester resin, or else it will melt polystyrene ,I'm building one now ,but inadvertantly bought polyester resin, but luckily I saw another video saying not to use polyester resin on this ,or it will melt it .
@janrohrer59034 жыл бұрын
exactly! You have to use epoxy resin.
@sailingsolo52902 жыл бұрын
Thats a rough looking board. But A for effort.
@lanewatson50032 жыл бұрын
Good job next time can u name material
@joeytaylor87673 жыл бұрын
Where is the next video?
@janrohrer59033 жыл бұрын
That was a school project from 3 years ago.. i dont have the time rn to do a next one, sorry :/
@joeytaylor87673 жыл бұрын
You did a good job and had good music. I wanted to see the board done.
@lrs14102 жыл бұрын
Siiick!
@justlily86103 жыл бұрын
Hi what did you use to stick the foam ?
@nordblick3 жыл бұрын
Would like to know more about the used glue as well.
@strange18994 жыл бұрын
Nice
@janrohrer59034 жыл бұрын
Dangge dangge
@kevinalmeida71593 жыл бұрын
low density!!!! oh hell naw. it has to be crate density like stuff comes with appliances that stuff is so hard
@hazedayz83073 жыл бұрын
i ha nomau e frag sorry hahaha. I ha iz o uf so re dütsche siitä gsee ds es glasfasere hett abr es git nur 110g und 163 g und es heisst Glasfilament gewebe. meinsh das geit odr ish ds sogar z gliche wo du bsteut hesh odr was hesh du fr nes gwicht bstellt
@janrohrer59033 жыл бұрын
hey ich weiss es nüm es isch scho es paar jahr her, sorry. Es cha aber guet sii das es so öpis gsi isch...